Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLAR EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Absorption of solar radiation by alkali vapors

A theoretical study of the direct absorption of solar radiation by the working fluid of high temperature, high efficiency energy converters has been carried out. Alkali vapors and potassium vapor in particular were found to be very effective solar absorbers and suitable thermodynamically for practical high temperature cycles. Energy loss via reradiation from a solar boiler was shown to reduce the overall efficiency of radiation-heated energy converters, although a simple model of radiation transfer in a potassium vapor solar boiler revealed that self-trapping of the reradiation may reduce this loss considerably. A study was also made of the requirements for a radiation boiler window. It was found that for sapphire, one of the best solar transmitting materials, the severe environment in conjunction with high radiation densities will require some form of window protection. An aerodynamic shield is particularly advantageous in this capacity, separating the window from the absorbing vapor to prevent condensation and window corrosion and to reduce the radiation density at the window.

Mattick, A. T.↗
NASA NTRS1984

Is There a Speed Limit?

Fundamental barriers limiting the rate of the growth of crystals suitable for processing into cost efficient effective solar cells are discussed. The physical conditions which permit the growth of sheet directly from the melt are explored to identify the factors which control the growth rate. These criteria are edge defined film fed growth, free meniscus growth and inclined interface growth with specific reference to the effects that increase of speed has on those aspects of the resulting material that bear on the quality of the solar cells made from it. Useful directions for future research are indicated.

Chalmers, B.↗
NASA NTRS1972

Relationship of dislocation density of silicon to solar cell current loss at low temperature

Large decreases in short circuit current of silicon solar cells have been reported to occur as temperature is decreased below -60 C. Experimental results are presented which relate high dislocation density of the silicon bulk material of cells to the large current loss effect. Solar cells were made by the same processes from a variety of silicon materials, namely low-dislocation-density, high-dislocation-density float-zone, and Czochralski silicon. All cells were etched in a manner which revealed the dislocation density of the cell bulk silicon. It was found that every cell made from any of the various low-dislocation starting materials obtained from three suppliers still had a low-dislocation bulk after cell processing, and that all such cells belonged to category good. Cells made from float-zone materials showed high dislocation densities in their bulk and either fell into category poor, or had intermediate losses of short-circuit current at low temperature.

Mandelkorn, J.↗
NASA NTRS1987

Simulation and analysis of a geopotential research mission

Methods for the determination of the initial conditions for the two satellites that will satisfy Geopotential Research Mission (GRM) requirements are investigated. For certain gravitational recovery techniques, the satellites must remain close to a specified separation distance and their groundtracks must repeat after a specified interval of time. Since the objective of the GRM mission is to improve the gravity model, any pre-mission orbit predicted using existing gravity models will be in error. A technique has been developed to eliminate the drift between the two satellites caused by gravitational modeling errors and return them to repeating groundtracks. The concept of frozen orbits, which minimize altitude variations over given latitudes, was investigated. Finally, the effects of temporal perturbations on the relative range-rate signal were studied. At the proposed altitude of 160 km, the range-rate signal produced by perturbations other than the static geopotential field are dominated by the luni-solar effect. This study demonstrates that the combined effects of all the temporal perturbations does not prevent the orbit from being frozen or the satellites from obtaining a repeating groundtrack to within a specified closure distance.

White, Lisa K.↗
NASA NTRS2001

Magnetohydrodynamic Simulations of the Effects of the Solar Wind on the Jovian Magnetosphere

We have used a three-dimensional magnetohydrodynamic simulation of the interaction between the solar wind and a rapidly rotating magnetosphere to study the effects of the solar wind dynamic pressure and the interplanetary magnetic field IMF on the configuration of the Jovian magnetosphere. Both the solar wind dynamic pressure and the IMF can cause substantial changes in the magnetosphere. On the dayside when the pressure increases the bow shock and magnetopause move toward Jupiter and the equatorial magnetic field in the middle magnetosphere becomes more dipole-like. When the pressure decreases the boundaries move farther from Jupiter and the dayside magnetic field becomes stretched out into a more tail-like configuration. For northward IMF the boundaries move toward Jupiter but the field becomes more tail-like. Finally, for southward IMF the boundaries move away and the field becomes more dipole-like. These changes are qualitatively consistent with those observed on spacecraft passing through the dayside magnetosphere. However, we were not always able to get quantitative agreement. In particular the model does not reproduce the extremely tail-like magnetic field observed during the Pioneer 10 and Ulysses inbound passes. The solar wind and IMF also influence the configuration of the middle magnetosphere in the magnetotail. Tailward flows were found in the nightside equatorial plasma sheet for most IMF orientations. Both inertial effects and the IMF influence reconnection in the tail. The only time the tailward flow in the magnetotail stopped was during prolonged intervals with southward IMF. Then reconnection in the polar cusp caused the flow to move out of the equatorial plane.

