Search NASA⌕ Search

SEARCH · Search NASA

Results for “Stokes parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Embedded adaptation for time dependent real fluid/gas flows

An embedded adaptation algorithm is used to illustrate applications and requirements for Navier-Stokes and nonequilibrium unsteady two-dimensional flow fields. Both grid refinement and equation modification are included for unstructured distributions of quadrilateral cells. Multiple refinement parameters for distinct physical phenomena serve to monitor the evolving nonuniform field and to recognize flow features in isolated and overlapping subdomains. Examples from subsonic, hypersonic, internal, and external fields show substantial advantages for the adaptive approach.

Baron, Judson R.↗

Computational analysis of the flowfield of a two-dimensional ejector nozzle

A time-iterative full Navier-Stokes code, PARC, is used to analyze the flowfield of a two-dimensional ejector nozzle system. A parametric study was performed for two controlling parameters, duct to nozzle area ratio and nozzle pressure ratio. Results show that there is an optimum area ratio for the efficient pumping of secondary flow. At high area ratios, a freestream flow passes directly through the mixing duct without giving adequate pumping. At low area ratios, the jet boundary blocks the incoming flow. The nozzle pressure ratio variation shows that the pumping rate increases as the pressure ratio increases, provided there is no interaction between the shroud wall and the shock cell structure.

Choi, Y. H.↗

Similitude requirements for hypersonic, rarefied, nonequilibrium flow

Similitude requirements for hypersonic, rarefied flow with nonequilibrium chemistry and vibration are presented. The full Navier-Stokes equations with catalytic or noncatalytic walls and with or without slip conditions are nondimensionalized. The heat transfer coefficient is written in terms of fourteen dimensionless parameters and reduced to four by making the binary scaling assumption. Duplication of blunt and sharp nose heat transfer requires the use of air over a geometrically similar model with the same free stream velocity, wall temperature and product of free stream density and characteristic length. Estimates of this heat transfer coefficient are also presented.

Hendricks, W. L.↗

Supersonic Wind Tunnel Tests of a Half-axisymmetric 12 Deg-spike Inlet to a Rocket-based Combined-cycle Propulsion System

Results of an isolated inlet test for NASA's GTX air-breathing launch vehicle concept are presented. The GTX is a Vertical Take-off/ Horizontal Landing reusable single-stage-to-orbit system powered by a rocket-based combined-cycle propulsion system. Tests were conducted in the NASA Glenn 1- by 1-Foot Supersonic Wind Tunnel during two entries in October 1998 and February 1999. Tests were run from Mach 2.8 to 6. Integrated performance parameters and static pressure distributions are reported. The maximum contraction ratios achieved in the tests were lower than predicted by axisymmetric Reynolds-averaged Navier-Stokes computational fluid dynamics (CFD). At Mach 6, the maximum contraction ratio was roughly one-half of the CFD value of 16. The addition of either boundary-layer trip strips or vortex generators had a negligible effect on the maximum contraction ratio. A shock boundary-layer interaction was also evident on the end-walls that terminate the annular flowpath cross section. Cut-back end-walls, designed to reduce the boundary-layer growth upstream of the shock and minimize the interaction, also had negligible effect on the maximum contraction ratio. Both the excessive turning of low-momentum comer flows and local over-contraction due to asymmetric end-walls were identified as possible reasons for the discrepancy between the CFD predictions and the experiment. It is recommended that the centerbody spike and throat angles be reduced in order to lessen the induced pressure rise. The addition of a step on the cowl surface, and planar end-walls more closely approximating a plane of symmetry are also recommended. Provisions for end-wall boundary-layer bleed should be incorporated.

