Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLID PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

In situ reductive dissolution to remove Iodine-129 from aquifer sediments

The use of an aqueous reductant (Na-dithionite) with pH buffer (K-carbonate, pH 12) was evaluated in this laboratory study as a potential remedial approach for removing Fe oxide associated iodine and enhancing pump-and-treat extraction from iodine-contaminated sediments in the unconfined aquifer in the 200 West Area of the Hanford site. X-ray fluorescence data of untreated sediment indicated that iodine was largely associated with Fe (i.e., incorporated into Fe oxides), however, XANES data was inconclusive as to valence state. During groundwater leaching, aqueous and adsorbed iodine was quickly released, then additional iodine was slowly released potentially from dissolution of one or more surface phases. The Na-dithionite treatment removed greater iodine mass (2.9x) at a faster rate (1 to 4 orders of magnitude) compared to leaching with groundwater alone. Iron extractions for untreated and treated sediments showed a decrease in Fe(III)-oxides, which likely released iodine to aqueous solution. Solid phase inorganic carbon and aqueous Ca and Mg analysis further confirmed that significant calcite dissolution did not occur in these experiments meaning these phases did not release significant iodine. Although it was expected that, after treatment, 127 I concentrations would eventually be lower than untreated sediments, leaching experiments showed continued, elevated iodine concentrations for treated samples over 750 hours. Stop flow events during 1-D column leaching suggested that some iodide precipitated within the first few pore volumes. In the survey of metals during leaching, some silver was detected which could have been solubilized by the elevated pH of initial Na-dithionite injection. Then, silver (or other metals) could have subsequently precipitated with iodide during the initial stop flow event forming a slowly dissolving source. Although significantly greater iodine is removed with treatment, the long-term leaching needs to be investigated further as it may limit dithionite treatment at the field scale.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Phase transformation path in Aluminum under ramp compression; simulation and experimental study

Abstract We present a framework based on non-equilibrium molecular dynamics (NEMD) to reproduce the phase transformation event of Aluminum under ramp compression loading. The simulated stress-density response, virtual x-ray diffraction patterns, and structure analysis are compared against the previously observed experimental laser-driven ramp compression in-situ x-ray diffraction data. The NEMD simulations show the solid–solid phase transitions are consistent to experimental observations with a close-packed face-centered cubic (fcc) (111), hexagonal close-packed (hcp) structure (002), and body-centered cubic bcc (110) planes remaining parallel. The atomic-level analysis of NEMD simulations identifiy the exact phase transformation pathway happening via Bain transformation while the previous in situ x-ray diffraction data did not provide sufficient information for deducing the exact phase transformation path.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Biogeochemistry of Pond B (Savannah River Site, South Carolina, USA): Sediment Core, Total extraction data, Pond B Savannah River Site July 2019. Subsurface Biogeochemistry of Actinides SFA

Pond B at Savannah River Site (SRS, South Carolina) is a monomictic reservoir that received SRS R reactor cooling water from 1961–1964. Previous studies conducted between the 1980s–1990s on the water column and sediments of Pond B measured trace amounts of Pu (33 MBq 238Pu and 430 MBq 239,240Pu), 241Am, and 137Cs. Since then, the pond has been relatively isolated and the radionuclide concentrations have not been monitored over time. Herein, about 30 years after the last publication on Pond B, we are re-evaluating the geochemistry and radionuclide distribution within Pond B at four locations along a horizontal transect from the inlet to outlet.This study investigated the distribution of anthropogenic radionuclides Pu-239 and Cs-137 along with total organic carbon, iron, and trace element in contaminated sediments of Pond B at the Savannah River Site (SRS). Pond B received reactor cooling water from 1961 to 1964, and trace amounts of Pu-239 and Cs-137 during operations. Our study collected sediment cores to determine concentrations of Pu-239, Cs-137, and major and minor elements in solid phase, pore water and an electrochemical method was used on wet cores to determine dissolved elemental concentrations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Shining light on nanoscale ‘vine-on-stick’ eutectic structures in the Al-Ce-Ni system

Multiphase eutectics often comprise entangled solid phases with nanoscale periodicity, making it difficult to unravel their 3D connectivity using conventional 2D techniques. Among such systems, the three-phase eutectic Al-Al 11 Ce 3 -Al 3 Ni stands out for its ultrafine (∼100 nm) interphase spacing and promising creep resistance, yet its microstructure remains relatively unexplored despite its potential for high-temperature applications. Here, we use scanning hard X-ray microscopy with an unprecedented ∼10 nm pixel size to resolve its 3D morphology. Reconstructions reveal a novel “vine-on-stick” motif, wherein Al 11 Ce 3 wraps around Al 3 Ni pillars. Analysis of phase tortuosities confirms that Al 11 Ce 3 exhibits more convoluted morphologies than Al 3 Ni. No orientation relationship was observed between the two intermetallics, suggesting that growth is controlled by local solute gradients rather than epitaxy. Fragmentation of intermetallics along their longitudinal axis suggests a Rayleigh-type breakup mechanism in solid state. The “vine-on-stick” pattern may generalize to other alloy systems with variable interfacial anisotropies and low mutual solubilities.

