SEARCH · Search NASA

Results for “STOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Fuel conservative guidance for shipboard landing of powered-lift STOL aircraft

A computer-simulation study was undertaken to investigate the application of Fuel Conservative Guidance (FCG) techniques, developed at NASA Ames Research Center, to improve the fuel efficiency and minimize recovery time of powered-lift short-takeoff-and-landing (STOL) airplanes operating from aircraft carriers at sea. The FCG system consists of a set of algorithms whose coefficients and parameters limits match those of the Quiet Short-Haul Research Aircraft. When a flightpath is specified by a set of initial conditions for the aircraft and a set of positional waypoints with associated airspeeds, the FCG synthesizes the necessary guidance commands to capture the specified path at any specified waypoint and to optimize fuel consumption and time fo fly along the path. Closed-form expressions are developed for calculating the altitude profile synthesized by the algorithm. Results of this simulation study show that when restrictions on the approach flightpath imposed for manual operation are removed completely, fuel consumption during the approach was reduced by as much as 38 percent (434 lb of fuel) and the time required to fly the flightpath was reduced by as much as 28 percent (209 sec). Savings because of FCG were produced by: (1) shortening the total flight time and distance, and (2) keeping the airspeed high as long as possible to minimize time spent flying in a powered-lift mode.

Warner, D. N., Jr.↗

NASA NTRS1985

Evaluation of an aerodynamic-load prediction method on a STOL fighter configuration

A three-dimensional panel method was used to compute the aerodynamic loads on a large-scale, powered wind tunnel model. The size of the computation grid was selected such that turnaround times, on present computers remained satisfactory. With this constraint, the STOL aircraft configuration was modeled and the capabilities and limitations of the prediction method were investigated. After this study, a similar numerical model was established for a forward-swept-wing aircraft configuration which is planned for large-scale, low-speed testing. The resulting aerodynamic-load predictions are discussed and will be utilized, together with the future experimental results, to obtain a broader validation of this method as well as to reduce the necessary size of the matrix of the test parameters.

Katz, J.↗

NASA NTRS1985

Aerodynamic characteristics of a propulsive wing-canard concept at STOL speeds

A full span model of a wing/canard concept representing a fighter configuration has been tested at STOL conditions in the NASA Langley 4 x 7 meter tunnel. The results of this test are presented, and comparisons are made to previous data of the same configuration tested as a semispan model. The potential of the propulsive wing/canard to develop very high lift coefficients was investigated with several nozzle spans (nozzle aspect ratios). Although longitudinal trim was not accomplished with the blowing distributions and configurations tested, the propulsive wing/canard appears to offer an approach to managing the large negative pitching moments associated with trailing edge flap blowing. Also presented are data showing the effects of large flap deflections and relative wing/canard positions. Presented in the appendix to the report are limited lateral-directional and ground effects data, as well as wing downwash measurements.

Stewart, V. R.↗

NASA NTRS1985

Ground effects on V/STOL and STOL aircraft: A survey

The flow fields encountered by jet- and fan-powered Vertical/Short Takeoff and Landing (V/STOL) aircraft operating in ground effect are reviewed and their general effects on the aerodynamic characteristics are discussed. The ground effects considered include: (1) the suckdown experienced by a single jet configuration in hover; (2) the fountain flow and additional suckdown experienced by multiple jet configurations in hover; (3) the ground vortex generated by jet and jet flap configurations in short takeoff and landing (STOL) operation and the associated aerodynamic and hot-gas-ingestion effects; and (4) the change in the downwash at the tail due to ground proximity. After over 30 years of research on V/STOL aircraft, the general flow phenomena are well-known and, in most areas, the effects of ground proximity can be established or can be determined experimentally. However, there are some anomalies in the current data base which are discussed.

Kuhn, R. E.↗

NASA NTRS1986

Static investigation of two STOL nozzle concepts with pitch thrust-vectoring capability

A static investigation of the internal performance of two short take-off and landing (STOL) nozzle concepts with pitch thrust-vectoring capability has been conducted. An axisymmetric nozzle concept and a nonaxisymmetric nozzle concept were tested at dry and afterburning power settings. The axisymmetric concept consisted of a circular approach duct with a convergent-divergent nozzle. Pitch thrust vectoring was accomplished by vectoring the approach duct without changing the nozzle geometry. The nonaxisymmetric concept consisted of a two dimensional convergent-divergent nozzle. Pitch thrust vectoring was implemented by blocking the nozzle exit and deflecting a door in the lower nozzle flap. The test nozzle pressure ratio was varied up to 10.0, depending on model geometry. Results indicate that both pitch vectoring concepts produced resultant pitch vector angles which were nearly equal to the geometric pitch deflection angles. The axisymmetric nozzle concept had only small thrust losses at the largest pitch deflection angle of 70 deg., but the two-dimensional convergent-divergent nozzle concept had large performance losses at both of the two pitch deflection angles tested, 60 deg. and 70 deg.