DeBonis, J. R.↗

An AOTV aeroheating and thermal protection study

The aerothermodynamics and thermal protection of aerobraking orbital transfer vehicles are studied with a view toward design methodology and technology requirements. A particular class of geometries is investigated: the ellipsoidally blunted raked-off elliptic cone. Discussed are the influence of various geometrical parameters on the trajectory and the heat flux as well as heating prediction methods ranging from an engineering correlation formula to computational solutions of the Navier-Stokes equations. Finite-rate catalytic thermal protection materials and gas radiation are considered. Estimates of the specific mass of possible thermal protection systems indicate that support structure is a large contributor to the aerobrake mass as compared with the thermal protection insulation itself. Sizing curves are included which enable the designer to estimate the size aerobrake required from heating considerations for different mass vehicles having aerobrakes of several specific masses.

Scott, C. D.↗

Integrated Oxygen Flow Meter/Heat Exchanger for Portable Life Support Systems

Space suits for future exploration missions will have multi-mission goals with new and challenging requirements for the portable life support system (PLSS). In particular, the space suit ventilation loop requires cooling and flow measurement components that must meet specifications that go well beyond the capabilities of the components used for the existing Extravehicular Mobility Unit. The flow meter must have high measurement accuracy over a wide flow range, compatibility with pure oxygen, low pressure losses, and very compact size. The heat exchanger that cools the ventilation loop must be built from materials that are compatible with the liquid cooling loop, and it must provide efficient gas cooling in a small package across conditions ranging from normal suit pressure to elevated pressure. This paper describes the development of a novel device that combines the flow measurement and cooling functions in a single, compact flow meter/heat exchanger (FMHX). We have developed design methods that enable us to assess trade-offs, optimize performance, and specify the design of an FMHX that meets the requirements and constraints for operation in future PLSSs. We used empirical design correlations combined with computational fluid dynamics analysis to design the FMHX design. Data from tests of a proof-of-concept FMHX validate the design methods and show that the device meets all design requirements. We used the results from these tests to refine the design parameters and predict performance of an optimized, prototype FMHX.

Izenson, Michael G.↗

Global Sensitivity Analysis of Simulated Remote Sensing Polarimetric Observations Over Snow

This study presents a detailed theoretical assessment of the information content of passive polarimetric observations over snow scenes, using a global sensitivity analysis (GSA) method. Conventional sensitivity studies focus on varying a single parameter while keeping all other parameters fixed. In contrast, the GSA correctly addresses the covariance of state parameters across their entire parameter space, hence favoring a more correct interpretation of inversion algorithms and the optimal design of their state vectors. The forward simulations exploit a vector radiative transfer model to obtain the Stokes vector emerging at the top of the atmosphere for different solar zenith angles, when the bottom boundary consists of a vertically resolved snowpack of non-spherical grains. The presence of light-absorbing particulates (LAPs), either embedded in the snow or aloft in the atmosphere above in the form of aerosols, is also considered. The results are presented for a set of wavelengths spanning the visible (VIS), near-infrared (NIR), and shortwave infrared (SWIR) region of the spectrum. The GSA correctly captures the expected, high sensitivity of the reflectance to LAPs in the VIS–NIR and to grain size at different depths in the snowpack in the NIR–SWIR. With adequate viewing geometries, mono-angle measurements of total reflectance in the VIS–SWIR (akin to those of the Moderate Resolution Imaging Spectroradiometer, MODIS) resolve grain size in the top layer of the snowpack sufficiently well. The addition of multi-angle polarimetric observations in the VIS–NIR provides information on grain shape and microscale roughness. The simultaneous sensitivity in the VIS–NIR to both aerosols and snow-embedded impurities can be disentangled by extending the spectral range to the SWIR, which contains information on aerosol optical depth while remaining essentially unaffected when the same particulates are mixed with the snow. Multi-angle polarimetric observations can therefore (i) effectively partition LAPs between the atmosphere and the surface, which represents a notorious challenge for snow remote sensing based on measurements of total reflectance only and (ii) lead to better estimates of grain shape and roughness and, in turn, the asymmetry parameter, which is critical for the determination of albedo. The retrieval uncertainties are minimized when the degree of linear polarization is used in place of the polarized reflectance. The Sobol indices, which are the main metric for the GSA, were used to select the state parameters in retrievals performed on data simulated for multiple instrument configurations. Improvements in retrieval quality with the addition of measurements of polarization, multi-angle views, and different spectral channels reflect the information content, identified by the Sobol indices, relative to each configuration. The results encourage the development of new remote sensing algorithms that fully leverage multi-angle and polarimetric capabilities of modern remote sensors. They can also aid flight planning activities, since the optimal exploitation of the information content of multi-angle measurements depends on the viewing geometry. The better characterization of surface and atmospheric parameters in snow-covered regions advances research opportunities for scientists of the cryosphere and ultimately benefits albedo estimates in climate models.

