Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sample selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Finding the rarest objects in the universe: A new, efficient method for discovering BL Lacertae objects

We present a new, efficient method for discovering new BL Lac Objects based upon the results of the Einstein Extended Medium Sensitivity Survey (EMSS). We have found that all x-ray selected BL Lacs are radio emitters, and further, that in a 'color-color' diagram (radio/optical and optical/x-ray) the BL Lac Objects occupy an area distinct from both radio loud quasars and the radio quiet QSOs and Seyferts which dominate x-ray selected samples. After obtaining radio counterparts via VLA 'snapshot' observations of a large sample of unidentified x-ray sources, the list of candidates is reduced. These candidates then can be confirmed with optical spectroscopy and/or polarimetry. Since greater than 70 percent of these sources are expected to be BL Lacs, the optical observations are very efficient. We have tested this method using unidentified sources found in the Einstein Slew Survey. The 162 Slew Survey x-ray source positions were observed with the VLA in a mixed B/C configuration at 6 cm resulting in 60 detections within 1.5 position error circle radii. These x-ray/optical/radio sources were then plotted, and 40 BL Lac candidates were identified. To date, 10 candidates have been spectroscopically observed resulting in 10 new BL Lac objects! Radio flux, optical magnitude, and polarization statistics (obtained in white light with the Steward Observatory 2.3 m CCD polarimeter) for each are given.

Stocke, John↗

Simultaneous mapping of the unsteady flow fields by Particle Displacement Velocimetry (PDV)

Current experimental and computational techniques must be improved in order to advance the prediction capability of the longitudinal vortical flows shed by underwater vehicles. The generation, development, and breakdown mechanisms of the shed vortices at high Reynolds numbers are not fully understood. The ability to measure hull separated vortices associated with vehicle maneuvering does not exist at present. The existing point-by-point measurement techniques can only capture approximately the large 'mean' eddies but fail to meet the dynamics of small vortices during the initial stage of generation. A new technique, which offers a previously unavailable capability to measure the unsteady cross-flow distribution in the plane of the laser light sheet, is called Particle Displacement Velocimetry (PDV). PDV consists of illuminating a thin section of the flowfield with a pulsed laser. The water is seeded with microscopic, neutrally buoyant particles containing imbedded fluorescing dye which responds with intense spontaneous fluorescence with the illuminated section. The seeded particles in the vortical flow structure shed by the underwater vehicle are illuminated by the pulse laser and the corresponding particle traces are recorded in a single photographic frame. Two distinct approaches were utilized for determining the velocity distribution from the particle traces. The first method is based on matching the traces of the same particle and measuring the distance between them. The direction of the flow can be identified by keeping one of the pulses longer than the other. The second method is based on selecting a small window within the image and finding the mean shift of all the particles within that region. The computation of the auto-correlation of the intensity distribution within the selected sample window is used to determine the mean displacement of particles. The direction of the flow is identified by varying the intensity of the laser light between pulses. Considerable computational resources are required to compute the auto-correction of the intensity distribution. Parallel processing will be employed to speed up the data reduction. A few examples of measured unsteady vortical flow structures shed by the underwater vehicles will be presented.

Huang, Thomas T.↗

Hypervelocity impact facility for simulating materials exposure to impact by space debris

As a result of man's venturing into space, the local debris contributed by his presence exceeds, at some orbital altitudes, that of the natural component. Man's contribution ranges from fuel residue to large derelect satellites that weigh many kilograms. Current debris models are able to predict the growth of the problem and suggest that spacecraft must employ armor or bumper shields for some orbital altitudes now, and that, the problem will become worse as a function of time. The practical upper limit to the velocity distribution is on the order of 40 km/s and is associated with the natural environment. The maximum velocity of the man-made component is in the 14-16 km/s range. The Long Duration Exposure Facility (LDEF) has verified that the 'high probability of impact' particles are in the microgram to milligram range. These particles can have significant effects on coatings, insulators, and thin metallic layers. The surface of thick materials becomes pitted and the local debris component is enhanced by ejecta from the debris spectrum in a controlled environment. The facility capability is discussed in terms of drive geometry, energetics, velocity distribution, diagnostics, and projectile/debris loading. The facility is currently being used to study impact phenomena on Space Station Freedom's solar array structure, other solar array materials, potential structural materials for use in the station, electrical breakdown in the space environment, and as a means of clarifying or duplicating the impact phenomena on the LDEF surfaces. The results of these experiments are described in terms of the mass/velocity distribution incident on selected samples, crater dynamics, and sample geometry.

