Search NASA⌕ Search

SEARCH · Search NASA

Results for “Random dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Dynamic Snap-Through of Thermally Buckled Structures by a Reduced Order Method

The goal of this investigation is to further develop nonlinear modal numerical simulation methods for application to geometrically nonlinear response of structures exposed to combined high intensity random pressure fluctuations and thermal loadings. The study is conducted on a flat aluminum beam, which permits a comparison of results obtained by a reduced-order analysis with those obtained from a numerically intensive simulation in physical degrees-of-freedom. A uniformly distributed thermal loading is first applied to investigate the dynamic instability associated with thermal buckling. A uniformly distributed random loading is added to investigate the combined thermal-acoustic response. In the latter case, three types of response characteristics are considered, namely: (i) small amplitude vibration around one of the two stable buckling equilibrium positions, (ii) intermittent snap-through response between the two equilibrium positions, and (iii) persistent snap-through response between the two equilibrium positions. For the reduced-order analysis, four categories of modal basis functions are identified including those having symmetric transverse, anti-symmetric transverse, symmetric in-plane, and anti-symmetric in-plane displacements. The effect of basis selection on the quality of results is investigated for the dynamic thermal buckling and combined thermal-acoustic response. It is found that despite symmetric geometry, loading, and boundary conditions, the anti-symmetric transverse and symmetric in-plane modes must be included in the basis as they participate in the snap-through behavior.

Przekop, Adam↗
NASA NTRS1999

Prediction of X-33 Engine Dynamic Environments

Rocket engines normally have two primary sources of dynamic excitation. The first source is the injector and the combustion chambers that generate wide band random vibration. The second source is the turbopumps, which produce lower levels of wide band random vibration as well as sinusoidal vibration at frequencies related to the rotating speed and multiples thereof. Additionally, the pressure fluctuations due to flow turbulence and acoustics represent secondary sources of excitation. During the development stage, in order to design/size the rocket engine components, the local dynamic environments as well as dynamic interface loads have to be defined.

Shi, John J.↗
NASA NTRS1963

On the use of dynamic models for studying launch vehicle buffet and ground-wind loads

The complex nature of the random aerodynamic input forces associated with transonic buffet and ground winds leads to difficulty in analytical treatment of the response of launch vehicles to these important loading conditions. The application of aeroelastically scaled models in the wind tunnel as a mechanical analog of the matharnatically complex problem requiring solution is described. Scaling relationships involved in this approach are developed and some checks on their validity are presented. Model design and support techniques are discussed, and some typical results given. Some problems arising from the increased size of launch vehicles are discussed.

Perry W. Hanson↗
NASA NTRS1981

Parametric Analytical Studies for the Nonlinear Dynamic Response of the Tile/Pad Space Shuttle Thermal Protection System

The studies examined for imposed sinusoidal and random motions of the shuttle skin and/or applied tile pressure. Studies are performed using the computer code DYNOTA which takes into account the highly nonlinear stiffening hysteresis and viscous behavior of the pad joining the tile to the shuttle skin. Where available, experimental data are used to confirm the validity of the analysis. Both analytical and experimental studies reveal that the system resonant frequency is very high for low amplitude oscillations but decreases rapidly to a minimum value with increasing amplitude.

Edighoffer, H.↗
NASA NTRS1990

The simulation of fluid dynamic uncertainties in the SSME turbopump

The aerodynamic uncertainties in the reusable rocket engine turbopumps due to randomness in their cryogenic environment are investigated. The probabilistic simulation of the turbopumps' aerodynamic response was accomplished using the panel method coupled with Fast Probability Integration methods. The results are presented for the probabilistic rotor blades and splitter loading and their sensitivity to specified flow coefficient and rotor preswirl variance.

Hamed, Awatef↗
NASA NTRS2006

Dynamic Snap-Through of Thin-Walled Structures by a Reduced Order Method

The goal of this investigation is to further develop nonlinear modal numerical simulation methods for application to geometrically nonlinear response of structures exposed to combined high intensity random pressure fluctuations and thermal loadings. The study is conducted on a flat aluminum beam, which permits a comparison of results obtained by a reduced-order analysis with those obtained from a numerically intensive simulation in physical degrees-of-freedom. A uniformly distributed thermal loading is first applied to investigate the dynamic instability associated with thermal buckling. A uniformly distributed random loading is added to investigate the combined thermal-acoustic response. In the latter case, three types of response characteristics are considered, namely: (i) small amplitude vibration around one of the two stable buckling equilibrium positions, (ii) intermittent snap-through response between the two equilibrium positions, and (iii) persistent snap-through response between the two equilibrium positions. For the reduced order analysis, four categories of modal basis functions are identified including those having symmetric transverse (ST), anti-symmetric transverse (AT), symmetric in-plane (SI), and anti-symmetric in-plane (AI) displacements. The effect of basis selection on the quality of results is investigated for the dynamic thermal buckling and combined thermal-acoustic response. It is found that despite symmetric geometry, loading, and boundary conditions, the AT and SI modes must be included in the basis as they participate in the snap-through behavior.

