Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stiff”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1930

Pressure element of constant logarithmic stiffness for temperature compensated altimeter

The usual type of altimeter contains a pressure element, the deflections of which are approximately proportional to pressure changes. An evenly divided altitude scale is secured by using a mechanism between the pressure element and pointer which gives the required motion of the pointer. A temperature-compensated altimeter was constructed at the Bureau of Standards for the Bureau of Aeronautics of the Navy Department which contained a manually operated device for controlling the multiplication of the mechanism to the extent necessary for temperature compensation. The introduction of this device made it difficult to adjust the multiplying mechanism to fit an evenly divided altitude scale. To meet this difficulty a pressure element was designed and constructed which gave deflections which were proportional to altitude; that is, to the logarithm of the pressure. The element consisted of a metal bellows of the sylphon type coupled to an internal helical spring which was designed so as to have a variable number of active coils. This report presents a description of and laboratory data relating to the special pressure element for the altimeter. In addition equations which apply generally to springs and pressure elements of constant logarithmic stiffness are developed, including the deflection and the spacing between the coils in terms of the constants of the helical spring and pressure elements. (author)

Brombacher, W G↗
NASA NTRS1957

Torsional stiffness of thin-walled shells having reinforcing cores and rectangular, triangular, or diamond cross section

A theoretical investigation has been made of the Saint-Venant torsion of certain composite bars. These bars are composed of two materials -- one material in the form of a thin-walled cylindrical shell and the other material in the form of a core which fills the interior of the shell and is bonded to it. An approximate boundary-value problem is formulated on assumptions similar to those of the theory of torsion of hollow thin-walled shells (Bredt theory). This boundary-value problem is solved exactly for a rectangular cross section and approximately for slender triangular and diamond cross sections. Results for the torsional stiffness constants are presented graphically.

Mccomb, Harvey G , Jr↗
NASA NTRS1994

Changing Stiffnesses Of Truss Members For Vibration Tests

Extension of active-member method of vibration testing of trusses and similar structures proposed to obtain additional data for refinement of finite-element mathematical models of vibrational properties of structures. Active truss members not only used in vibration tests to excite and measure vibrations of structures, but also made to have different effective stiffnesses in some tests, enabling excitation of different vibrational modes yielding additional data. Aspects of active-member method of vibration testing described previously in articles in NASA Tech Briefs including "Two Techniques for Suppressing Vibrations in Structures" (NPO-17889), "Active Suppression of Vibrations in a Truss" (NPO-18305), and "Active Members Excite and Measure Vibrations in Trusses" (NPO-18353).

Wada, Ben K.↗
NASA NTRS1994

Verifying Stiffness Parameters Of Filament-Wound Cylinders

Predicted engineering stiffness parameters of filament-wound composite-material cylinders verified with respect to experimental data, by use of equations developed straightforwardly from applicable formulation of Hooke's law. Equations derived in engineering study of filament-wound rocket-motor cases, also applicable to other cylindrical pressure vessels made of orthotropic materials.

Verderaime, V.↗
NASA NTRS1990

Shape optimization for maximum stability and dynamic stiffness

Any optimization of structures for maximum stability or for maximum dynamic stiffness deals with an eigenvalue problem. The goal of this optimization is to raise the lowest eigenvalue (or eigenvalues) of the problem to its highest (optimal) level at a constant volume of the structure. Likely the lowest eigenvalue may be either inherently multi-modal or it can become multi-modal as a result of the optimization process. The multimodeness introduces some ambiguity to the eigenvalue problem and make the optimization difficult to handle. Thus far, only the simplest cases of multi-modal structures have been effectively optimized using rather elaborate analytical methods. Numerous publications report design of a minimum volume structure with different eigenvalues constraints, in which, however, the modality of the problem is assumed a priori. The method presented here utilizes a multi-modal optimality criteria and allows for inclusion of an arbitrary number of buckling or vibrations modes which might influence the optimization process. The real multi-modality of the problem, that is the number of modes participating in the final optimal design is determined iteratively. Because of a natural use of the FEM technique the method is easy to program and might be helpful in design of large flexible space structures.

