Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pattern formation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Evolution of Dendritic Extended 3D Patterns during Directional Solidification: Microgravity Experiments in DECLIC-DSI onboard ISS and Phase-field Modeling

To characterize the dynamical formation of three-dimensional (3D) arrays of dendrites under diffusive growth conditions, in situ monitoring of a series of experiments on a transparent succinonitrile – 0.46 wt% camphor model alloy was carried out under low gravity in the DECLIC Directional Solidification Insert onboard the International Space Station. These experiments offer continuous interface observation and enable the construction of space-time evolution maps of dendrite location and primary spacing during directional solidification. We present the evolution of dendritic extended 3D patterns for a large range of parameters displaying different levels of side branching in both experiments and phase-field simulations. The combined and separate effects of macroscopic interface curvature and crystal mis-orientation are evidenced and detailed. In addition, the aligned dendritic array caused by the invasion of dendrites formed at the edge of the crucible border is investigated.

Kaihua Ji↗
NASA NTRS1990

Model of Jovian F region ionosphere (Jovian ionosphere model in offset dipole approximation)

The geomagnetic control of the Earth's atmosphere is well understood. In the F-region and the topside ionosphere, non-electrical forces transport plasma along the magnetic field lines only. In consequence, the worldwide distribution of ionization is strongly dependent on the dip angle. For example, the equatorial anomaly is roughly symmetrical about the dipole equator rather than the geographic. The same appears to be the case in the Jovian ionosphere (Mahajan, 1981). The influence of the magnetic field of Jupiter on its ionization pattern is one of several outstanding topics which need to be studied. Tan (1986) investigated the formation of the equatorial anomaly in the Jovian ionosphere under a centered dipole model. Tan (1988) further studied the effect of the tilt of the Jovian dipole. The results were in broad agreement with those of a diffusive equilibrium model (Tan and Wu, 1981). An off-centered dipole model is constructed and its effects on the ionization pattern are investigated.

Tan, A.↗
NASA NTRS2016

Magnesium and Titanium Isotopic Compositions of an Unusual Hibonite-Perovskite Refractory Inclusion from Allende: It Is Fun

Introduction: Hibonite-rich refractory inclusions are among the first solids that formed in the solar nebula, and thus provide constraints on the earliest environment in the Solar System. An unusual hibonite-perovskite inclusion from Allende, SHAL, consists of a large (approximately 500 by 200 microns) single hibonite crystal and coexisting blocky perovskite (approximately 200 microns in size). The hibonite is characterized by chemical and oxygen isotopic compositions similar to those in the FUN (Fractionated and Unknown Nuclear anomalies) inclusion HAL. However, the rare earth element (REE) patterns measured at different spots of SHAL hibonite are highly variable, ranging from Group II-like (light REEs enriched relative to heavy REEs) to Group III-like (relatively flat with slight Eu depletions), but overall contrast largely with that of HAL, especially in the Ce and Yb abundances. This implies that SHAL hibonite formed and underwent distillation processes under more reducing conditions. Interestingly, the accompanying perovskite has uniform, unfractionated oxygen isotopic compositions (averaging delta (sup 17) O equals delta (sup 18) O equals −7 per mille) and REE abundances that are completely different from those of SHAL hibonite. This has been interpreted that perovskite and hibonite may not be co-genetic. Here we performed Al-Mg and Ti isotopic measurements of SHAL hibonite and perovskite to determine if the FUN characteristics are observed in these two isotope systems, and to further constrain the origin and evolution of SHAL. Results: Isotopic measurements of Al-Mg and Ti in SHAL were performed on the UCLA CAMECA ims-1290 ion microprobe by following the analytical protocols described in [1]. The Al-Mg and Ti data obtained in both terrestrial standards and SHAL hibonite and perovskite are shown below. Both SHAL hibonite and perovskite, despite very high (sup 27) Al to (sup 24) Mg ratios, are devoid of (sup 26) Mg excesses that can be attributed to the decay of (sup 26) Al. Delta (sup 25) Mg (mass-dependent fractionation) in hibonite is approximately −5 per mille per atomic mass unit relative to Madagascar hibonite, but is not well constrained for perovskite due to very large uncertainties owing to extremely low Mg contents. Similar to Mg isotopes, SHAL hibonite and perovskite show essentially the same Ti isotopic compositions, with anomalies in (sup 50) Ti of approximately 14 per mille, but the former shows greater Ti isotope fractionation than the latter (2.5 per mille per atomic mass unit versus 0 per mille). Discussion and Conclusions: The Al-Mg and Ti isotopic compositions of SHAL hibonite are consistent with those of HAL, suggesting that SHAL hibonite is a FUN inclusion and likely formed prior to homogenization of (sup 26) Al and Ti isotope variations in the solar nebula. However, the formation mechanisms for SHAL and HAL differ, given the differences in the REE patterns and degrees of oxygen mass-dependent fractionation. The Group-II to Group-III like REE patterns, the Yb depletions, and negative delta (sup 25) Mg observed in SHAL hibonite are all consistent with condensation of the hibonite precursor in a reducing environment.. The lack of large Ce depletions in SHAL hibonite implies that distillation processes that fractionated hibonite's oxygen isotopes must have taken place under a reducing condition, but the extent to which SHAL hibonite was distilled appears to be less than HAL because of the smaller degree of oxygen mass-dependent fractionation. The perovskite shares essentially the same Ti and Mg isotopic compositions as hibonite and probably formed in the same reservoir.. The ultrarefractory REE pattern seen in perovskite likely resulted from gas-solid fractionation which depleted HREEs in this reservoir. This process also explains why SHAL hibonite is generally depleted in HREEs relative to LREEs.

