SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electromagnetic interactions in hyperfine structure of vibrational and rotational states in rubidium and potassium /isotopes/ fluorides, using electric resonance method
A method is presented for tailoring plate and shell composite structures for optimal forced damped dynamic response. The damping of specific vibration modes is optimized with respect to dynamic performance criteria including placement of natural frequencies and minimization of resonance amplitudes. The structural composite damping is synthesized from the properties of the constituent materials, laminate parameters, and structural geometry based on a specialty finite element. Application studies include the optimization of laminated composite beams and composite shells with fiber volume ratios and ply angles as design variables. The results illustrate the significance of damping tailoring to the dynamic performance of composite structures, and the effectiveness of the method in optimizing the structural dynamic response.
A method is presented for tailoring plate and shell composite structures for optimal forced damped dynamic response. The damping of specific vibration modes is optimized with respect to dynamic performance criteria including placement of natural frequencies and minimization of resonance amplitudes. The structural composite damping is synthesized from the properties of the constituent materials, laminate parameters, and structural geometry based on a specialty finite element. Application studies include the optimization of laminated composite beams and composite shells with fiber volume ratios and ply angles as design variables. The results illustrate the significance of damping tailoring to the dynamic performance of composite structures, and the effectiveness of the method in optimizing the structural dynamic response.
By engineering the geometry of a nonlinear optical crystal, the effective efficiency of all nonlinear optical oscillations can be increased dramatically. Specifically, sphere and disk shaped crystal resonators have been used to demonstrate nonlinear optical oscillations at sub-milliwatt input power when cs light propagates in a Whispering Gallery Mode (WGM) of such a resonant cavity. in terms of both device production and experimentation in quantum optics, some nonlinear optical effects with naturally high efficiency can occult the desired nonlinear scattering process. the structure to the crystal resonator. In this paper, I will discuss a new method for generating poling structures in ferroelectric crystal resonators called calligraphic poling. The details of the poling apparatus, experimental results and speculation on future applications will be discussed.
The electrodynamic coupling of stellar coronal loops to underlying beta velocity fields. A rigorous analysis revealed that the physics can be represented by a simple yet equivalent LRC circuit analogue. This analogue points to the existence of global structure oscillations which resonantly excite internal field line oscillations at a spatial resonance within the coronal loop. Although the width of this spatial resonance, as well as the induced currents and coronal velocity field, explicitly depend upon viscosity and resistivity, the resonant form of the generalized electrodynamic heating function is virtually independent of irreversibilities. This is a classic feature of high quality resonators that are externally driven by a broad band source of spectral power. Applications to solar coronal loops result in remarkable agreement with observations.
The motion of the Jovian commensurability resonances during the early evolution of the solar system induced by the dissipation of the accretion disk results in fundamental differences in the celestial mechanics of objects over which a resonance passes from that observed for a stationary resonance. Objects experiencing resonance passage acquire irreversible increases of average eccentricity to large values accounting for the present-day random velocities of the asteroids. Semi-major axes are similarly irreversibly decreased by amounts capable of clearing the Kirkwood gaps. The gap widths are in agreement with observation.
Accurate values are presented for the fine-structure intervals in the 3P ground state of neutral atomic C-12 and C-13 as obtained from laser magnetic resonance spectroscopy. The rigorous analysis of C-13 hyperfine structure, the measurement of resonant fields for C-12 transitions at several additional far-infrared laser frequencies, and the increased precision of the C-12 measurements, permit significant improvement in the evaluation of these energies relative to earlier work. These results will expedite the direct and precise measurement of these transitions in interstellar sources and should assist in the determination of the interstellar C-12/C-13 abundance ratio.
