Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADAR method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Correlation methods

A method for processing complex radar data with a computer using correlation functions is reviewed. Parameters including data storage, data reduction, and real time operation are addressed. Since complex auto- and cross-correlation functions are calculated and stored, almost no information is lost. These also can be analyzed in terms of the full correlation analysis of the spaced-antenna-drifts technique. The proposed approach therefore appears to be very feasible to suit most Mesosphere-Stratosphere-Troposphere (MST) radar applications.

Rottger, J.↗
NASA NTRS1984

Partial Reflection Spaced Antenna Wind Measurements

The nature of partially reflecting (PR) irregularities is briefly reviewed and the techniques used in the PR spaced antenna method are discussed. The radars addressed use frequencies in the 2 to 6 MHz range operate in a pulse mode at vertical incidence. Radar system parameters including receiver dynamic range, coherent and incoherent detection, and post detection filtering are examined. Finally, data system parameters and real time analysis techniques are discussed.

Fraser, G. J.↗
NASA NTRS1992

Relative phase calibration of the NASA/DC-8 three-frequency polarimetric SAR system

Relative phase calibration of radar polarimetry data may be achieved by utilizing the phase information of the receiver calibration tone and knowledge of the antenna path differences among channels measured upon installation of the radar polarimeter. This calibration method does not require any assumptions on the scattering behavior of the scene. This method of phase calibration may be verified by examining the polarization signatures of calibration instruments such as the trihedral corner reflectors.

Lou, Yunling↗
NASA NTRS2004

Lunar and Planetary Science XXXV: Impacts: Observations and Experiments

The title in this section include: 1) Impactites of the Haughton Impact Structure, Devon Island, Nunavut, Canada; 2) Geochemical Characteristics of Impactites from the Yaxcopoil-1 ICDP Drill Core, Chicxulub Impact Structure, Mexico; 3) Investigation of the Ries Impact Crater Based upon Old and New Geophysical Data and Numerical Modeling; 4) Potential of Radar Imaging and Sounding Methods in Mapping Heavily Eroded Impact Craters: Mapping Some Structural Elements of the Hico Crater, TX; 5) From Simple to Complex Craters: The Mechanics of Late-time Crater Adjustments; 6) Impact Structures: What Does Crater Diameter Mean? 7) Early-Time Temperature Evolution of the Impact Flash and Beyond; 8) Probing Impact-Generated Vapor Plumes; 9) Non-Ballistic Vapor-Driven Ejecta; 10) Depth and Diameter of Transient Craters; 11) A Plausibility of Z-Model; 12) Experiments with Explosives and Ordnance Disposal Devices for the Simulation of Specific Processes During Shallow-Marine Impacts; 13) Collisional Fragmentation of Rotating Bodies.

Source record↗
NASA NTRS2005

Microwave and Millimeter Wave Imaging Using Synthetic Aperture Focusing and Holographical Techniques

Microwave and millimeter wave nondestructive testing and evaluation (NDT&E) methods have shown great potential for determining material composition in composite structures, determining material thickness or debond thickness between two layers, and determining the location and size of flaws, defects, and anomalies. The same testing methods have also shown great potential to produce relatively high-resolution images of voids inside Spray On Foam Insulation (SOFI) test panels using real focused methods employing lens antennas. An alternative to real focusing methods are synthetic focusing methods. The essence of synthetic focusing is to match the phase of the scattered signal to measured points spaced regularly on a plane. Many variations of synthetic focusing methods have already been developed for radars, ultrasonic testing applications, and microwave concealed weapon detection. Two synthetic focusing methods were investigated; namely, a) frequency-domain synthetic aperture focusing technique (FDSAFT), and b) wide-band microwave holography. These methods were applied towards materials whose defects were of low dielectric contrast like air void in SOFI. It is important to note that this investigation used relatively low frequencies from 8.2 GHz to 26.5 GHz that are not conducive for direct imaging of the SOFI. The ultimate goal of this work has been to demonstrate the capability of these methods before they are applied to much higher frequencies such as the millimeter wave frequency spectrum (e.g., 30-300 GHz).