Liu, M.-C.↗
NASA NTRS1984

Spiral structure and star formation. I - Formation mechanisms and mean free paths

The wide variety of optical appearances observed in spiral galaxies has encouraged the growth of two theoretical approaches to explain the spiral patterns exhibited by such young objects as OB associations, giant H II regions, and dark dust lanes. These approaches are related to the density wave theory of spiral structure and 'stochastic, self-propagating star formation'. Levinson and Roberts (1981) tried to reconcile these two theoretical approaches, and considered a disk filled with discrete gas clouds. The present investigation is concerned with refinements and extensions of the model of Levinson and Roberts. Attention is given to gravitational forces and dynamical propagation, cloud-cloud collisions, supernova interactions, computational models, a theory concerning the interactions of the gas cloud and stellar association systems, the time evolution of the gas cloud-stellar association systems, and aspects of collisionally triggered star formation.

Roberts, W. W., Jr.↗
NASA NTRS1992

The kinematics of buoyancy induced mixing

A model problem to study mixing driven by buoyancy flow fields due to a time dependent body force which consists of a steady and an oscillatory component is considered. Flow fields generated by a time dependent body force, which consists of a steady and an oscillatory component from vibrations or g-jitter, mix two fluids inside a cavity by stretching and folding the interface into various morphological patterns. These patterns show two basic structures depending on the dominant components of the body force. These structures are whirls and tendrils, corresponding to the dominance of either the steady or oscillatory component, respectively. A combination of these structures also occurs in the interaction region. In this region the effect of the steady component opposes the oscillatory component and the result is to smooth the interface, and prevent breakup of the interface. For the parametric range considered, two basic flow regimes occur: convective and chaotic. In the convective regime, the morphological patterns are topological. In the chaotic regime, mixing occurs by a repetitive sequence of bubble formation, necking, and breakup which spreads the concentration field throughout the cavity. The length stretch of the interface increases exponentially with time. The dynamical system characteristics show that in the convective regime, at a point in space, the flow field is oscillatory with elliptical phase space trajectories, and its power spectrum indicates that the flow field responds to the corresponding input frequency. Whereas, in the chaotic regime, the flow field is aperiodic, the phase space trajectories show irregular patterns, and the power spectrum shows a broadband distribution.

