Search NASA⌕ Search

SEARCH · Search NASA

Results for “Random Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

On the neutrinoless double β{sup +}/EC decays

The neutrinoless double positron-emission/electron-capture (0νβ{sup +}/EC) decays are studied for the magnitudes of the involved nuclear matrix elements (NMEs). Decays to the ground state, 0{sub gs}{sup +}, and excited 0{sup +} states are discussed. The participant many-body wave functions are evaluated in the framework of the quasiparticle random-phase approximation (QRPA). Effective, G-matrix-derived nuclear forces are used in realistic single-particle model spaces. The channels β{sup +}β{sup +}, β{sup +}EC, and the resonant neutrinoless double electron capture (R0νECEC) are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of experimental methods for estimating matrix diffusion coefficients for contaminant transport modeling

Here, diffusion cell and diffusion wafer experiments were conducted to compare methods for estimating effective matrix diffusion coefficients in rock core samples from Pahute Mesa at the Nevada Nuclear Security Site (NNSS). A diffusion wafer method, in which a solute diffuses out of a rock matrix that is pre-saturated with water containing the solute, is presented as a simpler alternative to the traditional through-diffusion (diffusion cell) method. Both methods yielded estimates of effective matrix diffusion coefficients that were within the range of values previously reported for NNSS volcanic rocks. The difference between the estimates of the two methods ranged from 14 to 30%, and there was no systematic high or low bias of one method relative to the other. From a transport modeling perspective, these differences are relatively minor when one considers that other variables (e.g., fracture apertures, fracture spacings) influence matrix diffusion to a greater degree and tend to have greater uncertainty than effective matrix diffusion coefficients. For the same relative random errors in concentration measurements, the diffusion cell method yields effective matrix diffusion coefficient estimates that have less uncertainty than the wafer method. However, the wafer method is easier and less costly to implement and yields estimates more quickly, thus allowing a greater number of samples to be analyzed for the same cost and time. Given the relatively good agreement between the methods, and the lack of any apparent bias between the methods, the diffusion wafer method appears to offer advantages over the diffusion cell method if better statistical representation of a given set of rock samples is desired.

54 ENVIRONMENTAL SCIENCES↗

Significance of Low‐Velocity Zones on Solute Retention in Rough Fractures

Natural fractures are characterized by high internal heterogeneity. This internal variability is the cause of flow channeling, which in turn leads to contaminant transport taking place primarily along the high-velocity channels. Mass exchange between the high-velocity channels and the low-velocity zones has the potential to enhance contaminant retention, due to solute diffusion into the low-velocity zones and subsequent exposure to additional surface area for diffusion into the bordering rock matrix. Here, we derive a random walk particle tracking method for heterogeneous fractures, which includes an additional term to account for the aperture gradient. The method takes into account advection, diffusion in the fracture and matrix diffusion. The developed numerical framework is applied to assess the effect of low-velocity zones in rough self-affine fractures. The results show that diffusion into low-velocity zones has a visible but modest impact on contaminant retention. The magnitude of this impact does not change considerably, regardless of whether diffusion into the rock matrix is considered in the model, and increases for a decreasing average Péclet number of the fracture.

58 GEOSCIENCES↗

A Higher Harmonic Optimal Controller to Optimise Rotorcraft Aeromechanical Behaviour

Three methods to optimize rotorcraft aeromechanical behavior for those cases where the rotorcraft plant can be adequately represented by a linear model system matrix were identified and implemented in a stand-alone code. These methods determine the optimal control vector which minimizes the vibration metric subject to constraints at discrete time points, and differ from the commonly used non-optimal constraint penalty methods such as those employed by conventional controllers in that the constraints are handled as actual constraints to an optimization problem rather than as just additional terms in the performance index. The first method is to use a Non-linear Programming algorithm to solve the problem directly. The second method is to solve the full set of non-linear equations which define the necessary conditions for optimality. The third method is to solve each of the possible reduced sets of equations defining the necessary conditions for optimality when the constraints are pre-selected to be either active or inactive, and then to simply select the best solution. The effects of maneuvers and aeroelasticity on the systems matrix are modelled by using a pseudo-random pseudo-row-dependency scheme to define the systems matrix. Cases run to date indicate that the first method of solution is reliable, robust, and easiest to use, and that it was superior to the conventional controllers which were considered.

