Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quantum Dots”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Experimental realization of an extended Fermi-Hubbard model using a 2D lattice of dopant-based quantum dots

The Hubbard model is an essential tool for understanding many-body physics in condensed matter systems. Artificial lattices of dopants in silicon are a promising method for the analog quantum simulation of extended Fermi-Hubbard Hamiltonians in the strong interaction regime. However, complex atom-based device fabrication requirements have meant emulating a tunable two-dimensional Fermi-Hubbard Hamiltonian in silicon has not been achieved. Here, we fabricate 3 × 3 arrays of single/few-dopant quantum dots with finite disorder and demonstrate tuning of the electron ensemble using gates and probe the many-body states using quantum transport measurements. By controlling the lattice constants, we tune the hopping amplitude and long-range interactions and observe the finite-size analogue of a transition from metallic to Mott insulating behavior. We simulate thermally activated hopping and Hubbard band formation using increased temperatures. As atomically precise fabrication continues to improve, these results enable a new class of engineered artificial lattices to simulate interactive fermionic models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

The effect of water on colloidal quantum dot solar cells

Almost all surfaces sensitive to the ambient environment are covered by water, whereas the impacts of water on surface-dominated colloidal quantum dot (CQD) semiconductor electronics have rarely been explored. Here, strongly hydrogen-bonded water on hydroxylated lead sulfide (PbS) CQD is identified. The water could pilot the thermally induced evolution of surface chemical environment, which significantly influences the nanostructures, carrier dynamics, and trap behaviors in CQD solar cells. The aggravation of surface hydroxylation and water adsorption triggers epitaxial CQD fusion during device fabrication under humid ambient, giving rise to the inter-band traps and deficiency in solar cells. To address this problem, meniscus-guided-coating technique is introduced to achieve dense-packed CQD solids and extrude ambient water, improving device performance and thermal stability. Our works not only elucidate the water involved PbS CQD surface chemistry, but may also achieve a comprehensive understanding of the impact of ambient water on CQD based electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Development of quantum dot materials for infrared cameras (Final CRADA Report)

The aim of this project was to develop scalable methods to produce infrared (IR) mercury telluride (HgTe) colloidal quantum dot (CQD) thin films and demonstrate their utility in a proof-of-concept monolithic SWIR focal plane array (FPA). These objectives were accomplished by scaling up the HgTe CQD synthesis, characterizing physical and electrical properties of HgTe CQDs, evaluating solution-processed coating methods for quality and efficiency, and developing a process flow to integrate HgTe CQDs with commercial-off-the-shelf silicon CMOS readout circuits by solution-processed coating to produce monolithic FPAs. The FPA is the image sensor in an infrared imaging system responsible for detecting and processing reflected or emitted light into an infrared image of the scene under observation. The quality of the image is determined by the sensitivity and resolution of the image sensor in the system. Higher resolution IR FPAs enable higher throughput in manufacturing quality assurance, wider field of view for autonomous navigation, and longer range surveillance for defense.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Circular quantum dots in twisted bilayer graphene

Within a tight-binding approach, we investigate the effect of twisting angle on the energy levels of circular bilayer graphene (BLG) quantum dots (QDs) in both the absence and presence of a perpendicular magnetic field. The QDs are defined by an infinite-mass potential, so that the specific edge effects are not present. In the absence of magnetic field (or when the magnetic length is larger than the moiré length), we show that the low-energy states in twisted BLG QDs are completely affected by the formation of moiré patterns, with a strong localization at AA-stacked regions. When magnetic field increases, the energy gap of an untwisted BLG QD closes with the edge states, localized at the boundaries between the AA- and AB-stacked spots in a twisted BLG QD. In this work, our observation of the spatial localization of the electrons in twisted BLG QDs can be experimentally probed by low-bias scanning tunneling microscopy measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Platinum-like HER onset in a GNR/MoS 2 quantum dot heterostructure through curvature-dependent electron density reconfiguration

