Search NASA⌕ Search

SEARCH · Search NASA

Results for “Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Rate and time dependent failure of structural adhesives

Studies on two adhesives (Metlbond 1113 and 1113-2) identified as having important applications in the bonding of composite materials are presented. A testing program to ascertain stress-strain, strain-rate, time, yield, and/or failure behavior of these materials in bulk form using uniaxial tensile constant strain-rate, creep, and relaxation tests is described. The stress-strain behavior of each material is shown to be significantly rate dependent. A rate dependent stress whitening (crazing) phenomenon occurs prior to either yield or fracture. A region of linear elasticity, a region of viscoelasticity, and the onset of yielding are identified in the stress-strain behavior. The linear elastic limit and the yield point are shown to be rate dependent and agree well with an empirical equation proposed by Ludwik. A creep to failure phenomenon is shown to exist and is correlated with a delayed yield equation proposed by Crochet. Analytical predictions based on a modified Bingham model are shown to agree well with experimental stress-strain strain-rate data. Analytical predictions based on a modified Ramberg-Osgood equation are also shown for comparison purposes.

Brinson, H. F.↗
NASA NTRS1976

The influence of growth rate and temperature on high cycle fatigue of Al-Al3Ni

High-cycle fatigue tests have been conducted on specimens of an Al-Al3Ni eutectic alloy, unidirectionally solidified at selected rates from 0.000139 to 0.3 cm/sec. Tests were conducted in air at 298, 458 and 683 K. Room temperature fatigue lives were independent of growth rate at low solidification rates but were markedly improved in samples grown at 0.3 cm/sec. Materials grown at 0.00833 cm/sec exhibited fatigue lives similar to those of the lower growth rates, despite gross misalignment due to cellular growth. The dependence of fatigue life on growth rate at elevated temperatures appears to be due primarily to differences in cyclic creep rates as a result of varying interfiber spacings. Crack initiation and propagation mechanisms were established by metallographic and fractographic examination. Dislocation substructure-fiber interactions were studied by transmission electron microscopy.

Maurer, G. E.↗
NASA NTRS1977

Solar influence on meteor rates and atmospheric density variations at meteor heights

Lindblad (1967) has concluded that there was an inverse relation between meteor rates and the solar cycle brought about by an increase in atmospheric density gradient at the height of meteor ionization. The present paper investigates Lindblad's conclusion more fully by using three long series of continuous radar meteor data from New Zealand and Canada. The results confirm a clear variation of total rate from year to year, inversely correlated with the annual sunspot number. Although meteor rates call for a density gradient variation inversely related to the solar cycle, direct evidence for such a variation remains nonexistant. Possibly the effect is being obscured by other density changes occurring at these heights. Analysis of meteor rates within the same one-year period in the two hemispheres has established that seasonal rate changes brought about by the variation of the angle between the latitude of the observing station and the apex of the earth's way override change of density gradient in at least one of the hemispheres and possibly both in controlling meteor rates within the year.

Ellyett, C.↗
NASA NTRS1978

Cooling rates of group IVA iron meteorites

Cooling rates of six group IVA iron meteorites were estimated by a taenite central Ni concentration-taenite half-width method. Calculated cooling rates range from 13 to 25 C/Myr, with an average of 20 C/Myr. No correlation between cooling rate and bulk Ni content is observed, and the data appear to be consistent with a uniform cooling rate as expected from an igneous core origin. This result differs from previous studies reporting a wide range in cooling rates that were strongly correlated with bulk Ni content. The differences result mainly from differences in the phase diagram and the selected diffusion coefficients. Cooling rates inferred from taenite Ni concentrations at the interface with kamacite are consistent with those based on taenite central Ni content.