Szyszkowski, W.↗
NASA NTRS1994

Hydrodynamics of binary coalescence. 1: Polytropes with stiff equations of state

We performed a series of three-dimensional hydrodynamic calculations of binary coalescence using the smoothed particle hydrodynamics (SPH) method. The initial conditions are exact polytropic equilibrium configurations on the verge of dynamical instability. We consider synchronized equilbria only and concentrate on stiff equations of state, with adiabatic Gamma greater than 5/3. We assume that the polytropic constants (K identically equal to P/(rho(exp Gamma)) are the same for both components. These conditions apply well to models of neutron star binaries. Accordingly, we discuss our results in the context of the Laser Interferometer Gravitational-Wave Observatory (LIGO) project, and we calculate the emission of gravitational radiation in the quadruple approximation. The fully nonlinear development of the instability is followed using SPH until a new equilibrium configuration is reached by the system. We find that the properties of this final configuration depend sensitively on both the compressibility and mass ratio. An axisymmetric merged configuration is always produced when the adiabatic exponent Gamma approximately less than 2.3. As a consequence, the emission of gravitational radiation shuts off abruptly right after the onset of dynamical instability. In contrast, triaxial merged configurations are obtained when Gamma approximately greater than 2.3, and the system continues to emit gravitational waves after the final coalescence. Systems with mass ratios q not equal to 1 typically become dynamically unstable before the onset of mass transfer. Stable mass transfer from one neutron star to another in a close binary is therefore probably ruled out. For a mass ratio q approximately less than 0.5, however, dynamical mass transfer can temporarily retard the coalescence by causing a rapid reexpansion of the binary into a new, slightly eccentric but dynamically stable orbit. The maximum amplitude h(sub max) and peak luminosity L(sub max) of the gravitational waves emitted during the final coalescence are nearly independent of Gamma, but depend sensitively on the mass ratio q. The approximate scalings we find are h(sub max) varies as q(exp 2) and L(sub max) varies as q(exp 6) for q close to unity.

Rasio, Frederic A.↗
NASA NTRS1995

Comparison of Nonequilibrium Solution Algorithms Applied to Chemically Stiff Hypersonic Flows

Three solution algorithms, explicit under-relaxation, point implicit, and lower-upper symmetric Gauss-Seidel, are used to compute nonequilibrium flow around the Apollo 4 return capsule at the 62-km altitude point in its descent trajectory. By varying the Mach number, the efficiency and robustness of the solution algorithms were tested for different levels of chemical stiffness.The performance of the solution algorithms degraded as the Mach number and stiffness of the flow increased. At Mach 15 and 30, the lower-upper symmetric Gauss-Seidel method produces an eight order of magnitude drop in the energy residual in one-third to one-half the Cray C-90 computer time as compared to the point implicit and explicit under-relaxation methods. The explicit under-relaxation algorithm experienced convergence difficulties at Mach 30 and above. At Mach 40 the performance of the lower-upper symmetric Gauss-Seidel algorithm deteriorates to the point that it is out performed by the point implicit method. The effects of the viscous terms are investigated. Grid dependency questions are explored.

Palmer, Grant↗
NASA NTRS1997

Stiffness Characteristics of Composite Rotor Blades With Elastic Couplings

Recent studies on rotor aeroelastic response and stability have shown the beneficial effects of incorporating elastic couplings in composite rotor blades. However, none of these studies have clearly identified elastic coupling limits and the effects of elastic couplings on classical beam stiffnesses of representative rotor blades. Knowledge of these limits and effects would greatly enhance future aeroelastic studies involving composite rotor blades. The present study addresses these voids and provides a preliminary design database for investigators who may wish to study the effects of elastic couplings on representative blade designs. The results of the present study should provide a basis for estimating the potential benefits associated with incorporating elastic couplings without the need for first designing a blade cross section and then performing a cross-section analysis to obtain the required beam section properties as is customary in the usual one-dimensional beam-type approach.

Piatak, David J.↗
NASA NTRS1961

An Experimental Investigation of the Effects of Mach Number, Stabilizer Dihedral, and Fin Torsional Stiffness on the Transonic Flutter Characteristics of a Tee-Tail

A transonic flutter investigation was made of elastically and dynamically scaled models of the tee-tail of a patrol bomber. It was found that removal of the 15 deg. dihedral of the stabilizer used on the airplane raised the flutter boundary to higher dynamic pressures. The effect of Mach number on the flutter boundary was different for dihedral angles of 0 and 15 deg. The dynamic pressure at the flutter boundary increased approximately linearly with the torsional stiffness of the fin. High-speed motion pictures indicated that the flutter mode consisted primarily of fin bending and fin torsion.