remote sensing↗

Asymptotic behavior of solutions of the renormalization group K-epsilon turbulence model

Presently, the only efficient way to calculate turbulent flows in complex geometries of engineering interest is to use Reynolds-average Navier-Stokes (RANS) equations. As compared to the original Navier-Stokes problem, these RANS equations posses much more complicated nonlinear structure and may exhibit far more complex nonlinear behavior. In certain cases, the asymptotic behavior of such models can be studied analytically which, aside from being an interesting fundamental problem, is important for better understanding of the internal structure of the models as well as to improve their performances. The renormalization group (RNG) K-epsilon turbulence model, derived directly from the incompresible Navier-Stokes equations, is analyzed. It has already been used to calculate a variety of turbulent and transitional flows in complex geometries. For large values of the RNG viscosity parameter, the model may exhibit singular behavior. In the form of the RNG K-epsilon model that avoids the use of explicit wall functions, a = 1, so the RNG viscosity parameter must be smaller than 23.62 to avoid singularities.

Yakhot, A.↗

Performance studies of the multigrid algorithms implemented on hypercube multiprocessor systems

In this paper, we analyze and compare the performance on a hypercube multiprocessor of some of the major multigrid techniques used in practice. The model problem considered here is that of solving the 2-D incompressible Navier-Stokes equations representing the flow between two parallel plates. Results obtained by implementing the different multigrid schemes on an iPSC are presented. Effects on the overall performance of various parameters of the algorithms, of the partitioning strategies employed, and of some of the characteristics of the underlying architecture are discussed.

Naik, Vijay K.↗

Numerical study of sink-flow boundary layers

Direct numerical simulations of sink-flow boundary layers, with acceleration parameters K between 1.5 x 10 to the -6th and 3.0 x 10 to the -6th, are presented. The three-dimensional, time-dependent Navier-Stokes equations are solved numerically, using a spectral method, with about one million degrees of freedom. The flow is assumed to be statistically steady, and self-similar. A multiple-scale approximation and periodic conditions are applied to the fluctuations. The turbulence is studied using instantaneous and statistical results. Good agreement with the experiments of Jones and Launder (1972) is observed. The two effects of the favorable pressure gradient are to extend the logarithmic layer, and to alter the energy balance of the turbulence near the edge of the boundary layer. At low Reynolds number the logarithmic layer is shortened and slightly displaced, but wall-layer streaks are present even at the lowest values of R(theta) for which turbulence can be sustained. Large quiescent patches appear in the flow. Relaminarization occurs at K = 3.0 x 10 to the -6th, corresponding to a Reynolds number R(theta) of about 330.

Spalart, Philippe R.↗

Patterns of helicity in solar active regions

Using 46 vector magnetograms from the Stokes Polarimeter of Mees Solar Observatory (MSO), we studied patterns of local helicity in three diverse solar active regions. From these magnetograms we computed maps of the local helicity parameter alpha = J(sub z)/B(sub z). Although such maps are noisy, we found patterns at the level approximately 2 to 3 sigma(sub J(sub z)), which repeat in successive magnetograms for up to several days. Typically, the alpha maps of any given active region contain identifiable patches with both positive and negative values of alpha. Even within a single sunspot complex, several such alpha patches can often be seen. We followed 68 alpha patches that could be identified on at least two successive alpha maps. We found that the persistence fraction of such patches decrease exponentially, with a characteristic time approximately 27 hr.

