Search NASA⌕ Search

SEARCH · Search NASA

Results for “Petrology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Minor elements in lunar olivine as a petrologic indicator

Accurate electron microprobe analyses (approximately 50 ppm) were made for Al, Ca, Ti, Cr, Mn, and Ni in Mg-rich olivines which may derive from early lunar crust or deeper environments. Low-Ca contents consistently occur only in olivines from dunitic and troctolitic breccia: spinel troctolite and other rock types have high-Ca olivines suggesting derivation by near-surface processes. Rock 15445 has olivine with distinctly low CaO (approximately 0.01 wt.%). Chromium ranges to higher values (max.0.2 oxide wt.%) than for terrestrial harzburgites and lherzolites but is similar to the range in terrestrial komatiites. Divalent chromium may be indicated over trivalent Cr because olivines lack sufficient other elements for charge balance of the latter. NiO values in lunar specimens range from 0.00 to 0.07 wt.% and a weak anticorrelation with Cr2O3 suggests an oxidation state effect. Al2O3 values are mostly below 0.04-wt.% and show no obvious correlation with fragment type. TiO2 values lie below 0.13-wt.% and seem to correlate best with crystallization rate and plagioclase content of the host rock. High values of Al2O3 and TiO2 reported by other workers have not been confirmed, and are probably wrong.

Steele, I. M.↗
NASA NTRS1975

Petrography and petrology of basaltic achondrite polymict breccias /Howardites/

The reported investigation is based on the results from petrographic observations, electron microprobe analyses of constituent phases, and defocused beam analyses of clasts and glasses. Howardites consist of mostly angular-to-rounded mineral, rock, and breccia clasts compacted in variable grain-sized matrices of finely comminuted materials. Attention is given to ophitic and subophitic rocks, granular basalts and microgabbros, mafic rocks, Al-rich rocks, breccia clasts, impact melt rocks, glasses, meteorite clasts, bulk composition, particle size distribution, howardite component composition, questions of breccia formation, and parent body implications. It is found that the four main rock types found in howardites do have certain analogies to lunar rocks. It is tempting to speculate that both the moon and the basaltic achondrite parent body formed similar rock suites in their evolutionary processes.

Bunch, T. E.↗
NASA NTRS1975

The system anorthite-forsterite-fayalite-silica to 2 kbar with lunar petrologic applications

Near-liquidus phase relations in the magnesium-rich portion of the system anorthite-forsterite-fayalite-silica have been determined from synthesis experiments at 1 atm and 2 kbar at oxygen fugacities near the iron-wuestite buffer. The major-element chemistries of KREEP basalts are similar to peritectic liquids, L/ol,px,an/, produced experimentally. The reaction L/ol,px,an/ is well-located at low pressures. It intersects the join anorthite-enstatite-ferrosilite at Fe/(Fe+Mg) equals 0.45 (atomic ratio), and is peritectic only for Fe/(Fe+Mg) not greater than 0.45. Although positions of the equilibria, L/an,ol/ and L/ol,px/, differ significantly at 1 atm from their positions at 2 kbar, the position of the piercing point, L/ol,px,an/, on the anorthite-enstatite-ferrosilite join is not sensitive to pressure. The composition of liquids produced by partial melting of troctolites and pyroxenites in the lunar crustal environment will be affected by pressure, whereas liquids derived from gabbroic assemblages will not.

Merrill, R. B.↗
NASA NTRS1978

Petrographic and petrological studies of lunar rocks

Thin sections and polished electron probe mounts of Apollo 15 glasscoated breccias 15255, 15286, 15466, and 15505 were examined optically and analyzed by sem/microprobe. Sections from breccias 15465 and 15466 were examined in detail, and chemical and mineralogical analyses of several larger lithic clasts, green glass, and partly crystallized green glass spheres are presented. Area analyses of 33 clasts from the above breccias were also done using the SEM/EDS system. Mineralogical and bulk chemical analyses of clasts from the Apollo 15 glass-coated breccias reveal a diverse set of potential rock types, including plutonic and extrusive igneous rocks and impact melts. Examination of the chemistry of the clasts suggests that many of these clasts, like those found in 61175, are impact melts. Their variability suggests formation by several small local impacts rather than by a large basin-forming event.