Przekop, Adam↗
DOE OSTI2025

Material Fracturing and Failure Simulation Datasets

Fracturing is a fundamental physics phenomena with broad relevance across multiple domains, ranging from infrastructure integrity, aerospace durability, reservoir production, and seismic events. We present a diverse dataset of simulated fracture evolution and material failure generated from two numerical solvers: the phase-field method and the combined finite-discrete element method (FDEM). These solvers differ in formulation, physical fidelity, and computational efficiency. The dataset includes five materials: PBX, anisotropic shale, tungsten, aluminum, and steel. For each, phase-field simulations span 400,000 cases: 200,000 under uniaxial tension and 200,000 under biaxial tension. The computationally expensive FDEM simulations include 90,000 split evenly among PBX, shale, and tungsten under uniaxial loading. All simulations begin with randomized initial fracture patterns. Each entry includes temporal data capturing fracture propagation dynamics. This comprehensive dataset is designed to support the development of foundational or surrogate machine learning approaches for predicting material failure. While no such models are introduced here, the dataset lays a robust foundation for advancing future research and innovation in these areas.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantum algorithm to simulate Lindblad master equations

We present a quantum algorithm for simulating a family of Markovian master equations that can be realized through a probabilistic application of unitary channels and state preparation. Our approach employs a second-order product formula for the Lindblad master equation, achieved by decomposing the dynamics into dissipative and Hamiltonian components and replacing the dissipative segments with randomly compiled, easily implementable elements. The sampling approach eliminates the need for ancillary qubits to simulate the dissipation process and reduces the gate complexity in terms of the number of jump operators. We provide a rigorous performance analysis of the algorithm. We also extend the algorithm to time-dependent Lindblad equations, generalize the family of Markovian master equations it can be applied to, and explore applications beyond the Markovian noise model. A new error bound, in terms of the diamond norm, for second-order product formulas for time-dependent Liouvillians is provided that might be of independent interest. Published by the American Physical Society 2025

Borras, Evan (ORCID:000900017709037X)↗
NASA NTRS1977

Impact cratering and regolith dynamics

The most recent models concerning mechanical aspects of lunar regolith dynamics related to impact cratering use probabilistic approaches to account for the randomness of the meteorite environment in both space and time. Accordingly the absolute regolith thickness is strictly a function of total bombardment intensity and absolute regolith growth rate in nonlinear through geologic time. Regoliths of increasing median thickness will have larger and larger proportions of more and more deep seated materials. An especially active zone of reworking on the lunar surface of about 1 mm depth has been established. With increasing depth, the probability of excavation and regolith turnover decreases very rapidly. Thus small scale stratigraphy - observable in lunar core materials - is perfectly compatible with regolith gardening, though it is also demonstrated that any such stratigraphy does not necessarily present a complete record of the regolith's depositional history. At present, the lifetimes of exposed lunar rocks against comminution by impact processes can be modeled; it appears that catastrophic rupture dominates over single particle abrasion.

Hoerz, F.↗
NASA NTRS1982

An optimal control approach to the design of moving flight simulators

An abstract flight simulator design problem is formulated in the form of an optimal control problem, which is solved for the linear-quadratic-Gaussian special case using a mathematical model of the vestibular organs. The optimization criterion used is the mean-square difference between the physiological outputs of the vestibular organs of the pilot in the aircraft and the pilot in the simulator. The dynamical equations are linearized, and the output signal is modeled as a random process with rational power spectral density. The method described yields the optimal structure of the simulator's motion generator, or 'washout filter'. A two-degree-of-freedom flight simulator design, including single output simulations, is presented.

Sivan, R.↗
NASA NTRS2002

Structural Acoustic Response of a Shape Memory Alloy Hybrid Composite Panel (Lessons Learned)

This study presents results from an effort to fabricate a shape memory alloy hybrid composite (SMAHC) panel specimen and test the structure for dynamic response and noise transmission characteristics under the action of thermal and random acoustic loads. A method for fabricating a SMAHC laminate with bi-directional SMA reinforcement is described. Glass-epoxy unidirectional prepreg tape and Nitinol ribbon comprise the material system. Thermal activation of the Nitinol actuators was achieved through resistive heating. The experimental hardware required for mechanical support of the panel/actuators and for establishing convenient electrical connectivity to the actuators is presented. Other experimental apparatus necessary for controlling the panel temperature and acquiring structural acoustic data are also described. Deficiency in the thermal control system was discovered in the process of performing the elevated temperature tests. Discussion of the experimental results focuses on determining the causes for the deficiency and establishing means for rectifying the problem.