Land, Norman S.↗
NASA NTRS2000

Compact, Stiff, Remotely-Actuable Quick-Release Clamp

The present invention provides a clamp that is compact and lightweight, yet provides high holding strength and stiffness or rigidity. The clamp uses a unique double slant interface design which provides mechanical advantages to resist forces applied to the clamp member as the load increases. The clamp allows for rapid and remote-activated release of the clamp jaws by applying only a small operating force to an over-center lock/release mechanism, such as by pulling a manual tether.

Tsai, Ted W.↗
NASA NTRS2002

Effect of Bearing Dynamic Stiffness on Gear Vibration

Noise is a major consideration in the design of high performance geared transmissions, such as for helicopters. Transmission error, that is, the accuracy with which the driven gear follows the driver gear, is a common indicator of noise generation. It is well known that bearing properties have a strong influence on shaft dynamics. However, up to now the contribution of bearings to transmission error has received little attention. In this paper, a torsional-axial-lateral geared rotor analysis is used to determine dynamic transmission error as a function of bearing stiffness and damping. Bearings have a similar effect as found in shaft dynamics; transmission error can be reduced more than 10 decibels by appropriate selection of bearing properties.

Fleming, David P.↗
NASA NTRS2003

Umbilical Stiffness Matrix Characterization and Testing for Microgravity Science Payloads

This paper describes efforts of testing and analysis of various candidate cables and umbilicals for International Space Station microgravity science payloads. The effects of looping, large vs. small displacements, and umbilical mounting configurations were assessed. A 3-DOF stepper motor driven fixture was used to excite the umbilicals. Forces and moments were directly measured in all three axes with a 6-DOF load cell in order to derive suitable stiffness matrices for design and analysis of vibration isolation controllers. Data obtained from these tests were used to help determine the optimum type and configuration of umbilical cables for the International Space Station microgravity science glovebox (MSG) vibration isolation platform. The data and procedures can also be implemented into control algorithm simulations to assist in validation of actively controlled vibration isolation systems. The experimental results of this work are specific in support of the Glovebox Integrated Microgravity Isolation Technology (g-LIMIT) isolation platform, to be located in the microgravity science glovebox aboard the U.S. Destiny Laboratory Module.

Engberg, Robert C.↗
NASA NTRS1999

Determination of Nonlinear Stiffness Coefficients for Finite Element Models with Application to the Random Vibration Problem

In this paper, a method for obtaining nonlinear stiffness coefficients in modal coordinates for geometrically nonlinear finite-element models is developed. The method requires application of a finite-element program with a geometrically non- linear static capability. The MSC/NASTRAN code is employed for this purpose. The equations of motion of a MDOF system are formulated in modal coordinates. A set of linear eigenvectors is used to approximate the solution of the nonlinear problem. The random vibration problem of the MDOF nonlinear system is then considered. The solutions obtained by application of two different versions of a stochastic linearization technique are compared with linear and exact (analytical) solutions in terms of root-mean-square (RMS) displacements and strains for a beam structure.

Muravyov, Alexander A.↗
NASA NTRS2001

Receptor-based differences in human aortic smooth muscle cell membrane stiffness

Cells respond to mechanical stimuli with diverse molecular responses. The nature of the sensory mechanism involved in mechanotransduction is not known, but integrins may play an important role. The integrins are linked to both the cytoskeleton and extracellular matrix, suggesting that probing cells via integrins should yield different mechanical properties than probing cells via non-cytoskeleton-associated receptors. To test the hypothesis that the mechanical properties of a cell are dependent on the receptor on which the stress is applied, human aortic smooth muscle cells were plated, and magnetic beads, targeted either to the integrins via fibronectin or to the transferrin receptor by use of an IgG antibody, were attached to the cell surface. The resistance of the cell to deformation ("stiffness") was estimated by oscillating the magnetic beads at 1 Hz by use of single-pole magnetic tweezers at 2 different magnitudes. The ratio of bead displacements at different magnitudes was used to explore the mechanical properties of the cells. Cells stressed via the integrins required approximately 10-fold more force to obtain the same bead displacements as the cells stressed via the transferrin receptors. Cells stressed via integrins showed stiffening behavior as the force was increased, whereas this stiffening was significantly less for cells stressed via the transferrin receptor (P<0.001). Mechanical characteristics of vascular smooth muscle cells depend on the receptor by which the stress is applied, with integrin-based linkages demonstrating cell-stiffening behavior.