36 MATERIALS SCIENCE↗
DOE OSTI2024

From irregular to regular eutectic growth in the Al-Al 3 Ni system: In situ observations during directional solidification

Here we investigate the irregular eutectic growth dynamics of the Al-Al 3 Ni alloy, in which one of the solid phases (Al 3 Ni) grows faceted from the liquid. Leveraging in situ optical microscopy and synchrotron transmission x-ray microscopy, we address the question of the degree of coupling between Al and Al 3 Ni at the growth front and that of the shape of the microstructures left behind in the bulk solid during directional solidification. Real-time optical observations bring evidence for a morphological transition from a eutectic-grain dependent, irregular eutectic growth at low solidification velocity V (typically 1 μm s -1 ), to a weakly anisotropic, regular growth at higher V ( reaching 10 μm s -1 ). Unprecedented x-ray nano-imaging of the solid–liquid interface, and 3D characterization of the growth patterns, were made possible by a new DS setup at Brookhaven National Laboratory’s NSLS-II. At low V, the leading tips of partly faceted Al 3 Ni crystals are observed to grow not far ahead of the Al growth front. Correlating in situ images and postmortem 3D tomographic reconstructions reveals that the presence of faceted and non-faceted regions of Al 3 Ni crystals in the solid is a direct consequence of coupling and decoupling during DS, respectively. Upon increasing V, the lead distance of Al 3 Ni vanishes, and the shape of Al 3 Ni ceases to be governed by faceted growth. These observations cast light onto the basic mechanisms (faceted growth, diffusive coupling, and the dynamics of trijunctions) governing a faceted to rod-like transition upon increasing V in the Al 3 Ni system, with broad implications to a large class of irregular eutectics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molten fluid electrode apparatus

A battery includes negative electrode material and positive electrode material where the materials are in a solid phase except for selected portions that are heated to transform the selected portions into a fluid. The fluid portion of negative electrode material is directed to a negative electrode region of a reaction chamber and the fluid portion of positive electrode material is directed to a positive electrode region of the reaction chamber where a solid electrolyte containing ions of the negative electrode separates the positive electrode region from the negative electrode region.

Vissers, Daniel R.↗
DOE OSTI2021

Crystallization and Phase Transformations of Aluminum (Oxy)hydroxide Polymorphs in Caustic Aqueous Solution

Gibbsite, bayerite, and boehmite are important aluminum (oxy)hydroxide minerals in nature and have been widely deployed in various industrial applications. They are also major components in caustic nuclear wastes stored at various U.S. locations. Knowledge of their crystallization and phase transformation processes contributes to understanding their occurrence and could help optimize waste treatment processes. While it has been reported that partial conversion of bayerite and gibbsite to boehmite occurs in basic solutions at elevated temperatures, systematic studies of factors affecting the phase transformation as well as the underlying reaction mechanisms are non-existent, particularly in highly alkaline solutions. We explored the effects of sodium hydroxide concentrations (0.1~3 M), reaction temperature (60~100 ?) and aluminum concentrations (0.1~1 M) on the crystallization and transformation of these aluminum (oxy)hydroxides. Detailed structural and morphological characterization by X-ray diffraction (XRD), scanning electron microscopy (SEM), and nuclear magnetic resonance (NMR) spectrometry revealed that these processes depend largely on the reaction temperature and the Al/OH- ratio. When 1 = Al/OH- = 2.5, the reactions favor formation of high crystallinity precipitates, whereas at Al/OH- ratio ? 2.5 precipitation ceases unless the Al concentration is higher than 1 M. We identified pseudoboehmite, bayerite and gibbsite as intermediate phases to bayerite, gibbsite and boehmite, respectively, all of which transform via dissolution-reprecipitation. Gibbsite transforms to boehmite in both acidic and weak caustic environments at temperatures above 80 oC. However, a ‘bar-shaped’ gibbsite morphology dominates in highly caustic environments (3 M NaOH). The findings enable a robust basis for selection of various solid phases by tuning the reaction conditions.