Duval, Walter M. B.↗
NASA NTRS1985

Global and regional ridge patterns on Mars

A systematic study of Martian wrinkle ridges was performed to synthesize a theory of the planetary interior forces which produced such surface features. The survey was carried out using Mariner-9 and Viking orbiter imagery. Attention was given to the global distributions of ridge types in terms of geologic and tectonic surrounds, and to the orientation of ridges relative to impact basins. High/low relief ridges, ridge wings and rectilinear ridges were examined. Ridge orientation and distribution were found to be controlled by the forces of formation and modification of impact basins. Several other conclusions were reached regarding basin-concentric ridge patterns, regional stress patterns, regions of the most numerous ridges, and the location of a major compressive zone.

Chicarro, A. F.↗
NASA NTRS1972

Chemical constraints on the origin of chondrules in ordinary chondrites.

Chemical variations found among 61 chondrules from the Chainpur (LL-3) chondrite are compared with those predicted for various mechanisms of chondrule formation. Neither crystal-liquid nor liquid-vapor fractionation accounts for the pattern of variation in Chainpur, which appears to reflect fragmentation of a crystalline precursor rock whose crystal dimensions were about 1/10 of the median chondrule diameter.

Dodd, R. T.↗
NASA NTRS1989

Properties of grains derived from IRAS observations of dust

The authors used the results of Infrared Astronomy Satellite (IRAS) observations of diffuse medium dust to develop a theoretical model of the infrared properties of grains. Recent models based entirely on traditional observations of extinction and polarization include only particles whose equilibrium temperatures do not exceed 20 K in the diffuse interstellar medium. These classical grains, for which the authors have adopted the multipopulation model developed by Hong and Greenberg (1980), can explain only the emission in the IRAS 100 micron band. The measurements at shorter wavelengths (12, 25 and 60 microns) require two new particle populations. Vibrational fluorescence from aromatic molecules provides the most likely explanation for the emission observed at 12 microns, with polycyclic aeromatic hydrocarbons (PAHs) containing about 10 percent of cosmic carbon. A simplified model of the emission process shows that PAH molecules can also explain most of the emission measured by IRAS at 25 microns. The authors identified the warm particles responsible for the excess 60 microns emission with small (a approx. equals 0.01 microns) iron grains. A compilation of the available data on the optical properties of iron indicates that the diffuse medium temperature of small iron particles should be close to 50 K and implies that a large, possibly dominant, fraction of cosmic iron must be locked up in metallic particles in order to match the observed 60 microns intensities. The model matches the infrared fluxes typically observed by IRAS in the diffuse medium and can also reproduce the infrared surface brightness distribution in individual clouds. In particular, the combination of iron and classical cool grains can explain the surprising observations of the 60/100 microns flux ratio in clouds, which is either constant or increases slightly towards higher opacities. The presence of metallic grains has significant implications for the physics of the interstellar medium, including catalytic H2 formation, for which iron grains could be the main site; differences in depletion patterns between iron and other refractory elements (Mg, Si); and superparamagnetic behavior of large grains with embedded iron clusters giving rise to the observed high degree of alignment by the galactic magnetic field.

Wesselius, P. R.↗
NASA NTRS1997

Evolution of the Global Aurora During Positive IMP Bz and Varying IMP By Conditions

The DE 1 imaging instrumentation provides a full view of the entire auroral oval every 12 min for several hours during each orbit. We examined five examples of global evolution of the aurora that occurred during the northern hemisphere winter of 1981-1982 when the z component of the interplanetary magnetic field was positive and the y component was changing sign. Evolution of an expanded auroral emission region into a theta aurora appears to require a change in the sign of By during northward interplanetary magnetic field (IMF). Theta aurora are formed both from expanded duskside emission regions (By changes from positive to negative) and dawnside emission regions (By changes from negative to positive), however the dawnside-originating and duskside-originating evolutions are not mirror images. The persistence of a theta aurora after its formation suggests that there may be no clear relationship between the theta aurora pattern and the instantaneous configuration of the IMF.