Pevtsov, Alexei A.↗

Design, construction and testing of annular diffusers for high speed civil transportation combustor applications

A theoretical and an experimental design study of subsonic flow through curved-wall annular diffusers is being carried out in order to establish the most pertinent design parameters for such devices and the implications of their application in the design of engine components in the aerospace industries. This investigation consists of solving numerically the full Navier Stokes and Continuity equations for the time-mean flow. Various models of turbulence are being evaluated for adoption throughout the study and comparisons would be made with experimental data where they exist. Assessment of diffuser performance based on the dissipated mechanical energy would also be made. The experimental work involves the application of Computer Aided Design software tool to the development of a suitable annular diffuser geometry and the subsequent downloading of such data to a CNC machine at Central State University. The results of the investigations are expected to indicate that more cost effective component design of such devices as effective component design of such devices as diffusers which normally contain complex flows can still be achieved. In this regard a review paper was accepted and presented at the First International Conference on High Speed Civil Transportation Research held at North Carolina A&T in December of 1994.

Okhio, Cyril B.↗

Numerical Simulation of Receptivity for a Transition Experiment

The cost of fuel to overcome turbulence induced viscous drag on a commercial airplane constitutes a significant fraction of the operating cost of an airline. Achieving laminar flow and maintaining it over a large portion of the wing can significantly reduce the viscous drag, and hence the cost. Design of such laminar-flow-control wings and their practical operation requires the ability to accurately and reliably predict the transition from laminar to turbulent flow. The transition process begins with the conversion of environmental and surface disturbances into the instability waves of the flow by a process called receptivity. The goal of the current research project has been to improve the prediction of transition through a better understanding of the physics of receptivity. The initial objective of this work was to investigate the specific stability and receptivity characteristics of a particular experimental investigation of boundary layer receptivity at NASA Langley. Some simulation results using direct solutions of the linearized Navier-Stokes equations which modeled this experiment where presented in the 1999 APS DFD meeting. However, based on these initial investigations, it became clear that to cover the vast receptivity parameter space required for a practical transition prediction tool, more efficient methods would be required. Thus, the focus of this research was shifted from modeling this particular experiment to formulating and developing new techniques that could efficiently yet accurately predict receptivity for a wide range of disturbance conditions.

Collis, S. Scott↗

Version 2 of the Protuberance Correlations for the Shuttle-Orbiter Boundary Layer Transition Tool

Orbiter-specific transition data, acquired in four ground-based facilities (LaRC 20-Inch Mach 6 Air Tunnel, LaRC 31-Inch Mach 10 Air Tunnel, LaRC 20-Inch Mach 6 CF4 Tunnel, and CUBRC LENS-I Shock Tunnel) with three wind tunnel model scales (0.75, 0.90, and 1.8%) and from Orbiter historical flight data, have been analyzed to improve a pre-existing engineering tool for reentry transition prediction on the windward side of the Orbiter. Boundary layer transition (BLT) engineering correlations for transition induced by isolated protuberances are presented using a laminar Navier-Stokes (N-S) database to provide the relevant boundary-layer properties. It is demonstrated that the earlier version of the BLT correlation that had been developed using parameters derived from an engineering boundary-layer code has improved data collapse when developed with the N-S database. Of the new correlations examined, the proposed correlation 5, based on boundary-layer edge and wall properties, was found to provide the best overall correlation metrics when the entire database is employed. The second independent correlation (proposed correlation 7) selected is based on properties within the boundary layer at the protuberance height. The Aeroheating Panel selected a process to derive the recommended coefficients for Version 2 of the BLT Tool. The assumptions and limitations of the recommended protuberance BLT Tool V.2 are presented.