Willis, J.↗
NASA NTRS1978

Testing of fiber composites at high strain rates

An experimental investigation was conducted to determine strain rate effects in fiber composites. Unidirectional composite specimens of boron/epoxy, graphite/epoxy, S-glass/epoxy and Kevlar/epoxy were tested at tensile strain rates of up to 27 m/m/sec. Longitudinal, transverse and in-plane shear properties, including modulus, Poisson's ratio, strength and ultimate strain, were determined by testing 0-, 90and 10-degree unidirectional coupons. Strains were measured by means of strain gages bonded on the coupons and loads were measured by means of a strain gage load cell. All specimens were loaded in an electrohydraulic loading system. The 0-degree properties which are governed by the fibers do not vary much with strain rate except for the Kevlar/epoxy material which shows an increase in both modulus and strength. The strain rate effects on 90-degree properties were small with a general trend toward higher strength with increasing strain rate. The most noticeable effect was on in-plane shear properties with shear strength values at high strain rates approximately fifteen percent higher than static values.

Daniel, I. M.↗
NASA NTRS1979

Refinement of the aeronomically determined rate coefficient for the reaction of N2/+/ with O

An earlier aeronomic determination of the rate coefficient for the reaction N2(+) + O yields NO(+) + N using Atmosphere Explorer data indicated a small increase in the rate coefficient with ion temperature, contrary to laboratory observations. This was incorrectly attributed to neglect of an increase in the N2(+) recombination rate with vibrational excitation. Recent aeronomical results have shown that the rate coefficient for charge exchange of O(+)(2D) with N2 is about an order of magnitude smaller at thermal temperatures than at energies greater than 0.5 eV (i.e., energies at which laboratory measurements have been made). It is shown that the use of the smaller charge exchange rate coefficient coupled with recent results on N2 quenching of O(+)(2D) yields a temperature dependence in excellent agreement with the laboratory results for the rate coefficient.

Torr, D. G.↗
NASA NTRS1980

The equatorial rotation rate of the supergranulation cells

The equatorial rotation rate of the supergranulation cells has been observed to be 14.72 plus or minus 0.07 deg/day. Velocity patterns observed at different times are cross-correlated to derive the rotation rate. The observed rate is 3% faster than recent observations of the surface rotation rate by Doppler shifts. The difference between the cell rate and surface rate is consistent with a model of the supergranular convection in which angular momentum per unit mass is conserved in the radial flow (Foukal, 1977).

Duvall, T. L., Jr.↗
NASA NTRS1980

Predicted and measured effects of pressure and crossflow velocity on composite propellant burning rate

A theoretical model for prediction of burning rates of composite (ammonium perchlorate oxidizer) solid propellants as a function of pressure and crossflow velocity was developed. Included in this model is the capability for treatment of multimodal oxidizer particle sizes and metalized formulations. In addition, an experimental device for measuring the effects of crossflow velocity on propellant burning rate was developed and used to characterize a series of AP/HTPB propellants with systematically varied formulation parameters. Model predictions of zero-crossflow burning rate versus pressure characteristics were found to be in agreement with data, while the agreement between erosive burning predictions and data is, in general, good. The experimental data indicate that the dominant factor influencing the sensitivity of composite propellant burning rate to crossflow is the base (no-crossflow) burning rate versus pressure characteristics of the propellant (lower base burning rate leading to increased crossflow sensitivity). Finally, the model was used to examine the effects of motor scaling on erosive burning: erosive burning is predicted to diminish with increasing motor size, in agreement with experience.

King, M. K.↗
NASA NTRS1981

Solidification zoning and metallographic cooling rates of chondrites

The cooling rates of chondrites have been determined according to the cooling rate method of Wood (1967) which involves the measurement of the concentration of nickel in the interiors of taenite grains of various sizes. The present paper presents an investigation of the effect of zoning produced during solidification on the use of the Wood method. Cooling rate curves were obtained in a computer simulation based on a model of kamacite formation on the outer edge of a taenite sphere of uniform initial composition, followed by the inward radial progression of the kamacite-taenite interface. When a concentration gradient produced by solidification is present in the initial conditions, deviations from the cooling rate curves for uniform 10% Ni are obtained only at cooling rates greater than 1000 K/million years, which would result in an overestimation of the cooling rates based on observed Ni gradients in grains of radius greater than 20 microns.