aluminum (oxy)hydroxide polymorphs, crystallizatio↗
DOE OSTI2022

In-Situ Study of Microstructure Evolution of Spinodal Decomposition in an Al-Rich High-Entropy Alloy

High-entropy alloys (HEAs) are materials which leverage the entropy of mixing to motivate the formation of single-phase solid solutions, even of immiscible elements. While these materials are well-recognized for their application to structural engineering, there is increasing interest in the use of HEAs for functional applications such as memory storage and energy devices. The current work investigates the HEA Al 1.3 CoCrCuFeNi, which has been previously shown to be single-phase at high temperatures, but undergoes phase separation at lower temperatures, transforming the structural and the functional properties. This phase separation is investigated at high temperatures with in-situ small angle neutron scattering (SANS) and scanning transmission electron microscopy (EDS). These techniques show that increasing the temperature up to 800°C, the microstructure of the HEA adiabatically disorders and abruptly homogenizes near 700°C, which is consistent with spinodal decomposition. Overall, the microstructural evolution proceeds mainly by the atomistic redistribution of the constituent elements within simple crystal lattices, producing coherent phase mixtures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

CFD Simulation of Biomass Pyrolysis Vapor Upgrading over a Pt/TiO 2 Catalyst in Fixed and Moving Beds

This report presents a comprehensive computational fluid dynamics (CFD) study of the biomass pyrolysis vapor phase upgrading and the catalyst regeneration in different reactors under various operational conditions. This study used the open-source software Multiphase Flow with Interphase eXchanges (MFiX), developed at National Energy Technology Laboratory (NETL) for simulating hydrodynamics, heat transfer, and chemical reactions in multiphase systems. This simulation solved the conservation of mass, momentum, energy, species for gas and solid phases with chemical reactions.

09 BIOMASS FUELS↗
DOE OSTI2024

Reduction of Hg II by Mn II

The reduction of Hg II to Hg I or Hg 0 can lead to significant changes in Hg toxicity and mobility in the environment. Photochemical reduction is the primary process for the reduction of Hg II to Hg 0 in sunlit environments; however, dark reduction of HgII can occur via microbial metabolic processes and/or reduction by reduced natural organic matter, Fe II mineral phases, Fe II sorbed to minerals, or aqueous Fe II . Here, in this study, we demonstrate a novel Hg II reduction pathway involving another environmentally relevant reductant, Mn II . Abiotic reduction of Hg II O by Mn II was studied as a function of pH and anion environment (perchlorate, sulfate, chloride) using X-ray absorption spectroscopy to characterize the solid-phase Hg and Mn species. At circumneutral pH of 7.5, about 70% of Hg II was reduced to elemental Hg 0 within 2 h. In contrast, 12 h were needed to achieve the same extent of reduction at pH 6.9. In the presence of sulfate and chloride, Hg I species were formed. Hg II reduction was initially rapid and coupled with the oxidation of soluble Mn II -oxides to insoluble Mn IV -oxides, followed by a significantly slower reduction of Hg II during the Mn II -catalyzed transformation of the Mn IV -oxides to hydroxide and oxyhydroxide minerals. The observed reduction of Hg II by Mn II at circumneutral pH could be an important transformation pathway for environmental Hg, affecting its bioavailability and mobility under mildly reducing conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Capturing the swelling of solid-electrolyte interphase in lithium metal batteries

Although liquid-solid interfaces are foundational in broad areas of science, characterizing this delicate interface remains inherently difficult because of shortcomings in existing tools to access liquid and solid phases simultaneously at the nanoscale. This leads to substantial gaps in our understanding of the structure and chemistry of key interfaces in battery systems. We adopt and modify a thin film vitrification method to preserve the sensitive yet critical interfaces in batteries at native liquid electrolyte environments to enable cryo–electron microscopy and spectroscopy. We report substantial swelling of the solid-electrolyte interphase (SEI) on lithium metal anode in various electrolytes. Here, the swelling behavior is dependent on electrolyte chemistry and is highly correlated to battery performance. Higher degrees of SEI swelling tend to exhibit poor electrochemical cycling.