Case, Joseph Tobias↗
NASA NTRS2011

An Overview of the Total Lightning Jump Algorithm: Past, Present and Future Work

Rapid increases in total lightning prior to the onset of severe and hazardous weather have been observed for several decades. These rapid increases are known as lightning jumps and can precede the occurrence of severe weather by tens of minutes. Over the past decade, a significant effort has been made to quantify lightning jump behavior in relation to its utility as a predictor of severe and hazardous weather. Based on a study of 34 thunderstorms that occurred in the Tennessee Valley, early work conducted in our group at Huntsville determined that it was indeed possible to create a reasonable operational lightning jump algorithm (LJA) based on a statistical framework relying on the variance behavior of the lightning trending signal. We the expanded this framework and tested several variance-related LJA configurations on a much larger sample of 87 severe and non severe thunderstorms. This study determined that a configuration named the "2(sigma)" algorithm had the most promise in development of the operational LJA with a probability of detection (POD) of 87%, a false alarm rate (FAR) of 33%, a Heidke Skill Score (HSS) of 0.75. The 2(sigma) algorithm was then tested on an even larger sample of 711 thunderstorms of all types from four regions of the country where total lightning measurement capability existed. The result was very encouraging.Despite the larger number of storms and the inclusion of different regions of the country, the POD remained high (79%), the FAR was low (36%) and HSS was solid (0.71). Average lead time from jump to severe weather occurrence was 20.65 minutes, with a standard deviation of +/- 15 minutes. Also, trends in total lightning were compared to cloud to ground (CG) lightning trends, and it was determined that total lightning trends had a higher POD (79% vs 66%), lower FAR (36% vs 54 %) and a better HSS (0.71 vs 0.55). From the 711-storm case study it was determined that a majority of missed events were due to severe weather producing thunderstorms in low flashing environments. The latest efforts have been geared toward examining these low flashing storms in order to adjust the algorithm for such storms, thus enhancing the capability of the LJA. Future work will test the algorithm in real time using current satellite and radar based cell tracking methods, as well as, comparing total lightning jump occurrence to both satellite based and ground base observations of thunderstorms to create correlations between lightning jumps and the observed structures within thunderstorms. Finally this algorithm will need to be tested using Geostationary Lightning Mapper proxy data to transition the algorithm from VHF ground based lightning measurements to lower frequency space-based lightning measurements.

Schultz, Christopher J.↗
NASA NTRSDate not supplied

Surface Expression of Bed Topography in Greenland and Antarctica

It has long been recognized that major subglacial topographic features beneath the Greenland and Antarctic ice sheets – whether especially prominent or wide – can generate an observable surface expression. Recent advances in digital elevation models (ArcticDEM, REMA) and bed-to-surface transfer theory now permit widespread observation of this phenomena and a more robust interpretation. Hillshading a digital elevation model from the direction of ice flow permits straightforward detection of major surface features. For Greenland, comparison against the growing catalog of airborne radar-sounding data confirms that the large majority of these features are associated with subglacial topography – typically valleys. These observations suggest a better path toward interpolating subglacial topography between sparse radar observations by developing methods that also require fidelity to observed surface relief.

Joe Macgregor↗
NASA NTRSDate not supplied

Satellite Based Precipitation Estimation in Orographic Regions within the Southwestern United States

Predicting precipitation-induced landslides requires accurate estimation of orographic precipitation. Many research studies have been done to estimate orographic precipitation using measurement/estimation methods that include rain gauges, ground-based radar, satellite-based estimates, and modeling. Each method has strengths and weaknesses, but none have been able to fully resolve orographic precipitation. The Integrated Multi-satellitE Retrievals for Global Precipitation Measurement Mission (IMERG) early run product provides precipitation estimates at a 0.1° spatial resolution, at half-hour time scales, with only a 4-hour latency. This product is currently used for the global landslide hazard assessment, but there are known issues in mountainous terrain that the IMERG algorithm has not been able to fully resolve; and the sparse gauge density in these regions makes it even more difficult. In this study, precipitation events were identified using high temporal resolution (5-15 minute) precipitation observations from rain gauges in mountainous terrain in the southwestern United States. The brightness temperature from several infrared (IR) bands from the Geostationary Operational Environmental Satellite (GOES) 16 satellite were used to estimate precipitation with a k-nearest neighbor machine learning model. Compared to IMERG, the IR estimates from GOES-16 performed better at predicting gauge-identified precipitation events. Additionally, the IR-only based estimates were able to estimate precipitation when IMERG failed to detect precipitation, false negative events. While additional analysis is needed, results indicate the need for better integration of IR observations for more accurate precipitation estimation in mountainous regions.

