SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The objective of this research is to develop an efficient numerical algorithm with unstructured grids for the computation of three-dimensional chemical reacting flows that are known to occur in combustion components of propulsion systems. During the grant period (1996 to 1999), two companion codes have been developed and various numerical and physical models were implemented into the two codes.
Microalgae-driven nutrient recovery represents a promising technology for phosphorus removal from wastewater while simultaneously generating biomass that can be valorized to offset treatment costs. As full-scale processes come online, system parameters including biomass composition must be carefully monitored to optimize performance and prevent culture crashes. In this study, flow imaging microscopy (FIM) was leveraged to characterize microalgal community composition in near real-time at a full-scale municipal wastewater treatment plant (WWTP) in Wisconsin, USA, and population and morphotype dynamics were examined to identify relationships between water chemistry, biomass composition, and system performance. Two FIM technologies, FlowCam and ARTiMiS, were evaluated as monitoring tools. ARTiMiS provided a more accurate estimate of total system biomass, and estimates derived from particle area as a proxy for biovolume yielded better approximations than particle counts. Deep learning classification models trained on annotated image libraries demonstrated equivalent performance between FlowCam and ARTiMiS, and convolutional neural network (CNN) classifiers proved significantly more accurate when compared to feature table-based dense neural network (DNN) models. Across a two-year study period, Scenedesmus spp. appeared most important for phosphorus removal, and were negatively impacted by elevated temperatures and increase in nitrite/nitrate concentrations. Chlorella and Monoraphidium also played an important role in phosphorus removal. For both Scenedesmus and Chlorella, smaller morphological types were more often associated with better system performance, whereas larger morphotypes likely associated with stress response(s) correlated with poor phosphorus recovery rates. Furthermore, these results demonstrate the potential of FIM as a critical technology for high-resolution characterization of industrial microalgal processes.
Background oriented schlieren images have historically been generated by calculating the observed pixel displacement between an image pair using normalized cross-correlation methods. This work uses optical flow data reduction methods to solve the displacement fields. A well established method used in the computer vision community, optical flow is the apparent brightness motion in an image sequence. The regularization method of Horn and Schunck is used to create schlieren images using two data sets: a supersonic shockjet plume interaction at the NASA Ames Unitary Plan Wind Tunnel, and a transonic flight test of a T-38 using a naturally occurring background performed in conjunction with NASA Ames and Armstrong research centers. Results are presented and contrasted with those using normalized cross-correlation methods. The optical flow images are found to provided significantly more detail at a decreased computational time.
A general chemical kinetics code is described for complex, homogeneous ideal gas reactions in any chemical system. The main features of the GCKP84 code are flexibility, convenience, and speed of computation for many different reaction conditions. The code, which replaces the GCKP code published previously, solves numerically the differential equations for complex reaction in a batch system or one dimensional inviscid flow. It also solves numerically the nonlinear algebraic equations describing the well stirred reactor. A new state of the art numerical integration method is used for greatly increased speed in handling systems of stiff differential equations. The theory and the computer program, including details of input preparation and a guide to using the code are given.
A graphical language for processing data allows processing elements to be connected with virtual wires that represent data flows between processing modules. The processing of complex data, such as lidar data, requires many different algorithms to be applied. The purpose of this innovation is to automate the processing of complex data, such as LIDAR, without the need for complex scripting and programming languages. The system consists of a set of user-interface components that allow the user to drag and drop various algorithmic and processing components onto a process graph. By working graphically, the user can completely visualize the process flow and create complex diagrams. This innovation supports the nesting of graphs, such that a graph can be included in another graph as a single step for processing. In addition to the user interface components, the system includes a set of .NET classes that represent the graph internally. These classes provide the internal system representation of the graphical user interface. The system includes a graph execution component that reads the internal representation of the graph (as described above) and executes that graph. The execution of the graph follows the interpreted model of execution in that each node is traversed and executed from the original internal representation. In addition, there are components that allow external code elements, such as algorithms, to be easily integrated into the system, thus making the system infinitely expandable.
As a part of an effort for the development of an "Integrated Solution Process for Iced Airfoils" which combines a CFD (Computational Fluid Dynamics) code and an ice accretion code for accurate prediction of ice growth and performance degradation, a study on the effect of iced-geometry-smoothing was initiated. As a first step in this study, the degree of smoothing was defined by the number of control points for the given iced airfoil geometry. Then, reducing these number of control points in a systematical way provided various degrees of grid generation. This study will be continued by comparing CFD computed data such as pressure, lift, drag, flow separation, and wake flow patterns between the iced airfoils against any existing experimental data.
A computerized flow visualization technique capable of quantifying the flow field automatically has been developed. This technique uses afterglowing effect of optically activated phosphorescent particles to retrieve vectorial information on each trace. By using this information, in conjunction with computer image processing, the flow field of a free surface transient vortex was investigated.
Radiation emitted from the exhaust flow of a multi-megawatt, quasi-steady magnetoplasmadynamic accelerator has been examined photoelectrically for argon mass flows from 6 to 32 g/sec and arc currents up to 25 kA. Vacuum ultraviolet radiation, indicative of resonance transitions, has been detected photoelectrically at various axial locations downstream of the arc chamber, consistent with a relaxation length calculated using a collisional-radiative recombination model. Photoelectric measurements of particular transitions in the neutral and first ionic state of argon show that populations of excited electronic states of AII are in excess of that which would be expected on the basis of Saha-Boltzmann equilibrium at the local electron temperature and number density. Optical depth measurements indicate that for a current of 4 kA and argon mass flow of 12 g/sec, a population inversion exists between the upper and lower states of the 0.4880 micron argon ion transition.
