Search NASA⌕ Search

SEARCH · Search NASA

Results for “Quantum volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High- Q Microwave Dielectric Resonator for Axion Dark-Matter Haloscopes

The frequency band 1–15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high-quality factor cavities that tolerate multitesla fields plays a central role. We report a three-dimensional resonator based on a right-circular copper cavity with hollow cylinders that confine higher-order modes around the cylinder axis. Its effective volume at 10.3 GHz is 3.4 × 10 − 2 l, and under an 8-T field we measure an internal quality factor of more than nine million. A fine-tuning system limited to approximately 1 -MHz range is tested, useful for understanding the conditions required to run a haloscope with a cavity exceeding the axion quality factor. The cavity parameters we report demonstrate the potential of this unique resonator to probe galactic dark-matter axion at scan rates exceeding 2 MHz/day when the cavity is readout by a quantum-limited receiver.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Broken Luttinger theorem in the two-dimensional Fermi-Hubbard model

One of the fundamental questions about high-temperature cuprate superconductors is the size of the Fermi surface underlying the superconducting state. By analyzing the single-particle spectral function for the Fermi-Hubbard model as a function of repulsion U and chemical potential μ, we find that the Fermi surface in the normal state undergoes a transition from a large Fermi surface matching the Luttinger volume as expected in a Fermi liquid, to a Fermi surface that encloses fewer electrons that we dub the “Luttinger breaking” phase, as the Mott insulator is approached. This transition into a non-Fermi-liquid phase that violates the Luttinger count occurs at a critical density in the absence of any other broken symmetry. We obtain the Fermi-surface contour from the spectral weight A k (ω = 0) and from an analysis of the singularities of the Green's function Re G k (E = 0), calculated using determinantal quantum Monte Carlo and analytic continuation methods. We discuss our numerical results in connection with experiments on Hall measurements, scanning tunneling spectroscopy, and angle-resolved photoemission spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Calculating the two-photon exchange contribution to K L → μ + μ − decay

We present a theoretical framework within which both the real and imaginary parts of the complex, two-photon exchange amplitude contributing to K L → μ + μ − decay can be calculated using lattice quantum chromodynamics. The real part of this two-photon amplitude is of approximately the same size as that coming from a second-order weak strangeness-changing neutral-current process. Thus a test of the standard model prediction for this second-order weak process depends on an accurate result of this two-photon amplitude. A limiting factor of our proposed method comes from low-energy three-particle π π γ states. The contribution from these states will be significantly distorted by the finite volume of our calculation—a distortion for which there is no available correction. However, a simple estimate of the contribution of these three-particle states suggests their contribution to be at most a few percent allowing their neglect in a lattice calculation with a 10% target accuracy. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2024

Dynamics and phases of nonunitary Floquet transverse-field Ising model

Inspired by current research on measurement-induced quantum phase transitions, we analyze the nonunitary Floquet transverse-field Ising model with complex nearest-neighbor couplings and complex transverse fields. Unlike its unitary counterpart, the model shows a number of steady phases, stable to integrability-breaking perturbations. Some phases have robust edge modes and/or spatiotemporal long-range orders in the bulk. The transitions between the phases have extensive entanglement entropy, whose scaling with the system size depends on the number of the real quasiparticle modes in the spectrum at the transition. In particular, the volume-law scaling appears on some critical lines, protected by pseudo-Hermiticity. Both the scaling of entanglement entropy in steady states and the evolution after a quench are compatible with the non-Hermitian generalization of the quasiparticle picture of Calabrese and Cardy at least qualitatively. Published by the American Physical Society 2024

Su, Lei (ORCID:0009000455290786)↗
DOE OSTI2025

Finite-volume formalism for physical processes with an electroweak loop integral

This study investigates finite-volume effects in physical processes that involve the combination of long-range hadronic matrix elements with electroweak loop integrals. We adopt the approach of implementing the electroweak part as the infinite-volume version, which is denoted as the EW ∞ method in this work. A general approach is established for correcting finite-volume effects in cases where the hadronic intermediate states are dominated by either a single particle or two particles. For the single-particle case, this work derives the infinite volume reconstruction method from a new perspective. For the two-particle case, we provide the correction formulas for power-law finite-volume effects and unphysical terms with exponentially divergent time dependence. The finite-volume formalism developed in this study has broad applications, including the QED corrections in various processes and the two-photon exchange contribution in 𝐾 𝐿 → 𝜇 + ⁢𝜇 − or 𝜂 → 𝜇 + ⁢𝜇 − decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Kinetics of the luminescence decay of Fe{sup 2+} impurity centres in polycrystalline ZnSe upon excitation by an electron beam

