Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synchrotron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Performance of Carbide Alloy Compounds in Carbon Doped MoNbTaW

In this work, the performance of the carbon doped compositionally complex alloy (CCA) MoNbTaW was studied under ambient and high pressure and high temperature conditions. TaC and NbC carbides were formed when a large concentration of carbon was introduced while synthesizing the MoNbTaW alloy. Both FCC carbides and BCC CCA phases were detected in the sample compound at room temperature, in which the BCC phase was believed to have only refractory elements MoNbTaW while FCC carbide came from TaC and NbC. Carbides in the carbon doped MoNbTaW alloy were very stable since no phase transition was obtained even under 3.1 GPa and 870 °C by employing the resistor-heating diamond anvil cell (DAC) synchrotron X-ray diffraction technique. Via in situ examination, this study confirms the stability of carbides and MoNbTaW in the carbon doped CCA even under high pressure and high temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Viscoelasticity-induced structure anisotropy in amorphous materials

Viscoelasticity-induced structural change in Zr 55 Cu 30 Ni 5 Al 10 metallic glass (Zr-MG) and amorphous selenium (a-Se) is investigated using synchrotron X-ray diffraction. By analyzing the two-dimensional diffraction pattern, two types of structural anisotropy with the feature of the residual elastic strain or heterogeneous intensity of diffraction rings are revealed. The origin of the structural anisotropy is attributed to the topological rearrangement in the Zr-MG and conformation rearrangement in the a-Se. In conclusion, our findings bring a structural identity to the phenomenological structureless deformation defect widely used in different amorphous materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Microscopic piezoelectric behavior of clamped and membrane (001) PMN-30PT thin films

Bulk single-crystal relaxor-ferroelectrics, like Pb(Mg 1/3 Nb 2/3 )O- 3 -PbTiO 3 (PMN-PT), are widely known for their large piezoelectricity. This is attributed to polarization rotation, which is facilitated by the presence of various crystal symmetries for compositions near a morphotropic phase boundary. Relaxor-ferroelectric thin films, which are necessary for low-voltage applications, suffer a reduction in their piezoelectric response due to clamping by the passive substrate. To understand the microscopic behavior of this adverse phenomenon, we employ the AC electric field driven in-operando synchrotron x-ray diffraction on patterned device structures to investigate the piezoelectric domain behavior under an electric field for both a clamped (001) PMN-PT thin film on Si and a (001) PMN-PT membrane released from its substrate. In the clamped film, the substrate inhibits the field-induced rhombohedral (R) to tetragonal (T) phase transition resulting in a reversible R to Monoclinic (M) transition with a reduced longitudinal piezoelectric coefficient d 33 < 100 pm/V. Releasing the film from the substrate results in recovery of the R to T transition and results in a d 33 > 1000 pm/V. Here, using diffraction with spatial mapping, we find that lateral constraints imposed by the boundary between the active and inactive materials also inhibit the R to T transition. Phase-field calculations on both clamped and released PMN-PT thin films simulate our experimental findings. Resolving the suppression of thin film piezoelectric response is critical to their application in piezo-driven technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Precision Calcination Mechanism of CaCO 3 to High-Porosity Nanoscale CaO CO 2 Sorbent Revealed by Direct In Situ Observations