25 ENERGY STORAGE↗
DOE OSTI2021

Evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperature

This work studies the evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperatures (up to 800 °C). A multiscale investigation is carried out to study the thermal degradation of cementitious composite materials at multiple scale levels: at cement past level, the dehydration kinetics of cement hydrates (i.e., C–S–H, CH and aluminate hydrates) and development of microcracks are studied as functions of exposure temperatures. The damage mechanism of the inclusion phases and damages within the interfacial transition zone (ITZ) under elevated temperature are also investigated. In addition, the change of mechanical (i.e., elastic moduli, compressive strengths) and thermal (thermal conductivities) properties are measured as functions of the exposure temperature. Based on the experimental studies, a multiscale thermal degradation model is developed where the thermal degradations of cement paste (including water composition, porosity, and solid phase changes), inclusion phases, and the interfaces are captured through a multiscale sub-stepping homogenization scheme. The thermal degradation model is validated through multiple sets of experimental data. Finally, the influence of key parameters including the particle size distribution of the inclusions, the chemical composition, as well as the effects of ITZ damage are studied.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Demonstration of Selective Single-Barium Ion Detection with Dry Diazacrown Ether Naphthalimide Turn-on Chemosensors

Single-molecule fluorescence imaging (SMFI) of gas-phase ions has been proposed for “barium tagging,” a burgeoning area of research in particle physics to detect individual barium daughter ions. This has potential to significantly enhance the sensitivity of searches for neutrinoless double-beta decay (0νββ) that is obscured by background radiation events. The chemistry required to make such sensitive detection of Ba 2+ by SMFI in dry Xe gas at solid interfaces has implications for solid-phase detection methods but has not been demonstrated. Here, we synthesized simple, robust, and effective Ba 2+ -selective chemosensors capable of function within ultrapure high-pressure 136 Xe gas. Turn-on fluorescent naphthalimide-(di)azacrown ether chemosensors were Ba 2+ -selective and achieved SMFI in a polyacrylamide matrix. Here, fluorescence and NMR experiments supported a photoinduced electron transfer mechanism for turn-on sensing. Ba 2+ selectivity was achieved with computational calculations correctly predicting the fluorescence responses of sensors to barium, mercury, and potassium ions. With these molecules, dry-phase single-Ba 2+ ion imaging with turn-on fluorescence was realized using an oil-free microscopy technique for the first time—a significant advance toward single-Ba 2+ ion detection within large volumes of 136 Xe, plausibly enabling a background-independent technique to search for the hypothetical process of 0νββ.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Tuning the Radius Ratio to Enhance Thermoelectric Properties in the Zintl Compounds AM 2 Sb 2 (A = Ba, Sr; M = Zn, Cd)

Five novel Zintl phase solid solutions in the Ba 1–x Sr x Zn 2–y Cd y Sb 2 (0 ≤ x ≤ 0.13(1); 0 ≤ y ≤ 0.32(2)) system were successfully synthesized by the molten Pb metal-flux method, and the powder X-ray diffraction and single-crystal X-ray diffraction analyses proved that all five title compounds adopted the BaCu 2 S 2 -type phase having the orthorhombic Pnma space group (Z = 4, Pearson code oP20) with five crystallographically independent atomic sites. The previously studied BaCu 2 S 2 -type antimonides demonstrated a limited tolerance for doping in contrast to the CaAl 2 Si 2 -type antimonides. To understand the relatively narrower phase width and limited dopability of the title BaCu 2 S 2 -type phase than the CaAl 2 Si 2 -type phase in the overall Ba 1–x Sr x Zn 2–y Cd y Sb 2 system, the radius ratio of cations and anionic elements r + /r – for two structure types were thoroughly investigated. For the first time, the r + /r – ratio was identified as a critical factor for the phase selectivity: (1) r + /r – > 1 favored the BaCu 2 S 2 -type phase, and (2) r + /r – < 1 favored the CaAl 2 Si 2 -type phase. Further, we also revealed the structural transformation mechanism from the more widely observed CaAl 2 Si 2 -type phase to the title BaCu 2 S 2 -type phase as the relatively larger cationic elements were introduced to the system. A series of DFT calculations using the three hypothetical models indicated that a resonance peak near EF in the density of states curves was descended from the relatively flat band structure at several special symmetry points rationalizing the enhanced Seebeck coefficients of Ba 0.94(1) Sr 0.06 Zn 1.86(3) Cd 0.14 Sb 2 and Ba 0.96(1) Sr 0.04 Zn 1.68(2) Cd 0.32 Sb 2 . Electron localization function analysis rationalized the correlation between the polarity change of anionic Zn/Cd–Sb bonds and the charge carrier mobility on the anionic frameworks. Temperature-dependent thermoelectric properties were studied for the four title compounds, and the results proved that the Sr and Cd doping in the title Ba 1–x Sr x Zn 2–y Cd y Sb 2 system successfully enhanced the ZT values through the increased Seebeck coefficients and the reduced total thermal conductivities.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Phase Diagram of Active Brownian Spheres: Crystallization and the Metastability of Motility-Induced Phase Separation