Tailoring the curvature-directed lattice strain in GNRs along with optimal surface anchoring of molybdenum disulfide (MoS 2 ) quantum dots (QDs) can lead to a unique heterostructure with Pt-like HER activity (onset potential –60 mV). The curvature-induced electronic charge redistribution at the curved region in the graphene nanoribbons allows a facile GNR-MoS 2 interfacial charge transfer in the heterostructure, making the interfacial sulfur (S) more active towards the HER. Finally, the density functional theory (DFT) calculations confirmed electronically activated interfacial S-based catalytic centers in the curved GNR-based heterostructure leading to Pt-like HER activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Generation of entangled-photons by a quantum dot cascade source in polarized cavities: Using cavity resonances to boost signals and preserve the entanglements

Motivated by recent advances in the development of single photon emitters for quantum information sciences, here we design and formulate a quantum cascade model that describes cascade emission by a quantum dot (QD) in a cavity structure while preserving entanglement that stores information needed for single photon emission. The theoretical approach is based on a photonic structure that consists of two orthogonal cavities in which resonance with either the first or second of the two emitted photons is possible, leading to amplification and rerouting of the entangled light. The cavity–QD scheme uses a four-level cascade emitter that involves three levels for each polarization, leading to two spatially entangled photons for each polarization. By solving the Schrodinger equation, we identify the characteristic properties of the system, which can be used in conjunction with optimization techniques to achieve the “best” design relative to a set of prioritized criteria or constraints in our optical system. The theoretical investigations include an analysis of emission spectra in addition to the joint spectral density profile, and the results demonstrate the ability of the cavities to act as frequency filters for the photons that make up the entanglements and to modify entanglement properties. The results provide new opportunities for the experimental design and engineering of on-demand single photon sources.

Chemistry↗
DOE OSTI2020

Effect of p-doping on the intensity noise of epitaxial quantum dot lasers on silicon

This work experimentally investigates the impact of p-doping on the relative intensity noise (RIN) properties and subsequently on the modulation properties of semiconductor quantum dot (QD) lasers epitaxially grown on silicon. Owing to the low threading dislocation density and the p-modulation doped GaAs barrier layer in the active region, the RIN level is found very stable with temperature with a minimum value of − <#comment/> 150 d B / H z . The dynamical features extracted from the RIN spectra show that p-doping between zero and 20 holes/dot strongly modifies the modulation properties and gain nonlinearities through increased internal losses in the active region and thereby hinders the maximum achievable bandwidth. Overall, this Letter is important for designing future high-speed and low-noise QD devices integrated in future photonic integrated circuits.

Duan, Jianan (ORCID:0000000177104287)↗
DOE OSTI2020

1.3-µm passively mode-locked quantum dot lasers epitaxially grown on silicon: gain properties and optical feedback stabilization

Abstract This work reports on an investigation of the optical feedback in an InAs/InGaAs passively mode-locked quantum dot (QD) laser epitaxially grown on silicon. Under the stably-resonant optical feedback condition, experiments demonstrate that the radio-frequency linewidth is narrowed whatever the bias voltage applied on the saturable absorber (SA) is; on the other hand, the effective linewidth enhancement factor of the device increases with the reverse bias voltage on the SA, hence it is observed that such an increase influences the mode-locking dynamic and the stability of device under optical feedback. This work gives insights for stabilizing epitaxial QD mode-locked lasers on silicon which is meaningful for their applications in future large-scale silicon electronic and photonic applications requiring low power consumption as well as for high-speed photonic analog-to-digital conversion, intrachip/interchip optical clock distribution and recovery.

Dong, Bozhang (ORCID:0000000158266723)↗
DOE OSTI2023

Optically Excited Lasing in a Cavity‐Based, High‐Current‐Density Quantum Dot Electroluminescent Device

Abstract Laser diodes based on solution‐processable materials can benefit numerous technologies including integrated electronics and photonics, telecommunications, and medical diagnostics. An attractive system for implementing these devices is colloidal semiconductor quantum dots (QDs). The progress towards a QD laser diode has been hampered by rapid nonradiative Auger decay of optical‐gain‐active multicarrier states, fast device degradation at high current densities required for laser action, and unfavorable competition between optical gain and optical losses in a multicomponent device stack. Here we resolve some of these challenges and demonstrate optically excited lasing from fully functional high‐current density electroluminescent (EL) devices with an integrated optical resonator. This advance has become possible due to excellent optical gain properties of continuously graded QDs and a refined device architecture, which allows for highly efficient light amplification in a thin, EL‐active QD layer.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Strain-graded quantum dots with spectrally pure, stable and polarized emission