Leyland, Jane Anne↗

Light scattering by randomly oriented spheroidal particles

A study of the light scattering properties of randomly oriented, identical spheroidal particles is presented. A computation method was developed to integrate the Asano and Yamomoto solution (1975) for scattering from a homogeneous spheroid over all particle orientations; the extinction and scattering cross-sections, the asymmetry factor, and scattering matrix elements are calculated for randomly oriented prolate and oblate spheroids and compared with the calculations for spheres and laboratory measurements. The angular scattering behavior of spheroids is found to be different from that of the spheres for side scattering to backscattering directions, and prolate and oblate spheroids of the same shape parameter have similar angular scattering patterns.

Asano, S.↗

PCEMCAN - Probabilistic Ceramic Matrix Composites Analyzer: User's Guide, Version 1.0

PCEMCAN (Probabalistic CEramic Matrix Composites ANalyzer) is an integrated computer code developed at NASA Lewis Research Center that simulates uncertainties associated with the constituent properties, manufacturing process, and geometric parameters of fiber reinforced ceramic matrix composites and quantifies their random thermomechanical behavior. The PCEMCAN code can perform the deterministic as well as probabilistic analyses to predict thermomechanical properties. This User's guide details the step-by-step procedure to create input file and update/modify the material properties database required to run PCEMCAN computer code. An overview of the geometric conventions, micromechanical unit cell, nonlinear constitutive relationship and probabilistic simulation methodology is also provided in the manual. Fast probability integration as well as Monte-Carlo simulation methods are available for the uncertainty simulation. Various options available in the code to simulate probabilistic material properties and quantify sensitivity of the primitive random variables have been described. The description of deterministic as well as probabilistic results have been described using demonstration problems. For detailed theoretical description of deterministic and probabilistic analyses, the user is referred to the companion documents "Computational Simulation of Continuous Fiber-Reinforced Ceramic Matrix Composite Behavior," NASA TP-3602, 1996 and "Probabilistic Micromechanics and Macromechanics for Ceramic Matrix Composites", NASA TM 4766, June 1997.

Shah, Ashwin R.↗

Micromechanics-based Modeling of Laminated SiC/SiC Ceramic Matrix Composites

The behavior and response of ceramic matrix composites (CMCs), in particular silicon carbide fiber reinforced silicon carbide matrix (SiC/SiC), is affected by many factors such as variation of fiber volume fraction, residual stresses resulting from processing of the composites at high temperature, random microstructures, and the presence of matrix flaws (e.g., voids, pores, cracks etc.) as well as general material nonlinearity and heterogeneity that occurs randomly in a composite. Residual stresses arising from the phase change of constituents are evaluated in this paper and it is shown that they do influence composite strength and need to be properly accounted for. Additionally, the microstructures (location of fiber centers, coating thickness etc.) of advanced CMCs are usually disordered (or random) and fiber diameter and strength typically have a distribution. They rarely resemble the ordered fiber packing (square, rectangular, or hexagonal) that is generally assumed in micromechanics-based models with periodic boundary conditions for computational expediency. These issues raise the question of how should one model such systems effectively? Can an ordered hexagonal packed repeating unit cell (RUC) accurately represent the random microstructure behavior? How many fibers need to be included to enable accurate representation? Clearly, the number of fibers within an RUC must be limited to insure a balance between accuracy and efficiency. NASA’s in-house micromechanics-based code MAC/GMC provides a framework to analyze such RUCs for the overall composite behavior and the FEAMAC computer code provides linkage of MAC/GMC to the commercial FEA code, ABAQUS. The appropriate level of discretization of the RUC as well as the analysis method employed, i.e., Generalized Method of Cells (GMC) or High Fidelity Generalized Method of Cells (HFGMC), is investigated in this paper in the context of a unidirectional as well as a cross-ply laminated CMC. Results including effective composite properties, proportional limit stress (an important design parameter) and fatigue are shown utilizing both GMC as well as HFGMC. Finally, a few multiscale analyses are performed on smooth bar test coupons as well as test coupons with features such as open-hole and double notches using FEAMAC. Best practices and guidance are provided to take these phenomena into account and keep a proper balance between fidelity (accuracy) and efficiency. Following these guidelines can account for important physics of the problem and provide significant advantages when performing large multiscale composite structural analyses.

