Results for “Stress and Environment Effects” — Page 17

NASA NTRS1993

Buckling analysis of laminated thin shells in a hot environment

Results are presented of parametric studies to assess the effects of various parameters on the buckling behavior of angle-ply, laminated thin shells in a hot environment. These results were obtained by using a three-dimensional finite element analysis. An angle-ply, laminated thin shell with fiber orientation of (theta/-theta)(sub 2) was subjected to compressive mechanical loads. The laminated thin shell had a cylindrical geometry. The laminate contained T300 graphite fibers embedded in an intermediate-modulus, high-strength (IMHS) matrix. The fiber volume fraction was 55 percent and the moisture content was 2 percent. The residual stresses induced into the laminate structure during the curing were taken into account. Parametric studies were performed to examine the effect on the critical buckling load of the following parameters: cylinder length and thickness, internal hydrostatic pressure, different ply thicknesses, different temperature profiles through the thickness of the structure, and different lay up configurations and fiber volume fractions. In conjunction with these parameters the ply orientation was varied from 0 deg to 90 deg. Seven ply angles were examined: 0 deg, 15 deg, 30 deg, 45 deg, 60 deg, 75 deg, and 90 deg. The results show that the ply angle theta and the laminate thickness had significant effects on the critical buckling load. The fiber volume fraction, the fiber orientations, and the internal hydrostatic pressure had important effects on the critical buckling load. The cylinder length had a moderate influence on the buckling load. The thin shell with (theta/-theta)(sub 2) or (theta/-theta)(sub s) angle-ply laminate had better buckling-load performance than the thin shell with (theta)(sub 4) angle-ply laminate. The temperature profiles through the laminate thickness and various laminates with the different ply thicknesses has insignificant effects on the buckling behavior of the thin shells.

Gotsis, Pascal K.↗

NASA NTRS1978

Influence of hydrogen environments on crack growth in Inconel 718

The effect of hydrogen environments on sustained-load and cyclic-load crack growth in Inconel 718 was investigated using fracture-mechanics-type specimens. The sustained-load crack growth was determined to be a function of heat-treatment condition, temperature, and hydrogen pressure. The threshold stress intensity for subcritical crack growth was independent of hydrogen pressure at pressures greater than 21 MN/sq m (3000 psi). The cyclic-load crack growth rate in Inconel 718 at low and moderate stress intensity ranges increased with increasing hydrogen pressure. Decreasing the cyclic frequency from 1.0 to 0.1 Hz considerably increased the cyclic crack growth rate at 0.069 MN/sq m (10 psi) and at 68.9 MN/sq m (10,000 psi) hydrogen pressure. A series of measurements performed between 1.0 and 0.1 Hz showed that the crack growth rate increased as a complex function of the time per cycle.

Walter, R. J.↗

NASA NTRSDate not supplied

Spaceflight-Induced Changes in Microbial Virulence and the Impact to the Host Immune Response

