Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation and Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Instrumented Photovoltaic Modules for Environmental Characterization and Simulation Model Validation

Photovoltaic modules are subjected to various mechanical stressors in their deployment environments, ranging from installation handling to wind and snow loads. Damage incurred during these mechanical events has the potential to initiate subsequent degradation mechanisms, reducing useful module lifespan. Thus, characterizing the mechanical state of photovoltaic modules is pertinent to the development of reliable packaging designs. In this work, photovoltaic modules with strain gauges directly incorporated into the module laminate were fabricated and subjected to mechanical loading to characterize internal strains within the module when under load. These experimental measurements were then compared against results obtained by high-fidelity finite-element simulations. The simulation results showed reasonable agreement in the strain values over time; however, there were large discrepancies in the magnitudes of these strains. Both the instrumentation technique and the finite-element simulations have areas where they can improve. These areas of improvement have been documented. Despite the observed discrepancies between the experimental and simulated results, the module instrumentation proved to be a useful gauge in monitoring and characterizing the mechanical state. With some process improvements, this method could potentially be applied to other environments that a photovoltaic module will encounter in its lifetime that are known to cause damage and degrade performance.

14 SOLAR ENERGY↗

A Detailed Vehicle Modeling & Simulation Study Quantifying Energy Consumption and Cost Reduction of Advanced Vehicle Technologies Through 2050

The U.S. Department of Energy (DOE) Vehicle Technologies Office (VTO) and Hydrogen and Fuel Cell Technologies Office (HFTO) aim to develop sustainable, affordable, and efficient technologies for transportation of goods and people. Translating investments in advanced transportation component technologies and powertrains to estimate vehicle-level fuel savings potential is critical for understanding DOE’s impact. In this work, we simulated technologies funded by VTO and HFTO for light duty vehicles. The simulations were performed across: (1) Multiple powertrain configurations (conventional, power-split, extended-range electric vehicle, battery electric drive, and fuel-cell vehicles); (2) Vehicle classes (compact car, midsize car, small sport utility vehicle [SUV], midsize SUV, and pickup trucks); and (3) Fuels (gasoline, diesel, natural gas, hydrogen, and battery electricity). These various technologies are assessed for six different timeframes: laboratory years 2015 (reference), 2020, 2025, 2030, and 2045. A delay of five years is assumed between laboratory year and model year (the year the technology is introduced into production).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Development and assessment of a physics-based simulation model to investigate residential PM 2.5 infiltration across the US housing stock

The Lawrence Berkeley National Laboratory Population Impact Assessment Modeling Framework (PIAMF) was expanded here to enable determination of indoor PM 2.5 concentrations and exposures in a set of 50,000 homes representing the US housing stock. A mass-balance model is used to calculate time-dependent pollutant concentrations within each home. The model includes size- and species-dependent removal mechanisms. The particle model was applied to the housing samples of the Relationship of Indoor, Outdoor, and Personal Air (RIOPA) and The Detroit Exposure and Aerosol Research Study (DEARS) studies to compare model- and measurement-based estimates of indoor PM 2.5 of outdoor origin. Model-derived distributions of infiltration factors (ratio of indoor PM 2.5 of outdoor origin to outdoor PM 2.5 ) are compared to measurement-based distributions obtained in studies conducted in 11 US cities.

42 ENGINEERING↗

Modeling, Simulation, and Experimental Verification of a 20-kW Series-Series Wireless Power Transfer System for a Toyota RAV4 Electric Vehicle

Wireless power transfer is going to play a major role in transportation electrification due the convenience, flexibility, safety, and high-efficiency. Achieving high power levels is important in order to reduce the charge times and provide more convenience to electric vehicle (EV) owners while keeping the efficiency high and electric and electromagnetic field emissions lower than the limits set by the international guidelines. This study presents a 20-kW wireless charging system designed for a Toyota RAV4 electric vehicle for stationary charging with a dc-to-dc (high-frequency inverter input to the vehicle battery terminals) efficiency exceeding 95% over four power conversion stages. Additionally, the modeling, analysis, and sensitivity of the wireless charging system are presented for series-series resonant tuning configuration.

Onar, Omer↗

Experimental validation of multiphysics model simulations of the thermal response of a cement clinker rotary kiln at laboratory scale

Abstract An increasing demand for buildings, transportation systems and civil infrastructure development has driven expansion of cement consumption world‐wide, producing a significant increase in related global energy demand. With approximately 7% of the world‐wide industrial energy consumption (10.7 exajoules [EJ]), the cement industry is the third most energy intensive industrial processes and a key component for concrete, the most consumed composite material in the global construction industry. In cement manufacturing, the cement kiln accounts for most of the energy consumption in the production process. As the heart of a cement plant, the cement kiln is where the kiln feed primarily containing calcium oxide (CaO), silica (SiO 2 ), alumina (Al 2 O 3 ), and iron (Fe 2 O 3 ) are thermally and chemically transformed into clinker minerals. The presented work developed a multiphysics model, designed and built a laboratory‐scale rotary cement clinker kiln, and produced cement clinker at laboratory‐scale. The model was developed to study the interaction between the various thermal, fluid dynamic and chemical interactions involved in the sintering process used to form Portland cement clinker in an effort to reduce energy use. The analytical model was validated through experimental testing using a unique laboratory‐scale rotary cement kiln developed during the investigation. Also demonstrated was the feasibility of producing clinker at laboratory scale. This modeling and lab scale tests were designed to better understand the clinker sintering process so that operational and quality decisions can be made to optimize energy consumption without compromising cement clinker quality. The computational fluid dynamics modeling was developed in COMSOL Multiphysics 6.0. The characteristics of the combustion fluid flow, concentration of species, temperature and heat transfer were studied for a turbulent flow of methane (CH 4 ) gas and oxygen (O 2 ). Theory suggests that heat transfer impacts the cement production process but the multiphysics model more accurately describes the convection, conduction, and radiant heat transfer in the kilning process and thus allows for a better understanding of the energy exchange driving the chemical reactions that produce Portland cement. Clinker minerals were formed because of appropriate burning conditions implemented during experimental model validation.