Investigations of the interactions of heat, mass, and momentum transport in crystal growth from the melt are described. Studies of the mall-scale floating zone process and on a prototype of the vertical Bridgman growth system were emphasized. In both systems detailed numerical calculations are used to dissect the interplay between fluid convection and dopant segregation. These calculations are based on finite element techniques that make feasible the complete solution of solidification problems which include convection. Other numerical methods were developed for solving thermal models of crystal growth processes with melt/gas menisci and for simulating the microscale instabilities in solidification interfaces.
The transition process characteristics of flows over swept wings were computationally modelled. The crossflow instability and crossflow/T-S wave interaction are analyzed through the numerical solution of the full three dimensional Navier-Stokes equations including unsteadiness, curvature, and sweep. The leading-edge region of a swept wing is considered in a three-dimensional spatial simulation with random disturbances as the initial conditions.
Various plasma relaxation processes that are significant in laboratory plasma flows for aerospace physics studies are discussed on the basis of a survey of time decay studies of immobile plasmas. Some of the problems analyzed and discussed are: the relative importance of the various recombination mechanisms, catalytic deionization by electro- negative particles, delayed ionization produced by metastable action, and heating of the flow by deionization reactions.
Combustion processes in rocket propulsion systems are characterized by the existence of multiple, vastly differing time and length scales, as well as flow-speeds at wide variation of Mach numbers. The chemical kinetics processes in the highly active reaction zone are characterized by much smaller scales compared to fluid convective and diffusive time scales. An operator splitting procedure for transient finite rate chemistry problems has been developed using a pressure based method, which can be applied to all speed flows without difficulties. The splitting of chemical kinetics terms formed the fluid-mechanical terms of the species equation ameliorated the difficulties associated with the disparate time scales and stiffness in the set of equations which describes highly exothermic combustion. A combined efficient ordinary differential equations (ODE) solver was used to integrate the effective chemical source terms over the residence time at each grid cell. One and two dimensional reacting flow situations were carried out to demonstrate and verify the current procedure. Different chemical kinetics with different degrees of nonlinearity have also been incorporated to test the robustness and generality of the proposed method.
The application of color coding techniques used in processing remote sensing imagery to analyze and display fluid flow data is discussed. A minicomputer based color film recording and color CRT display system is described. High quality, high resolution images of two-dimensional data are produced on the film recorder. Three dimensional data, in large volume, are used to generate color motion pictures in which time is used to represent the third dimension. Several applications and examples are presented. System hardware and software is described.
The processes leading to laminar-turbulent transition in finite-channel-length Taylor-Couette flow are investigated analytically, solving the unsteady incompressible Navier-Stokes equations by spectral-collocation methods. A time-split algorithm, implementable in both axisymmetric and fully three-dimensional time-accurate versions, and an algorithm based on the staggered-mesh discretization of Bernardi and Maday (1986) are described in detail, and results obtained by applying the axisymmetric version of the first algorithm and a steady-state version of the second are presented graphically and compared with published experimental data. The feasibility of full three-dimensional simulations of the progression through chaotic states to turbulence under the constraints of Taylor-Couette flow is demonstrated.
Friction stir welding (FSW) is a solid phase welding process that unites thermal and mechanical aspects to produce a high quality joint. The process variables are rpm, translational weld speed, and downward plunge force. The strain-temperature history of a metal element at each point on the cross-section of the weld is determined by the individual flow path taken by the particular filament of metal flowing around the tool as influenced by the process variables. The resulting properties of the weld are determined by the strain-temperature history. Thus to control FSW properties, improved understanding of the processing parameters on the metal flow path is necessary.
A description is presented of an improved version of a comprehensive theory of aeroacoustics which, in its original form, had first been reported by Yates and Sandri (1976). The new theory departs in several basic aspects from the concepts provided by Lighthill (1952), Ribner (1964), and Lilley et al. (1974). A detailed derivation of the theory is given for the case of constant entropy flows, taking into account the production of sound by a 'primary' fluid flow, the processing of sound by a flow, and the effects of sound on a primary flow. An investigation is conducted regarding the processing and the production of sound by vortex flow. Questions related to the excitation of a fluid flow by sound are also considered.
Software used with signature data processing system for automatic extraction of spectral information from multispectral band scanners - Vol. 2
This report presents the results from HLW glass formulation work that was conducted at the Vitreous State Laboratory of The Catholic University of America during Part B1 of the RPP-WTP Project (formally known as TWRS-P) in support of the Privatization contractor, BNFL, Inc. Glass formulation development is required to provide data that are essential for design of the vitrification facility in the near term and for safe and reliable operation of that facility in the longer-term. These data also form the bases from which contractually and technically acceptable immobilized high-level waste (IHLW) products will be devised. Glass formulation therefore impacts many aspects of the vitrification facility design, overall process economics, and contractual compliance. As an integral part of the overall system design, development of glass formulations requires input from many sources including tank waste characterization, pretreatment process definition, flow sheet development, and processing schedules. Accordingly, the glass formulation effort must be responsive to new information as the facility design basis evolves.