Winzer, S. R.↗
NASA NTRS1978

Petrographic and petrological studies of lunar rocks

Clasts, rind glass, matrix glass, and matrix minerals from five Apollo 15 glass-coated breccias (15255, 15286, 15465, 15466, and 15505) were studied optically and with the SEM/microprobe. Rind glass compositions differ from sample to sample, but are identical, or nearly so, to the local soil, suggesting their origin by fusion of that soil. Most breccia samples contain green or colorless glass spheres identical to the Apollo 15 green glasses. These glasses, along with other glass shards and fragments, indicate a large soil component is present in the breccias. Clast populations include basalts and gabbros containing phases highly enriched in iron, indicative of extreme differentiation or fractional crystallization. Impact melts, anorthosites, and minor amounts of ANT suite material are also present among the clasts. Tektite glasses, impact melts, and breccias from the Zhamanshin structure, USSR, were also studied. Basic tektite glasses were found to be identical in composition to impact melts from the structure, but no satisfactory parent material has been identified in the limited suite of samples available.

Winzer, S. R.↗
NASA NTRS1978

Thermal metamorphism of primitive meteorites. VII - Mineralogy-petrology of heated Murchison /C2/ and alteration of C30 and other chondrites

Alterations caused by week-long heating of Murchison in a low-pressure environment at 400-1400 C are of two types: thermodynamically favored kinetically controlled or thermodynamically controlled rapid processes. Kinetically controlled changes pertinent to chondritic evolution and which vary progressively with temperature in heated Murchison include: chondrule blurring; matrix coarsening; increasing mean Fa and Fs contents of ferromagnesian silicates; equilibration of olivine; increasing Mg/Si, Ca/Si, Al/Si, and Cr/Si and decreasing Fe/Si, Ni/Si, and S/Si in matrix; Cr loss from kamacite; and homogenization and Ni-zoning in taenite at high temperatures. Low-temperature thermodynamically controlled changes include: transformation of high-Ni troilite to low-Ni and formation of Ni- and Co-rich metal from pentlandite. High-temperature changes include formation of Cr-rich magnetite and formation of a Ni-rich sulfide similar to that found in highly altered chondrites. Trends resulting from processes of both kinds in Murchison are consistent with characteristics of a postulated C30 metamorphic suite, while those changes caused by reactions of the second kind are similar to those in heavily shock-heated ordinary chondrites and the heavily metamorphosed C5-6 chondrite, Mulga West. Either the simulations support the metamorphic origin of the C30 suite and other thermally induced changes or the natural alterations support the utility of laboratory simulations in studying meteoritic evolution.

Matza, S. D.↗
NASA NTRS1978

Experimental petrology of very low Ti /VLT/ basalts

Synthetic analogs of Luna 24 ferrobasalt and an Apollo 15 green glass were subjected to iron capsule experiments to test hypotheses concerning the generation of Luna 24 ferrobasalt. Results of the experiments indicated that the Luna 24 ferrobasalt may be generated by near-surface fractionation of a Luna 24 green glass parent. Evidence for the parent magma which differentiated at or near the Mare Crisium site to yield the Luna 24 ferrobasalt may be found in the Luna 24 green glass and lithic fragments of vitrophyres.

Grove, T. L.↗
NASA NTRS1978

Petrology, chemistry, and chronology of 14078 - Chemical constraints on the origin of KREEP

Petrographic, chemical and isotopic similarities between 14078 and other Apollo-14 KREEP basalts suggest that these samples were derived from the same parent liquid and possibly from the same cooling unit. The liquid was probably generated via meteorite impact. Subtle differences are noted in the shapes of REE patterns of KREEP-rich samples from different landing sites; the origin of these differences is not well understood. Calculated Ti/Sm values in liquids parental to primitive cumulate samples are similar to values proposed for the whole moon.

Mckay, G. A.↗
NASA NTRS1978

Petrology of Apollo 16 breccia 66075

66075 is a coherent, light matrix breccia with a seriate fabric and is composed of large lithic, mineral and glass clasts in a matrix of lithic, mineral and glass fragments. The lithic clasts are ANT-suite rocks and a texturally diverse suite of impact-generated melt-rocks. The mineral fragments in the matrix and the mineral clasts are mostly plagioclase with subordinate amounts of pyroxene and olivine. The mineral compositions and/or bulk compositions of most of the components of the breccia, as well as the U-Pb isotopic systematics, are compatible with an origin involving impact-melting and fragmentation of an ANT-suite protolith. The major element composition of the breccia matrix can be successfully modeled in terms of mixing the observed clast types. Previously suggested components such as 'dunite' and 'KREEP' are absent or occur in very low abundance.