Mason, M. L.↗

NASA NTRS1985

Ground effects on V/STOL and STOL aircraft - A survey

The flow fields encountered by jet- and fan-powered Vertical/Short Takeoff and Landing (V/STOL) aircraft operating in ground effect are reviewed and their general effects on the aerodynamic characteristics are discussed. The ground effects considered include (1) the suckdown experienced by a single jet configuration in hover, (2) the fountain flow and additional suckdown experienced by multiple jet configurations in hover, (3) the ground vortex generated by jet and jet flap configurations in Short Takeoff and Landing (STOL) operation and the associated aerodynamic and hot-gas-ingestion effects, and (4) the change in the downwash at the tail due to ground proximity. After over 30 years of research on V/STOL aircraft, the general flow phenomena are well known and, in most areas, the effects of ground proximity can be estimated or can be determined experimentally. However, there are some anomalies in the current data base which are discussed.

Eshlemen, J.↗

NASA NTRS1986

Evaluation of an aerodynamic-load prediction method on a STOL fighter configuration

Katz, J.↗

NASA NTRS1985

The ground effects of a powered-lift STOL aircraft during landing approach

Attention is given to the ground proximity effects of a powered lift STOL aircraft, NASA's Quiet Short Haul Research Aircraft (QSRA); these effects have a profound influence on a landing's touchdown dispersion and sink rates, and must be determined with the greatest possible accuracy. The QSRA flight parameter values obtained by means of a small perturbation model for the trim flight condition out of ground effect, during a landing approach, are compared with flight test values, on the premise that any discrepancies between the two sets of values will be due to ground effect.

Stevens, V. C.↗

NASA NTRS1987

V/STOL and STOL ground effects and testing techniques

The ground effects associated with V/STOL operation were examined and an effort was made to develop the equipment and testing techniques needed for that understanding. Primary emphasis was on future experimental programs in the 40 x 80 and the 80 x 120 foot test sections and in the outdoor static test stand associated with these facilities. The commonly used experimental techniques are reviewed and data obtained by various techniques are compared with each other and with available estimating methods. These reviews and comparisons provide insight into the limitations of past studies and the testing techniques used and identify areas where additional work is needed. The understanding of the flow mechanics involved in hovering and in transition in and out of ground effect is discussed. The basic flow fields associated with hovering, transition and STOL operation of jet powered V/STOL aircraft are depicted.

Kuhn, R. E.↗

NASA NTRS1987

The ground effects of a powered-lift STOL aircraft during landing approach

The effects of ground proximity on a powered lift STOL aircraft are presented. The data are from NASA's Quiet Short Haul Research Aircraft (QSRA) flown at landing approach airspeeds of less than 60 knots with an 80 lb/sq ft wing loading. These results show that the ground effect change in lift is positive and does significantly reduce the touchdown sink rate. These results are compared to those of the YC-14 and YC-15. The change in drag and pitching moment caused by ground effects is also presented.

Stevens, Victor C.↗

NASA NTRS1987

Low speed wind tunnel test of a propulsive wing/canard concept in the STOL configuration. Volume 1: Test description and discussion of results

A propulsive wing/canard model was tested at STOL operating conditions in the NASA Langley Research Center 4 x 7 meter wind tunnel. Longitudinal and lateral/directional aerodynamic characteristics were measured for various flap deflections, angles of attack and sideslip, and blowing coefficients. Testing was conducted for several model heights to determine ground proximity effects on the aerodynamic characteristics. Flow field surveys of local flow angles and velocities were performed behind both the canard and the wing. This is volume 1 of a 2 volume report. The model, instrumentation, and test procedures are described. An analysis of the data is included.

Stewart, V. R.↗

NASA NTRS1987

Low speed wind tunnel test of a propulsive wing/canard concept in the STOL configuration. Volume 2: Test data

A propulsive wind/canard model was tested at STOL operating conditions in the NASA Langley Research Center 4 x 7 meter wind tunnel. Longitudinal and lateral/directional aerodynamic characteristics were measured for various flap deflections, angles of attack and sideslip, and blowing coefficients. Testing was conducted for several model heights to determine ground proximity effects on the aerodynamic characteristics. Flow field surveys of local flow angles and velocities were performed behind both the canard and the wing. This is volume 2 of a 2 volume report. All of the test data in three appendices are presented. Appendix A presented tabulated six component force and moment data, Appendix B presents tabulated wing pressure coefficients, and Appendix C presents the flow field data.

Stewart, V. R.↗

NASA NTRS1987

Development of circulation control technology for powered-lift STOL aircraft

The flow entraining capabilities of the Circulation Control Wing high lift system were employed to provide an even stronger STOL potential when synergistically combined with upper surface mounted engines. The resulting configurations generate very high supercirculation lift in addition to a vertical component of the pneumatically deflected engine thrust. A series of small scale wind tunnel tests and full scale static thrust deflection tests are discussed which provide a sufficient data base performance. These tests results show thrust deflections of greater than 90 deg produced pneumatically by nonmoving aerodynamic surfaces, and the ability to maintain constant high lift while varying the propulsive force from high thrust recovery required for short takeoff to high drag generation required for short low speed landings.