Ceramic Matrix Composites↗

Elastic and Piezoelectric Properties of Boron Nitride Nanotube Composites: Finite Element Model - Part II

This paper is the second part of a two-part series where the first part presents a molecular dynamics model of a single Boron Nitride Nanotube (BNNT) and this paper scales up to multiple BNNTs in a polymer matrix. This paper presents finite element (FE) models to investigate the effective elastic and piezoelectric properties of (BNNT) nanocomposites. The nanocomposites studied in this paper are thin films of polymer matrix with aligned co-planar BNNTs. The FE modelling approach provides a computationally efficient way to gain an understanding of the material properties. We examine several FE models to identify the most suitable models and investigate the effective properties with respect to the BNNT volume fraction and the number of nanotube walls. The FE models are constructed to represent aligned and randomly distributed BNNTs in a matrix of resin using 2D and 3D hollow and 3D filled cylinders. The homogenisation approach is employed to determine the overall elastic and piezoelectric constants for a range of volume fractions. These models are compared with an analytical model based on Mori-Tanaka formulation suitable for finite length cylindrical inclusions. The model applies to primarily single-wall BNNTs but is also extended to multi-wall BNNTs, for which preliminary results will be presented. Results from the Part 1 of this series can help to establish a constitutive relationship for input into the finite element model to enable the modeling of multiple BNNTs in a polymer matrix.

Kim, H. Alicia↗

Optimization of detection sensitivity for a Fiber Optic Intrusion Detection System (FOIDS) using design of experiments.

The Fiber Optic Intrusion Detection System (FOIDS)1 is a physical security sensor deployed on fence lines to detect climb or cut intrusions by adversaries. Calibration of detection sensitivity can be time consuming because, for example, the FiberSenSys FD-332 has 32 settings that can be adjusted independently to provide a balance between a high probability of detection and a low nuisance alarm rate. Therefore, an efficient method of calibrating the FOIDS in the field, other than by trial and error, was needed. This study was conducted to: x Identify the most significant settings for controlling detection x Develop a way of predicting detection sensitivity for given settings x Develop a set of optimal settings for validation The Design of Experiments (DoE) 2-4 methodology was used to generate small, planned test matrixes, which could be statistically analyzed to yield more information from the test data. Design of Experiments is a statistical methodology for quickly optimizing performance of systems with measurable input and output variables. DoE was used to design custom screening experiments based on 11 FOIDS settings believed to have the most affect on WKH types of fence perimeter intrusions were evaluated: simulated cut intrusions and actual climb intrusions. Two slightly different two-level randomized fractional factorial designed experiment matrixes consisting of 16 unique experiments were performed in the field for each type of intrusion. Three repetitions were conducted for every cut test; two repetitions were conducted for every climb test. Total number of cut tests analyzed was 51; the total number of climb tests was 38. This paper discusses the results and benefits of using Design of Experiments (DoE) to calibrate and optimize the settings for a FOIDS sensor

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Step-Cycle Mechanical Processing of Gels of sPP-b-EPR-b-sPP Triblock Copolymer in Mineral Oil

Gels of syndiotactic polypropylene-b-ethylene-propylene-rubber-b-syndiotactic polypropylene (sPP-EPR-sPP) were prepared by dissolving {approx}6 wt % of the triblock copolymer in mineral oil at 170 C and then cooling to room temperature in several steps to crystallize the sPP block. The gel was subjected to step-cycle processing by first extending it to a given maximum tensile strain, followed by decreasing the load to zero. The cycle was then repeated to a higher maximum strain and so on until the sample either failed or it reached an ultimate predetermined strain. The true stress and true strain {var_epsilon}{sub H} during each cycle were recorded, including the true strain at zero load {var_epsilon}{sub H,p} after each cycle that resulted from the plastic deformation of the sPP crystals in the gel. The initial Young's modulus E{sub init} and maximum tangent modulus E{sub max} in each cycle undergo dramatic changes as a function of {var_epsilon}{sub H,p}, with Einit decreasing for {var_epsilon}{sub H,p} {le} 0.1 and then increasing slowly as {var_epsilon}{sub H,p} increases to 1 while E{sub max} increases rapidly over the entire range of {var_epsilon}{sub H,p}, resulting in a ratio of E{sub max}/E{sub init} > 1000 at the highest maximum (nominal) strain of 20. On the basis of small-angle X-ray scattering patterns from the deformed and relaxed gels, as well as on previous results on deformation of semicrystalline random copolymers by Strobl and co-workers, we propose that the initial decrease in Einit with {var_epsilon}{sub H,p} is due to a breakup of the network of the original sPP crystal lamellae while the increase in E{sub max} with {var_epsilon}{sub H,p} is caused by the conversion of the sPP lamellae into fibrils of an aspect ratio that increases with further plastic deformation. The gel elastic properties can be understood as those of a short fiber composite with a highly deformable matrix. At zero stress the random copolymer midblock chains that connect the fibrils cause these to make all angles to the tensile axis (low E{sub init}) while at the maximum strain the stiff crystalline sPP fibrils align with the tensile axis producing a strong, relatively stiff gel.