Rose, M. F.↗

Circumprotostellar environments. I - Molecular outflows from protostar candidates in Taurus

We report on the search for molecular outflows from a complete, flux-limited, IRAS-selected sample of cold, low-mass protostar candidates located in the Taurus cloud complex. We find that 18 of the 24 sources have outflows associated with them, only four of which have been previously reported, implying that these sources are predominantly protostars in an early stage of evolution. We argue that at least a few of the outflows are very small in extent, indicating that their dynamical ages are less than a few thousand years.

Moriarty-Schieven, G. H.↗

Evolution of the X-ray luminosity function of AGN

The HEAO A1 X-ray survey has detected a large number of active galactic nuclei and quasars, as recently identified using results from the HEAO A3 experiment. The sample shows some incompleteness and is not completely identified, so these effects are taken out in the analysis by correcting the effective coverage of the survey. Preliminary analysis indicates that significant evolution can be detected in these data and that the evolution rate appears stronger than that inferred from a sample selected at lower energies.

Marshall, Herman L.↗

The local density of halo giants

A new estimate of the local density of halo giants - 36 +/- 7 with M(V) less than 0.5 per cu kpc - is presented. This number is derived from an objective-prism survey for nearby metal-weak stars, and so is free from many of the assumptions needed to derive the local halo density in the traditional way, from high proper motion surveys. This number agrees well with estimates of the local density of halo horizontal-branch stars, but is approximately a factor of 2 smaller than the density derived by Bahcall and Casertano (1986). This may be due to the inclusion of some thick disk stars in their proper-motion selected sample. The halo density derived from giants can be expressed as a disk-to-halo ratio of 850:1 (+/- 35 percent). Using these results, a simple model is built to predict numbers of halo giants in specified directions in the Galaxy. It is shown that it performs much better than the Bahcall-Soniera model, in the specific case of halo giants. The surface brightness due to the halo at the solar radius is calculated to be 27.7 V magnitudes per sq arcsec, if the Galaxy was viewed from the outside, edge-on, thus raising the possibility of detecting light from halo field stars in other galaxies similar to our own.

Morrison, Heather L.↗

Computational simulation of hot composite structures

Three different computer codes developed in-house are described for application to hot composite structures. These codes include capabilities for: (1) laminate behavior (METCAN); (2) thermal/structural analysis of hot structures made from high temperature metal matrix composites (HITCAN); and (3) laminate tailoring (MMLT). Results for select sample cases are described to demonstrate the versatility as well as the application of these codes to specific situations. The sample case results show that METCAN can be used to simulate cyclic life in high temperature metal matrix composites; HITCAN can be used to evaluate the structural performance of curved panels as well as respective sensitivities of various nonlinearities, and MMLT can be used to tailor the fabrication process in order to reduce residual stresses in the matrix upon cool-down.

Chamis, C. C.↗

Traditional anthropology and geographical information systems in the collaborative study of Cassava in Africa

Cross-cultural, village-level, and farmer surveys have been used with a geographical information system to describe the distribution and relative importance of cassava (manioc, yuca, Manihot esculenta) in its cultural, economic, and ecological contexts. It presents examples of data management for mapping, sample selection, cross-tabulation of characteristics, combination of data types for indices and hypothesis testing. The methods used are reviewed, and some of the main conclusions of the study are presented.

Romanoff, Steven↗

Quantitative method of measuring cancer cell urokinase and metastatic potential

The metastatic potential of tumors can be evaluated by the quantitative detection of urokinase and DNA. The cell sample selected for examination is analyzed for the presence of high levels of urokinase and abnormal DNA using analytical flow cytometry and digital image analysis. Other factors such as membrane associated urokinase, increased DNA synthesis rates and certain receptors can be used in the method for detection of potentially invasive tumors.

Morrison, Dennis R.↗

Further analyses of Rio Cuarto impact glass

Initial analyses of the geologic setting, petrology, and geochemistry of glasses recovered from within and around the elongate Rio Cuarto (RC) craters in Argentina focused on selected samples in order to document the general similarity with impactites around other terrestrial impact craters and to establish their origin. Continued analysis has surveyed the diversity in compositions for a range of samples, examined further evidence for temperature and pressure history, and compared the results with experimentally fused loess from oblique hypervelocity impacts. These new results not only firmly establish their impact origin but provide new insight on the impact process.