Many microbial pathogen shave repeatedly exhibited unexpected responses relevant to infectious disease when grown in microgravity and microgravity analogue environments, including changes in final cell concentration, biofilm production, stress resistance, antibiotic sensitivity, gene expression, host-pathogen interactions, and virulence. Notably, the classic foodborne pathogen Salmonella enterica serovar Typhimurium displayed increased virulence in animals when cultured in either the spaceflight analogue or true spaceflight environment. Recently, Serratia marcescens also was shown to increase virulence when cultured in the spaceflight environment. In parallel, astronaut studies have characterized a persistent spaceflight-induced dysregulation of the human immune system at multiple levels, which suggests an increased risk of infectious diseases. Moreover, astronauts have some degree of clinical infectious disease incidence. However, the contribution of the microgravity environment on host-pathogen interactions and potential for clinical disease remains understudied and poorly characterized. The goal of this study is to gain insight into the breadth of other medically significant microbial pathogens that may exhibit altered virulence and pathogenesis-related responses when cultured in space flight analogue conditions. Specifically, we are characterizing the effect of spaceflight analogue culture (Low Shear Modeled Microgravity/LSMMG) on microbial pathogenesis-related stress responses, in vitro host-pathogen interactions, gene expression, and virulence potential in animals using five important model bacterial pathogens, Salmonella enterica Enteritidis, Pseudomonas aeruginosa, Burkholderia cepacia, Streptococcus pneumoniae, and enterohemorrhagic Escherichia coli. Herein, we present data from one of these pathogens, the foodborne bacterium, S. enterica Enteritidis, which is closely related to S. enterica Typhimurium. Phenotypes evaluated included growth profiles, environmental stress responses(acid, oxidative, bile, and thermal stresses),and in vitro colonization of3-D biomimetic cultures of human intestinal tissue containing immune cells. Transcriptomic profiling and virulence studies are ongoing. We show that S. Enteritidis exhibited key alterations in pathogenic responses to LSMMG culture that suggest increased infection risk, including several responses which were different from those observed in the closely related pathovar S. Typhimurium. This information will provide critical mechanistic insight into the potential impact of microgravity on alterations in microbial virulence and associated infectious disease risk to crew health during spaceflight missions.

C M Ott↗

NASA NTRS2024

Spaceflight-Induced Changes in Microbial Virulence and the Impact to the Host Immune Response

Many microbial pathogen shave repeatedly exhibited unexpected responses relevant to infectious disease when grown in microgravity and microgravity analogue environments, including changes in final cell concentration, biofilm production, stress resistance, antibiotic sensitivity, gene expression, host-pathogen interactions, and virulence. Notably, the classic foodborne pathogen Salmonella enterica serovar Typhimurium displayed increased virulence in animals when cultured in either the spaceflight analogue or true spaceflight environment. Recently, Serratia marcescens also was shown to increase virulence when cultured in the spaceflight environment. In parallel, astronaut studies have characterized a persistent spaceflight-induced dysregulation of the human immune system at multiple levels, which suggests an increased risk of infectious diseases. Moreover, astronauts have some degree of clinical infectious disease incidence. However, the contribution of the microgravity environment on host-pathogen interactions and potential for clinical disease remains understudied and poorly characterized. The goal of this study is to gain insight into the breadth of other medically significant microbial pathogens that may exhibit altered virulence and pathogenesis-related responses when cultured in space flight analogue conditions. Specifically, we are characterizing the effect of spaceflight analogue culture (Low Shear Modeled Microgravity/LSMMG) on microbial pathogenesis-related stress responses, in vitro host-pathogen interactions, gene expression, and virulence potential in animals using five important model bacterial pathogens, Salmonella enterica Enteritidis, Pseudomonas aeruginosa, Burkholderia cepacia, Streptococcus pneumoniae, and enterohemorrhagic Escherichia coli. Herein, we present data from one of these pathogens, the foodborne bacterium, S. enterica Enteritidis, which is closely related to S. enterica Typhimurium. Phenotypes evaluated included growth profiles, environmental stress responses(acid, oxidative, bile, and thermal stresses),and in vitro colonization of3-D biomimetic cultures of human intestinal tissue containing immune cells. Transcriptomic profiling and virulence studies are ongoing. We show that S. Enteritidis exhibited key alterations in pathogenic responses to LSMMG culture that suggest increased infection risk, including several responses which were different from those observed in the closely related pathovar S. Typhimurium. This information will provide critical mechanistic insight into the potential impact of microgravity on alterations in microbial virulence and associated infectious disease risk to crew health during spaceflight missions.