Non-NASA Center↗
NASA NTRS1992

In vivo assessment of forearm bone mass and ulnar bending stiffness in healthy men

The cross-sectional bending stiffness EI of the ulna was measured in vivo by mechanical resistance tissue analysis (MRTA) in 90 men aged 19-89 years. MRTA measures the impedance response of low-frequency vibrations to determine EI, which is a reflection of elastic modulus E and moment of inertia I for the whole ulna. EI was compared to conventional estimates of bone mineral content (BMC), bone width (BW), and BMC/BW, which were all measured by single-photon absorptiometry. Results obtained from the nondominant ulna indicate that BW increases (r = 0.27, p = 0.01) and ulnar BMC/BW decreases (r = -0.31, p < or = 0.005) with age. Neither BMC nor EI declined with age. The single best predictor of EI was BW (r2 = 0.47, p = 0.0001), and further small but significant contributions were made by BMC (r2 = 0.53, p = 0.0001) and grip strength (r2 = 0.55, p = 0.0001). These results suggest that the resistance of older men to forearm fracture is related to age-associated changes in the moment of inertia achieved by redistributing bone mineral farther from the bending axis. We conclude that the in vivo assessment of bone geometry offers important insights to the comprehensive evaluation of bone strength.

NASA Center ARC↗
NASA NTRS2005

Unbalance Response Prediction for Accelerating Rotors With Load-Dependent Nonlinear Bearing Stiffness

Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic analysis requires that bearing forces corresponding to the actual bearing deflection be utilized. Previous papers have explored the transient effect of suddenly applied imbalance and the steady-state unbalance response, using bearing forces calculated by the rolling-element bearing analysis code COBRA-AHS. The present work considers the acceleration of a rotor through one or more critical speeds. The rotordynamic analysis showed that for rapid acceleration rates the maximum response amplitude may be considerably less than predicted by steady-state analysis. Above the critical speed, transient vibration at the rotor natural frequency occurs, similar to that predicted for a Jeffcott rotor with constant-stiffness bearings. A moderate amount of damping will markedly reduce the vibration amplitude, but this damping is not inherent in ball bearings.

Fleming, David P.↗
NASA NTRS1995

Active noise control using noise source having adaptive resonant frequency tuning through stiffness variation

A noise source for an aircraft engine active noise cancellation system in which the resonant frequency of a noise radiating element is tuned to permit noise cancellation over a wide range of frequencies. The resonant frequency of the noise radiating element is tuned by a plurality of force transmitting mechanisms which contact the noise radiating element. Each one of the force transmitting mechanisms includes an expandable element and a spring in contact with the noise radiating element so that excitation of the element varies the spring force applied to the noise radiating element. The elements are actuated by a controller which receives input of a signal proportional to displacement of the noise radiating element and a signal corresponding to the blade passage frequency of the engine's fan. In response, the controller determines a control signal which is sent to the elements and causes the spring force applied to the noise radiating element to be varied. The force transmitting mechanisms can be arranged to either produce bending or linear stiffness variations in the noise radiating element.

Pla, Frederic G.↗
NASA NTRS2009

Simple Formulas and Results for Buckling-Resistance and Stiffness Design of Compression-Loaded Laminated-Composite Cylinders

Simple formulas for the buckling stress of homogeneous, specially orthotropic, laminated-composite cylinders are presented. The formulas are obtained by using nondimensional parameters and equations that facilitate general validation, and are validated against the exact solution for a wide range of cylinder geometries and laminate constructions. Results are presented that establish the ranges of the nondimensional parameters and coefficients used. General results, given in terms of the nondimensional parameters, are presented that encompass a wide range of geometries and laminate constructions. These general results also illustrate a wide spectrum of behavioral trends. Design-oriented results are also presented that provide a simple, clear indication of laminate composition on critical stress, critical strain, and axial stiffness. An example is provided to demonstrate the application of these results to thin-walled column designs.

Nemeth, Michael P.↗