Walker, Raymond J.↗
NASA NTRS1994

Estimating 11-year solar UV variations using 27-day response as a guide to isolate trends in total column ozone

The total column ozone response to 11-year solar ultraviolet (UV) variations is estimated here from the observed response to 27-day solar variations adjusted for the theoretical difference between the 27-day response and 11-year response. The estimate is tested by comparing two data sets where long-term drifts have been removed, the Nimbus 7 TOMS Version 6 total column ozone and the 280 nm core-to-wing ratio (a proxy for solar UV variations). The 365-day running means of data area-weighted between 40 deg N to 40 deg S latitude give a 1.9% ozone variation related to the 11-year solar cycle compared with the estimate of 1.8%. Estimates of linear trends were reduced by a factor of 2 by including solar effects. The standard deviation from the empirical model was reduced from 1.0 to 0.6 Dobson Units, by including the quasi-biennial oscillation (QBO), but the QBO did not significantly alter trend estimates. Both the ozone responses to 27-day and 11-year solar variations were considerably stronger than predicted by a 2-D theoretical model.

Keating, G. M.↗
NASA NTRS1997

A multi-wavelength analysis of the February 6/7, 1997 coronal mass ejection

The coronal mass ejection (CME) event on 6 to 7 February 1997 that originate from the southwest quadrant of the sun are analyzed. The CME is accelerated from a projected speed of 170 km/s to about 650 km/s at 25 solar radii. The CME is an arcade eruption followed by bright prominence core structures. The CME was accompanied by an arcade formation. The X-ray and extreme ultraviolet observations suggest that the reconnection proceeded from the northwest and the southeast end of a filament channel. The CME event caused interplanetary effects that produced a medium size geomagnetic storm on earth. Issues relating to the origin and propagation of geo-effective solar disturbances are addressed.

Plunkett, S. P.↗
NASA NTRS1994

Flare rates and the McIntosh active-region classifications

Multiple linear regression analysis was used to derive the effective solar flare contributions of each of the McIntosh classification parameters. The best fits to the combined average number of M- and X-class X-ray flares per day were found when the flare contributions were assumed to be multiplicative rather than additive. This suggests that nonlinear processes may amplify the effects of the following different active-region properties encoded in the McIntosh classifications: the length of the sunspot group, the size and shape of the largest spot, and the distribution of spots within the group. Since many of these active-region properties are correlated with magnetic field strengths and fluxes, we suggest that the derived correlations reflect a more fundamental relationship between flare production and the magnetic properties of the region. The derived flare contributions for the individual McIntosh parameters can be used to derive a flare rate for each of the three-parameter McIntosh classes. These derived flare rates can be interpreted as smoothed values that may provide better estimates of an active region's expected flare rate when rare classes are reported or when the multiple observing sites report slightly different classifications.

Bornmann, P. L.↗
NASA NTRS2018

Post-Formation Sodium Loss on the Moon: A Bulk Estimate

The Moon and Earth are generally similar in terms of composition, but there exist variations in the abundance of certain elements among the two bodies. These differences are a likely consequence of differing physical evolution of the two bodies over the solar system's history. While previous works have assumed this may be due to conditions during the Moonâ€"TM"s formation, we explore the likelihood that the observed depletion in Sodium in lunar samples may be partially due to post-formation mechanisms. Solar effects, loss from a primordial atmosphere and impacts are some of the dominant post-formation mechanisms that we examine. We describe how our past and current modeling efforts indicate that a significant fraction of the observed depletion of sodium in lunar samples relative to a bulk silicate earth composition may have been due to solar activity, atmospheric loss and impacts. Using profiles of sodium abundances from lunar crustal samples may thus serve as a powerful tool towards exploring conditions on the Moon's surface throughout solar system history. Conditions on the Moon immediately after formation may still be recorded in the lunar crust and may provide a window towards interpreting observations from some of the first rocky exoplanets that will be most amenable to characterization. Potential spatial variation of sodium in the lunar crust may be a relevant consideration for future sample return efforts. Sodium Depletion in the Lunar Crust: Lunar

Solar↗
NASA NTRS1984

Proceedings of the Flat-plate Solar Array Project Research Forum on the High-speed Growth and Characterization of Crystals for Solar Cells

The High-Speed Growth and Characterization of Crystals for Solar Cells Research Forum was held on July 25-27, 1983, at the Sandpiper Bay Hotel in ort St. Lucie, Florida. The Research Forum was arranged into eight interactive sessions and addressed theoretical and experimental phenomena, applications, and characterization including stress/strain and other problem areas that limit the rate of growth of crystals suitable for processing into efficient, cost-effective solar cells. The Flat-Plate Solar Array Project of the Jet Propulsion Laboratory sponsored the meeting: Thirty-five invited papers were presented. Discussion periods followed each presentation. These Proceedings are a record of the papers and the discussions.

