Search NASA⌕ Search

SEARCH · Search NASA

Results for “Random Effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Optimizing Altitude Sampling and Sensitivity with the Goldstone Orbital Debris Radar

The NASA Orbital Debris Program Office (ODPO) has used the Goldstone Orbital Debris Radar (Goldstone) since 1993 to characterize orbital debris (OD) in low Earth orbit too small to be tracked by the U.S. Space Surveillance Network. Operated by NASA’s Jet Propulsion Laboratory, Goldstone can measure OD as small as 3 mm at 1000 km altitude and lower. Goldstone is a bistatic radar that for 25 years used Deep Space Station (DSS)-14 as a transmitter and DSS-15 as a receiver. In early 2018, DSS-15 was decommissioned and replaced with DSS-25 (and occasionally DSS-26) of the Deep Space Network Apollo Cluster. The increased baseline between DSS-14 and DSS-25 significantly reduced the instantaneous altitude coverage of the bistatic beam overlap. Initial measurements in 2018 were focused around 800 km, which has approximately the highest flux of sub-centimeter debris. In 2019, DSS-14 was offline for maintenance, and the ODPO designed an annual survey observation plan to efficiently sample altitudes from 700 km to 1000 km, since many NASA satellites fly in this range. This paper discusses the observation plan, including the development of the pointings, a refinement of the altitudes of interest, and an analysis of the effects of random pointing errors on beam overlap. Additionally, results from measurements taken in 2020 and 2021 are presented, showing that not only is the observation plan effective at sampling 700 km to 1000 km altitude, but it is also producing the most sensitive terrestrial radar measurements at these altitudes to date.

James Murray↗

DARK AND LUMINOUS MATTER IN THINGS DWARF GALAXIES

We present mass models for the dark matter component of seven dwarf galaxies taken from 'The H I Nearby Galaxy Survey' (THINGS) and compare these with those taken from numerical {Lambda} cold dark matter ({Lambda}CDM) simulations. The THINGS high-resolution data significantly reduce observational uncertainties and thus allow us to derive accurate dark matter distributions in these systems. We here use the bulk velocity fields when deriving the rotation curves of the galaxies. Compared to other types of velocity fields, the bulk velocity field minimizes the effect of small-scale random motions more effectively and traces the underlying kinematics of a galaxy more properly. The 'Spitzer Infrared Nearby Galaxies Survey' 3.6 {mu}m and ancillary optical data are used for separating the baryons from their total matter content in the galaxies. The sample dwarf galaxies are found to be dark matter dominated over most radii. The relation between total baryonic (stars + gas) mass and maximum rotation velocity of the galaxies is roughly consistent with the baryonic Tully-Fisher relation calibrated from a larger sample of gas-dominated low-mass galaxies. We find discrepancies between the derived dark matter distributions of the galaxies and those of {Lambda}CDM simulations, even after corrections for non-circular motions have been applied. The observed solid body-like rotation curves of the galaxies rise too slowly to reflect the cusp-like dark matter distribution in cold dark matter halos. Instead, they are better described by core-like models such as pseudo-isothermal halo models dominated by a central constant-density core. The mean value of the logarithmic inner slopes of the mass density profiles is {alpha} = -0.29 {+-} 0.07. They are significantly different from the steep slope of {approx} - 1.0 inferred from previous dark-matter-only simulations, and are more consistent with shallower slopes found in recent {Lambda}CDM simulations of dwarf galaxies in which the effects of baryonic feedback processes are included.

79 ASTRONOMY AND ASTROPHYSICS↗

Probabilistic flux limiters

The stable numerical integration of shocks in compressible flow simulations relies on the reduction or elimination of Gibbs phenomena (unstable, spurious oscillations). A popular method to virtually eliminate Gibbs oscillations caused by numerical discretization in under-resolved simulations is to use a flux limiter. A wide range of flux limiters have been studied in the literature, with recent interest in their optimization via machine learning methods trained on high-resolution datasets. The common use of flux limiters in numerical codes as plug-and-play blackbox components makes them key targets for design improvement. Even for deterministic dynamical models, numerical uncertainty is introduced via coarse-graining required by insufficient computational power to solve all scales of motion. Conventional flux limiters are deterministic and lack the capacity to address uncertainties, both aleatoric (inherent randomness) and epistemic (modeling uncertainty due to limited knowledge), which arise in coarse-grained numerical simulations. Here, we introduce a conceptually distinct type of flux limiter that is designed to handle the effects of randomness in the model and uncertainty in model parameters. Unlike traditional single-function flux limiters, these new probabilistic flux limiters incorporate multiple flux limiting functions, each applied with a learned probability drawn from high-resolution data to mitigate the effects of uncertainty in numerical simulations. This approach departs from traditional single-function limiters by explicitly modeling and incorporating uncertainty into the shock capturing process. Using the example of Burgers' equation as a testbed, we show that a machine learned, probabilistic flux limiter may be used in a shock capturing code to more accurately capture shock profiles. In particular, we show that our probabilistic flux limiter outperforms standard limiters and can be successively improved upon (up to a point) by expanding the set of probabilistically chosen flux limiting functions.

