Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Natural vibrations of laminated anisotropic plates using three-dimensional elasticity theory

The paper contains a description of the three-dimensional elasticity equations and the associated finite element model for natural vibrations of laminated anisotropic rectangular plates. The numerical results for natural frequencies are compared with those obtained by a shear deformable plate theory. A number of cross-ply and angle-ply rectangular plates are analyzed for natural frequencies. For relatively thick plates, the shear deformable-plate theory element predicts frequencies higher than those predicted by the three-dimensional elasticity theory element.

Reddy, J. N.↗
NASA NTRS1984

Postbuckling of long orthotropic plates loaded in combined transverse compression and longitudinal compression or shear

The postbuckling behavior of simply supported, rectangular, isotropic and orthotropic composite plates under combined loading is determined analytically. Results are presented for a long plate loaded beyond its buckling load in either a combination of longitudinal and transverse compression or a combination of transverse compression and inplane shear. Results show that orthotropic plates may behave differently than isotropic plates for these loading conditions. Results also show that the postbuckling behavior of plates in shear with constrained edge displacements is markedly different than their behavior with stress free edges.

Stein, M.↗
NASA NTRS1984

Natural vibrations of laminated anisotropic plates

This paper contains a description of the three-dimensional elasticity equations and the associated finite element model for natural vibrations of laminated rectangular plates. The numerical results for natural frequencies are compared with those obtained by a shear deformable plate theory. A number of cross-ply and angle-ply rectangular plates are analyzed for natural frequencies. For relatively thick plates, the plate element predicts frequencies higher than those predicted by the 3-D element.

Reddy, J. N.↗
NASA NTRS1984

Pin-loaded holes in large orthotropic plates

Pin-loaded holes commonly occur in engineering structures. However, accurate analysis of such holes presents formidable difficulties because of the load-dependent contact of the pin with the plate. Significant progress has recently been achieved in the analysis of holes in isotropic plates. This paper develops a simple and accurate method for the partial contact analysis of pin-loaded holes in composites. The method is based on an inverse formulation that seeks to determine loads in a given contact-separation configuration. A unified approach for all types of fit was used. Continuum solutions were obtained for infinitely large plates of various typical orthotropic properties with holes loaded by smooth rigid pins. These solutions were then compared with those for isotropic plates. The effects of orthotropy and the type of fit were studied through load-contact relationships, distribution of stresses and displacements, and their variation with load. The results are of direct relevance to the analysis and design of pin joints in composite plates.

Mangalgiri, P. D.↗
NASA NTRS1984

A refined nonlinear theory of plates with transverse shear deformation

A higher-order shear deformation theory of plates accounting for the von Karman strains is presented. The theory contains the same dependent unknowns as in the Hencky-Mindlin type first-order shear deformation theory and accounts for parabolic distribution of the transverse shear strains through the thickness of the plate. Exact solutions of simply supported plates are obtained using the linear theory and the results are compared with the exact solutions of three-dimensional elasticity theory, the first order shear deformation theory, and the classical plate theory. The present theory predicts the deflections, stresses, and frequencies more accurately when compared to the first-order theory and the classical plate theory.

Reddy, J. N.↗
NASA NTRS1985

Stability and vibration of isotropic, orthotropic and laminated plates according to a higher-order shear deformation theory

A higher-order shear deformation theory is used to demonstrate the natural frequencies and buckling loads of elastic plates. The theory accounts for parabolic distribution of the transverse shear strains through the thickness of the plate and rotary inertia. Exact solutions of simply supported plates are obtained and the results are compared with the exact solutions of three-dimensional elasticity theory, the first-order shear deformation theory, and the classical plate theory. The present theory predicts the frequencies and buckling loads more accurately when compared to the first-order and classical plate theories.

Reddy, J. N.↗
NASA NTRS1986

Plate motions and deformations from geologic and geodetic data

Research effort on behalf of the Crustal Dynamics Project focused on the development of methodologies suitable for the analysis of space-geodetic data sets for the estimation of crustal motions, in conjunction with results derived from land-based geodetic data, neo-tectonic studies, and other geophysical data. These methodologies were used to provide estimates of both global plate motions and intraplate deformation in the western U.S. Results from the satellite ranging experiment for the rate of change of the baseline length between San Diego and Quincy, California indicated that relative motion between the North American and Pacific plates over the course of the observing period during 1972 to 1982 were consistent with estimates calculated from geologic data averaged over the past few million years. This result, when combined with other kinematic constraints on western U.S. deformation derived from land-based geodesy, neo-tectonic studies, and other geophysical data, places limits on the possible extension of the Basin and Range province, and implies significant deformation is occurring west of the San Andreas fault. A new methodology was developed to analyze vector-position space-geodetic data to provide estimates of relative vector motions of the observing sites. The algorithm is suitable for the reduction of large, inhomogeneous data sets, and takes into account the full position covariances, errors due to poorly resolved Earth orientation parameters and vertical positions, and reduces baises due to inhomogeneous sampling of the data. This methodology was applied to the problem of estimating the rate-scaling parameter of a global plate tectonic model using satellite laser ranging observations over a five-year interval. The results indicate that the mean rate of global plate motions for that interval are consistent with those averaged over several million years, and are not consistent with quiescent or greatly accelerated plate motions. This methodology was also used to provide constraints on deformation in the western U.S. using very long baseline interferometry observations over a two-year period.