Katherine A. Dumas↗
NASA NTRS1985

Return currents in solar flares - Collisionless effects

If the primary, precipitating electrons in a solar flare are unstable to beam plasma interactions, it is shown that strong Langmuir turbulence can seriously modify the way in which a return current is carried by the background plasma. In particular, the return (or reverse) current will not be carried by the bulk of the electrons, but by a small number of high velocity electrons. For beam/plasma densities greater than 0.01, this can reduce the effects of collisions on the return current. For higher density beams where the return current could be unstable to current driven instabilities, the effects of strong turbulence anomalous resistivity is shown to prevent the appearance of such instabilities. Again in this regime, how the return current is carried is determined by the beam generated strong turbulence.

Rowland, H. L.↗
NASA NTRS1993

Orbit determination error analysis and comparison of station-keeping costs for Lissajous and halo-type libration point orbits and sensitivity analysis using experimental design techniques

Spacecraft in orbit near libration point L1 in the Sun-Earth system are excellent platforms for research concerning solar effects on the terrestrial environment. One spacecraft mission launched in 1978 used an L1 orbit for nearly 4 years, and future L1 orbital missions are also being planned. Orbit determination and station-keeping are, however, required for these orbits. In particular, orbit determination error analysis may be used to compute the state uncertainty after a predetermined tracking period; the predicted state uncertainty levels then will impact the control costs computed in station-keeping simulations. Error sources, such as solar radiation pressure and planetary mass uncertainties, are also incorporated. For future missions, there may be some flexibility in the type and size of the spacecraft's nominal trajectory, but different orbits may produce varying error analysis and station-keeping results. The nominal path, for instance, can be (nearly) periodic or distinctly quasi-periodic. A periodic 'halo' orbit may be constructed to be significantly larger than a quasi-periodic 'Lissajous' path; both may meet mission requirements, but perhaps the required control costs for these orbits are probably different. Also for this spacecraft tracking and control simulation problem, experimental design methods can be used to determine the most significant uncertainties. That is, these methods can determine the error sources in the tracking and control problem that most impact the control cost (output); it also produces an equation that gives the approximate functional relationship between the error inputs and the output.

Gordon, Steven C.↗
NASA NTRS1984

Parabolic Dish Concentrator (PDC-1)

The design, construction, and installation of the Parabolic Dish Concentrator, Type 1 (PDC-1) has been one of the most significant JPL concentrator projects because of the knowledge gained about this type of concentrator and the development of design, testing, and analysis procedures which are applicable to all solar concentrator projects. The need for these procedures was more clearly understood during the testing period which started with the prototype panel evaluation and ended with the performance characterization of the completed concentrator. For each phase of the test program, practical test procedures were required and these procedures defined the mathematical analysis which was essential for successful concentrator development. The concentrator performance appears to be limited only by the distortions resulting from thermal gradients through the reflecting panels. Simple optical testing can be extremely effective, but comprehensive mechanical and optical analysis is essential for cost effective solar concentrator development.

Dennison, E. W.↗
NASA NTRS1989

Solar radiation

The effects of solar radiation in aerospace environments on aerospace systems are examined. It was concluded that most materials degrade to solar radiation. The information available on short term effects on materials provides a limited data base. Flight data on coating degradation seems to be confused by contamination. Other conclusions of data examination are listed.

Slemp, Wayne S.↗
NASA NTRS2014

Comparison of Low-Thrust Control Laws for Application in Planetocentric Space

Recent interest at NASA for the application of solar electric propulsion for the transfer of significant payloads in cislunar space has led to the development of high-fidelity simulations of such missions. With such transfers involving transfer times on the order of months, simulation time can be significant. In the past, the examination of such missions typically began with the use of lower-fidelity trajectory optimization tools such as SEPSPOT to develop and tune guidance laws which delivered optimal or near- optimal trajectories, where optimal is generally defined as minimizing propellant expenditure or time of flight. The transfer of these solutions to a high-fidelity simulation is typically an iterative process whereby the initial solution may nearly, but not precisely, meet mission objectives. Further tuning of the guidance algorithm is typically necessary when accounting for high-fidelity perturbations such as those due to more detailed gravity models, secondary-body effects, solar radiation pressure, etc. While trajectory optimization is a useful method for determining optimal performance metrics, algorithms which deliver nearly optimal performance with minimal tuning are an attractive alternative.

SOLAR ELECTRIC PROPULSION↗