Cumnock, J. A.↗
NASA NTRS1997

Evolution of the Global Aurora During Positive IMF B(sub z) and Varying IMF B(sub y) Conditions

The DE 1 imaging instrumentation provides a full view of the entire auroral oval every 12 min for several hours during each orbit. We examined five examples of global evolution of the aurora that occurred during the northern hemisphere winter of 1981-1982 when the z component of the interplanetary magnetic field (IMF) was positive and the y component was changing sign. Evolution of an expanded auroral emission region into a theta aurora appears to require a change in the sign of B(sub y) during northward Interplanetary Magnetic Field. Theta aurora are formed both from expanded duskside emission regions (B(sub y) changes from positive to negative) and dawnside emission regions (B(sub y) changes from negative to positive), however the dawnside-originating and duskside-originating evolutions are not mirror images. The persistence of a theta aurora after its formation suggests that there may be no clear relationship between the theta aurora pattern and the instantaneous configuration of the IMF.

Cumnock, J. A.↗
NASA NTRS2010

Carbon Isotopes of Alkanes in Hydrothermal Abiotic Organic Synthesis Processes at High Temperatures and Pressures: An Experimental Study

Observation of methane in the Martian atmosphere has been reported by different detection techniques [1-4]. With more evidence showing extensive water-rock interaction in Martian history [5-7], abiotic formation by Fischer-Tropsch Type (FTT) synthesis during serpentization reactions may be one possible process responsible for methane generation on Mars [8, 9]. While the experimental studies performed to date leave little doubt that chemical reactions exist for the abiotic synthesis of organic compounds by mineral surface-catalyzed reactions [10-12], little is known about the reaction pathways by which CO2 and/or CO are reduced under hydrothermal conditions. Carbon and hydrogen isotope measurements of alkanes have been used as an effective tool to constrain the origin and reaction pathways of hydrocarbon formation. Alkanes generated by thermal breakdown of high molecular weight organic compounds have carbon and hydrogen isotopic signatures completely distinct from those formed abiotically [13-15]. Recent experimental studies, however, showed that different abiogenic hydrocarbon formation processes (e.g., polymerization vs. depolymerization) may have different carbon and hydrogen isotopic patterns [16]. Results from previous experiments studying decomposition of higher molecular weight organic compounds (lignite) also suggested that pressure could be a crucial factor affecting fractionation of carbon isotopes [17]. Under high pressure conditions, no experimental data are available describing fractionation of carbon isotope during mineral catalyzed FTT synthesis. Thus, hydrothermal experiments present an excellent opportunity to provide the requisite carbon isotope data. Such data can also be used to identify reaction pathways of abiotic organic synthesis under experimental conditions.

Fu, Qi↗
NASA NTRS2012

Quantum-Well Infrared Photodetector (QWIP) Focal Plane Assembly

A paper describes the Thermal Infrared Sensor (TIRS), a QWIP-based instrument intended to supplement the Operational Land Imager (OLI) for the Landsat Data Continuity Mission (LDCM). The TIRS instrument is a far-infrared imager operating in the pushbroom mode with two IR channels: 10.8 and 12 microns. The focal plane will contain three 640x512 QWIP arrays mounted on a silicon substrate. The silicon substrate is a custom-fabricated carrier board with a single layer of aluminum interconnects. The general fabrication process starts with a 4-in. (approx.10-cm) diameter silicon wafer. The wafer is oxidized, a single substrate contact is etched, and aluminum is deposited, patterned, and alloyed. This technology development is aimed at incorporating three large-format infrared detecting arrays based on GaAs QWIP technology onto a common focal plane with precision alignment of all three arrays. This focal plane must survive the rigors of flight qualification and operate at a temperature of 43 K (-230 C) for five years while orbiting the Earth. The challenges presented include ensuring thermal compatibility among all the components, designing and building a compact, somewhat modular system and ensuring alignment to very tight levels. The multi-array focal plane integrated onto a single silicon substrate is a new application of both QWIP array development and silicon wafer scale integration. The Invar-based assembly has been tested to ensure thermal reliability.