Deploying energy storage and carbon capture at scale is hindered by the substantial endothermic penalty of decomposing CaCO 3 to CaO and CO 2 , and the rapid loss of CO 2 absorption capacity by CaO sorbent particles due to sintering at the high requisite decomposition temperatures. The decomposition reaction mechanism underlying sorbent deactivation remains unclear at the atomic level and nanoscale due to past reliance on postmortem characterization methods with insufficient spatial and temporal resolution. Thus, elucidating the important CaCO 3 decomposition reaction pathway requires direct observation by time-resolved (sub-)nanoscale methods. Here, chemical and structural dynamics during the decomposition of CaCO 3 nanoparticles to nanoporous CaO particles comprising high-surface-area CaO nanocrystallites are examined. Comparing in situ transmission electron microscopy (TEM) and synchrotron X-ray diffraction experiments gives key insights into the dynamics of nanoparticle calcination, involving anisotropic CaCO 3 thermal distortion before conversion to thermally dilated energetically stable CaO crystallites. Time-resolved TEM uncovered a novel CaO formation mechanism involving heterogeneous nucleation at extended CaCO 3 defects followed by sweeping reaction front motion across the initial CaCO 3 particle. These observations clarify longstanding, yet incomplete, reaction mechanisms and kinetic models lacking accurate information about (sub-)nanoscale dynamics, while also demonstrating calcination of CaCO 3 without sintering through rapid heating and precise temperature control.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pressure-induced suppression of Jahn–Teller distortions and enhanced electronic properties in high-entropy oxide (Mg 0.2 Ni 0.2 Co 0.2 Zn 0.2 Cu 0.2 )O

Jahn–Teller distortions are often observed in Cu II -containing complex oxides resulting in remarkable changes of physical properties. Tuning the Jahn–Teller distortions with pressure has attracted considerable interest but is less studied in Cu II -containing high-entropy oxides (HEOs). We found that pressure can suppress the structural distortions originating from the Jahn–Teller effect of CuO 6 octahedra in the rock salt-type (Mg 0.2 Ni 0.2 Co 0.2 Zn 0.2 Cu 0.2 )O HEO and significantly modify its electronic properties. Synchrotron x-ray diffraction shows that the structural distortions arising from the Jahn–Teller effect of CuO 6 octahedra are progressively suppressed, and the distorted structure evolves into a nearly ideal form under compression. Alternating current impedance and ultraviolet-visible absorption measurements reveal a dramatic resistance drop by more than three orders of magnitude and an obvious bandgap decrease in ~0.1 eV, respectively, accompanied by the pressure-induced suppression of structural distortions. Our study presents a promising route for tuning the structural distortions and the electronic structures of Cu II -containing HEOs for optimizing materials functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2021

In situ study on the compression deformation of MoNbTaVW high-entropy alloy

The excellent mechanical properties of high-entropy alloys (HEAs) make them promising materials for advances in science and technology. However, the underlying mechanism of plastic deformation is not well understood. In situ experiments are urgently required to provide a fundamental understanding of the plastic deformation under high pressure. We performed in situ synchrotron X-ray diffraction (XRD) experiments to study compression deformation behavior of the HEA MoNbTaVW in a radial diamond anvil cell (rDAC). Our results show that the strength and ratio of the stress-to-shear modulus values are ~1.5 and 3 times that of pure tungsten (W), respectively. MoNbTaVW showed plastic deformation above 5 GPa and displayed a much stronger texture. In this work, we found that the active dislocation behavior is mainly responsible for the high strength in MoNbTaVW under compression. This unique technique opens a new avenue to investigate the in situ mechanical properties and their mechanism in other types of HEAs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural changes upon magnetic ordering in magnetocaloric AlFe 2 B 2

With a Curie temperature just above room temperature, AlFe 2 B 2 is a useful magnetocaloric material composed of earth-abundant elements. Here, we employ temperature-dependent high-resolution synchrotron X-ray diffraction to establish with high certainty that the paramagnetic to ferromagnetic transition in AlFe 2 B 2 is of second order, showing no discontinuity in lattice parameters or cell volume. Nevertheless, the lattice parameters undergo anisotropic changes across the transition with distinct differences in the thermal expansion coefficients. While the $a$ and $b$ lattice parameters show a positive thermal expansion, $c$ shows a negative thermal expansion. We link these changes to the respective interatomic distances to determine the contribution of magnetism to the anisotropic structural evolution. The work underpins the possible role of magnetostructural coupling in driving the magnetocaloric effect in AlFe 2 B 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Structural coupling and magnetic tuning in Mn 2– x Co x P magnetocalorics for thermomagnetic power generation