Tabares, Juan David↗

Computational Modeling, Simulation and Analysis of the RPI Walthousen Reactor Critical Facility (RCF)

The Walthousen Reactor Critical Facility (RCF), located in Schenectady, New York, is currently owned and operated by Rensselaer Polytechnic Institute (RPI). The facility was originally constructed by the American Locomotive Company (ALCO) for the research and development of small, portable reactors. Originally designed for highly-enriched uranium fuel, the prototype reactor first came online in August 26, 1956, and was transferred to RPI ownership in 1963. Several changes to the reactor's design and operation have been made, the most notable of which was the conversion from high-enriched uranium to low-enriched uranium fuel. The RCF is an open-pool critical assembly that operates at a low power with a license limit of less than 100 watts. This low operating power permits a much greater flexibility in configuration and operation as compared to other research reactors. Because of this, experiments may be designed that would be unfeasible for research reactors that operate at much higher powers. The RCF's functional capabilities provide opportunities to perform several reactor experiments and measurements, such as: core criticality experiments, differential and integral rod worth measurements, moderator temperature coefficient of reactivity calculations, critical rod height and critical water height measurements, etc.. These experiments are regularly performed in conjunction with RPI course-work education and Senior Reactor Operator (SRO) training. The unique capabilities and experiments that may be performed in the RCF are particularly useful for validating certain aspects of computational analysis codes. A computational model of the RCF reactor has been previously generated and validated using the Monte Carlo N-Particle (MCNP) code. For the purpose of future experiments, this model is also being adapted for use with the SHARP Toolset, which includes the PROTEUS neutronics code, the Nek5000 fluid dynamics code, and the Diablo structural mechanics code. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Computational Modeling, Simulation, and Potential Applications of Optical Stochastic Cooling

With the rising demand for intense particles beams, much research is being conducted in the area of particle beam cooling. One of these methods, called Stochastic Cooling (SC) (developed at CERN in the 1970's), delivered a feedback method to improve the quality and lifetime of circulating proton beams by reducing their 6D phase-space and has been widely implemented in a number of hadron machines. However, traditional stochastic cooling schemes are limited by the bandwidth of microwave frequency systems. Optical Stochastic Cooling (OSC) is a promising extension of the stochastic cooling beam cooling technique. OSC instead uses optical wavelengths which allows for improved control and increased cooling but creates its own technical challenges. This lays out work conducted toward the experimental demonstration of OSC at Fermilab's Integrable Optics Test Accelerator (IOTA) storage ring. This includes the design and characterization of parts of the optical delay system, the development and validation of a high-fidelity computational model of the OSC process, and the investigations into possible applications of the OSC mechanism to advanced beam manipulations.

43 PARTICLE ACCELERATORS↗

Using system-of-systems simulation modeling and analysis to measure energy KPP impacts for brigade combat team missions.

The Department of Defense's (DoD) Energy Posture identified dependence of the US Military on fossil fuel energy as a key issue facing the military. Inefficient energy consumption leads to increased costs, effects operational performance and warfighter protection through large and vulnerable logistics support infrastructures. Military's use of energy is a critical national security problem. DoD's proposed metrics Fully Burdened Cost of Fuel and Energy Efficiency Key Performance Parameter (FBCF and Energy KPP) are a positive step to force energy use accountability onto Military programs. The ability to measure impacts of sustainment are required to fully measure Energy KPP. Sandia's work with Army demonstrates the capability to measure performance which includes energy constraint.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Patterning via optical-saturable transformations: A review and simple simulation model

Most of the nanoscale fabrication in the semiconductor industry is based on patterning with scanning-electron beam lithography (SEBL). Although this approach is very versatile and has very high resolution, it is intrinsically a serial writing process, and therefore, relatively slow. Our group has been investigating alternative nano-fabrication techniques, adapted from ideas of saturating optical transitions such as those used in stimulated emission-depletion microscopy and related methods, and optical interference lithography. Linewidths and resolutions on the scale of a few tens of nanometers and below are highly desirable for various applications in nanotechnology. However, the spatial resolution of optical lithography is restricted by diffraction. In the past, we developed absorbance modulation to overcome this limit. This approach utilizes photochromic molecules that can be optically switched between two thermally stable states, one opaque and the other transparent. However, absorbance modulation is limited to surface (2-D) patterning. Here, we report on an alternative approach that exploits unique combinations of spectrally selective reversible and irreversible photochemical transitions to achieve deep subwavelength resolution with potential extension to 3-dimensions. This approach, which we refer to as patterning via optical-saturable transformations have the potential for massive parallelism, enabling the creation of nanostructures and devices at a speed far surpassing what is possible with SEBL. The aim of our research is to translate the success in circumventing Abbe's diffraction limit in optical microscopy to optical lithography.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