The kinetics of the decay of the luminescence of Fe{sup 2+} ions is measured at nitrogen temperature in polycrystalline ZnSe excited by a short pulse of accelerated electrons. The time dependence of the luminescence intensity differs from the exponential one, observed upon excitation of luminescence by a short light pulse. The obtained nonexponential dependence is theoretically described. The explanation is based on the quenching effect of the excited state of the Fe{sup 2+} ion by free electrons of the volume charge of the current of accelerated electrons in the sample (Auger effect). It was shown that the relaxation of the volume charge after the electron-accelerating voltage is removed makes a significant contribution to the decay kinetics of the impurity luminescence. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Emergent anomalies and generalized Luttinger theorems in metals and semimetals

Luttinger's theorem connects a basic microscopic property of a given metallic crystalline material, the number of electrons per unit cell, to the volume, enclosed by its Fermi surface, which defines its low-energy observable properties. Such statements are valuable since, in general, deducing a low-energy description from microscopics, which may perhaps be regarded as the main problem of condensed matter theory, is far from easy. In this paper, we present a unified framework which allows one to discuss Luttinger theorems for ordinary metals as well as closely analogous exact statements for topological (semi)metals, whose low-energy description contains either discrete points or continuous line nodes. This framework is based on the 't Hooft anomaly of the emergent charge conservation symmetry at each point on the Fermi surface, a concept recently proposed by Else et al. Here we find that the Fermi surface codimension p plays a crucial role for the emergent anomaly. For odd p, such as ordinary metals (p = 1) and magnetic Weyl semimetals (p = 3), the emergent symmetry has a generalized chiral anomaly. For even p, such as graphene and nodal line semimetals (both with p = 2), the emergent symmetry has a generalized parity anomaly. When restricted to microscopic symmetries, such as U(1) and lattice symmetries, the emergent anomalies imply (generalized) Luttinger theorems, relating Fermi surface volume to various topological responses. The corresponding topological responses are the charge density for p = 1, Hall conductivity for p = 3, and polarization for p = 2. As a by-product of our results, we clarify exactly what is anomalous about the surface states of nodal line semimetals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

In situ amplification of spin echoes within a kinetic inductance parametric amplifier

The use of superconducting microresonators together with quantum-limited Josephson parametric amplifiers has enhanced the sensitivity of pulsed electron spin resonance (ESR) measurements by more than four orders of magnitude. So far, the microwave resonators and amplifiers have been designed as separate components due to the incompatibility of Josephson junction–based devices with magnetic fields. This has produced complex spectrometers and raised technical barriers toward adoption of the technique. Here, we circumvent this issue by coupling an ensemble of spins directly to a weakly nonlinear and magnetic field–resilient superconducting microwave resonator. We perform pulsed ESR measurements with a 1-pL mode volume containing 6 × 10 7 spins and amplify the resulting signals within the device. When considering only those spins that contribute to the detected signals, we find a sensitivity of 2.8 x 10 3 spins / $\sqrt{Hz}$ for a Hahn echo sequence at a temperature of 400 mK. In situ amplification is demonstrated at fields up to 254 mT, highlighting the technique’s potential for application under conventional ESR operating conditions.

42 ENGINEERING↗
DOE OSTI2022

Emergence of the spin polarized domains in the kagome lattice Heisenberg antiferromagnet Zn-barlowite (Zn 0.95 Cu 0.05 )Cu 3 (OD) 6 FBr

Kagome lattice Heisenberg antiferromagnets are known to be highly sensitive to perturbations caused by the structural disorder. NMR is a local probe ideally suited for investigating such disorder-induced effects, but in practice, large distributions in the conventional one-dimensional NMR data make it difficult to distinguish the intrinsic behavior expected for pristine kagome quantum spin liquids from disorder-induced effects. Here we report the development of a two-dimensional NMR data acquisition scheme applied to Zn-barlowite (Zn 0.95 Cu 0.05 )Cu 3 (OD) 6 FBr kagome lattice, and successfully correlate the distribution of the low energy spin excitations with that of the local spin susceptibility. We present evidence for the gradual growth of domains with a local spin polarization induced by 5% Cu 2+ defect spins occupying the interlayer non-magnetic Zn 2+ sites. These spin-polarized domains account for ~60% of the sample volume at 2 K, where gapless excitations induced by interlayer defects dominate the low-energy sector of spin excitations within the kagome planes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Predicting phase transitions in PbTi⁢O 3 using zentropy through quasiharmonic phonon calculations