Turner, Travis L.↗
NASA NTRS2002

The Meteoritic Component in Impact Deposits

An important part of the history of impacts on Earth, and their influence on the terrestrial environment and biotic evolution, is the provenance of the impacting bolides. This will reflect the history of the large-body object flux in the inner solar system. The physical and chemical properties of projectiles, as well as their orbital evolution, has influenced the dynamics and the relative timing of impact events. Possible impact scenarios include random impacts by individual asteroids or comets, or clusters of impacts due to major collisions in the asteroid or Kuiper belts, or large perturbations of the Oort cloud of comets. Over the last several years, a combination of trace element, isotopic, and petrologic data have yielded significant insights into this impact history. The trace element chemistry of sediments, in particular the concentration of siderophiles (e.g., Ir), is a useful tool to detect impacts and provides supporting evidence for suspected impact deposits. However, siderophiles are not especially useful in distinguishing between types of projectiles. Interelement abundances of PGEs can distinguish a chondritic signature, but since most asteroids, and probably all comets are chondritic, these data do little to distinguish between chondritic source materials. Perhaps the most significant chemical argument used to constrain provenance, is that the total amount of Ir in the global Cretaceous-Tertiary (KT) boundary ejecta layer is considerably less than that expected by a low-velocity, 10 km asteroid impact and is most consistent with the impact of a high-velocity, low-Ir comet. Alternatively, much of the Ir may have been buried in the Chicxulub crater and/or ejected to escape velocity.

Kyte, Frank T.↗
NASA NTRS2010

Physical Invariants of Intelligence

A program of research is dedicated to development of a mathematical formalism that could provide, among other things, means by which living systems could be distinguished from non-living ones. A major issue that arises in this research is the following question: What invariants of mathematical models of the physics of systems are (1) characteristic of the behaviors of intelligent living systems and (2) do not depend on specific features of material compositions heretofore considered to be characteristic of life? This research at earlier stages has been reported, albeit from different perspectives, in numerous previous NASA Tech Briefs articles. To recapitulate: One of the main underlying ideas is to extend the application of physical first principles to the behaviors of living systems. Mathematical models of motor dynamics are used to simulate the observable physical behaviors of systems or objects of interest, and models of mental dynamics are used to represent the evolution of the corresponding knowledge bases. For a given system, the knowledge base is modeled in the form of probability distributions and the mental dynamics is represented by models of the evolution of the probability densities or, equivalently, models of flows of information. At the time of reporting the information for this article, the focus of this research was upon the following aspects of the formalism: Intelligence is considered to be a means by which a living system preserves itself and improves its ability to survive and is further considered to manifest itself in feedback from the mental dynamics to the motor dynamics. Because of the feedback from the mental dynamics, the motor dynamics attains quantum-like properties: The trajectory of the physical aspect of the system in the space of dynamical variables splits into a family of different trajectories, and each of those trajectories can be chosen with a probability prescribed by the mental dynamics. From a slightly different perspective, the mechanism of decision-making is feedback from the mental dynamics to the motor dynamics, and this mechanism provides a quantum-like collapse of a random motion into an appropriate deterministic state, such that entropy undergoes a pronounced decrease. The existence of this mechanism is considered to be an invariant of intelligent behavior of living systems, regardless of the origins and material compositions of the systems.

Zak, Michail↗
NASA NTRS2021

Maya Forest Water Resources II: Mapping Inundation Below the Forest Canopy in the Maya Tri-National Forest

To monitor seasonal flooding within the tri-National Maya Forest the team completed the methodology started by the Summer 2021 term to analyze changes in inundation dynamic throughout 2017. The team analyzed inundation dynamics in Google Earth Engine (GEE) using Earth observation products from the Landsat 8 Operational Land Imager (OLI), Advanced Land Observing Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR) 2, and International Space Station (ISS) Global Ecosystem Dynamics Investigation LiDAR (GEDI). The team improved the landcover classification using the Random Forest algorithm in GEE by adding canopy height data derived from GEDI, elevation and slope data from Copernicus, and additional multi-spectral band ratios from Landsat 8. The pixel-based land cover classification produced an overall accuracy of 88%. Experiments measuring inundation extent using L-band SAR included comparing results with a priori knowledge, topography datasets, and auxiliary datasets. We iteratively tested and found threshold values for identifying forested inundation using the ratio for HH divided by HV. The resulting methodology and products helped end users from Belize’s Land Information Center (LIC) and Forest Department, Guatemala’s Center for Monitoring and Evaluation (CEMEC), and Mexico’s El Colegio de la Frontera Sur (ECOSUR) manage land and water resources and protect communities.