C.M. Ott↗

NASA NTRS2005

Recreation Embedded State Tuning for Optimal Readiness and Effectiveness (RESTORE)

Physiological self-regulation training is a behavioral medicine intervention that has demonstrated capability to improve psychophysiological coping responses to stressful experiences and to foster optimal behavioral and cognitive performance. Once developed, these psychophysiological skills require regular practice for maintenance. A concomitant benefit of these physiologically monitored practice sessions is the opportunity to track crew psychophysiological responses to the challenges of the practice task in order to detect shifts in adaptability that may foretell performance degradation. Long-duration missions will include crew recreation periods that will afford physiological self-regulation training opportunities. However, to promote adherence to the regimen, the practice experience that occupies their recreation time must be perceived by the crew as engaging and entertaining throughout repeated reinforcement sessions on long-duration missions. NASA biocybernetic technologies and publications have developed a closed-loop concept that involves adjusting or modulating (cybernetic, for governing) a person's task environment based upon a comparison of that person's physiological responses (bio-) with a training or performance criterion. This approach affords the opportunity to deliver physiological self-regulation training in an entertaining and motivating fashion and can also be employed to create a conditioned association between effective performance state and task execution behaviors, while enabling tracking of individuals psychophysiological status over time in the context of an interactive task challenge. This paper describes the aerospace spin-off technologies in this training application area as well as the current spin-back application of the technologies to long-duration missions - the Recreation Embedded State Tuning for Optimal Readiness and Effectiveness (RESTORE) concept. The RESTORE technology is designed to provide a physiological self-regulation training countermeasure for maintaining and reinforcing cognitive readiness, resilience under psychological stress, and effective mood states in long-duration crews. The technology consists of a system for delivering physiological self-regulation training and for tracking crew central and autonomic nervous system function; the system interface is designed to be experienced as engaging and entertaining throughout repeated training sessions on long-duration missions. Consequently, this self-management technology has threefold capability for recreation, behavioral health problem prophylaxis and remediation, and psychophysiological assay. The RESTORE concept aims to reduce the risk of future manned exploration missions by enhancing the capability of individual crewmembers to self-regulate cognitive states through recreation-embedded training protocols to effectively deal with the psychological toll of long-duration space flight.

Pope, Alan T.↗

NASA NTRS1971

Effect of altered 'weight' upon animal tolerance to restraint.

The effect of altered weight upon animal tolerance to restraint was determined by simulating various accelerative forces with directed lead weights using restrained and nonrestrained domestic fowl (chickens). Weighting (increased weight) and conterweighting (reduced weight) produced a stressed condition - reduced relative lymphocyte counts, loss of body mass, and/or the development of a disorientation syndrome - in both restrained and nonrestrained (caged only) birds. The animal's tolerance to altered weight appeared to be a function of its body weight. Unrestrained birds were stressed by counterweighting (mean plus or minus standard error) 58.3 plus or minus 41% of their body weight, whereas restrained birds tolerated only 32.2 plus or minus 2.6% reduction in body weight. A training regimen for restrained birds was not effective in improving their tolerance to a reduced weight environment. It was concluded that domestic fowl living in a weightless (space) environment should be restrained minimally and supported by ventrally directed tension equivalent to approximately 50% of their body mass (their weight in a 1 G environment).

Burton, R. R.↗

NASA NTRS1977

The influence of growth speed, orientation and environment on fracture of aligned Al-CuAl2

There has been considerable interest in the mechanical properties of aligned eutectics as functions of microstructure, orientation between reinforcement and stress axis, and temperature of testing. However, little is known about the behavior of these alloys in aggressive environments, such as liquid metals, with the exception of a recent paper on embrittlement of several eutectic alloys in gallium and gallium-indium alloys. This paper is concerned with the effects of a liquid Ga-16%In solution on tensile behavior of an aligned Al-CuAl2 eutectic.

