Search NASA⌕ Search

SEARCH · Search NASA

Results for “SAR processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Synthetic-aperture radar (SAR) imaging with range-resolved reflection data

SAR imaging may be performed with range-resolved reflection data, where a spread-spectrum signal, such as a code division multiple access (CDMA) signal, is transmitted instead of a simple frequency chirp. The reflected spread-spectrum signal may be analyzed to gather range-resolved reflection data. Range-resolved reflection data may be gathered at each angular view. This data may be used to construct a more accurate approximation of the Fourier transform of the desired image than can be done by a conventional SAR approach. The image may be reconstructed from this Fourier transform using Fourier inversion techniques similar to those used in conventional SAR approaches. The range-resolved reflection scheme generally requires somewhat more processing to recover the image as compared with conventional SAR systems, but provides a significantly more stable image with less degradation from effects that plague conventional SAR systems. This can eliminate the need for phase coherency altogether and also eliminate “phase drift,” which leads to image distortion. This may be especially well suited for high resolution imaging of relatively large targets.

47 OTHER INSTRUMENTATION↗
DOE OSTI2013

GMTI Processing using Back Projection

Backprojection has long been applied to SAR image formation. It has equal utility in forming the range-velocity maps for Ground Moving Target Indicator (GMTI) radar processing. In particular, it overcomes the problem of targets migrating through range resolution cells.

Doerry, Armin Walter↗
NASA NTRS1993

Characteristics of arachnoids from Magellan data

Current high resolution Magellan data enables more detailed geological study of arachnoids, first identified by Barsukov et al. as features characterized by a combination of radar-bright, concentric rings and radiating lineations, named 'arachnoids' on the basis of their spider and web-like appearance. Identification of arachnoids in Magellan data has been based on SAR images, in keeping with the original definition. However, there is some overlap by other workers in identification of arachnoids, corona (predominantly bright rings), and novae (predominantly radiating lineations), as all of these features share some common characteristics. Features used in this survey were chosen based on their classification as arachnoids in Head et al.'s catalog and on SAR characteristics matching Barsukov et al.'s original definition. The 259 arachnoids have been currently identified on Venus, all of which were considered in this study. Fifteen arachnoids from different regions, chosen for their 'type' characteristics and lack of deformation by other regional processes, were studied in depth, using SAR and altimetric data to map and profile these arachnoids in an attempt to better determine their geologic and altimetric characteristics and possible formation sequences.

Dawson, C. B.↗
NASA NTRS1996

Air Traffic Complexity Measurement Environment (ACME): Software User's Guide

A user's guide for the Air Traffic Complexity Measurement Environment (ACME) software is presented. The ACME consists of two major components, a complexity analysis tool and user interface. The Complexity Analysis Tool (CAT) analyzes complexity off-line, producing data files which may be examined interactively via the Complexity Data Analysis Tool (CDAT). The Complexity Analysis Tool is composed of three independently executing processes that communicate via PVM (Parallel Virtual Machine) and Unix sockets. The Runtime Data Management and Control process (RUNDMC) extracts flight plan and track information from a SAR input file, and sends the information to GARP (Generate Aircraft Routes Process) and CAT (Complexity Analysis Task). GARP in turn generates aircraft trajectories, which are utilized by CAT to calculate sector complexity. CAT writes flight plan, track and complexity data to an output file, which can be examined interactively. The Complexity Data Analysis Tool (CDAT) provides an interactive graphic environment for examining the complexity data produced by the Complexity Analysis Tool (CAT). CDAT can also play back track data extracted from System Analysis Recording (SAR) tapes. The CDAT user interface consists of a primary window, a controls window, and miscellaneous pop-ups. Aircraft track and position data is displayed in the main viewing area of the primary window. The controls window contains miscellaneous control and display items. Complexity data is displayed in pop-up windows. CDAT plays back sector complexity and aircraft track and position data as a function of time. Controls are provided to start and stop playback, adjust the playback rate, and reposition the display to a specified time.