King, Rudolph A.↗

Radiative Losses in the Chromosphere During A C-Class Flare

Context. Solar flares release an enormous amount of energy (~10(exp 32) erg) into the corona. A substantial fraction of this energy is transported to the lower atmosphere, which results in chromospheric heating. The mechanisms that transport energy to the lower solar atmosphere during a flare are still not fully understood. Aims. We aim to estimate the temporal evolution of the radiative losses in the chromosphere at the footpoints of a C-class flare, in order to set observational constraints on the electron beam parameters of a RADYN flare simulation. Methods. We estimated the radiative losses from hydrogen, and singly ionized Ca and Mg using semiempirical model atmospheres, which were inferred from a multiline inversion of observed Stokes profiles obtained with the CRISP and CHROMIS instruments on the Swedish 1-m Solar Telescope. The radiative losses were computed taking into account the effect of partial redistribution and non-local thermodynamic equilibrium. To estimate the integrated radiative losses in the chromosphere, the net cooling rates were integrated between the temperature minimum and the height where the temperature reaches 10 kK. We also compared our time series of radiative losses with those from the RADYN flare simulations. Results. We obtained a high spatial-resolution map of integrated radiative losses around the flare peak time. The stratification of the net cooling rate suggests that the Ca IR triplet lines are responsible for most of the radiative losses in the flaring atmosphere. During the flare peak time, the contribution from Ca II H and K and Mgii h and k lines are strong and comparable to the Ca IR triplet (~32kW m(exp -2)). Since our flare is a relatively weak event, the chromosphere is not heated above 11 kK, which in turn yields a subdued Lyα contribution (~7kW m(exp -2)) in the selected limits of the chromosphere. The temporal evolution of total integrated radiative losses exhibits sharply rising losses (0.4kW m(exp -2) (s(exp -1)) and a relatively slow decay (0.23kW m(exp -2) s(exp -1)). The maximum value of total radiative losses is reached around the flare peak time and can go up to 175kWm􀀀2 for a single pixel located at footpoint. After a small parameter study, we find the best model-data consistency in terms of the amplitude of radiative losses and the overall atmospheric structure with a RADYN flare simulation in the injected energy flux of 5 × 10(exp 10) erg s(exp -1) cm(exp -2).

Chromosphere↗

Measured and predicted vortex-induced leeward heating on a biconic at Mach 6 and 10

Detailed longitudinal and circumferential heating distributions were measured on a spherically blunted, 13 deg/7 deg biconic at angles of attack from 0 deg to 27 deg. The measurements were made in the Langley 20-inch Mach 6 tunnel and 31-inch Mach 10 tunnel to provide heating distributions at Mach 6 and 10 in air. The free-stream Reynolds number based on model length varied from 0.4 to 4.8 million at Mach 6 and 0.3 to 1.3 million at Mach 10. The basic trends in leeward heating are found to be described by a single parameter, the viscous interaction parameter. A decrease in this parameter results in a decrease in leeward heating for attached flow, an increase in heating for separated flow, and a forward movement of the separation region. The parabolized Navier-Stokes code for laminar flow qualitatively predicted the longitudinal and circumferential heating distributions.

Miller, C. G.↗

An analytical approach to grid sensitivity analysis for NACA four-digit wing sections

Sensitivity analysis in computational fluid dynamics with emphasis on grids and surface parameterization is described. An interactive algebraic grid-generation technique is employed to generate C-type grids around NACA four-digit wing sections. An analytical procedure is developed for calculating grid sensitivity with respect to design parameters of a wing section. A comparison of the sensitivity with that obtained using a finite difference approach is made. Grid sensitivity with respect to grid parameters, such as grid-stretching coefficients, are also investigated. Using the resultant grid sensitivity, aerodynamic sensitivity is obtained using the compressible two-dimensional thin-layer Navier-Stokes equations.

Sadrehaghighi, I.↗