97 MATHEMATICS AND COMPUTING↗

Sonic boom interaction with turbulence

A recently developed transonic small-disturbance model is used to analyze the interactions of random disturbances with a weak shock. The model equation has an extended form of the classic small-disturbance equation for unsteady transonic aerodynamics. It shows that diffraction effects, nonlinear steepening effects, focusing and caustic effects and random induced vorticity fluctuations interact simultaneously to determine the development of the shock wave in space and time and the pressure field behind it. A finite-difference algorithm to solve the mixed-type elliptic hyperbolic flows around the shock wave is presented. Numerical calculations of shock wave interactions with various deterministic vorticity and temperature disturbances result in complicate shock wave structures and describe peaked as well as rounded pressure signatures behind the shock front, as were recorded in experiments of sonic booms running through atmospheric turbulence.

Zvi Rusak↗

Tensor effective interaction in self-consistent random-phase approximation calculations

We present a study of the effects of the tensor-isospin term of the effective interaction in Hartree-Fock and random-phase approximation calculations. We used finite-range forces of Gogny type, and we added to them a tensor-isospin term which behaves, at large internucleonic distances, as the analogous term of the microscopic interactions. The strength of this tensor force has been chosen to reproduce the experimental energy of the lowest 0{sup -} excited state in {sup 16}O, which shows large sensitivity to this term of the interaction. With these finite-range interactions, we have studied the effects of the tensor-isospin force in ground and excited states of carbon, oxygen, calcium, nickel, zirconium, tin, and lead isotopes. Our results show that the tensor force affects mainly the nucleon single-particle energies. However, we found some interesting cases where also bulk nuclear properties are sensitive to the tensor interaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The simulation of coherent structures in a laminar boundary layer

Coherent structures in turbulent shear flows were studied extensively by several techniques, including the VITA technique which selects rapidly accelerating or decelerating regions in the flow. The evolution of a localized disturbance in a laminar boundary layer shows strong similarity to the evolution of coherent structures in a turbulent-wall bounded flow. Starting from a liftup-sweep motion, a strong shear layer develops which shares many of the features seen in conditionally-sampled turbulent velocity fields. The structure of the shear layer, Reynolds stress distribution, and wall pressure footprint are qualitatively the same, indicating that the dynamics responsible for the structure's evolution are simple mechanisms dependent only on the presence of a high mean shear and a wall and independent of the effects of local random fluctuations and outer flow effects. As the disturbance progressed, the development of streak-like-high- and low-speed regions associated with the three-dimensionality.

Breuer, Kenny↗

Electrolytic currents in Europa

The transverse electric (TE) and transverse magnetic (TM) currents at the Europan surface are calculated. The study was performed because of the proximity of Europa to Jupiter, which has a strong magnetic field, and the presence of a conductor (water ice) in copious quantities on the Europan surface. The moon is assumed to have a silica interior, an ice layer and, in places, an intermediate liquid layer. Account is taken of surface eddy currents, the maximum current density in the surface and a saline liquid layer, and the TM magnitudes with different liquid layer thicknesses. The effects of random appearances of vertical cracks in the ice are also considered. The calculations indicate that the surface currents could be higher on Europa than on Io, but may be too weak to produce heating effects sufficient to prevent refreezing of a crack.