Skiff, P. K.↗

NASA NTRS1993

Reliability assessment of thrust chamber cooling concepts using probabilistic analysis techniques

The reliability of OFHC (Oxygen Free High Conductivity) copper and NARloy-Z thrust chambers is assessed by applying probabilistic structural analysis techniques to incorporate design parameter variability and uncertainty. Thrust chambers specifically evaluated are the cylindrical test fixtures employed in a plug-nozzle configuration at the NASA Lewis Research Center. Direct sampling Monte Carlo simulations based on a simplified life prediction methodology established probability densities of firing cycles to structural failure. Simulated cyclic lives demonstrated modest agreement to experiment. Similarly, regions of high structural failure probability were determined using a limit state approach employing calculated cumulative distribution functions for effective stress response and an assumed material strength distribution. A probability of failure of 0.012 was calculated at the center of the coolant channel hot-gas-side wall for an OFHC milled channel. Structural response was found to be sensitive to the uncertainties in the thrust chamber thermal environment and the material's thermal expansion coefficient.

Rapp, Douglas C.↗

NASA NTRS1993

Reliability assessment of thrust chamber cooling concepts using probabilistic analysis techniques

The reliability of OFHC (Oxygen Free High Conductivity) copper and NARloy-Z thrust chambers is assessed by applying probabilistic structural analysis techniques to incorporate design parameter variability and uncertainty. Thrust chambers specifically evaluated are the cylindrical test fixtures employed in a plug-nozzle configuration at the NASA Lewis Research Center. Direct sampling Monte Carlo simulations based on a simplified life prediction methodology established probability densities of firing cycles to structural failure. Simulated cyclic lives demonstrated modest agreement to experiment. Similarly, regions of high structural failure probability were determined using a limit state approach employing calculated cumulative distribution functions for effective stress response and an assumed material strength distribution. A probability of failure of 0.012 was calculated at the center of the coolant channel hot-gas-side wall for an OFHC milled channel. Structural response was found to be sensitive to the uncertainties in the thrust chamber thermal environment and the material's thermal expansion coefficient.

Rapp, Douglas C.↗

NASA NTRS1994

Scanning and Transmission Electron Microscopy of High Temperature Materials

Software and hardware updates to further extend the capability of the electron microscope were carried out. A range of materials such as intermetallics, metal-matrix composites, ceramic-matrix composites, ceramics and intermetallic compounds, based on refractory elements were examined under this research. Crystal structure, size, shape and volume fraction distribution of various phases which constitute the microstructures were examined. Deformed materials were studied to understand the effect of interfacial microstructure on the deformation and fracture behavior of these materials. Specimens tested for a range of mechanical property requirements, such as stress rupture, creep, low cycle fatigue, high cycle fatigue, thermomechanical fatigue, etc. were examined. Microstructural and microchemical stability of these materials exposed to simulated operating environments were investigated. The EOIM Shuttle post-flight samples were also examined to understand the influence of low gravity processing on microstructure. In addition, fractographic analyses of Nb-Zr-W, titanium aluminide, molybdenum silicide and silicon carbide samples were carried out. Extensive characterization of sapphire fibers in the fiber-reinforced composites made by powder cloth processing was made. Finally, pressure infiltration casting of metal-matrix composites was carried out.

Source record↗

NASA NTRS2008

NASA Glenn Research Center's Materials International Space Station Experiments (MISSE 1-7)

NASA Glenn Research Center (Glenn) has 39 individual materials flight experiments (>540 samples) flown as part of the Materials International Space Station Experiment (MISSE) to address long duration environmental durability of spacecraft materials in low Earth orbit (LEO). MISSE is a series of materials flight experiments consisting of trays, called Passive Experiment Carriers (PECs) that are exposed to the space environment on the exterior of the International Space Station (ISS). MISSE 1-5 have been successfully flown and retrieved and were exposed to the space environment from one to four years. MISSE 6A & 6B were deployed during the STS-123 shuttle mission in March 2008, and MISSE 7A & 7B are being prepared for launch in 2009. The Glenn MISSE experiments address atomic oxygen (AO) effects such as erosion and undercutting of polymers, AO scattering, stress effects on AO erosion, and in-situ AO fluence monitoring. Experiments also address solar radiation effects such as radiation induced polymer shrinkage, stress effects on radiation degradation of polymers, and radiation degradation of indium tin oxide (ITO) coatings and spacesuit fabrics. Additional experiments address combined AO and solar radiation effects on thermal control films, paints and cermet coatings. Experiments with Orion Crew Exploration Vehicle (CEV) seals and UltraFlex solar array materials are also being flown. Several experiments were designed to provide ground-facility to in-space calibration data thus enabling more accurate in-space performance predictions based on ground-laboratory testing. This paper provides an overview of Glenn s MISSE 1-7 flight experiments along with a summary of results from Glenn s MISSE 1 & 2 experiments.