Willis, J.↗
NASA NTRS1981

The effect of temperature fluctuations of reaction rate constants in turbulent reacting flows

Current models of turbulent reacting flows frequently use Arrhenius reaction rate constants obtained from static or laminar flow theory and/or experiments, or from best fits of static, laminar, and turbulent data. By treating the reaction rate constant as a continuous random variable which is temperature-dependent, the present study assesses the effect of turbulent temperature fluctuations on the reaction rate constant. This model requires that a probability density function (PDF) describing the nature of the fluctuations be specified. Three PDFs are examined: the clipped Gaussian, the beta PDF, and the ramp model. All the models indicate that the reaction rate constant is greater in a turbulent flow field than in an equivalent laminar flow. In addition, an amplification ratio, which is the ratio of the turbulent rate constant to the laminar rate constant, is defined and its behavior as a function of the mean temperature fluctuations is described

Chinitz, W.↗
NASA NTRS1982

An estimation of the condensation rates in three severe storm systems from satellite observations of the convective mass flux

A technique was developed for estimating the condensation rates of convective storms using satellite measurements of cirrus anvil expansion rates and radiosonde measurements of environmental water vapor. Three cases of severe convection in Oklahoma were studied and a diagnostic model was developed for integrating radiosonde data with satellite data. Two methods were used to measure the anvil expansion rates - the expansion of isotherm contours on infrared images, and the divergent motions of small brightness anomalies tracked on the visible images. The differences between the two methods were large as the storms developed, but these differences became small in the latter stage of all three storms. A comparison between the three storms indicated that the available moisture in the lowest levels greatly affected the rain rates of the storms. This was evident from both the measured rain rates of the storms and the condensation rates estimated by the model. The possibility of using this diagnostic model for estimating the intensities of convective storms also is discussed.

Mack, R. A.↗
NASA NTRS1982

Response of MnBi-Bi eutectic to freezing rate changes

Reference is made to a study by Fu and Wilcox (1981), which treated theoretically the influence on freezing rate of sudden changes in translation rate in the Bridgman-Stockbarger technique. This treatment is extended here to a linear ramped translation rate and an oscillatory freezing rate. It is found that oscillations above a few hertz are highly damped in small-diameter apparatus. An experimental test is carried out of the theoretical predictions for a sudden change of translation rate. The MnBi-Bi eutectic is solidified with current-induced interface demarcation. The experimental results accord reasonably well with theory if the silica ampoule wall is assumed to either (1) contribute only a resistance to heat exchange between the sample and the furnace wall or (2) transmit heat effectively in the axial direction by radiation. In an attempt to explain the fact that a finer microstructure is obtained in space, MnBi-Bi microstructure is determined when the freezing rate is increased or decreased rapidly. Preliminary results suggest that fiber branching does not occur as readily as fiber termination.

Nair, M.↗
NASA NTRS1982

Antioxidants, metabolic rate and aging in Drosophila

The metabolic rate-of-living theory of aging was investigated by determining the effect of several life-prolonging antioxidants on the metabolic rate and life span of Drosophila. The respiration rate of groups of continuously agitated flies was determined in a Gilson respirometer. Vitamin E, 2,4-dinitrophenol, nordihydroguaiaretic acid, and thiazolidine carboxylic acid were employed as antioxidants. Results show that all of these antioxidants reduced the oxygen consumption rate and increased the mean life span, and a significant negative linear correlation was found between the mean life span and the metabolic rate. It is concluded that these findings indicate that some antioxidants may inhibit respiration rate in addition to their protective effect against free radical-induced cellular damage.

Miquel, J.↗
NASA NTRS1983

Electron collisional rate coefficients for low-level transitions in hydrogen

There exists presently no general agreement concerning the collisional excitation rates of atomic hydrogen. The present investigation is concerned with the results reported by various investigators, taking into account the semiempirical rates of Johnson (1972), a study conducted by Aggarwal (1983), empirically based rates of Crandall et al. (1974), and the rates tabulated in Osterbrock (1974), based on the close-coupling calculations of Burke et al. (1967). It is found that there is a major conflict between the 'best' theoretical and Johnson values on the one hand, and the empirical data on the other. A study of the data shows that the Johnson value for the 1 to 2 rate agrees well with other theoretical calculations, and within 25 percent of empirical measurements, but that the Johnson 1 to 3 rate is 40-75 percent of the 'best' theoretical calculations.