According to x-ray diffraction (XRD) measurements, PbTi⁢O 3 undergoes a phase transition from a tetragonal ferroelectric (FE) phase to a cubic paraelectric phase at 763 K. However, x-ray absorption fine-structure (XAFS) measurements indicate that PbTi⁢O 3 is locally tetragonal even after the phase transition. The difference in these results is because XAFS measurements can probe local features of a structure, while XRD averages over such local features. For both measurements to be consistent, PbTi⁢O 3 is macroscopically cubic but locally tetragonal after the phase transition. Despite this, most models, such as the Landau-Ginsburg-Devonshire theory and effective Hamiltonians, are still unable to explain this phenomenon. Moreover, these methods involve model parameters fitted to experimental or theoretical data and do not consider other tetragonal configurations, such as domain walls, to predict the phase transition. In our previous study, we used our zentropy approach to predict the phase transition by considering the tetragonal FE ground-state configuration and the tetragonal 90° and 180° domain wall configurations with their total energies at 0 K. Here, in this paper, the Helmholtz energies of the three configurations are obtained from density functional theory calculations through energy-volume curves and phonon calculations. The predicted phase transition temperature using the meta-GGA 𝑟 2⁢ SCAN and revised multiplicities of configurations is 716 K, showing good agreement with the experimental value of 763 K.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ultra-high aspect ratio pores milled in diamond via laser, ion and electron beam mediated processes

Microfabrication techniques are critical for the rapid prototyping and development of applications for cutting edge materials. Recently diamond has gained considerable interest for quantum photonic, biosensing, inertial confinement fusion and magnetometer applications. In this article, ultra-high aspect ratio milling of diamond micropores by photon, ion and electron based methods is reported. A multiphoton absorption laser ablation approach is revealed to rapidly produce sub-10 μm diameter micropores in diamond with an aspect ratio of 14:1 and a tapered profile at the surface interface. Chemically active, oxygen focused ion beam milling produces high-aspect ratio pores in diamond with an aspect ratio of 65:1 and minimal tapering over the length of the pore, overcoming the physical interaction volume limitations imposed in conventional gallium based focused ion beam milling and laser ablation methods. Oxygen-mediated electron beam induced etching is revealed to negate the limitations imposed by physical sputtering mechanisms utilized in focused ion beam milling via the direct initiation of chemical reactions at the receding surface, producing aspect ratios on the order of 200:1. Numerical simulations reveal the physical basis for the superior aspect-ratio pore milling of the oxygen focused ion beam milling and electron beam induced etching methods. Our results demonstrate direct-write methods for the fabrication of ultra-high aspect micropores in diamond and provide insight into the underlying mechanisms of these physical processes. The three methods demonstrated here can be interchanged for applications based on the desired characteristic aspect ratio and process throughput.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nanodiamonds in Advancing Biomedical Sciences

Nanodiamonds (NDs), tetrahedral carbon frameworks with size ranging from 1 to 100 nanometers, have gained growing attention in recent years due to their distinct optical, thermal, and mechanical properties compared to other carbon nanomaterials (e.g., graphene, carbon nanotubes, carbon dots). Combined with a high surface-to-volume ratio and tunable and chemically versatile surfaces, these support broad applications across catalysis, electronics, and life sciences. Moreover, the biocompatible characteristics of NDs enable their controllable interfacial interactions with biological systems, positioning them as excellent candidates for advancing cutting-edge biomedical sciences, particularly through the engineering of efficient material-biointerfaces that facilitate optimal interactions with biological systems. Among various forms of NDs, fluorescent nanodiamonds (FNDs) have emerged as some of the most impactful and rapidly advancing materials, demonstrating strong potential in ultrasensitive spin-enhanced bioimaging, high-precision biosensing, traceable drug delivery, and quantum-enabled biomedical technologies. This Perspective introduces the key principles underlying NDs and FNDs, including their structural properties, synthesis methods, and surface functionalization strategies. It also highlights emerging biomedical applications of NDs and FNDs, with particular emphasis on neurological disorders. Last, the article discusses current challenges in advancing NDs as a multifunctional platform for neural therapies with translational potential toward clinical trials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Plasmonic Diamond Membranes for Ultrafast Silicon Vacancy Emission

Silicon vacancy centers (SiVs) in diamond have emerged as a promising platform for quantum sciences due to their excellent photostability, minimal spectral diffusion, and substantial zero-phonon line emission. However, enhancing their slow nanosecond excited-state lifetime by coupling to optical cavities remains an outstanding challenge, as current demonstrations are limited to ~10-fold. Here, we couple negatively charged SiVs to sub-diffraction-limited plasmonic cavities and achieve an instrument-limited ≤8 ps lifetime, corresponding to a 135-fold spontaneous emission rate enhancement and a 19-fold photoluminescence enhancement. Nanoparticles are printed on ultrathin diamond membranes on gold films which create arrays of plasmonic nanogap cavities with ultrasmall volumes. SiVs implanted at 5 and 10 nm depths are examined to elucidate surface effects on their lifetime and brightness. The interplay between cavity, implantation depth, and ultrathin diamond membranes provides insights into generating ultrafast, bright SiV emission for next-generation diamond devices.