Stephanie Jiménez↗
NASA NTRSDate not supplied

Mapping National Forest Aboveground Biomass in Mexico By Integrating GEDI and Landsat Times Series Data

Mexico is one of the countries with great potential for the UN's Reducing Emissions from Deforestation and Forest Degradation (REDD+) program, a key nature-based solution for the forest sector. To monitor carbon stock changes, there is a growing demand for unbiased Monitoring Reporting Verification (MRV) systems to facilitate effective forest management and climate change mitigation strategies. Remote sensing-based national aboveground biomass density (AGBD) estimation over Mexico is scarce and often limited to one-time static mapping, leading to spatiotemporal inconsistency in inputs. As an effort under NASA's Carbon Monitoring System (CMS) program, we have developed a remote sensing-based approach to create consistent historical AGBD maps of Mexico using multi-stream remote sensing data, including spaceborne lidar GEDI and long-term Landsat time series, as well as topographic information. We employ the continuous change detection and classification (CCDC) algorithm for temporal modeling of Landsat surface reflectance, followed by the inference of forest AGBD using a random forest machine learning algorithm with the temporal information of land surface dynamics extracted by the CCDC as input. GEDI provides unprecedented forest structure and AGBD sampling datasets for model training and validation practices. In this presentation, we share the progress made in developing a spatially explicit mapping of historical AGBD changes associated with land surface changes and post-disturbance landscapes.

Taejin Park↗
DOE OSTI2025

Multiphase computational fluid dynamics modeling of reacting flows in absorption columns for carbon capture

First-principles derived computational fluid dynamics (CFD) simulations have been proposed as a fundamental tool for investigating solvent-based CO 2 absorption in packed columns due to their ability to accurately represent the underlying nonlinear, multiscale dynamics. Numerous studies have previously utilized such CFD simulations to investigate hydrodynamics of columns with structured and random packings by assessing the key hydrodynamic metrics such as the interfacial and wetted areas. While mapping such metrics for different conditions is essential to the optimization of absorption columns, it is not sufficient, as the CO 2 capture rate depends also on the coupled, nonlinear dynamics from the underlying chemical reaction kinetics, thermodynamics, and heat-transfer rates. In this work, we present detailed CFD simulation results augmented by incorporating the effects of interfacial physical mass transfer of CO 2 , heat release from chemical reaction kinetics, and thermophysical property variations from resulting temperature gradients. We demonstrate the applicability of the proposed approach in numerically assessing the performance of packed columns by evaluating key hydrodynamic quantities, CO 2 absorption rates, and temperature rise in a reference column with packings that are structurally similar to the Sulzer Mellapak™ 250.Y packing, for different solvent inflow velocities and temperatures. Predictions from simulation results are found to be consistent with the trends in experimental observations from the literature, suggesting that the predictive capabilities of the simulation framework can be leveraged to guide the future development of absorber-column designs and optimized process flowsheets.

Absorption columns↗
NASA NTRS2013

Deleterious Thermal Effects Due To Randomized Flow Paths in Pebble Bed, and Particle Bed Style Reactors

A review of literature associated with Pebble Bed and Particle Bed reactor core research has revealed a systemic problem inherent to reactor core concepts which utilize randomized rather than structured coolant channel flow paths. For both the Pebble Bed and Particle Bed Reactor designs; case studies reveal that for indeterminate reasons, regions within the core would suffer from excessive heating leading to thermal runaway and localized fuel melting. A thermal Computational Fluid Dynamics model was utilized to verify that In both the Pebble Bed and Particle Bed Reactor concepts randomized coolant channel pathways combined with localized high temperature regions would work together to resist the flow of coolant diverting it away from where it is needed the most to cooler less resistive pathways where it is needed the least. In other words given the choice via randomized coolant pathways the reactor coolant will take the path of least resistance, and hot zones offer the highest resistance. Having identified the relationship between randomized coolant channel pathways and localized fuel melting it is now safe to assume that other reactor concepts that utilize randomized coolant pathways such as the foam core reactor are also susceptible to this phenomenon.

Moran, Robert P.↗