Englar, Robert J.↗

NASA NTRS1988

The characteristics of the ground vortex and its effect on the aerodynamics of the STOL configuration

The interaction of the free stream velocity on the wall jet formed by the impingement of deflected engine thrust results in a rolled up vortex which exerts sizable forces on a short takeoff (STOL) airplane configuration. Some data suggest that the boundary layer under the free stream ahead of the configuration may be important in determining the extent of the travel of the wall jet into the oncoming stream. Here, early studies of the ground vortex are examined, and those results are compared to some later data obtained with moving a model over a fixed ground board. The effect of the ground vortex on the aerodynamic characteristics are discussed.

Stewart, Vearle R.↗

NASA NTRS1990

Civil Applications For New V/STOL and STOL Aircraft

New designs offer benefits in congested urban areas and remote regions. Report explores potential uses in civil aviation of advanced rotorcraft, vertical/short-takeoff-and-landing (V/STOL) aircraft, and short-takeoff-and-landing (STOL) aircraft. Future opportunities overcome formidable geographic barriers and lack of major airport facilities, bringing fast, flexible transportation to remote areas. Aircraft relieves congestion at airports in densely populated areas by utilizing pads and short runways without interfering with large-air-carrier traffic.

Albers, James A.↗

NASA NTRS1990

Dynamic ground-effect measurements on the F-15 STOL and Maneuver Technology Demonstrator (S/MTD) configuration

A moving-model ground-effect testing method was used to study the influence of rate-of-descent on the aerodynamic characteristics for the F-15 STOL and Maneuver Technology Demonstrator (S/MTD) configuration for both the approach and roll-out phases of landing. The approach phase was modeled for three rates of descent, and the results were compared to the predictions from the F-15 S/MTD simulation data base (prediction based on data obtained in a wind tunnel with zero rate of descent). This comparison showed significant differences due both to the rate of descent in the moving-model test and to the presence of the ground boundary layer in the wind tunnel test. Relative to the simulation data base predictions, the moving-model test showed substantially less lift increase in ground effect, less nose-down pitching moment, and less increase in drag. These differences became more prominent at the larger thrust vector angles. Over the small range of rates of descent tested using the moving-model technique, the effect of rate of descent on longitudinal aerodynamics was relatively constant. The results of this investigation indicate no safety-of-flight problems with the lower jets vectored up to 80 deg on approach. The results also indicate that this configuration could employ a nozzle concept using lower reverser vector angles up to 110 deg on approach if a no-flare approach procedure were adopted and if inlet reingestion does not pose a problem.

Kemmerly, Guy T.↗

NASA NTRS1992

HUD Guidance for the ASKA Experimental STOL Aircraft using Radar Position Information

The paper describes a high performance HUD guidance system installed on the experimental powered-lift STOL aircraft Aska. Since the maiden flight in October 1985, the HUD system has been used in all the flight tests. The HUD has an accurate flight path symbol generated by inertial velocity from the IRS which is updated by up-linked precision radar position data. The flight path symbol is very useful for precise approach and flare control for Aska which has large ground effects. A synthetic runway is also presented, which is conformal with the real runway, using the position data from the ground tracking radar system. Under instrument meteorological conditions, the pilot can approach and land using the HUD synthetic runway as well as in visual meteorological conditions. The HUD system proved to be a valuable aid to the pilot for all the Aska flight tests. A NASA Ames Research Center test pilot demonstrated touch down accuracy of less than 8 meters (peak to peak) for a series of three landings.

Yazawa, Kenji↗

NASA NTRS1994

Flight investigation of the use of a nose gear jump strut to reduce takeoff ground roll distance of STOL aircraft

A series of flight tests was conducted to evaluate the reduction of takeoff ground roll distance obtainable from a rapid extension of the nose gear strut. The NASA Quiet Short-haul Research Aircraft (QSRA) used for this investigation is a transport-size short takeoff and landing (STOL) research vehicle with a slightly swept wing that employs the upper surface blowing (USB) concept to attain the high lift levels required for its low speed, short-field performance. Minor modifications to the conventional nose gear assembly and the addition of a high pressure pneumatic system and a control system provided the extendible nose gear, or 'jump strut,' capability. The limited flight test program explored the effects of thrust-to-weight ratio, storage tank initial pressure, and control valve open time duration on the ground roll distance. The data show that the predicted reduction of takeoff ground roll on the order of 10 percent was achieved with the use of the jump strut. Takeoff performance with the jump strut was also found to be essentially independent of the pneumatic supply pressure and was only slightly affected by control valve open time within the range of the parameters examined.

Eppel, Joseph C.↗