Purcell enhancement↗
DOE OSTI2023

Stress-induced structural changes in superconducting Nb thin films

Here we report on the analysis of stress-induced structural changes and the formation of an omega (ω) phase in polycrystalline Nb thin films deposited on Si by high-power impulse magnetron sputtering (HiPIMS) for superconducting qubits using x-ray diffraction (XRD), transmission electron microscopy (TEM), and density-functional theory (DFT). XRD analysis indicates that internal stresses in the Nb thin films lead to the formation of {112}$\langle$111$\rangle$ deformation twins and TEM analysis shows that ω phases nucleate at some of the twin boundaries in the Nb thin films. The size of ω phases ranges from 10 to 100 nm, which is comparable to the coherence length of Nb (≈40 nm), and ≈1% volume fraction of Nb grains exhibit this ω phase. The details of the formation mechanism and superconducting properties of the ω phases are investigated by DFT and potential roles of the ω phase in Nb as a source of decoherence in superconducting qubits are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

3D Cell-centered hydrodynamics with subscale closure model and multi-material remap

We extend a higher-order finite volume cell-centered hydrodynamic (CCH) formulation to include an interface-aware subscale closure model and a multi-material remap for simulating 3D compressible hydrodynamic problems within an arbitrary Lagrangian-Eulerian (ALE) framework. This CCH formulation involves a multidirectional approximate Riemann solution using quadratic polynomial reconstructions of the stress tensor and the velocity. At the subscale level, we determine pair-wise material interactions by solving a distinct approximate Riemann problem at the common interface, using the volume of fluids (VOF) method to find the interface. Material interactions are constrained to ensure smooth pressure equilibration among materials. The accuracy and robustness of the ALE method is demonstrated by simulating a suite of 3D Cartesian multi-material problems covering both gas and solid dynamics, where each test case has two or more materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Axion detection via superfluid 3 He ferromagnetic phase and quantum measurement techniques

We propose to use the nuclear spin excitation in the ferromagnetic A 1 phase of the superfluid 3 He for the axion dark matter detection. This approach is striking in that it is sensitive to the axion-nucleon coupling, one of the most important features of the QCD axion introduced to solve the strong CP problem. We review a quantum mechanical description of the nuclear spin excitation and apply it to the estimation of the axion-induced spin excitation rate. We also describe a possible detection method of the spin excitation in detail and show that the combination of the squeezing of the final state with the Josephson parametric amplifier and the homodyne measurement can enhance the sensitivity. It turns out that this approach gives good sensitivity to the axion dark matter with the mass of $\mathcal{O}$(1) μeV depending on the size of the external magnetic field. We estimate the parameters of experimental setups, e.g., the detector volume and the amplitude of squeezing, required to reach the QCD axion parameter space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Exponential Improvements in the Simulation of Lattice Gauge Theories Using Near-Optimal Techniques

We report a first-of-its-kind analysis on post-Trotter simulation of U(1), SU(2), and SU(3) lattice gauge theories including fermions in arbitrary spatial dimension. We provide explicit circuit constructions as well as T-gate counts and logical qubit counts for Hamiltonian simulation. We find a reduction of up to 25 orders of magnitude in space-time volume over Trotter methods for simulations of non-Abelian lattice gauge theories relevant to the standard model. This improvement results from our algorithm having polynomial scaling with the number of colors in the gauge theory, achieved by utilizing oracle constructions relying on the sparsity of physical operators, in contrast to the exponential scaling seen in state-of-the-art Trotter methods, which employ explicit mappings onto Pauli operators. Our work demonstrates that the use of advanced algorithmic techniques leads to dramatic reductions in the cost of simulating fundamental interactions, bringing it in step with resources required for first-principles quantum simulation of chemistry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Foreword: Special Section on Multiphysics Aspects of Power Electronics Packaging—Power Die, Power Module, and Converter Level: Part 2

Power electronics are increasingly being used to condition electricity for a wide array of applications, such as transportation (on land, air, and water), data centers, radio frequency, directed energy, wind, solar, and grid-tied applications. Here, to increase power density, performance, efficiency, and reliability-as well as to reduce cost-innovations and developments are needed in the multiphysics packaging of power electronics at a die, module, and converter level. This includes fundamental R&D related to emerging high-voltage, high-temperature, and high-switching-frequency power electronics, packaging materials, thermal materials and interfaces, fluid-based thermal management technologies, reliability, condition monitoring, and prognostics. Latest developments in this area are published as a Special Section on Multiphysics Aspects of Power Electronics Packaging. The first part was published in the May 2024 issue of the IEEE Transactions on Components, Packaging and Manufacturing Technology (Volume 14, Issue 5). The second part of that Special Section is being published in this issue. A brief summary of the papers included in the second part are given below.

24 POWER TRANSMISSION AND DISTRIBUTION↗