Source record↗
NASA NTRS1997

Advanced Algorithms and High-Performance Testbed for Large-Scale Site Characterization and Subsurface Target Detecting Using Airborne Ground Penetrating SAR

A team of US Army Corps of Engineers, Omaha District and Engineering and Support Center, Huntsville, let Propulsion Laboratory (JPL), Stanford Research Institute (SRI), and Montgomery Watson is currently in the process of planning and conducting the largest ever survey at the Former Buckley Field (60,000 acres), in Colorado, by using SRI airborne, ground penetrating, Synthetic Aperture Radar (SAR). The purpose of this survey is the detection of surface and subsurface Unexploded Ordnance (UXO) and in a broader sense the site characterization for identification of contaminated as well as clear areas. In preparation for such a large-scale survey, JPL has been developing advanced algorithms and a high-performance restbed for processing of massive amount of expected SAR data from this site. Two key requirements of this project are the accuracy (in terms of UXO detection) and speed of SAR data processing. The first key feature of this testbed is a large degree of automation and a minimum degree of the need for human perception in the processing to achieve an acceptable processing rate of several hundred acres per day. For accurate UXO detection, novel algorithms have been developed and implemented. These algorithms analyze dual polarized (HH and VV) SAR data. They are based on the correlation of HH and VV SAR data and involve a rather large set of parameters for accurate detection of UXO. For each specific site, this set of parameters can be optimized by using ground truth data (i.e., known surface and subsurface UXOs). In this paper, we discuss these algorithms and their successful application for detection of surface and subsurface anti-tank mines by using a data set from Yuma proving Ground, A7, acquired by SRI SAR.

Fijany, Amir↗
NASA NTRS2010

DBSAR's First Multimode Flight Campaign

The Digital Beamforming SAR (DBSAR) is an airborne imaging radar system that combines phased array technology, reconfigurable on-board processing and waveform generation, and advances in signal processing to enable techniques not possible with conventional SARs. The system exploits the versatility inherently in phased-array technology with a state-of-the-art data acquisition and real-time processor in order to implement multi-mode measurement techniques in a single radar system. Operational modes include scatterometry over multiple antenna beams, Synthetic Aperture Radar (SAR) over several antenna beams, or Altimetry. The radar was flight tested in October 2008 on board of the NASA P3 aircraft over the Delmarva Peninsula, MD. The results from the DBSAR system performance is presented.

Rincon, Rafael F.↗
NASA NTRS1986

Shuttle imaging radar-C science plan

The Shuttle Imaging Radar-C (SIR-C) mission will yield new and advanced scientific studies of the Earth. SIR-C will be the first instrument to simultaneously acquire images at L-band and C-band with HH, VV, HV, or VH polarizations, as well as images of the phase difference between HH and VV polarizations. These data will be digitally encoded and recorded using onboard high-density digital tape recorders and will later be digitally processed into images using the JPL Advanced Digital SAR Processor. SIR-C geologic studies include cold-region geomorphology, fluvial geomorphology, rock weathering and erosional processes, tectonics and geologic boundaries, geobotany, and radar stereogrammetry. Hydrology investigations cover arid, humid, wetland, snow-covered, and high-latitude regions. Additionally, SIR-C will provide the data to identify and map vegetation types, interpret landscape patterns and processes, assess the biophysical properties of plant canopies, and determine the degree of radar penetration of plant canopies. In oceanography, SIR-C will provide the information necessary to: forecast ocean directional wave spectra; better understand internal wave-current interactions; study the relationship of ocean-bottom features to surface expressions and the correlation of wind signatures to radar backscatter; and detect current-system boundaries, oceanic fronts, and mesoscale eddies. And, as the first spaceborne SAR with multi-frequency, multipolarization imaging capabilities, whole new areas of glaciology will be opened for study when SIR-C is flown in a polar orbit.

Source record↗
DOE OSTI2024

Notes on Synthetic Aperture Radar Image Quality

Synthetic Aperture Radar (SAR) creates an image of a target scene by coherently processing radar echo returns collected along a flightpath. The quality of the SAR image is inextricably linked to the utility of the image for exploitation supporting the task at hand. Aspects of quality include the fidelity with which it can render the scene being imaged, to include the system’s Impulse Response (IPR) and underlying noise levels/characteristics. Other factors also impact utility.