deGroh, Kim K.↗

NASA NTRS1972

Study of the effect of space cabin environment on susceptibility to disease

Decreased resistance to infections initiated by respiratory challenge with Klebsiella pneumoniae or influenza virus was observed in mice maintained in a simulated space cabin environment represented by 98% oxygen atmosphere and 27,000 ft altitude (5 psi). The reduced resistance was manifested by increased mortality rates as compared to those seen in mice maintained at ground level condition. However, an adaptation to the stress appeared to be present in mice exposed to the space cabin environment for extended time period, i.e. 36 days, and then challenged with the influenza virus. Reduced resistance was not observed when Salmonella typhimurium was used as the challenge agent. Histopathologic examination of lungs of mice indicated that the severity of damage appeared to be related to the duration of exposure to the simulated space cabin environment.

Source record↗

NASA NTRS2000

Modeling of Horns for Sonic/Ultrasonic Applications

JPL has a requirement for telerobotic tools for planetary sample acquisition, which require low power and have the ability to work in harsh environments. We are currently investigating the possibility of using ultrasonic horns to develop a family of ultrasonic tools for these environments. In an effort to determine control parameters a one-dimensional Mason's model for a stepped ultrasonic horn assembly was developed which includes the effects of mechanical and electrical losses in the piezoelectric material and acoustic elements. The model is separated into three regions; the piezoelectric stack including stress bolt the backing layer and the horn. The model is found to predict the impedance data of the horn assembly very accurately up to the first coupled (radial) resonance. The model also allows for the calculation of the velocity and force and power delivered to each acoustic element. FEM modeling and accelerometer data from the horn tip were used to corroborate the model. The difficulties associated with modeling the load impedance of various devices will be discussed and current directions noted.

Sherrit, Stewart↗

NASA NTRS2004

Effects of diet and exposure to hindlimb suspension on estrous cycling in Sprague-Dawley rats

Various factors can disrupt the female reproductive cycle resulting in subfertility. The primary objective of this study was to determine whether physiological changes associated with exposure to hypogravity disrupt reproductive cycles. The hindlimb suspension (HLS) model was used to simulate the major physiological effects of hypogravity in female Sprague-Dawley rats. Also, to determine whether diet may influence reproductive results, rats were fed purified American Institute of Nutrition (AIN)-93G or chow diet. Rats (n = 9-11/group) subjected to HLS had lengthened estrous cycles due to prolonged diestrus, indicating hypoestrogenism. Interestingly, HLS rats fed AIN-93G but not chow diet had significantly reduced time spent in estrus and decreased plasma estradiol. Attenuation of hypoestrogenism in the chow-fed rats suggested that diet provided an exogenous source of estrogen. The mechanism involved in the disruption of estrous cycling remains to be determined. HLS increased urinary corticosterone (CORT) levels during the initial 4 days of HLS, suggesting that physiological responses to acute stress may be a potential mechanism in the disruption of estrous cycles. Higher basal urinary CORT was observed in rats fed chow vs. AIN-93G diet. HLS resulted in increased urinary CORT. However, two-way ANOVA indicated a significant HLS effect (P < 0.001) but no effect of HLS x diet effect on urinary CORT levels, suggesting that estrogenic activity associated with the chow diet did not enhance the stress response. The results of this study indicate that HLS, diet, and the combination of HLS and diet influence estrous cycling. This has important implications for future reproductive success in the hypogravity environment of space.