Drake, S. A.↗
NASA NTRS1984

Gravity, body mass and composition, and metabolic rate

The scale effects of increased gravitational loading by chronic centrifugation on metabolic rate and body composition in metabolically mature mammals were investigated. Individual oxygen consumption rates in groups of 12 each, 8-month-old, hamster, rats, guinea pigs, and rabbits were measured at weekly intervals at 1.0 g, then 2.0 g for 6 weeks. Metabolic rate was increased significantly in all species, and stabilized after 2 weeks at 2.0 g. Statistical analysis of the data revealed that the larger the animal the greater was the increase in mass-specific metabolic rate, or metabolic intensity, over the 1.0 g value for the same animal, with the result that the interspecies allometric scaling relationship between metabolic rate and total body mass is different at 2.0 g compared 10 1.0 g. Analysis of covariance shows that the postioning constant at 2.0 g is increased by 17% at 2.0 g at the P .001 level, and the exponent is increased by 8% at the P = 0.008 level. Thus, the hypothesis that augmented gravitational loading should shift the allometric relationship between metabolic rate and body size by an increase in both parameters is supported.

Pace, N.↗
NASA NTRS1984

The Effect of Solidification Rate on Morphological Stability

At low solidification rates, the criterion for the onset of morphological instability parallels closely the criterion of constitutional supercooling. At somewhat larger rates of solidification, however, the results of the perturbation theory of morphological instability differ significantly from the predictions of constitutional supercooling. This arises because the critical wave length for instability decreases as solidification rate increases and thus the effects of capillarity (solid-liquid surface tension) play a strong stabilizing role. This gives rise to the concept of absolute stability, according to which the system will always be stable for a sufficiently large rate of solidification. This enhanced stabilization by capillarity is present only so long as local equilibrium is maintained at the solid-liquid interface. If the interfacial temperature drops below its equilibrium value by an amount dependent on growth rate, oscillatory morphological instabilities can occur. The differences among these various stability criteria are illustrated by means of some simple two-dimensional diagrams that should supplant the conventional plots of (temperature gradient)/(growth rate) vs. alloy concentration.

Sekerka, R. F.↗
NASA NTRS1982

Terrestrial impact rates for long and short-period comets

The present calculations of terrestrial impact rates for longand short-period comets crossing the earth's orbit respectively yield probabilities of 2.2 x 10 to the -9th/perihelion passage (with a probable velocity of 56.6 km/sec), and 6.6 x 10 to the -9th/perihelion passage (probable velocity, 28.9 km/sec). The total cratering rate from both long- and short-period comets is about 15 percent of the observed rate derived from known terrestrial astroblemes, although there is substantial uncertainty in both estimates. The estimated cratering rate from earth-crossing asteroids given by Shoemaker et al. (1979) is about twice the observed rate, and Monte Carlo simulations of the dynamical evolution of the Oort (1950) cloud yield cometary flux rate estimates for the early solar system of the order of 200 times the current flux.

Weissman, P. R.↗
NASA NTRS1985

Mental workload measurement: Event-related potentials and ratings of workload and fatigue

Event-related potentials were elicited when a digitized word representing a pilot's call-sign was presented. This auditory probe was presented during 27 workload conditions in a 3x3x3 design where the following variables were manipulated: short-term load, tracking task difficulty, and time-on-task. Ratings of workload and fatigue were obtained between each trial of a 2.5-hour test. The data of each subject were analyzed individually to determine whether significant correlations existed between subjective ratings and ERP component measures. Results indicated that a significant number of subjects had positive correlations between: (1) ratings of workload and P300 amplitude, (2) ratings of workload and N400 amplitude, and (3) ratings of fatigue and P300 amplitude. These data are the first to show correlations between ratings of workload or fatigue and ERP components thereby reinforcing their validity as measures of mental workload and fatigue.

Biferno, M. A.↗