Jordan, T. H.↗
NASA NTRS1985

The satellite magnetic anomaly of Ahaggar - Evidence for African Plate motion

The Ahaggar volcanic province of North Central Africa is considered a region of excess heat flow (hot spot) and hence elevated Curie isotherm. Using a modified version of the Parker FFT potential field representation, magnetic signals were calculated at Magsat altitudes for models in which the African Plate is both fixed and moving. The moving-plate model extends the Curie isotherm anomaly in the direction of plate motion and provides a satisfactory match to vertical component anomaly data when the magnitude of plate velocity is 0.75 cm/yr. Although the signal levels are marginal for the scalar component anomalies of this region, the same model provides an adequate match to this data set and is clearly preferable to a fixed-plate model.

Phillips, R. J.↗
NASA NTRS1985

The effect of slots on the buckling and postbuckling behavior of laminated plates

An experimental study was conducted to evaluate the effect of lateral slots on the buckling response, the postbuckling response, and the failure characteristics of flat rectangular graphite-epoxy plates loaded in compression. The slots did not significantly affect the prebuckling and buckling behavior of the plates. The slots caused local changes in the strain distribution and out-of-plane deformations near the slot. Failure loads and modes were strongly affected by slot location. Centrally located slots did not affect the failure loads or failure modes of the plates. Slots located close to an unloaded edge of a plate reduced the postbuckling strength of the plate and affected the failure mode. For one slightly offset slot location, interaction of out-of-plane deformations with the slot tip was observed to affect the failure mode significantly without affecting the failure load.

Gurdal, Z.↗
NASA NTRS1985

Metallic glass as a temperature sensor during ion plating

The temperature of the interface and/or a superficial layer of a substrate during ion plating was investigated using a metallic glass of the composition Fe67Co18B14Si1 as the substrate and as the temperature sensor. Transmission electron microscopy and diffraction studies determined the microstructure of the ion-plated gold film and the substrate. Results indicate that crystallization occurs not only in the film, but also in the substrate. The grain size of crystals formed during ion plating was 6 to 60 nm in the gold film and 8 to 100 nm in the substrate at a depth of 10 to 15 micrometers from the ion-plated interface. The temperature rise of the substrate during ion plating was approximately 500 C. Discontinuous changes in metallurgical microstructure, and physical, chemical, and mechanical properties during the amorphous to crystalline transition in metallic glasses make metallic glasses extremely useful materials for temperature sensor applications in coating processes.

Miyoshi, K.↗
NASA NTRS1987

Statistical tests for closure of plate motion circuits

Two methods, one based on a chi-square test and the second on an F-ratio test, of testing for the plate motion circuit closures are described and evaluated. The chi-square test is used to evaluate goodness of fit, and it is assumed that the assigned errors are accurate estimates of the true errors in the data. The F-ratio test is used to compare variances of distributions, and it is assumed that the relative values of assigned error are accurate. The two methods are applied to the data of Minster and Jordan (1978) on the motion of the three plates that meet at the Galapagos Triple Junction, and the motion of the three plates that meet at the Indian Ocean Triple Junction. It is noted that the F-ratio plate circuit closure test is more useful than the chi-square test for identifying systematic misfits in data because the chi-square test overestimates the errors of plate motion data.

Gordon, Richard G.↗
NASA NTRS1988

Optimum design of geodesically stiffened composite plates

With the goal of tailorability in mind, the in-plane stiffness characteristics of a particular grid stiffened plate configuration under axial and shear loads have been studied. The contribution of the skin to the stiffener network and the resultant skin/rib interaction is analyzed. For the given plate geometry and loads, it is shown that an optimum configuration does exist. To achieve optimally designed practical plate configurations, buckling constraints need to be included in the design. Due to the complex geometry and loading of the plates, a simplified local buckling analysis of isolated stiffeners and triangular skin elements between the stiffeners is considered. Development of a stiffener buckling analysis represent stiffeners as shear deformable plate elements is presented.