36 MATERIALS SCIENCE↗

Microstructure of Al2O3 scales formed on NiCrAl alloys

The structure of transient scales formed on pure and Y or Zr-doped Ni-15Cr-13Al alloys oxidized for 0.1 hr at 1100 C was studied by the use of transmission electron microscopy. Crystallographically oriented scales were found on all three alloys, but especially for the Zr-doped NiCrAl. The oriented scales consisted of alpha-(Al,Cr)2O3, Ni(Al,Cr)2O4 and gamma-Al2O3. They were often found in intimate contact with each other such that the close-packed planes and directions of one oxide phase were aligned with those of another. The prominent structural features of the oriented scales were approximately equal to micrometer subgrains; voids, antiphase domain boundaries and aligned precipitates were also prevalent. Randomly oriented alpha-Al2O3 was also found and was the only oxide ever observed at the immediate oxide metal interface. These approximately 0.15 micrometer grains were populated by intragranular voids which decreased in size and number towards the oxide metal interface. A sequence of oxidation was proposed in which the composition of the growing scale changed from oriented oxides rich in Ni and Cr to oriented oxides rich in Al. At the same time the structure changed from cubic spinels to hexagonal corundums with apparent precipitates of one phase in the matrix of the other. Eventually randomly oriented pure alpha-Al2O3 formed as the stable oxide with an abrupt transition: there was no gradual loss of orientation, no gradual compositional change or no gradual decrease in precipitate density.

Smialek, J. L.↗

Self-Assembled Ordered Three-Phase Au-BaTiO 3 -ZnO Vertically Aligned Nanocomposites Achieved by a Templating Method

Complex multiphase nanocomposite designs present enormous opportunities for developing next-generation integrated photonic and electronic devices. Here, a unique three-phase nanostructure combining a ferroelectric BaTiO 3 , a wide-bandgap semiconductor of ZnO, and a plasmonic metal of Au toward multifunctionalities is demonstrated. By a novel two-step templated growth, a highly ordered Au–BaTiO 3 –ZnO nanocomposite in a unique “nanoman”-like form, i.e., self-assembled ZnO nanopillars and Au nanopillars in a BaTiO 3 matrix, is realized, and is very different from the random three-phase ones with randomly arranged Au nanoparticles and ZnO nanopillars in the BaTiO 3 matrix. The ordered three-phase “nanoman”-like structure provides unique functionalities such as obvious hyperbolic dispersion in the visible and near-infrared regime enabled by the highly anisotropic nanostructures compared to other random structures. Such a self-assembled and ordered three-phase nanocomposite is obtained through a combination of vapor–liquid–solid (VLS) and two-phase epitaxy growth mechanisms. In this study, we open up new possibilities in the design, growth, and application of multiphase structures and provides a new approach to engineer the ordering of complex nanocomposite systems with unprecedented control over electron–light–matter interactions at the nanoscale.

36 MATERIALS SCIENCE↗

A Classical-Quantum Hybrid Approach for Unsupervised Probabilistic Machine Learning

For training unsupervised probabilistic machine learning models, matrix computation and sample generation are the two key steps. While GPUs excel at matrix computation, they use pseudo-random numbers to generate samples. Contrarily, Adiabatic Quantum Processors (AQP) use quantum mechanical systems to generate samples accurately and quickly, but are not suited for matrix computation. We present a Classical-Quantum Hybrid Approach for training unsupervised probabilistic machine learning models, leveraging GPUs for matrix computations and the D-Wave quantum sampling library for sample generation. We compare this approach to classical and quantum approaches across four performance metrics. Our results indicate that while the hybrid approach–which uses one AQP and one GPU–outperforms quantum and one of the classical approaches, it performs comparably to the GPU approach, and is outperformed by the CPU approach, which uses 56 high-end CPUs. Lastly, we compare sampling on AQP versus sampling library and show that AQP performs better.