Jessica Sutton↗
DOE OSTI2015

Joint retrievals of cloud and drizzle in marine boundary layer clouds using ground-based radar, lidar and zenith radiances

Active remote sensing of marine boundary-layer clouds is challenging as drizzle drops often dominate the observed radar reflectivity. We present a new method to simultaneously retrieve cloud and drizzle vertical profiles in drizzling boundary-layer clouds using surface-based observations of radar reflectivity, lidar attenuated backscatter, and zenith radiances under conditions when precipitation does not reach the surface. Specifically, the vertical structure of droplet size and water content of both cloud and drizzle is characterised throughout the cloud. An ensemble optimal estimation approach provides full error statistics given the uncertainty in the observations. To evaluate the new method, we first perform retrievals using synthetic measurements from large-eddy simulation snapshots of cumulus under stratocumulus, where cloud water path is retrieved with an error of 31 g m -2 . The method also performs well in non-drizzling clouds where no assumption of the cloud profile is required. We then apply the method to observations of marine stratocumulus obtained during the Atmospheric Radiation Measurement MAGIC deployment in the Northeast Pacific. Here, retrieved cloud water path agrees well with independent three-channel microwave radiometer retrievals, with a root mean square difference of 10–20 g m -2 .

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

Using Distributed Targets To Determine SAR Antenna Patterns

Improved method of determining radiation pattern of synthetic-aperture radar (SAR) antenna with respect to elevation-angle coordinate (angle of roll about flight path) devised. Essence of method is solving radar equation in such way as to enable extraction of antenna pattern from SAR images of uniform distributed targets. Needed because radiation pattern in flight can differ from that observed in laboratory test of antenna. Computations include subtraction of noise, test for uniformity, and least-squares estimate.

Freeman, Anthony↗
NASA NTRS1993

A radar altitude and line of sight attachment

This paper describes a method of overcoming much of the computational expense of finding radar altitude and determining lines of sight in flight simulations over databases built from polygons. Methods are described for quantizing polygonal databases and for searching through them quickly. Various tuning parameters are explained and run-time performance figures are offered.

Sansom, Russell↗
NASA NTRS2000

Radar Reflectivity of the Martian Polar Regions

Radar experiments provide a unique method of probing the surfaces and subsurfaces of planetary bodies. Information on surface and subsurface structures and properties can be extracted from radar data. There is a well developed history of radar investigations of the planet Mars, beginning with the first reports of variations of scattering properties as a function of martian longitude in the mid-1960's. Because of the rapid rotation of Mars, the standard technique of delay-doppler mapping cannot be used as effectively as it is on Mercury and Venus, making it a more difficult radar target. Techniques have been developed to overcome this difficulty, including an inversion technique to combine many doppler-only (CW) experiments from different viewing geometries into a map of surface reflectivity, and new random long-code techniques. These techniques still suffer from ambiguities, however. A third technique which does not suffer from these ambiguities is the combination of the powerful Goldstone transmitter with the VLA as the receiving instrument to create a combined radar imaging instrument. We have used this combined radar instrument to image the surface of Mars in 3.5-cm radar reflectivity during the 1988, 1992/93, and 1999 oppositions. During the 1988 experiments, the residual south polar ice cap (RSPIC) was the brightest radar reflector on the planet - intrinsically brighter than even the Tharsis lava flows. This was quite an unexpected result. In contrast, during the 1992/93 experiments, the residual north polar ice cap (RNPIC) was not nearly so bright, and in fact showed no enhancement at all, This was puzzling, given the 1988 results for the RSPIC. We attributed the lack of a radar reflection enhancement to a combination of three effects: the geometry was different; the season was different; and the intrinsic scattering from the residual ice caps was different. The 1999 experiments provided a chance to test the relative importance of these three effects, since the RNPIC would be visible in a geometry very similar to the RSPIC in 1988, and the season would also be very similar. Preliminary reduction of the data taken in 1999 shows that the RNPIC did in fact show a radar reflectivity enhancement, but that it was still not as bright as the RSPIC in 1988. Details regarding the radar reflectivity of the residual ice caps, as well as the surrounding polar layered terrains (in light of our radar reflectivity data) will be discussed. Additional information is contained in the original extended abstract.