Quick, J. E.↗
NASA NTRS1978

The Apollo 16 drive tube 60009/60010. I - Modal petrology

Detailed petrographic examination of 22 thin sections from the impregnated portion of the Apollo 16 double drive tube supports the findings of previous workers. A well-gardened unit exists at the top of 60010, indicated petrographically by an increase in agglutinates near the lunar surface. There is a coarse-grained anorthositic layer near the bottom of 60009. Few, if any, of the modal variations are stratigraphically correlatable with the deep drill core 60002-7, which was recovered 50 m southwest of drive tube 60009/60010.

Simon, S. B.↗
NASA NTRS1978

The Apollo 16 drive tube 60009/60010. II - Petrology and major element partitioning among the regolith components

The paper summarizes petrographic and electron microprobe data from 22 polished thin sections that represent the total length of double drive tube 60009/60010 and discusses a new application of the method of modal recombination to estimate bulk chemistry. The modal recombination approach can be used to reliably calculate the chemistry of the greater than 0.02-mm size fraction and, more significantly, to derive the total major element partitioning among the regolith components.

Vaniman, D. T.↗
NASA NTRS1978

Core 74001/2 - Grain size and petrology as a key to the rate of in-situ reworking and lateral transport on the lunar surface

A suite of samples from the double drive tube 74001/2 has been studied. Material from this core mainly consists of orange and black droplets interpreted to be volcanic pyroclastic ejecta. Grain size analysis indicates that this material is very homogeneous in its grain size properties. It is also the finest and best sorted suite of soil samples in the lunar collection having a mean grain size of 40 microns and a mean standard deviation of 1.75 phi. The upper 5.5 cm of this core has apparently undergone in situ reworking by meteorites over a period of about 10 million years. This reworked zone contains 'exotic' grains including basalt, mineral fragments, vitric breccias, and agglutinates. One type of agglutinate is unique and has been made primarily from orange and black glass droplets melted and welded together by micrometeorite impacts. Other agglutinates are made mainly from basaltic fragments and minerals. The amount of 'exotic' material added to the core combined with an estimate of the location of the source areas for the 'exotic' material allows us to estimate that a maximum of about 0.36 gm per sq cm of regolith surface is added from a radius of about 1 meter in 10 million years. Furthermore, no more than about 0.01 gm per sq cm of regolith surface is added from a radius of about 100 meters in 10 million years.

Mckay, D. S.↗
NASA NTRS1978

Petrology of a sequence of pyroclastic rocks from the valley of Taurus-Littrow /Apollo 17 landing site/

Thirteen samples of core 74001/2, collected at Shorty Crater by Apollo 17, have been analyzed. The samples, taken from the core section below 5.5 cm and representing most of the major stratigraphic units described by Nagle (1978), consist entirely of whole and fragmented orange and black droplets. The grain shape, degree of crystallinity, breakage, vesicularity, predominant olivine shapes, and phenocryst content of about 18,000 droplets were investigated. The crystalline droplets were found to contain olivine and ilmenite as major phases and pyroxene, Cr-spinel and metallic Fe as minor phases. The grain shape, degree of crystallization, olivine shape and olivine composition suggest that a wide range of cooling rates is represented. The upper part of the core section (above 5.5 cm) has undergone in situ reworking by micrometeorites. The 74001/2 samples are believed to be from an ultramafic pyroclastic deposit brought to the surface by the Shorty Crater impact and originally formed by a lava fountain active in the Taurus-Littrow valley 3.5 b.y. ago. The sequence represented in the sample was most likely deposited over a very short period of time.

Heiken, G.↗
NASA NTRS1978

Chemistry and petrology of size fractions of Apollo 17 deep drill core 70009-70006

Instrumental neutron activation analysis was used to examine 34 major, minor and trace elements in 48 bulk soils and size fractions (90-1000 microns, 20-90 microns and less than 20 microns) of the Apollo 17 deep drill core sections 70009-70006 (upper 130 cm). Modal data were also obtained for the less than 20 micron size fraction. Preliminary results indicate that (1) the chemistry of the greater than 90 micron and 20-90 micron coarse fractions is identical but quite different from the less than 20 micron fine fraction; (2) the upper 50 cm of the drill core is highly enriched in mare material; (3) the dominant source of highland material is KREEPy instead of anorthositic; and (4) indigenous volatiles such as Zn are quite high in all size fractions.

Laul, J. C.↗