Date, Prasanna↗

Closed‐loop hierarchical control strategies for connected and autonomous hybrid electric vehicles with random errors

This study presents a closed‐loop hierarchical control strategy for a group of connected and autonomous hybrid electric vehicles (HEVs) with the purpose of optimising fuel economy while guaranteeing traffic mobility and vehicle safety. In the hierarchical control architecture, a decentralised stochastic model predictive control (SMPC)‐based higher level controller incorporating signal phase and timing information is formulated to optimise the velocity profile of each vehicle, and an adaptive equivalent consumption minimisation strategy based lower level controller is employed for the energy management control of the HEVs. Creatively, random errors of the control variable are considered in the SMPC framework. The errors are discretised and modelled as a Markov process and the state transition matrix of the errors is generated randomly to capture the error transition dynamics. To solve the SMPC problem more efficiently, a scenario‐based SMPC is employed. Moreover, the propulsion and recuperation efficiencies of the lower level controller are calculated at each time step with measurable variables, and fed back to the higher level controller for velocity optimisation in next time step. Simulation results validate the control effectiveness and advantages of the proposed control architecture.

Qiu, Shaolin↗

Physics-informed Machine Learning Method for Forecasting and Uncertainty Quantification of Partially Observed and Unobserved States in Power Grids

We present a physics-informed Gaussian Process Regression (GPR) model to predict the phase angle, angular speed, and wind mechanical power from a limited number of measurements. In the traditional data-driven GPR method, the form of the Gaussian Process covariance matrix is assumed and its parameters are found from measurements. In the physics-informed GPR, we treat unknown variables (including wind speed and mechanical power) as a random process and compute the covariance matrix from the resulting stochastic power grid equations. We demonstrate that the physics-informed GPR method is significantly more accurate than the standard data-driven one for immediate forecasting of generators' angular velocity and phase angle. We also show that the physics-informed GPR provides accurate predictions of the unobserved wind mechanical power, phase angle, or angular velocity when measurements from only one of these variables are available. The immediate forecast of observed variables and predictions of unobserved variables can be used for effectively managing power grids (electricity market clearing, regulation actions) and early detection of abnormal behavior and faults. The physics-based GPR forecast time horizon depends on the combination of input (wind power, load, etc.) correlation time and characteristic (relaxation) time of the power grid and can be extended to short and medium-range times.

machine learning, power grid, forecasting, Gaussia↗

Thermal and Mechanical Properties of CO{sub 2}-Based Biodegradable Poly(cyclohexene carbonate)/Organically Modified Layered Zinc Phenylphosphonate Nanocomposites

A new sustainable composite material was fabricated using CO{sub 2}-based poly(cyclohexene carbonate) (PCHC) and organically modified layered zinc phenylphosphonate (m-PPZn) via a solution mixing process. Analysis by wide-angle X-ray diffraction (WAXD) showed that the interlayer spacing of the m-PPZn was enlarged to 30.4 Å. The morphology of the PCHC/m-PPZn nanocomposites was characterized by transmission electron microscopy and WAXD, which revealed that the layered materials were partially delaminated and randomly dispersed in the PCHC matrix. The enhancement of the dynamic mechanical properties of the 1 wt% PCHC/m-PPZn nanocomposite at 80 °C was approximately 114% relative to those of the neat PCHC matrix. The thermal properties of the PCHC/m-PPZn nanocomposites characterized using thermogravimetric analysis were substantially improved upon incorporation of m-PPZn. With the addition of 0.25 wt% m-PPZn into the PCHC matrix, the decomposition temperature associated with 10 wt% loss of the nanocomposites was substantially increased by approximately 24 °C compared with that of the PCHC matrix. The isothermal degradation data demonstrated that the activation energy of the composites was higher than that of the PCHC. This finding was attributed to the addition of m-PPZn to PCHC increasing the thermal energy required for degradation, thus inducing a reduction in the degradation rate and an increase in the residual weight for the PCHC/m-PPZn nanocomposites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Diffusion behaviors between metallic fuel alloys with Pd addition and Fe

Fission product lanthanides (Lns) in metallic fuel is the primary cause of fuel-cladding chemical interaction (FCCI). Palladium (Pd) is being explored as a potential additive to reduce or mitigate FCCI by forming stable Pd-Ln compounds. The current study is an investigation of diffusion behaviors between UZrPd, UZrPdLn, UPuZrPd, and UPuZrPdLn alloys (Ln = 53Nd-25Ce-16Pr-6La wt. %) and iron (Fe). Diffusion couple tests were performed followed by microstructural analysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It is found that the diffusion of Fe into the fuel is reduced by PdZr2 precipitates randomly dispersed throughout the fuel matrix. Ln-Pd compounds form in UZrPdLn alloys, and (Ln,Pu)Pd forms in the UPuZrPdLn alloy. In both diffusion couples with Ln, small amounts of Lns are diffusing into the Fe. This could be due to small amounts of dissolved Lns in the precipitates, or could be due to the Ln-Pd compounds decomposing. In either case, diffusion caused by Lns is greatly reduced.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