Colburn, D. S.↗

WE-AB-209-01: A Monte Carlo-Based Method to Include Random Errors in Robust Optimization

Purpose: To develop an efficient method to implement random set-up errors and organ motion in robust optimization for proton therapy treatment planning. Methods: The plans were created with an in-house robust optimizer, coupled with a super-fast Monte Carlo (MC) engine (less than 1 minute for final dose). MC simulates random errors by shifting randomly the starting point of each particle, according to their probability distribution. Such strategy assumes a sufficient number of treatment fractions. Two strategies are presented: 1) Full robust optimization with beamlets that already include the effect of random errors and 2) Mixed robust optimization, where the nominal beamlets are involved but a correction term C modifies the prescription. Starting from C=0, the method alternates optimization of the spot weights with the nominal beamlets and updates of C, with C=Drandom-Dnominal and where Drandom results from a regular MC computation (without pre-computed beamlets) that simulates random errors. Updates of C can be triggered as often as necessary by running the MC engine with the last corrected values for the spot weights as input. The method was applied to lung and prostate cases. For both patients the range error was set to 3%, systematic setup error to 5mm and standard deviation for random errors to 5 mm. Comparison between full robust optimization and the mixed strategy (with 3 updates of C) is presented. Results: Target coverage was far below the clinical constraints (D{sub 95} > 95% of the prescribed dose) for plans where random errors were not simulated, especially for lung case. However, by using the proposed strategies the plans achieved a target coverage above clinical constraints. Conclusion: Full robust optimization gives better results than the mixed strategy, but the latter can be useful in cases where a MC engine is not available or too computationally intensive for beamlets calculation.

60 APPLIED LIFE SCIENCES↗

Generalized logarithmic scaling for high-order moments of the longitudinal velocity component explained by the random sweeping decorrelation hypothesis

Expressions for the logarithmic variations of the normalized turbulent longitudinal velocity ($\overline{u^2p}^+$)1/p with normalized distance z/δ from a boundary for high-order (p) moments in the intermediate region of wall bounded flows characterized by thickness δ are derived. The ansatz that ($\overline{u^2p}^+$)1/p variation in ln(z/δ) originates from a compound effect of random sweeping and -1 power-law scaling in the longitudinal velocity spectrum E u (k) is discussed, where k is the wavenumber. Using velocity time series sampled above a uniform ice sheet, an E u (k) ~ k-1 scaling is confirmed for kz < 1 and kδ > 1. The data were then used to analyze assumptions required for the utility of the random sweeping decorrelation (RSD) hypothesis connecting the k-1 power-law with log-scaling in ($\overline{u^2p}^+$)1/p. It has been found out that while the RSD hypothesis is operationally applicable to scales associated with attached eddies bounded by kz < 1 and kδ > 1, significant interactions among high-order turbulent velocity and velocity increments lead to the conclusion that the RSD hypothesis cannot be exactly valid. Lastly, its operational utility stems from the observations that some of the interaction terms among the high-order velocity and velocity increments act in opposite directions thereby canceling their additive effects in RSD.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Robustness analysis of an air heating plant and control law by using polynomial chaos

This paper presents a robustness analysis of an air heating plant with a multivariable closed-loop control law by using the polynomial chaos methodology (MPC). The plant consists of a PVC tube with a fan in the air input (that forces the air through the tube) and a mass flux sensor in the output. A heating resistance warms the air as it flows inside the tube, and a thermo-couple sensor measures the air temperature. The plant has thus two inputs (the fan's rotation intensity and heat generated by the resistance, both measured in percent of the maximum value) and two outputs (air temperature and air mass flux, also in percent of the maximal value). The mathematical model is obtained by System Identification techniques. The mass flux sensor, which is nonlinear, is linearized and the delays in the transfer functions are properly approximated by non-minimum phase transfer functions. The resulting model is transformed to a state-space model, which is used for control design purposes. The multivariable robust control design techniques used is the LQG/LTR, and the controllers are validated in simulation software and in the real plant. Finally, the MPC is applied by considering some of the system's parameters as random variables (one at a time, and the system's stochastic differential equations are solved by expanding the solution (a stochastic process) in an orthogonal basis of polynomial functions of the basic random variables. This method transforms the stochastic equations in a set of deterministic differential equations, which can be solved by traditional numerical methods (That is the MPC). Statistical data for the system (like expected values and variances) are then calculated. The effects of randomness in the parameters are evaluated in the open-loop and closed-loop pole's positions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of signal jitter on the spectrum of rotor impulsive noise

The effect of randomness or jitter of the acoustic waveform on the spectrum of rotor impulsive noise is studied because of its importance for data interpretation. An acoustic waveform train is modelled representing rotor impulsive noise. The amplitude, shape, and period between occurrences of individual pulses are allowed to be randomized assuming normal probability distributions. Results, in terms of the standard deviations of the variable quantities, are given for the autospectrum as well as special processed spectra designed to separate harmonic and broadband rotor noise components. Consideration is given to the effect of accuracy in triggering or keying to a rotor one per revolution signal. An example is given showing the resultant spectral smearing at the high frequencies due to the pulse signal period variability.

