SEARCH · Search NASA

Results for “Procedure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1988

An error estimation procedure for plate bending elements

Procedures for identifying and eliminating errors inherent in individual finite elements and those due to the discretization of the continuum are presented. The elemental errors are identified through the use of an element formulation procedure based on physically interpretable strain gradient interpolation functions. The use of physically interpretable notation allows these errors to be eliminated using rational arguments. The discretization errors are identified by comparing the finite-element solution with a smoothed superconvergent solution. The errors thus identified are used to guide an adaptive mesh refinement procedure which produces improved results.

Dow, John O.↗

NASA NTRS1986

Procedures and tools for building large Ada systems

Some of the problems unique to building a very large Ada system are addressed. This is done through examples from experience. In the winter of 1985 and 1986, Intermetrics bootstrapped the Ada compiler, which was being built over the last few years. This system consists of about one million lines of full Ada. Over the last few years a number of procedures and tools were adopted for managing the life cycle of each of the many parts of an Ada system. Many of these procedures are well known to most system builders: release management, quality assurance testing; and source file revision control. Others are unique to working in an Ada language environment; i.e., recompilation management, Ada program library management, and managing multiple implementations. First a look is taken at how a large Ada system is broken down into pieces. The Ada definition leaves unspecified a number of issues that the system builder must address: versions, subsystems, multiple implementations, and synchronization of branched development paths. Having introduced how the Ada systems are decomposed, a look is taken, via a series of examples, at how the life cylces of those parts is managed. The procedures and tools used to manage the evolution of the system are examined. It is hoped that other Ada system builders can build upon the experience of the last few years.

Hyde, Ben↗

NASA NTRS1989

A compendium of controlled diffusion blades generated by an automated inverse design procedure

A set of sample cases was produced to test an automated design procedure developed at the NASA Lewis Research Center for the design of controlled diffusion blades. The range of application of the automated design procedure is documented. The results presented include characteristic compressor and turbine blade sections produced with the automated design code as well as various other airfoils produced with the base design method prior to the incorporation of the automated procedure.

Sanz, Jose M.↗

NASA NTRS1989

Procedures for shape optimization of gas turbine disks

Two procedures, the feasible direction method and sequential linear programming, for shape optimization of gas turbine disks are presented. The objective of these procedures is to obtain optimal designs of turbine disks with geometric and stress constraints. The coordinates of the selected points on the disk contours are used as the design variables. Structural weight, stress and their derivatives with respect to the design variables are calculated by an efficient finite element method for design senitivity analysis. Numerical examples of the optimal designs of a disk subjected to thermo-mechanical loadings are presented to illustrate and compare the effectiveness of these two procedures.

Cheu, Tsu-Chien↗

NASA NTRS1989

Determination of the thermal stability of perfluoroalkylethers by tensimetry: Instrumentation and Procedure

A computerized tensimeter and experimental procedure for determination of the thermal decomposition temperature (T sub d) of perfluoro alkylethers were developed and tested. Both the apparatus and the procedure are described in detail. Results of testing with bis(2-ethylhexyl) phthalate and trimethylolpropane triheptanoate demonstrate that the reciprocal of the decomposition temperature is a linear function of the logarithm of the gas volume/heated liquid volume ratio. The T sub d obtained for each compound at a gas volume/heated liquid volume ration of one was similar to the value previously reported using an isoteniscope technique. Results of testing with a polymer of hexafluoropropylene oxide demonstrate that this instrument and procedure can be used to determine the T sub d of perfluoroalkylethers.

Helmick, Larry S.↗

NASA NTRS1989

An adaptive embedded mesh procedure for leading-edge vortex flows

A procedure for solving the conical Euler equations on an adaptively refined mesh is presented, along with a method for determining which cells to refine. The solution procedure is a central-difference cell-vertex scheme. The adaptation procedure is made up of a parameter on which the refinement decision is based, and a method for choosing a threshold value of the parameter. The refinement parameter is a measure of mesh-convergence, constructed by comparison of locally coarse- and fine-grid solutions. The threshold for the refinement parameter is based on the curvature of the curve relating the number of cells flagged for refinement to the value of the refinement threshold. Results for three test cases are presented. The test problem is that of a delta wing at angle of attack in a supersonic free-stream. The resulting vortices and shocks are captured efficiently by the adaptive code.

Powell, Kenneth G.↗

NASA NTRS1988

Finite element procedures for time-dependent convection-diffusion-reaction systems

New finite element procedures based on the streamline-upwind/Petrov-Galerkin formulations are developed for time-dependent convection-diffusion-reaction equations. These procedures minimize spurious oscillations for convection-dominated and reaction-dominated problems. The results obtained for representative numerical examples are accurate with minimal oscillations. As a special application problem, the single-well chemical tracer test (a procedure for measuring oil remaining in a depleted field) is simulated numerically. The results show the importance of temperature effects on the interpreted value of residual oil saturation from such tests.

Tezduyar, T. E.↗

NASA NTRS1989

Stability and implementation of partitioned CSI solution procedures

A partitioned procedure developed for the efficient solution of control-structure interaction (CSI) problems is presented with emphasis on its computational stability, implementation aspects, and accuracy characteristics. The partitioned CSI procedure proposed here can facilitate the use of large-scale structural analysis for control-structure interaction problems. It is anticipated that real-time CSI simulations will become routine if adequate advances are made in the construction of reduced-order observers and, for some time variant problems, if substantially faster parallel solution procedures for the Riccati equations become available.