Schultz, Peter H.↗

Bayes classification of interferometric TOPSAR data

We report the Bayes classification of terrain types at different sites using airborne interferometric synthetic aperture radar (INSAR) data. A Gaussian maximum likelihood classifier was applied on multidimensional observations derived from the SAR intensity, the terrain elevation model, and the magnitude of the interferometric correlation. Training sets for forested, urban, agricultural, or bare areas were obtained either by selecting samples with known ground truth, or by k-means clustering of random sets of samples uniformly distributed across all sites, and subsequent assignments of these clusters using ground truth. The accuracy of the classifier was used to optimize the discriminating efficiency of the set of features that was chosen. The most important features include the SAR intensity, a canopy penetration depth model, and the terrain slope. We demonstrate the classifier's performance across sites using a unique set of training classes for the four main terrain categories. The scenes examined include San Francisco (CA) (predominantly urban and water), Mount Adams (WA) (forested with clear cuts), Pasadena (CA) (urban with mountains), and Antioch Hills (CA) (water, swamps, fields). Issues related to the effects of image calibration and the robustness of the classification to calibration errors are explored. The relative performance of single polarization Interferometric data classification is contrasted against classification schemes based on polarimetric SAR data.

Michel, T. R.↗

Colors and color gradients in bulges of galaxies

We have obtained surface photometry in U, B, R, and I for a complete optically selected sample of 45 early-type spiral galaxies, to investigate the colors and color gradients of spiral bulges. Color profiles in U-R, B-R, U-B, and R-I have been determined in wedges opening on the semiminor axes. Based on several criteria, like the smoothness of the color profiles, the absence of dust lanes, and the central colors, we have defined a subsample of 18 objects whose colors are largely unaffected by dust. We believe such colors are suitable for inferring properties of the stellar populations of bulges. We find that the colors of bulges are predominantly bluer than those of ellipticals. This result holds even when bulges are compared to ellipticals of the same luminosity, and indicates that bulges are younger and/or more metal poor than old elliptical galaxies. Most bulges do not reach solar metallicities. Bulges show predominantly negative color gradients (bluer outward). For bright bulges (M(sup Bulge sub R) is less than -20.0), the magnitude of the gradient increases with bulge luminosity. For fainter bulges, gradients scatter around large negative values. The behavior of color gradients as a function of bulge luminosity suggests different formation mechanisms for faint and bright spheroids. For bright bulges, the scaling of gradients with luminosity suggests a formation process involving dissipation. The similarity with ellipticals suggests that the formation of the disk did not affect the stellar populations of the bulge in a major way. For small bulges (M(sub R) is greater than -20), the existence of pronounced color gradients suggests a different formation mechanism. For these objects, the presence of the disk may have severely affected the radial population distribution in the bulge.

Balcells, Marc↗

Searching for cluster magnetic fields in the cooling flows of 0745-191, A2029, and A4059

We have performed sensitive polarimetric radio observations with the Very Large Array (VLA) of three galaxies: PKS 0745-191, PKS 1508+059, and PKS 2354-350, embedded in x-ray cooling flow clusters. High sensitivity, multifrequency maps of all three, along with spectral index and Faraday rotation measure (RM) maps of PKS 1508+059 and PKS 2354-350 are presented. For PKS 1508+059 and PKS 2354-350 models of the electron density of the intracluster medium (ICM) have been used to set lower limits of 0.1 and 2.7 microG, respectively, on the magnetic field in the ICM based on the observed RMs. In an x-ray selected sample of cooling flow clusters with an associated radio source, 57% (8/14) are found to have absolute RMs in excess of 800 radians/sq m. This sample includes the three sources of this study and all the other high RM sources found to date at zeta less than 0.4. These facts are consistent with the high RM phenomenon being produced by magnetic fields associated with the relatively dense, hot x-ray gas in cooling flow clusters.