Promising materials for magnetic refrigeration and thermomagnetic power generation often display strong coupling between magnetism and structure. It has been previously proposed that MnCoP exhibits this strong coupling, contributing to its substantial magnetocaloric effect near T C = 578K. Here, we show from temperature-dependent synchrotron x-ray diffraction that MnCoP displays a discontinuity in the thermal expansion at T C , with spontaneous magnetostriction that is positive in the a direction and negative in the b direction, highlighting the anisotropic nature of the magnetostructural coupling. Varying the Mn:Co ratio of Mn 2– x Co x P within the range of 0.6 ≤ x ≤ 1.4 allows the magnetic properties to be tuned. T C decreases as the composition deviates from stoichiometric MnCoP, as does the saturation magnetization. The magnitude of the magnetocaloric effect, |Δ S M |, decreases as well, due to broadening of the magnetic transition. The large reversible change in magnetization Δ M accessible over a small temperature range under moderate magnetic fields makes these materials promising for thermomagnetic power generation from waste heat.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Rapid grain refinement and compositional homogenization in a cast binary Cu50Ni alloy achieved by friction stir processing

Friction stir processing (FSP) has been increasingly adopted for joining and processing materials in automotive, aerospace and industrial construction. During FSP a dynamic competition between high-speed shear deformation and deformation-induced heating brings about a complex competition between multiple dynamic microstructural evolution mechanisms making it difficult to predict the microstructural evolution pathway. Hence, improved understanding of microstructural evolution mechanisms during FSP can be beneficial for continued growth in the adoption of FSP for demanding applications of future. Towards this goal, this study uses a model binary Cu – 50 at.% Ni alloy to clarify the effect of single and double pass FSP on the microstructural evolution of a coarse grained and compositionally heterogeneous cast microstructure. High energy synchrotron X-ray diffraction, electron backscatter diffraction, and nanoindentation are used to clarify the microstructural evolution due to FSP. The process of compositional homogenization of as-cast segregations is studied by energy dispersive spectroscopy and atom probe tomography. Our results show that a single fast FSP pass at 30 mm.s -1 produces a 100 µm deep layer of submicrometric and hall-petch hardened CuNi grains. The initial cast compositional heterogeneities in a micrometric scale is rapidly transformed to nano-sized domains, mainly confined at grain boundaries. Double pass FSP increases the penetration depth of the processed layer and leads to a 2.9 times grain growth relative to single pass FSP. Grain fragmentation, discontinuous dynamic recrystallization, grain growth, and twinning mechanisms are discussed. In conclusion, these results highlight the value of FSP for ultrafast grain refinement and compositional homogenization of cast alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multimodal Analysis of Spatially Heterogeneous Microstructural Refinement and Softening Mechanisms in Three-Pass Friction Stir Processed Al4Si Alloy

Multiple thermally and thermomechanically induced microstructural refinement mechanisms can be activated in metallic alloys when subjected to solid phase processing methods such as friction stir processing (FSP). In this work, we provide detailed descriptions of the relationship between region-specific microstructural refinement mechanisms and the variation in microhardness, through a systematic and multimodal microstructural characterization of an FSP-processed 75% cold-rolled Al-4 at.% Si model binary alloy. Spatially resolved high-energy synchrotron X-ray diffraction, electron backscattered diffraction, and scanning transmission electron microscopy were used to understand the spatially heterogeneous microstructural evolution due to FSP. Results provide insights into how mechanisms such as static recovery, static recrystallization, dynamic recovery and recrystallization, geometric and continuous dynamic recrystallization, and particle-stimulated static or dynamic grain nucleation may occur heterogeneously in the microstructure as a function of the distance from the stir zone in processed alloys, directly influencing the degree of softening. The systematic analysis of microstructures and hardness in the FSP-processed model binary alloy given in this work highlights the rich microstructural domains that can be uniquely harnessed through solid phase processing of metallic alloys.