Jhabvala, Murzy↗
NASA NTRS1993

The microstructure and formation of duplex and black plessite in iron meteorites

Two of the most common plessite structures, duplex and black plessite, in the taenite region of the Windmanstatten pattern of two iron meteorites (Grant and Carlton) are characterized using high-resolution electron microscopy and microanalysis techniques. Two types of gamma precipitates, found in the duplex plessite and black plessite regions, respectively, are identified, and their morphologies are described. The formation of the plessite structure is discussed using the information obtained in this study and results of a parallel investigation of decomposed martensitic Fe-Ni laboratory alloys.

Zhang, J.↗
NASA NTRS1981

Collapses of stellar protogalaxies from aspheric initial conditions

Numerical experimens are presented which were intended to verify the independence of bar formation in rotating galaxy models from special initial conditions. Three-dimensional n-body programs were run starting from aspherical initial conditions characterized by particle rotational and peculiar velocities and offsets from sphericity for a set of 100,000 particles. All the initial configurations examined are observed to collapse to a thin form, overshoot, collapse again and again overshoot, with diameters and central densities similar to those observed under spheric initial conditions. Every aspheric collapse is also found to result in bar formation within two rotation periods, which is even sooner than in initially spherical conditions. In the intermediate stages of collapse, transient sheet patterns are found to be destroyed at asymmetries of 2-3%, while transient rings survived asymmetries of 6-7% but not 15-18%. It is noted that the results may be applicable to galaxy formation in the early universe, and possible mechanisms for the arresting of protogalactic collapse are indicated.

Miller, R. H.↗
NASA NTRS1993

A time-dependent model of polar cap arcs

In the present 2D time-dependent model of polar cap arcs, the electrodynamics of the polar cap arcs are treated self-consistently in the frame of the coupled magnetosphere-ionosphere system. The focus of this work is a description of the features of the spatial structure and temporal evolution of the polar cap arcs. Results indicate that the time constant for the formation of the polar cap arcs is around 10 min; an initial single-arc precipitation pattern associated with a polar cap arc tends to split into multiple precipitation regions, yielding a multiple polar cap arc structure. Strong downward field-aligned currents can develop near the intensive upward field-aligned currents and form a pair structure of the field-aligned current in the polar cap arcs. The model predicts plasma flow crossing the polar cap arcs, but its amplitude is small and its characteristic time scale is much larger than the time constant for the formation of the polar cap arcs. While polar cap arcs are developing, the associated current system tends to become further localized.

Zhu, L.↗
NASA NTRS1992

STS-48 case study, 17-18 September 1991

Weather conditions are documented prior to and during the STS-48 attempted landing at the Shuttle Landing Facility at KSC on 18 Sep. 1991. Trends in meteorological data during 17 and 18 Sep. are examined along with their relationship to the overall weather pattern observed over the KSC region. The primary weather problems during the landing were the formation of showers within 10 nautical miles of the SLF and any ceiling less than 10,000 ft. The controlling factor of the weather was a high pressure ridge that was gradually weakening and moving off the northeast. As this occurred, the low level flow was switching from a easterly to a southeasterly direction. This change in wind direction was reflected by shower movement on the McGill radar and by trends in rawinsondes launched from the Cape. These rawinsondes also indicated that the boundary layers was becoming slightly more unstable several hours prior to the attempted landing which may have aided in the development of clouds and small isolated showers. Also, analyses of Doppler wind profiler and rawinsondes indicated a possible midlevel disturbance in the easterly flow pattern near 700 mb. This weak disturbance may have made the atmosphere a little more unstable early on 18 Sep. Finally, embedded within the southeasterly flow were several bands of low clouds. These clouds were rather difficult to see in unenhanced IR satellite imagery available to forecasters in real time. However, post analyses using several different enhancement curves, adapted from NESDIS, clearly reveals the presence of these clouds.

Atchison, Michael K.↗
NASA NTRS1975

Computer storage and retrieval of coronary trees

Coronary cineangiography is a routine procedure for evaluation of the coronary circulation. From the biplane cineangiograms a visual representation of coronary perfusion was obtained. A collection of simple ideas and procedures to aid in the collection is described. The uses to which the tree data will be put include the evaluation of myocardial function and the formation of a library sufficiently large to enable some taxonomic classification of coronary artery patterns to be made.

Starmer, C. F.↗