The problem of electrodynamic coupling of stellar coronal loops where beta is less than 1 to underlying velocity fields where beta is greater than approximately 1 is treated. A rigorous analysis reveals that the physics can be represented by a simple yet equivalent LRC circuit analog. This derived analog suggests the existence of global structure oscillations which resonantly excite internal field line oscillations at a spatial resonance within the coronal loop. Even though the width of this spatial resonance, as well as the induced currents and coronal velocity field, within the resonance region explicitly depends on viscosity and resistivity, the resonant form of the generalized electrodynamic heating functions is virtually independent of irreversibilities. This is a classic feature of high-quality resonators that are driven externally by a broad-band source of spectral power.
Our study of the Infrared Astronomy Satellite (IRAS) properties of ringed galaxies has been largely successful. We have identified what we think is the probable cause of the differences in the IRAS properties among non-interacting barred galaxies as the pattern speed of the bar. The key to identifying this parameter has been our focusing the study on outer-ringed galaxies where we know precisely what is present in the central regions (from available BVI CCD images in our library of images). The theory is that outer rings, through their morphology and other characteristics, can be identified with the outer Lindblad resonance, one of the major resonances in galaxy structure. Using a library of n-body simulations for comparison, we can reliably infer both low and high pattern speed galaxies from the appearance of outer rings and the existence of other ring features. It is clear that in some barred galaxies, the bar pattern speed is high enough to avoid an inner Lindblad resonance, hence such objects do not contain nuclear or circumnuclear star formation. The IRAS observations are most sensitive to nuclear star formation in early-type barred galaxies, and will thus select those barred galaxies where the pattern speed is low enough to allow an inner Lindblad resonance to exist. High pattern speed barred galaxies therefore weaken the correlation between bars and infrared excess. This finding helps to reconcile the inconsistent results found between different studies on the correlation between bars and far-IR emission.
The NASA Glenn Research Center (GRC) is developing an active damping at blade resonances using piezoelectric structure to reduce excessive vibratory stresses that lead to high cycle fatigue (HCF) failures in aircraft engine turbomachinery. Conventional passive damping work was shown first on a nonrotating beam made by Ti-6A1-4V with a pair of identical piezoelectric patches, and then active feedback control law was derived in terms of inductor, resister, and capacitor to control resonant frequency only. Passive electronic circuit components and adaptive feature could be easily programmable into control algorithm. Experimental active damping was demonstrated on two test specimens achieving significant damping on tip displacement and patch location. Also a multimode control technique was shown to control several modes.
Thioperoxy (XSO or XOS) radicals exist in a variety of chemical environments, and they have as a consequence drawn some interest. HSO, an important species in the chemistry of the troposphere, has been examined both experimentally. The halogenated (X = F, Cl or Br) peroxy species and isovalent thioperoxy species have been studied less, but they too are potentially interesting because oxidized sulfur species and halogen sources are present in the atmosphere. Learning the fate of XSO and XOS radicals is important to understanding the atmospheric oxidation chemistry of sulfur compounds. Of these, FSO and ClSO are particularly interesting because they have been directly detected spectroscopically. Recent studies in our laboratory on the photochemistry of thionyl halides (X2SO; where X = F or Cl) have suggested new ways to generate XSO species. The laser-induced photodissociation of thionyl fluoride, F2SO, at 193 nm and thionyl chloride, ClSO, at 248 nm is characterized by a radical mechanism, X2SO -> XSO + X. The structure of FSO has been characterized experimentally by Endo et cd. employing microwave spectroscopy. Using the unrestricted Hartree-Fock (UHF) self-consistent field (SCF) method, Sakai and Morokuma computed the electronic structure of the ground (sup 2)A" and the first excited (sup 2)A' states of FSO. Electron correlation was not taken into account in their study. In a laser photodissociation experiment, Huber et al. identified ClSO mass spectromctrically. ClSO has also been detected in low temperature matrices by EPR and in the gas phase by far IR laser magnetic resonance. Although the structure of FSO is known in detail, the only study, experimental or theoretical, of CISO has been an ab initio HFSCF study by Hinchliffe. Electron correlation corrections were also excluded from this study. In order to better understand the isomerization and dissociation dynamics of the radical species, we have performed ab initio correlated studies of the potential energy surfaces (PES) of ClSO and its isomer ClOS at the QCISD(T)/6-31 G* level of theory. For FSO and FOS, more extensive QCISD/6-31 1G(2df) calculations have been possible, and the results are summarized here.