Butler, B. J.↗
NASA NTRS1988

Simulation of ocean SAR images via phase history generation

A method for simulating an ocean synthetic-aperture radar (SAR) image is illustrated for a simple internal wave current pattern. The method calculates both the amplitude image and the radar signal history. The simulation model used consists of six stages. In the first stage, the full wave spectrum in two spatial coordinates is calculated from the wind speed and direction using the action spectral density equation. In the second stage, the pixel size is selected and used as the basis for dividing the spectrum into large and small scale motions. Realizations for the large-scale ocean surface height and velocity are then calculated. In the third stage, the sensor wavelength and geometry are used to calculate the small scale statistics (radar cross section, coherence time, root-mean square (RMS), radial velocity and RMS slope). In the fourth stage, an autoregressive method is used to generate a realization of the surface reflectivity history that is consistent with the radial velocity and the radial velocity variance. In the fifth stage, the signal history is generated by summing the reflectivities at the proper times with the appropriate antenna weighting function for the SAR. As a consequence of this process, speckle is automatically included in the signal. In the final stage, the SAR image can be created by using any of the traditional ways to process the signal history, including variable focusing and multilook processing.

Bennett, John R.↗
NASA NTRS1996

New results from mapping Antarctica at high resolution from radar altimeter data

The limits of the altimeter data evaluation were analyzed using geostatistical methods. It is often argued that satellite radar altimeter data over ice can not be used to map ice surfaces with a slope exceeding 0.5 deg. The maps presented, obtained from the Geosat satellite geodetic mission, concern the Antarctica north of 72.1 deg South. The grids constructed from other satellite observations facilitate the analysis of the changes in the Antarctic ice stream/ice shelf systems. The evaluation was applied to the Lambert Glacier/Amery Ice Shelf system.

Matassa, Michael↗
NASA NTRS2011

Wavelet Filter Banks for Super-Resolution SAR Imaging

This paper discusses Innovative wavelet-based filter banks designed to enhance the analysis of super resolution Synthetic Aperture Radar (SAR) images using parametric spectral methods and signal classification algorithms, SAR finds applications In many of NASA's earth science fields such as deformation, ecosystem structure, and dynamics of Ice, snow and cold land processes, and surface water and ocean topography. Traditionally, standard methods such as Fast-Fourier Transform (FFT) and Inverse Fast-Fourier Transform (IFFT) have been used to extract Images from SAR radar data, Due to non-parametric features of these methods and their resolution limitations and observation time dependence, use of spectral estimation and signal pre- and post-processing techniques based on wavelets to process SAR radar data has been proposed. Multi-resolution wavelet transforms and advanced spectral estimation techniques have proven to offer efficient solutions to this problem.

Sheybani, Ehsan O.↗
NASA NTRS1972

GEOS-2 C-band radar system project. Spectral analysis as related to C-band radar data analysis

Work performed on spectral analysis of data from the C-band radars tracking GEOS-2 and on the development of a data compaction method for the GEOS-2 C-band radar data is described. The purposes of the spectral analysis study were to determine the optimum data recording and sampling rates for C-band radar data and to determine the optimum method of filtering and smoothing the data. The optimum data recording and sampling rate is defined as the rate which includes an optimum compromise between serial correlation and the effects of frequency folding. The goal in development of a data compaction method was to reduce to a minimum the amount of data stored, while maintaining all of the statistical information content of the non-compacted data. A digital computer program for computing estimates of the power spectral density function of sampled data was used to perform the spectral analysis study.

Source record↗
NASA NTRS1991

Dual-parameter radar rainfall measurement from space - A test result from an aircraft experiment

An aircraft experiment has been conducted with a dual-frequency (X/Ka-bands) radar to test various rainfall retrieval methods from space. The authors test a method to derive raindrop size distribution (DSD) parameters from the combination of a radar reflectivity profile and a path-integrated attenuation derived from surface return, which may be available from most spaceborne radars. The estimated DSD parameters are reasonable in that the values generally fall within the range of commonly measured ones and that shifts in DSD parameters appear to be correlated with changes in storm type. The validity of the estimation result is also demonstrated by a consistency check using the Ka-band reflectivity profile which is independent of the DSD estimation process. Although errors may occur in the cases of nonuniform beam filling, these test results indicate the feasibility of the dual-parameter radar measurement from space in achieving a better accuracy in quantitative rainfall remote measurements.

Kozu, Toshiaki↗
NASA NTRS1975

Sequential and simultaneous SLAR block adjustment

Two sequential methods of planimetric SLAR (Side Looking Airborne Radar) block adjustment, with and without splines, and three simultaneous methods based on the principles of least squares are evaluated. A limited experiment with simulated SLAR images indicates that sequential block formation with splines followed by external interpolative adjustment is superior to the simultaneous methods such as planimetric block adjustment with similarity transformations. The use of the sequential block formation is recommended, since it represents an inexpensive tool for satisfactory point determination from SLAR images.

Leberl, F.↗