Brooks, Thomas F.↗

Effect of signal jitter on the spectrum of rotor impulsive noise

The effect of randomness or jitter of the acoustic waveform on the spectrum of rotor impulsive noise is studied because of its importance for data interpretation. An acoustic waveform train is modeled representing rotor impulsive noise. The amplitude, shape, and period between occurrences of individual pulses are allowed to be randomized assuming normal probability distributions. Results, in terms of the standard deviations of the variable quantities, are given for the autospectrum as well as special processed spectra designed to separate harmonic and broadband rotor noise components. Consideration is given to the effect of accuracy in triggering or keying to a rotor one per revolution signal. An example is given showing the resultant spectral smearing at the high frequencies due to the pulse signal period variability.

Brooks, Thomas F.↗

Response of linear dynamic systems with random coefficients

Numerous models of physical systems contain parameters whose values are not known exactly. The physical and mathematical complexities arising in the prediction of the statistical behavior of such systems are discussed. Although the discussions are far from providing a satisfactory solution to such problems, they perhaps, by utilization of simple examples, will create a greater awareness of the statistical effect of random parameters.

Dickerson, J.↗

Comparison of three controllers applied to helicopter vibration

A comparison was made of the applicability and suitability of the deterministic controller, the cautious controller, and the dual controller for the reduction of helicopter vibration by using higher harmonic blade pitch control. A randomly generated linear plant model was assumed and the performance index was defined to be a quadratic output metric of this linear plant. A computer code, designed to check out and evaluate these controllers, was implemented and used to accomplish this comparison. The effects of random measurement noise, the initial estimate of the plant matrix, and the plant matrix propagation rate were determined for each of the controllers. With few exceptions, the deterministic controller yielded the greatest vibration reduction (as characterized by the quadratic output metric) and operated with the greatest reliability. Theoretical limitations of these controllers were defined and appropriate candidate alternative methods, including one method particularly suitable to the cockpit, were identified.

Leyland, Jane A.↗

Is the Multigrid Method Fault Tolerant? The Two-Grid Case

The predicted reduced resiliency of next-generation high performance computers means that it will become necessary to take into account the effects of randomly occurring faults on numerical methods. Further, in the event of a hard fault occurring, a decision has to be made as to what remedial action should be taken in order to resume the execution of the algorithm. The action that is chosen can have a dramatic effect on the performance and characteristics of the scheme. Ideally, the resulting algorithm should be subjected to the same kind of mathematical analysis that was applied to the original, deterministic variant. The purpose of this work is to provide an analysis of the behaviour of the multigrid algorithm in the presence of faults. Multigrid is arguably the method of choice for the solution of large-scale linear algebra problems arising from discretization of partial differential equations and it is of considerable importance to anticipate its behaviour on an exascale machine. The analysis of resilience of algorithms is in its infancy and the current work is perhaps the first to provide a mathematical model for faults and analyse the behaviour of a state-of-the-art algorithm under the model. It is shown that the Two Grid Method fails to be resilient to faults. Attention is then turned to identifying the minimal necessary remedial action required to restore the rate of convergence to that enjoyed by the ideal fault-free method.

97 MATHEMATICS AND COMPUTING↗

Probability Density Function Control of Frequency Fluctuations in Renewable-Rich Power Systems

The stochastic nature of renewable energy sources (RESs) necessitates treating power system frequency response as a random process with a nonstationary probability density function (PDF). Here, based upon the stochastic distribution control theory originated by the second author, this paper proposes a novel stochastic controller to improve the frequency PDF in power grids when integrating a large amount of RESs, thereby minimizing the effects of uncertainties and enhancing overall system stability. The key idea is to manipulate the controllable power generation resources so that the frequency PDF is make to follow a target PDF by using the stochastic distribution control theory originated by the second author. The proposed method can easily be plugged into existing automatic generation controls for multi-area transmission grids. The proposed method is validated via a modified Kundar's two area system and 240-bus Western Electricity Coordinating Council systems. The simulation results show that the proposed control shapes the frequency PDF narrower and sharper, leading to a notable improvement toward minimizing the effects of randomness and uncertainty during grid operation.

frequency↗