The FUSE observations of a non-radiative shock wave in the Cygnus Loop were obtained in June and October 2000. The two main results were near equilibration of the kinetic temperature of oxygen with protons and electrons and inferred 3D structure and pre-shock density for the shock including resonance scattering. The 3D structure in turn implies density fluctuations in keeping with the level expected for interstellar turbulence. Major results are contained in an ApJ paper in press and some extensions are contained in a conference proceedings paper in Rev. Mex. A&A in press. Very early results were given in the Ghavamian et al. paper in 2000. The observations of HH2 have not yet been obtained due to the pointing constraints of FUSE. They were scheduled for early January 2003, but we have not yet received the processed data. We are hoping to get the data shortly.
The radial Alfven velocity, V(A), in the magnetosphere was investigated using magnetic field and plasma data from the ISEE-1 spacecraft. The harmonic frequency structure calculated from these data was compared with the observed resonant wave structure in the frequency range 5-100 mHz and over the region L = 3-9. It was found that the frequency of these resonances depend on the A(V), which is a function of the magnetic field strength and plasma density. The toroidal mode resonance frequency structure was modeled for the first four harmonics, with excellent agreement between the modeled and observed harmonics for a passs which does not show a plasmapause gradient. In the presence of a steep plasmapause gradient, the model was found to predict a correspondingly steep increase in the resonance frequencies at the plasmapause, by about 5 mHz for the first harmonic and by 20 mHz for the fourth harmonic. Special consideration is given to the effect of heavy ion mass loading on the modeling.
We review recent progress in our understanding of the nucleon excitation spectrum. Thanks to dedicated efforts at facilities such as ELSA, MAMI and Jefferson Lab, several new nucleon resonances have been discovered, and evidence for previously elusive states has been significantly improved. Numerous decay channels have been observed for the first time, and resonance properties are being extracted from these data by several groups through coupled-channel analyses of varying complexity. Electroproduction experiments have provided further insights into the internal structure of light baryon resonances – for example, the long-debated Roper resonance N (1440) is observed as a three-quark state with a significant meson-cloud component. While the non-relativistic quark model remains a valuable tool for organizing the spectrum of nucleon and Δ resonances, a variety of theoretical frameworks have emerged to offer deeper understanding, including phenomenological quark models, holographic QCD, functional methods, effective field theories, and lattice QCD. We examine the interplay between these approaches, highlight their respective strengths and explore how they complement each other in shaping our knowledge of light baryon resonances. We address several open questions in baryon spectroscopy, including the nature of the enigmatic Λ (1405), ongoing searches for exotic states such as hybrid baryons and pentaquarks, and the dichotomy between microscopic descriptions of baryons in terms of quarks and gluons versus effective hadronic descriptions based on meson-baryon dynamics.
𝛾 decays of the isovector giant dipole resonance (IVGDR) of the deformed nucleus 154 Sm were measured using 2$^{+}_{1}$-Smekal-Raman and elastic scattering of linearly polarized, quasimonochromatic photon beams. The two scattering processes were disentangled through their distinct angular distributions. Their branching ratio and cross sections were determined at six excitation energies covering the 154 Sm IVGDR. Both agree with the predictions of the geometrical model for the IVGDR and confirm 𝛾 decay as an observable sensitive to the structure of the resonance. Consequently, the data place strong constraints on the nuclear shape, including the degree of triaxiality. The derived 154 Sm shape parameters 𝛽 = 0.2925(25) and 𝛾 = 5.0(15)° agree well with other measurements and recent Monte Carlo shell-model calculations.