47 OTHER INSTRUMENTATION↗
NASA NTRS1997

Interpretation of ERS-SAR images over urban surfaces

The results of a preliminary analysis of ERS synthetic aperture radar (SAR) images collected over the Los Angeles basin (CA) are reported. The observations were performed in order to explore the applicability of microwave remote sensing to the study of the energy balance at the urban surface. Large variations of backscatter intensities were observed in the SAR images. The imaging anisotropies observed mask the variations of backscatter due to other processes, illustrating the difficulties of extracting quantitative information from SAR images of urban surfaces.

Dousset, Benedicte↗
NASA NTRS2005

Single-Chip FPGA Azimuth Pre-Filter for SAR

A field-programmable gate array (FPGA) on a single lightweight, low-power integrated-circuit chip has been developed to implement an azimuth pre-filter (AzPF) for a synthetic-aperture radar (SAR) system. The AzPF is needed to enable more efficient use of data-transmission and data-processing resources: In broad terms, the AzPF reduces the volume of SAR data by effectively reducing the azimuth resolution, without loss of range resolution, during times when end users are willing to accept lower azimuth resolution as the price of rapid access to SAR imagery. The data-reduction factor is selectable at a decimation factor, M, of 2, 4, 8, 16, or 32 so that users can trade resolution against processing and transmission delays. In principle, azimuth filtering could be performed in the frequency domain by use of fast-Fourier-transform processors. However, in the AzPF, azimuth filtering is performed in the time domain by use of finite-impulse-response filters. The reason for choosing the time-domain approach over the frequency-domain approach is that the time-domain approach demands less memory and a lower memory-access rate. The AzPF operates on the raw digitized SAR data. The AzPF includes a digital in-phase/quadrature (I/Q) demodulator. In general, an I/Q demodulator effects a complex down-conversion of its input signal followed by low-pass filtering, which eliminates undesired sidebands. In the AzPF case, the I/Q demodulator takes offset video range echo data to the complex baseband domain, ensuring preservation of signal phase through the azimuth pre-filtering process. In general, in an SAR I/Q demodulator, the intermediate frequency (fI) is chosen to be a quarter of the range-sampling frequency and the pulse-repetition frequency (fPR) is chosen to be a multiple of fI. The AzPF also includes a polyphase spatial-domain pre-filter comprising four weighted integrate-and-dump filters with programmable decimation factors and overlapping phases. To prevent aliasing of signals, the bandwidth of the AzPF is made 80 percent of fPR/M. The choice of four as the number of overlapping phases is justified by prior research in which it was shown that a filter of length 4M can effect an acceptable transfer function. The figure depicts prototype hardware comprising the AzPF and ancillary electronic circuits. The hardware was found to satisfy performance requirements in real-time tests at a sampling rate of 100 MHz.

Gudim, Mimi↗
NASA NTRS1994

Remote sensing of ocean waves: The Surface Wave Process Program experiment

An airborne synthetic aperture radar (SAR) has been used as an interferometer to obtain direct, calibrated measurements of the ocean wind wave directional spectrum. Flights over the same area from three different directions produced reasonably consistent results. The SAR-derived wave data agree well with simultaneous observations by a conventional wave measuring system and with a novel in situ acoustic Doppler system.

Goldstein, R. M.↗
NASA NTRS1996

(abstract) The Evolving Spaceborne Radar Data Support to Earth Science and Operations at the Alaska SAR Facility

The Alaska SAR Facility (ASF) has been receiving, processing, archiving, and distributing data for Earth scientists and operations since it began receiving data in 1991. Four radar satellites are now being handled. Recent developments have served to increase the level of services of ASF to the Earth science community considerably. These developments are discussed.

mapping radar interferometry Alaska topography ant↗
NASA NTRS1991

Current status and future developments in radar remote sensing

Some of the major initiatives and directions of remote sensing using SAR (Synthetic Aperture Radar) data alone and in conjunction with other sensors for Earth science investigations are outlined. Specific emphasis is on areas key to global monitoring using SAR data from spaceborne platforms: calibration, geophysical processing, and generation of digital elevation models. Calibration as used here encompasses end to end system characterization over the life of a sensor and characterization of data products relative to past and future sensors. Geophysical processing is defined here to include any processing which results in derived geophysical units. An additional data type, topography, which is required to complete the three dimensional view of surface properties and correct for distortions inherent in SAR is discussed. Future challenges in radar remote sensing include development of strategies to extrapolate from regional to global scale models and development of new sensor technology.