Motility-induced phase separation (MIPS), the phenomenon in which purely repulsive active particles undergo a liquid-gas phase separation, is among the simplest and most widely studied examples of a nonequilibrium phase transition. Here, we show that states of MIPS coexistence are in fact only metastable for three-dimensional active Brownian particles over a very broad range of conditions, decaying at long times through an ordering transition we call active crystallization. At an activity just above the MIPS critical point, the liquid-gas binodal is superseded by the crystal-fluid coexistence curve, with solid, liquid, and gas all coexisting at the triple point where the two curves intersect. Nucleating an active crystal from a disordered fluid, however, requires a rare fluctuation that exhibits the nearly close-packed density of the solid phase. The corresponding barrier to crystallization is surmountable on a feasible timescale only at high activity, and only at fluid densities near maximal packing. The glassiness expected for such dense liquids at equilibrium is strongly mitigated by active forces, so that the lifetime of liquid-gas coexistence declines steadily with increasing activity, manifesting in simulations as a facile spontaneous crystallization at incredibly high activity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Lattice Boltzmann simulation of the dissolution of slag in alkaline solution using real-shape particles

Highlights: • A dissolution numerical model was proposed to capture the real dissolution kinetics of slag in alkaline solution. • The log forward dissolution rate of Si was described as a function of NBO/T and solution pH. • A threshold solid volume fraction of 0.688 was found for a voxel in 3D, 63.8% larger than that for a pixel in 2D. • The proposed dissolution numerical model provides a reliable alternative to study the dissolution kinetics of slag. A dissolution numerical model was proposed in this study to capture the real dissolution kinetics of slag in alkaline solution. It consists of three modules, i.e. (i) simulation of the initial particle parking structure of slag in alkaline solution using real-shape particles of slag, (ii) simulation of the chemical reactions between slag and solution based on the transition state theory, and (iii) simulation of the physical transport of aqueous ions using the lattice Boltzmann method. This dissolution numerical model was verified using experimental results, showing reasonable accuracy. After verification, the dissolution numerical model was implemented to study the influences of temperature and particle shape using a proper recipe of slag in alkaline solution. This recipe was designed to avoid solid phase precipitation or gel formation via thermodynamic analysis. The simulation results showed faster dissolution kinetics of slag when using higher temperatures and more irregular particle shapes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Impact of size and thermal gradient on supercooling of phase change materials for thermal energy storage

Phase change material based thermal energy storage has many current and potential applications in the heating and cooling of buildings, battery and electronics thermal management, thermal textiles, and dry cooling of power plants. However, connecting lab scale thermal data obtained with differential scanning calorimetry (DSC) to the performance of large-scale practical systems has been a major challenge primarily due to the dependence of supercooling on the size and temperature gradient of the system. Here we show how a phase change material’s supercooling behavior can be characterized experimentally using common lab scale thermal analysis techniques. We then develop a statistics based theoretical model that uses the lab-scale data on small samples to quantitatively predict the supercooling performance for a general thermal energy storage application of any size, including also allowing for the possibility of temperature gradients. Finally, we validate the modeling methodology by comparing to experimental results for solid-solid phase change in neopentyl glycol, which shows how the model successfully predicts the changes in supercooling temperature across a large range of cooling rates (2 orders of magnitude) and volumes (3 orders of magnitude). By accounting for thermal gradients, the model avoids ~2x error incurred by lumped approximations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantifying Phospholipids in Organic Samples Using a Hydrophilic Interaction Liquid Chromatography–Inductively Coupled Plasma High-Resolution Mass Spectrometry (HILIC-ICP-HRMS) Method

Here, in this study, a novel method using hydrophilic interaction liquid chromatography (HILIC) coupled with inductively coupled plasma high-resolution mass spectrometry (ICP-HRMS) was introduced for the quantification of phospholipids in oil samples. The method employed a bridged ethyl hybrid (BEH) stationary phase HILIC column with a tetrahydrofuran (THF)/water mobile phase, enhancing the solubility and detection of phospholipids. During the study, a gradient/matrix effect on ICP-HRMS sensitivity was observed and successfully compensated for experimentally, ensuring reliable quantification results. This approach has proven effective for a wide range of different oil samples including vegetable oils, animal fats, and phospholipid supplements. Notably, this method allowed the direct quantification of phospholipids in oil samples, bypassing the need for prior sample preparation methods, such as solid phase extraction (SPE), thereby streamlining the analytical process. The precision, accuracy, and reduced need for extensive sample preparation offered by this method mark a significant advancement in lipids analysis. Its robustness and broad applicability have substantial implications for industries such as food and renewable energy production, where both efficient and accurate lipid identification and quantification are crucial.

09 BIOMASS FUELS↗