The near-threshold proton resonance in ¹¹B, recently identified and characterized through independent experi-ments, plays a crucial role in understanding the unexpectedly high decay branch observed in the β-delayed proton emission (β− p) from the neutron halo nucleus ¹¹Be. Critical to interpreting this process is the determination of whether or not this state has any significant α-decay width (rα). A coincidence measurement was conducted to study the alpha-transfer reaction ⁷Li(⁷Li, t ) ¹¹B∗ → ⁷Li +α employing the Super-Enge Split Pole Spectrograph coupled with a silicon detector at Florida State University. This experiment aimed to investigate the structure of α resonances in ¹¹B in the Eₑₓ = 9.0 MeV–14 MeV energy region. In particular, to explore and constrain the α-decay branch of the near-threshold proton resonance at Eₑₓ = 11.44 MeV. No significant α-decay strength was observed from this state. Additionally, the experimental results provided insights into the state at Eₑₓ = 12.55 MeV, previously proposed as the T = 3/2 isobaric analog state of the ¹¹Be ground state. The observed decay pattern, dominated by α + ⁷Li, suggests a strong T = 1/2 component, indicating the need for further experimental measurements.
Metallo dithiolene complexes with biological and catalytic relevance are well-known for having strong metal–ligand covalency, which dictates their valence electronic structures. We present the resonant sulfur Kβ (1s3p) X-ray emission spectroscopy (XES) for a series of Ni and Cu bis(dithiolene) complexes to reveal the ligand sulfur contributions to both the occupied and unoccupied valence orbitals. While S K-edge X-ray absorption spectroscopy played a critical role in identifying the covalency of the unoccupied orbitals of metal dithiolenes, the present focus on XES explores the occupied density of states. For a series of [Cu(mnt) 2 ] n– and [Ni(mnt) 2 ] n– anions and dianions, a comparison of the nonresonant and resonant S Kβ XES spectra highlights the dramatic improvement in spectral resolution and corresponding ability to differentiate subtle changes in occupied electronic structure across the series. Furthermore, the use of resonant inelastic X-ray scattering (RIXS) probes the valence excited states and the core–valence couplings of the complexes. By employing a theoretical approach based on time-dependent density functional theory to interpret the RIXS spectra, we reveal how metal–ligand covalency influences the excited state energies and covalencies. We identify the low energy excited states as having the same symmetry as the nominal “ligand field” or “d–d” states that typically dominate the photophysics of 3d metal complexes but with significant metal– ligand charge transfer character dictated by their covalency. These results suggest that strong metal–ligand covalency can be used to influence the charge-transfer photochemistry of first row transition metal complexes.
Terahertz (THz) metamaterials with high‐figure‐of‐merit (high‐FoM) performance resonance are essential for advancing sensors, detectors, and imagers. Conventional designs focus on symmetric or low‐asymmetry geometric structures, leaving high‐asymmetry designs largely unexplored due to the inefficiency of trial‐and‐error‐based rational design. Recent deep learning techniques offer automation and acceleration but are constrained by the need for large datasets inherent to their data‐driven nature. Here, a novel prior knowledge‐guided generative model augmented by a physics‐constrained active learning mechanism to design high‐asymmetry metamaterials. An advanced diffusion model learns features from a small set of classical structures with high‐FoM THz resonance and generates new high‐asymmetry structures. To mitigate the limited number of classical structures, the generated high‐asymmetry structures are actively selected and integrated into the initial training dataset based on their physical characteristics. Experimental results demonstrate the superior resonance performance of the generated high‐asymmetry metamaterials over classical designs, exhibiting improvements exceeding 30% in key resonance metrics. Remarkably, this performance is attained using only 68 classical structures as the initial training dataset, significantly reducing the data requirements for deep learning‐based metamaterial design. The proposed scheme for generating high‐asymmetry structures provides a new effective and efficient solution for high‐FoM resonance, expanding applications in high‐sensitivity THz metadevices.