Taylor, Gregory B.↗

Circumprotostellar environments. 2: Envelopes, activity, and evolution

We have obtained 800 and 1100 micron photometric observations of a complete, flux-limited, IRAS-selected sample of cold sources in Taurus, whose infrared and molecular properties indicate them to be low-mass protostars which are younger than T Tauri stars. The goal of this study is to understand the role of the circumstellar envelope and disk during low-mass star formation and to search for signs of evolution. We find a good correlation between the submillimeter flux density (as well as of envelope mass) with both the mechanical luminosity of the molecular outflow and with the far-infrared luminosity, presumably produced by accretion onto the protostar. This suggests that the mass of the disk/envelope may be linked to the rate of accretion onto the protostar and to the generation of outflows. However, in contrast to the results of Cabrit & Andre (1991) we see no evidence for a lower limit to the disk/envelope mass which can produce outflow. We also find a significant difference between the spectral energy distributions at submillimeter wavelengths of embedded protostars compared to optically visible T Tauri stars. The more evolved (T Tuari) objects tend to have shallower spectral indices than embedded sources, suggesting (1) an evolution of dust grains, and/or (2) a more compact envelope and optically thick disk in the older objects.

Moriarty-Schieven, G. H.↗

The Hawaii K-band galaxy survey. 1: Deep K-band imaging

We present the results of a very deep K-band survey with a 5 sigma total galaxy magnitude limit of K = 21.9 in the deepest field. A 5 sigma K-band-selected sample of 123 galaxies is presented, together with their optical colors. Only three galaxies in this sample are not detected at the 1 sigma level in Kron-Cousins I band. At K less than or = 20 the reddest (I-K) color is 5.1 +/- 0.4, and 15 of the 123 objects in the deep field sample have (I-K) greater than 4. In the blue, the galaxies show a rapid blueward trend at magnitudes beyond K = 19, dropping from a median (B-K) = 6 at K = 18 to a median (B-K) of only 4.2 at K = 21.5. The surface density of (I-K) greater than 4 objects is interpreted to imply either that there is a significant evolution toward later types in the colors of the normal galaxy population beyond z = 11 or that galaxies have faded by that redshift.

Cowie, L. L.↗

First Estimates of the Radiative Forcing of Aerosols Generated from Biomass Burning Using Satellite Data

Collocated measurements from the Advanced Very High Resolution Radiometer (AVHRR) and the Earth Radiation Budget Experiment (ERBE) scanner are used to examine the radiative forcing of atmospheric aerosols generated from biomass burning for 13 images in South America. Using the AVHRR, Local Area Coverage (LAC) data, a new technique based on a combination of spectral and textural measures is developed for detecting these aerosols. Then, the instantaneous shortwave, longwave, and net radiative forcing values are computed from the ERBE instantaneous scanner data. Results for the selected samples from 13 images show that the mean instantaneous net radiative forcing for areas with heavy aerosol loading is about -36 W/sq m and that for the optically thin aerosols are about -16 W/sq m. These results, although preliminary, provide the first estimates of radiative forcing of atmospheric aerosols from biomass burning using satellite data.

Christopher, Sundar A.↗

First Estimates of the Radiative Forcing of Aerosols Generated from Biomass Burning using Satellite Data

Collocated measurements from the Advanced Very High Resolution Radiometer (AVHRR) and the Earth Radiation Budget Experiment (ERBE) scanner are used to examine the radiative forcing of atmospheric aerosols generated from biomass burning for 13 images in South America. Using the AVHRR, Local Area Coverage (LAC) data, a new technique based on a combination of spectral and textural measures is developed for detecting these aerosols. Then, the instantaneous shortwave, longwave, and net radiative forcing values are computed from the ERBE instantaneous scanner data. Results for the selected samples from 13 images show that the mean instantaneous net radiative forcing for areas with heavy aerosol loading is about -36 W/sq m and that for the optically thin aerosols are about -16 W/sq m. These results, although preliminary, provide the first estimates of radiative forcing of atmospheric aerosols from biomass burning using satellite data.

Chistopher, Sundar A.↗

Kinematics and M(sub v) calibration of K and M dwarf stars using Hipparcos data

The luminosities and kinematics of lower main sequence stars in a spectroscopically selected sample covering spectral types K 3 to M 5 are determined using Hipparcos parallaxes and proper motions. The stars separate into two kinematically distinct components, called young disk and old disk components. The young component has velocity dispersion (30, 17, 12) km/s in the U, V and W directions, respectively, and features an asymmetric drift of 8 km/s, a vertex deviation of 10 +/- 3 deg and an absolute magnitude of 10.48 mag at color (R - I)(sub Kron) = 1.0 mag. The respective features of the old component are: (56, 34, 31) km/s, 28 km/s and 0.6 mag at the same color. The slope and intrinsic width of the magnitude calibration of each component are determined. The analysis is used to investigate the possible presence of residual systematic discrepancies of the model with Hipparcos data. There are indications of a possible underestimation of the parallax errors.

Upgren, A. R.↗