Al4Si, Friction Stir Processing, Geometric Dynamic↗
DOE OSTI2020

Structural disorder, sublattice melting, and thermo-elastic properties of anti-perovskite Li 3 OBr under high pressure and temperature

Here, in situ synchrotron x-ray diffraction experiments were conducted in the system Li-O-Br at pressures up to 6.5 GPa and temperatures up to the melting points. The thermal equation of state determined from the P–V–T measurements indicates that crystalline anti-perovskite Li 3 OBr exhibits similar thermo-elastic properties to common salts. At temperatures that are 50–75 °C below the crystal melting, a pre-melting behavior was inferred based on weakened Bragg intensity and a substantial increase in the diffuse scattering. Concurrent with the onset of pre-melting, an anomalous increase in the lattice volume was observed and is interpreted as anion sublattice disorder. These findings support previous ab initio molecular dynamics simulations based on a simple anion interchange mechanism, indicating that structural disorder below crystal melting temperature can be a main driving force for Li-sublattice melting and superionic transition in the Li 3 OBr anti-perovskite.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-pressure structural behavior and elastic properties of U3Si5: A combined synchrotron XRD and DFT study

We present an integrated experimental and theoretical study of the structural behavior of U 3 Si 5 at highpressure conditions using angle-dispersive synchrotron X-ray diffraction (XRD) in a diamond anvil cell (DAC) and density functional theory (DFT) calculations. On increasing pressure, the ambient hexagonal structure of U 3 Si 5 with space group P6/mmm remains stable up to 16.7 GPa, the maximum pressure tested with DAC. The bulk modulus and the a- and c-axial moduli of U 3 Si 5 were experimentally determined to be 126 ± 4 GPa, 173 ± 8 GPa and 79.7 ± 4.3 GPa, respectively. Thus an anisotropy in the axial compressibility of U 3 Si 5 is observed with its c-axis being more compressible than the a-axis. Our DFT calculation results are in general agreement with the experimental values, including reproducing the compressibility anisotropy. A comparison of the bulk modulus of U 3 Si 5 to those of other U-Si compounds reveals a general trend that the bulk modulus of U-Si decreases with increasing U/(U+Si) ratio.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The impact of nickel concentration and stacking fault energy on deformation mechanisms in high-purity austenitic Fe-Cr-Ni alloys

Understanding how composition affects deformation mechanisms in austenitic stainless steels is essential for developing accurate predictive models of stress-induced failures and stress corrosion cracking. Nickel (Ni), an element classified as a critical element, plays a crucial role in these processes. It is important to examine how Ni concentration influences stacking fault energy (SFE) and, consequently, the deformation mechanisms of austenitic stainless steels. However, in commercial stainless steels, the effects of other alloying elements and impurities can obscure Ni's role, complicating efforts to isolate its impact. Here, in this study, we use two high-purity Fe-Cr-Ni alloys to investigate how Ni concentration and SFE interact to alter deformation mechanisms and induce martensitic transformation. By combining in situ synchrotron X-ray diffraction (XRD) tensile testing and post-mortem electron microscopy with density functional theory simulations, we gain precise insights into these phenomena. We find that the Fe18Cr10Ni (wt%) alloy, with its low SFE, exhibits higher stacking fault probability, deformation-induced martensitic transformation, and a lesser increase in dislocation density with plastic strain. In contrast, the Fe18Cr14Ni (wt%) alloy, with its higher SFE, shows enhanced deformation twinning and greater dislocation density with increasing strain. These findings from high-purity ternary alloys provide valuable insights that can guide the search for alternative elements to replace Ni while achieving similar effects on phase stability and deformation behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Delta/Lambda Chirality: From Enantiomers to Diastereomers in Heterometallic Complexes with Chelating Ligands