Structural deformation modifies the bandgap, exciton fine structure and phonon energy of semiconductors, providing an additional knob to control their optical properties. The impact can be exploited in colloidal semiconductor quantum dots (QDs), wherein structural stresses can be imposed in three dimensions while defect formation is suppressed by controlling surface growth kinetics. Yet, the control over the structural deformation of QDs free from optically active defects has not been reached. Here, we demonstrate strain-graded CdSe-ZnSe core-shell QDs with compositionally abrupt interface by the coherent pseudomorphic heteroepitaxy. Resulting QDs tolerate mutual elastic deformation of varying magnitudes at the interface with high structural fidelity, allowing for spectrally stable and pure emission of photons at accelerated rates with near unity luminescence efficiency. We capitalize on the asymmetric strain effect together with the quantum confinement effect to expand emission envelope of QDs spanning the entire visible region and exemplify their use in photonic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Highly efficient photon detection systems for noble liquid detectors based on perovskite quantum dots

Abstract Wavelength shifting photon detection systems (PDS) are the critical functioning components in noble liquid detectors used for high energy physics (HEP) experiments and dark matter search. The vacuum ultraviolet (VUV) scintillation light emitted by these Liquid argon (LAr) and liquid Xenon (LXe) detectors are shifted to higher wavelengths resulting in its efficient detection using the state-of-the-art photodetectors such as silicon photomultipliers (SiPM). The currently used organic wavelength shifting materials [such as 1,1,4,4 Tetraphenyl Butadiene (TPB)] have several disadvantages and are unreliable for longterm use. In this study, we demonstrate the application of the inorganic perovskite cesium lead bromide (CsPbBr 3 ) quantum dots (QDs) as highly efficient wavelength shifters. The absolute photoluminescence quantum yield of the PDS fabricated using these QDs exceeds 70%. CsPbBr 3 -based PDS demonstrated an enhancement in the SiPM signal enhancement by up to 3 times when compared to a 3 µm-thick TPB-based PDS. The emission spectrum from the QDs was optimized to match the highest quantum efficiency region of the SiPMs. In addition, we have demonstrated the deposition of the QD-based wavelength shifting material on a large area PDS substrate using low capital cost and widely scalable solution-based techniques providing a pathway appropriate for meter-scale PDS fabrication and widespread use for other wavelength shifting applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Graphene Quantum Dot Composites Embedded with CoZn Alloy Nanoparticles for Enhanced Oxygen Reduction and Evolution Reactions

Developing efficient and durable electrocatalysts for oxygen reduction (ORR) and oxygen evolution reactions (OER) is crucial for energy conversion technologies. In this study, core–shell graphene quantum dot (GQD) composites embedded with Co, Zn, and CoZn alloy nanoparticles were synthesized using a solid-state microwave synthesis method and systematically investigated for their electrochemical performance. The structural and compositional analyses confirm that the integration of transition metal nanoparticles enhances the electronic properties of GQDs, providing abundant active sites and facilitating charge transfer. Electrochemical characterization reveals that GQD-CoZn-3 (GQD:Co:Zn = 10.5:0.5:0.5) exhibits superior ORR and OER catalytic activities, achieving the highest current densities of 205 A g–1 and 102 A g–1 at 100 mV s–1, respectively. These performance values surpass those of pristine GQDs and single-metal (Co or Zn) embedded counterparts, emphasizing the strong synergistic effect between the CoZn alloy and the functionalized carbon framework. Impedance measurements further reveal a substantial reduction in charge-transfer resistance, while chronoamperometry tests demonstrate excellent catalytic stability and CO tolerance, highlighting the robustness of the core–shell GQD structure. These findings provide valuable insights into the design of advanced carbon-based electrocatalysts for energy applications.