Park, K. C.↗

NASA NTRS1989

A block-corrected subdomain solution procedure for recirculating flow calculations

This paper describes a robust and efficient subdomain solution procedure for two-dimensional recirculating flows. The solution domain is divided into a number of overlapping subdomains, and a direct fully coupled solution is obtained for each subdomain using a sparse matrix form of LU decomposition. An effective parabolic block correction procedure, which calculates global corrections to the tentative solution by a marching technique similar to that used for boundary layer flows, is used to accelerate the convergence of the basic procedure. The use of effective block correction is found to be essential for the success of the subdomain approach on strongly recirculating flows. In a number of laminar two-dimensional flows, the new block-corrected method performed extremely well, rivaling the best direct methods in execution time, while requiring substantially less computer storage. The new method proved to be from two to ten times faster than conventional iterative methods, while requiring only a moderate increase in storage.

Braaten, M. E.↗

NASA NTRS1989

A design procedure for the phase-controlled parallel-loaded resonant inverter

High-frequency-link power conversion and distribution based on a resonant inverter (RI) has been recently proposed. The design of several topologies is reviewed, and a simple approximate design procedure is developed for the phase-controlled parallel-loaded RI. This design procedure seeks to ensure the benefits of resonant conversion and is verified by data from a laboratory 2.5 kVA, 20-kHz converter. A simple phasor analysis is introduced as a useful approximation for design purposes. The load is considered to be a linear impedance (or an ac current sink). The design procedure is verified using a 2.5-kVA 20-kHz RI. Also obtained are predictable worst-case ratings for each component of the resonant tank circuit and the inverter switches. For a given load VA requirement, below-resonance operation is found to result in a significantly lower tank VA requirement. Under transient conditions such as load short-circuit, a reversal of the expected commutation sequence is possible.

King, Roger J.↗

NASA NTRS1990

Simplified design procedures for fiber composite structural components/joints

Simplified step-by-step design procedures are summarized, which are suitable for the preliminary design of composite structural components such as panels (laminates) and composite built-up structures (box beams). Similar procedures are also summarized for the preliminary design of composite bolted and adhesively bonded joints. The summary is presented in terms of sample design cases complemented with typical results. Guidelines are provided which can be used in the design selection process of composite structural components/joints. Also, procedures to account for cyclic loads, hygrothermal effects and lamination residual stresses are included.

Murthy, P. L. N.↗

NASA NTRS1989

Finite element analysis of high speed compressible flows using mesh refinement/movement procedures

An adaptive mesh refinement procedure for analyzing high-speed inviscid and viscous compressible flows is described. The adaptation procedure which uses both quadrilateral and triangular elements is implemented with an explicit finite element formulation. Elements in regions of strong and weak gradients are refined or coarsened based on inviscid and viscous indicators. Nodal locations are also adaptively moved to better resolve flow features. The effectiveness of the finite element procedure is demonstrated by modeling flows with complex shock structure and viscous-inviscid interactions. Numerical results are compared with experimental data.

Ramakrishnan, R.↗

NASA NTRS1990

A computational procedure for multibody systems including flexible beam dynamics

A computational procedure suitable for the solution of equations of motions for flexible multibody systems has been developed. A fully nonlinear continuum approach capable of accounting for both finite rotations and large deformations has been used to model a flexible beam component. The beam kinematics are referred directly to an inertial reference frame such that the degrees of freedom embody both the rigid and flexible deformation motions. As such, the beam inertia expression is identical to that of rigid body dynamics. The nonlinear coupling between gross body motion and elastic deformation is contained in the internal force expression. Numerical solution procedures for the integration of spatial kinematic systems can be directily applied to the generalized coordinates of both the rigid and flexible components. An accurate computation of the internal force term which is invariant to rigid motions is incorporated into the general solution procedure.

Downer, J. D.↗

NASA NTRS1990

Staggered solution procedures for multibody dynamics simulation

A computational procedure is presented for the direct integration of the multibody dynamical (MBD) equations with constraints. Numerical experiments conducted with this MBD procedure indicate that it yields robust solutions in cases where the step size furnishes more than 20 samples for the period of highest apparent response frequency in a given multibody system. The MBD solution procedure is implemented in two separate modules: the generalized coordinated solver, 'CINT', and the constraint Lagrange multiplier solver, 'LINT'.

Park, K. C.↗

NASA NTRS1990

Microbial ecology laboratory procedures manual NASA/MSFC

An essential part of the efficient operation of any microbiology laboratory involved in sample analysis is a standard procedures manual. The purpose of this manual is to provide concise and well defined instructions on routine technical procedures involving sample analysis and methods for monitoring and maintaining quality control within the laboratory. Of equal importance is the safe operation of the laboratory. This manual outlines detailed procedures to be followed in the microbial ecology laboratory to assure safety, analytical control, and validity of results.

Huff, Timothy L.↗

NASA NTRS1990

Determination of the thermal stability of fluids by tensimetry - Instrumentation and procedure

Helmick, Larry S.↗

NASA NTRS1991

The computational structural mechanics testbed procedures manual

The purpose of this manual is to document the standard high level command language procedures of the Computational Structural Mechanics (CSM) Testbed software system. A description of each procedure including its function, commands, data interface, and use is presented. This manual is designed to assist users in defining and using command procedures to perform structural analysis in the CSM Testbed User's Manual and the CSM Testbed Data Library Description.

Stewart, Caroline B.↗

NASA NTRS1992

User guide for WIACX: A transonic wind-tunnel wall interference assessment and correction procedure for the NTF

A three dimensional transonic Wind-tunnel Interference Assessment and Correction (WIAC) procedure developed specifically for use in the National Transonic Facility (NTF) at NASA Langley Research Center is discussed. This report is a user manual for the codes comprising the correction procedure. It also includes listings of sample procedures and input files for running a sample case and plotting the results.

Garriz, Javier A.↗