Estrous Cycle/physiology↗

NASA NTRS1992

Effect of type of load on stress analysis of thin-walled ducts

The standard procedure for qualifying the design of duct (pipe) systems in the Space Shuttle Main Engine (SSME) has been fairly well defined. However, since pipe elbows are quite common and important in the SSME duct systems, a clear understanding of the detailed stress profile of the components is necessary for accurate structural and life assessments. This study was initiated to predict the stress profile at/near the tangent point along the cross section of the duct under various types of loads. Also, this study was further extended to understand the stiffening effect on stresses due to pressure at the tangent point. The intention of this study was to identify the importance of selecting proper locations for mounting strain gauges and to utilize the obtained results to anchor dynamic models for accurate structural and life assessments of the SSME ducts under a dynamic environment. The finite element method was utilized in this study.

Min, J. B.↗

NASA NTRS1986

Biomedical support of man in space

The effects of G and/or exercise on cardiopulmonary adjustments to stresses are studied. The control of the cardiopulmonary system is examined using simulated microgravity (recumbency, immersion, lower body positive pressure, and 6-deg head-down tilt) and increased acceleration. It is observed that at rest and during exercise in simulated zero-6 environments, the stroke volume and cardiac output are initially increased and then (after prolonged exposure) return to prezero-G levels. Cardiovascular responses to increased gravity (1, 2, and 3 G) at rest and during exercise are analyzed; a decrease in plasma volume resulting in decreases in stroke volume and cardiac output, and an increase in heart rate are detected.

Pendergast, D. R.↗

NASA NTRS2005

Space Qualification of Laser Diode Arrays

Laser instruments have great potential in enabling a new generation of remote-sensing scientific instruments. NASA s desire to employ laser instruments aboard satellites, imposes stringent reliability requirements under severe conditions. As a result of these requirements, NASA has a research program to understand, quantify and reduce the risk of failure to these instruments when deployed on satellites. Most of NASA s proposed laser missions have base-lined diode-pumped Nd:YAG lasers that generally use quasi-constant wave (QCW), 808 nm Laser Diode Arrays (LDAs). Our group has an on-going test program to measure the performance of these LDAs when operated in conditions replicating launch and orbit. In this paper, we report on the results of tests designed to measure the effect of vibration loads simulating launch into space and the radiation environment encountered on orbit. Our primary objective is to quantify the performance of the LDAs in conditions replicating those of a satellite instrument, determine their limitations and strengths which will enable better and more robust designs. To this end we have developed a systematic testing strategy to quantify the effect of environmental stresses on the optical and electrical properties of the LDA.

Troupaki, Elisavet↗

NASA NTRSDate not supplied

Space Radiation and Central Nervous System Impacts: NASA Standards and Evidence

It is well understood that large radiation localized doses to the brain cause clinically significant impacts to the central nervous system in human populations. However, the effects in adults exposed to lower doses remain unclear due to lack of data in relevant human cohorts. The impact of exposure to high-energy particles is even less understood. NASA’s Human Research Program relies heavily on model systems to characterize the impacts of the space radiation environment on the human brain and how potential changes may effect mission success and long term health and well-being. Animal, cellular, and molecular experiments implicate multiple – and possibly related – mechanisms that mediate impacts to the central nervous system in model systems including, but not limited to inflammation, immune responses, oxidative stress, metabolism, myelination, molecule transport, electrophysiology, and a variety of “omic” changes. While animal studies demonstrate potential changes across a number of cognitive and behavioral domains the direct applicability to the astronaut population remains unclear. Furthermore data access experiments and model systems can be inconsistent and dependent on multiple experimental variables indicating a clear need for robust validation. To minimize potential impacts to astronauts NASA limits dose to the CNS based on a combination of terrestrial epidemiology informed by experimental evidence in model systems. To date no recommendations have been provided by the National Committee on Radiation Protection and Measurements. This presentation will provide an overview of NASA’s current dose limits for CNS exposure to space radiation as well as highlights of the current state of evidence and ongoing research.

S Robin Elgart↗