Guerdal, Zafer↗
NASA NTRS1988

Free vibration of rectangular plates with a small initial curvature

The method of matched asymptotic expansions is used to solve the transverse free vibration of a slightly curved, thin rectangular plate. Analytical results for natural frequencies and mode shapes are presented in the limit when the dimensionless bending rigidity, epsilon, is small compared with in-plane forces. Results for different boundary conditions are obtained when the initial deflection is: (1) a polynomial in both directions, and (2) the product of a polynomial and a trigonometric function, and arbitrary. For the arbitrary initial deflection case, the Fourier series technique is used to define the initial deflection. The results obtained show that the natural frequencies of vibration of slightly curved plates are coincident with those of perfectly flat, prestressed rectangular plates. However, the eigenmodes are very different from those of initially flat prestressed rectangular plates. The total deflection is found to be the sum of the initial deflection, the deflection resulting from the solution of the flat plate problem, and the deflection resulting from the static problem.

Adeniji-Fashola, A. A.↗
NASA NTRS1988

Intraplate deformation and closure of the Australia-Antarctica-Africa plate circuit

Plate motion data along the Southeast, Southwest, and Central Indian ridges have been reduced to 67 spreading rates, 38 transform fault azimuths, and 135 earthquake slip vectors in order to study the current motion between the Australian, Antarctic, and African plates and to investigate whether this plate circuit obeys closure. Magnetic profiles are modeled to determine rates consistently over a 3-m.y. time-averaging interval, and the new rates are shown to differ from published rates by as much as 5 mm/yr. The results indicate that Indian Ocean plate circuit nonclosure and the deformation that it suggests are much smaller than previously supposed, and support a model in which the significant deformation occurs in a diffuse plate boundary along the equatorial Indian Ocean between the Central Indian Ridge and the Sumatra Trench.

Demets, Charles↗
NASA NTRS1990

Multiple-Dynode-Layer Microchannel Plate

Improved microchannel-plate electron image amplifier made of stack of discrete microchannel-plate layers. New plates easier to manufacture because no need to etch long, narrow holes, to draw and bundle thin glass tubes, or to shear plates to give microchannels curvatures necessary for reduction of undesired emission of ions. Discrete dynode layers stacked with slight offset from layer to layer to form microchannel plate with curved channels. Provides for relatively fast recharging of microchannel dynodes, with consequent enhancement of performance.

Woodgate, Bruce E.↗
NASA NTRS1990

Postbuckling response of long thick plates loaded in compression including higher order transverse shearing effects

Buckling and postbuckling results are presented for compression-loaded simply-supported aluminum plates and composite plates with a symmetric lay-up of thin + or - 45 deg plies composed of many layers. Buckling results for aluminum plates of finite length are given for various length-to-width ratios. Asymptotes to the curves based on buckling results give N(sub xcr) for plates of infinite length. Postbuckling results for plates with transverse shearing flexibility are compared to results from classical theory for various width-to-thickness ratios. Characteristic curves indicating the average longitudinal direct stress resultant as a function of the applied displacements are calculated based on four different theories: Classical von Karman theory using the Kirchoff assumptions, first-order shear deformation theory, higher-order shear deformation theory, and 3-D flexibility theory. Present results indicate that the 3-D flexibility theory gives the lowest buckling loads. The higher-order shear deformation theory has fewer unknowns than the 3-D flexibility theory but does not take into account through-the-thickness effects. The figures presented show that small differences occur in the average longitudinal direct stress resultants from the four theories that are functions of applied end-shortening displacement.

Stein, Manuel↗
NASA NTRS1990

Three-dimensional solutions for antisymmetrically laminated anisotropic plates

Analytic three-dimensional elasticity solutions are presented for the stress and free vibration problems of multilayered anisotropic plates. The plates are assumed to have rectangular geometry and antisymmetric lamination with respect to the middle plane. A mixed formulation is used with the fundamental unknowns consisting of the six stress components and the three displacement components of the plate. Each of the plate variables is decomposed into symmetric and antisymmetric components in the thickness direction, and is expressed in terms of a double Fourier series in the Cartesian surface coordinates. Extensive numerical results are presented showing the effects of variation in the lamination and geometric parameters of composite plates on the importance of the transverse stress and strain components.

Noor, Ahmed K.↗
NASA NTRS1990

Pacific-North America plate motions - New results from very long baseline interferometry

The state of Pacific-North America plate interaction is updated using newest VLBI measurements and newly developed rigid plate tectonic models. Particular attention is given to examining the extent of relative motion between the Pacific plate and the North America plate as measured from their stable interiors, the evidence of Pacific plate deformation off the central California coast, and the distribution of path integrated deformaton east of the San Andreas fault. The information obtained on these questions is discussed in the framework of implications for lithospheric rheology and earthquake hazard.

Ward, Steven N.↗