The Δ/Λ chirality observed in octahedral molecules with chelating ligands represents the major group of “chiral-at-metal” complexes. Upon shifting from mononuclear to polynuclear systems with multiple (≥2) chiral centers, not only enantiomers but also diastereomers should be considered. We present the first, to the best of our knowledge, diastereomeric pairs Δ,Δ,Δ/Λ,Λ,Λ (1) and Δ,Δ,Λ/ Λ,Λ,Δ (2) of the pentanuclear assembly [Mn II (ptac) 3 −Na- Co III (acac) 3 −Na-Mn II (ptac) 3 ] (ptac = 1,1,1-trifluoro-5,5-dimethyl- 2,4-hexanedionate; acac = acetylacetonate). Diastereomers 1 and 2 were isolated in pure form and found to exhibit distinctly different structural characteristics. Importantly, for compounds that are applied as single-source precursors for the quaternary oxide cathode material P2−Na 0.67 Mn 0.67 Co 0.33 O 2 , the diastereomers revealed different thermal behaviors in terms of volatility and thermal stability. Unambiguous assignment of the Mn and Co positions in both diastereomers has been confirmed by the synchrotron X-ray resonant diffraction technique. Oxidation states of metal ions have been verified by the synchrotron X-ray fluorescence spectroscopy. The diastereomerization between 1 and 2 is not taking place in the solid state (crystal-to-crystal), as well as in the gas phase. The transformation between two diastereomers was observed in the solutions of noncoordinating solvents and was related to the polarities of the solvents and diastereomeric molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Zircon-to-reidite phase transition enhanced by minor radiation damage: Implications for hypervelocity impacts

Reidite, a high-pressure phase of zircon, is increasingly identified at terrestrial impact sites. Despite its growing recognition, the potential applications for estimating minimum impact pressure face impediments due to existing discrepancies in the condition of zircon-reidite transformation, controversial models governing the transformation mechanism, and unclear effects of pre-existing radiation damage on reidite formation. Here, we show enhanced reidite formation by synchrotron X-ray diffraction, Raman spectroscopy, and transmission electron microscopy analyses of zircon grains that have experienced different alpha-decay doses from U and Th impurities and subsequent pressurization in diamond anvil cells. Below ~1 × 10 18 α-decay events/g, the α-decay-induced isolated point defects in the still crystalline zircon facilitate the minor atomic readjustments required for reidite formation. However, above this dose, the loss of long-range periodicity in severely damaged or even metamict zircon inhibits the transformation. The enhanced reidite formation by minor radiation damage coincides with the more common occurrence of reidite at impact sites for which the precursor zircon has a relatively lower alphadecay- event dose before the impact event. In addition, the detailed atomic-scale structures of twinned reidite provide unambiguous evidence for a characteristic internal stress-induced martensitic transition. Furthermore, these findings have important implications for interpreting the formation conditions of natural reidite due to the convergence of pressure from the static, shockwave, and natural reidite samples.

58 GEOSCIENCES↗
DOE OSTI2023

Nanolamellar phase transition in an additively manufactured eutectic high-entropy alloy under high pressures

Much is unknown about how phase transitions link to micro-/nano-structures in high-entropy systems, especially under extreme pressure and temperature conditions. This work studies the evolution of dual-phase nanolamellar eutectic high-entropy alloy phases of AlCoCrFeNi 2.1 generated by laser powder-bed fusion (L-PBF) for pressures up to 42 GPa. We compare quasi-hydrostatic high pressure synchrotron x-ray diffraction studies on L-PBF printed cylindrical samples up to 5.5 GPa (large-volume Paris–Edinburgh cell) to those carried out on an L-PBF printed foil in a diamond anvil cell where the pressure reached 42 GPa. Our results show that the initially alternating face-centered cubic (FCC) and body-centered cubic (BCC) nanolamellar structure of AlCoCrFeNi 2.1 transformed into single-phase FCC nanolamellae under high pressure with BCC–FCC phase transformation completion at 21 ± 3 GPa. Our results indicate a diffusionless BCC–FCC transformation in this additively manufactured far-from-equilibrium microstructure and demonstrate that the FCC phase is stable up to very high pressures. The measured equation of state for the FCC phase of AlCoCrFeNi 2.1 is presented up to 42 GPa and shows excellent agreement between the data obtained in large-volume press and diamond anvil cell experiments.

36 MATERIALS SCIENCE↗