Panda, Pradeep Kumar↗
DOE OSTI2026

Performance of Quantum Dot Coatings for Luminescent Solar Concentrating Windows: Cooperative Research and Development Final Report, CRADA Number CRD-16-00640

The two major outcomes from this DOE supported collaboration between UbiQD and NREL were: 1) an expert analysis/modeling of the expected performance and cost of luminescent solar concentrating windows with quantum dot coatings, and 2) critical R&D characterization of materials and device performance analysis using equipment and processes that are too expensive for UbiQD to perform in-house. The latter also included third-party validation of the device performance with an NREL-certified conversion efficiency that was ultimately published. (see ACS Energy Lett. 2018 and recently ACS Appl. Energy Mater. 2020).

14 SOLAR ENERGY↗
DOE OSTI2021

Electronic Structure Modification of Rectangular Phosphorene Quantum Dots Via Edge Passivation

Phosphorene is an elemental two-dimensional material that shows great promise as a metal-free photocatalyst owing to its high carrier mobility and direct band gap. Doping and edge functionalization of phosphorene can be exploited to tune its band gap and alter other properties. Herein, the electronic properties of a series of edge-passivated monolayer phosphorene quantum dots are investigated using an array of functional groups (OH, SH, NH 2 , SCH 3 , OCN, CN, and Cl) that are known to have electron-donating or electron-withdrawing capabilities. By employing density functional theory calculations, we demonstrate that edge functionalization can perturbatively shift the HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energy levels while simultaneously preserving the geometric structure and other favorable properties of pristine phosphorene. We use the average overall electrostatic potential of these systems to successfully predict the relative positioning of the HOMO and LUMO energy levels while presenting qualitative explanations on potential jumps introduced by the dipole layers formed due to edge functionalization. Furthermore, our results suggest that selective functionalization permits considerable control over the band edge positions, which could be utilized for applications in energy and optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exciton and biexciton transient absorption spectra of CdSe quantum dots with varying diameters

Transient absorption (TA) spectroscopy of semiconductor nanocrystals (NCs) is often used for excited state population analysis, but recent results suggest that TA bleach signals associated with multiexcitons in NCs do not scale linearly with exciton multiplicity. In this manuscript, we probe the factors that determine the intensities and spectral positions of exciton and biexciton components in the TA spectra of CdSe quantum dots (QDs) of five diameters. We find that, in all cases, the peak intensity of the biexciton TA spectrum is less than 1.5 times that of the single exciton TA spectrum, in stark contrast to a commonly made assumption that this ratio is 2. The relative intensities of the biexciton and exciton TA signals at each wavelength are determined by at least two factors: the TA spectral intensity and the spectral offset between the two signals. We do not observe correlations between either of these factors and the particle diameter, but we find that both are strongly impacted by replacing the native organic surface-capping ligands with a hole-trapping ligand. These results suggest that surface trapping plays an important role in determining the absolute intensities of TA features for CdSe QDs and not just their decay kinetics. Our work highlights the role of spectral offsets and the importance of surface trapping in governing absolute TA intensities. It also conclusively demonstrates that the biexciton TA spectra of CdSe QDs at the band gap energy are less than twice as intense as those of the exciton.

Chemistry↗
DOE OSTI2020

Low-threshold laser medium utilizing semiconductor nanoshell quantum dots

Colloidal semiconductor nanocrystals (NCs) represent a promising class of nanomaterials for lasing applications. Currently, one of the key challenges facing the development of high-performance NC optical gain media lies in enhancing the lifetime of biexciton populations. This usually requires the employment of charge-delocalizing particle architectures, such as core/shell NCs, nanorods, and nanoplatelets. Here, we report on a two-dimensional nanoshell quantum dot (QD) morphology that enables a strong delocalization of photoinduced charges, leading to enhanced biexciton lifetimes and low lasing thresholds. A unique combination of a large exciton volume and a smoothed potential gradient across interfaces of the reported CdS bulk /CdSe/CdS shell (core/shell/shell) nanoshell QDs results in strong suppression of Auger processes, which was manifested in this work though the observation of stable amplified stimulated emission (ASE) at low pump fluences. An extensive charge delocalization in nanoshell QDs was confirmed by transient absorption measurements, showing that the presence of a bulk-size core in CdS bulk /CdSe/CdS shell QDs reduces exciton–exciton interactions. Altogether, present findings demonstrate unique advantages of the nanoshell QD architecture as a promising optical gain medium in solid-state lighting and lasing applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