Evans, Diane L.↗
NASA NTRS1992

Current status and future developments in radar remote sensing

Some of the major initiatives and directions of remote sensing using SAR (Synthetic Aperture Radar) data alone and in conjunction with other sensors for earth science investigations are outlined. Specific emphasis is on areas key to global monitoring using SAR data from spaceborne platforms: calibration, geophysical processing, and generation of digital elevation models. Calibration as used here encompasses end-to-end system characterization over the life of a sensor and characterization of data products relative to past and future sensors. Geophysical processing is defined here to include any processing which results in derived geophysical units. An additional data type, topography, which is required to complete the three-dimensional view of surface properties and correct for distortions inherent in SAR is discussed. Future challenges in radar remote sensing include development of strategies to extrapolate from regional to global scale models and development of new sensor technology.

Evans, Diane L.↗
DOE OSTI2013

MREG V1.1 : a multi-scale image registration algorithm for SAR applications.

MREG V1.1 is the sixth generation SAR image registration algorithm developed by the Signal Processing&Technology Department for Synthetic Aperture Radar applications. Like its predecessor algorithm REGI, it employs a powerful iterative multi-scale paradigm to achieve the competing goals of sub-pixel registration accuracy and the ability to handle large initial offsets. Since it is not model based, it allows for high fidelity tracking of spatially varying terrain-induced misregistration. Since it does not rely on image domain phase, it is equally adept at coherent and noncoherent image registration. This document provides a brief history of the registration processors developed by Dept. 5962 leading up to MREG V1.1, a full description of the signal processing steps involved in the algorithm, and a user's manual with application specific recommendations for CCD, TwoColor MultiView, and SAR stereoscopy.

Eichel, Paul H.↗
NASA NTRS1984

Digital processing considerations for extraction of ocean wave image spectra from raw synthetic aperture radar data

The digital processing requirements of several algorithms for extracting the spectrum of a detected synthetic aperture radar (SAR) image from the raw SAR data are described and compared. The most efficient algorithms for image spectrum extraction from raw SAR data appear to be those containing an intermediate image formation step. It is shown that a recently developed compact formulation of the image spectrum in terms of the raw data is computationally inefficient when evaluated directly, in comparison with the classical method where matched-filter image formation is an intermediate result. It is also shown that a proposed indirect procedure for digitally implementing the same compact formulation is somewhat more efficient than the classical matched-filtering approach. However, this indirect procedure includes the image formation process as part of the total algorithm. Indeed, the computational savings afforded by the indirect implementation are identical to those obtained in SAR image formation processing when the matched-filtering algorithm is replaced by the well-known 'dechirp-Fourier transform' technique. Furthermore, corrections to account for slant-to-ground range conversion, spherical earth, etc., are often best implemented in the image domain, making intermediate image formation a valuable processing feature.

Lahaie, I. J.↗
NASA NTRS1982

Modeling and a correlation algorithm for spaceborne SAR signals

A mathematical model of a spaceborne synthetic aperture radar (SAR) response is presented. Thhe associated SAR system performance, in terms of the resolution capability, is also discussed. The analysis of spaceborne SAR target response indicates that the SAR correlation problem is a two-dimensional one with a linear shift-variant response function. A new digital processing algorithm is proposed here in order to realize an economical digital SAR correlation system. The proposed algorithm treats the two-dimensional correlation by a combination of frequency domain fast correlation in the azimuth dimension and a time-domain convolver type of operation in the range dimension. Finally, digitally correlated SEASAT satellite SAR imagery is used in an exemplary sense to validate the SAR response model and the new digital processing technique developed.

Wu, C.↗