Search NASA⌕ Search

SEARCH · Search NASA

Results for “TOUGH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1969

Plane strain fracture toughness.

Plane strain fracture toughness determined for crack notched bend specimens using standard test procedure for specific metallic material property

Srawley, J. E.↗
NASA NTRS1971

Crack toughness evaluation of hot pressed and forged beryllium

Beryllium fracture toughness test specimens were fatigue cracked using reversed cycling with a compression load two to three times the tension load. In worked beryllium, textures may be produced which result in fatigue cracks that are out of plane with the starter notch. Specimens of hot pressed stock exhibited load displacement records which were nonlinear throughout their course. Fracture specimens of both hot pressed and forged stock showed essentially no reduction of thickness and the fracture surfaces were flat and normal to the load axis. However, the stress intensity factor at maximum load increased with decreasing thickness. Load-displacement and electric potential records for the hot pressed beryllium specimens exhibited several anomalies such as negative residual crack mouth displacements and a decrease in electrical potential with increasing load.

Jones, M. H.↗
NASA NTRS1972

Correcting for nonlinear effects in fracture toughness testing.

Expressions for fracture toughness, which include nonlinear effects due to crack front plastic yield and possible small crack extension prior to fracture instability, are obtained for several test specimen configurations. Inclusion of such effects is based on a simple compliance type determination of the total energy rate at onset of fast fracture.

Liebowitz, H.↗
NASA NTRS1972

Plane strain fracture toughness tests on 2.4 and 3.9-inch-thick maraging steel specimens at various yield strength levels.

Tests of bend and compact specimens were conducted according to ASTM Tentative Method E 399-70T on a 200 grade maraging steel over a range of yield strengths from 123 to 234 ksi. The toughness of any given yield strength level was greater for the overaged condition than for the underaged. Some results which met the specimen size requirements of the method were distinctly lower than corresponding results from larger specimens. Inconsistencies in both validation and invalidation of results by the requirement for linearity of the test record were also noted.

Fisher, D. M.↗
NASA NTRS1973

Crack toughness evaluation of hot pressed and forged beryllium.

Fracture toughness tests at room temperature were made on three-point loaded beryllium bend specimens cut from hot pressed block and a forged disk. These specimens had plane proportions conforming to ASTM E 399 and covered a thickness range of from 1/32 to 1/2 in. Two sets of bend specimens were tested, one having fatigue cracks and the other 0.5 mil radius notches. One objective of the investigation was the development of techniques to produce fatigue cracks in accordance with the procedures specified in ASTM E 399. This objective was achieved for the hot pressed material. In plane cracks were not consistently produced in the specimens cut from forged stock.

Jones, M. H.↗
NASA NTRS1974

The circumferentially notched cylindrical bar as a fracture toughness test specimen

A brief review is given of the application of the notched cylinder as a screening specimen for use in sorting materials in respect to their relative levels of plane strain fracture toughness and a discussion of fracture mechanics applications including Irwin's important contributions in this area. In addition, practical problems encountered in application of this specimen will be presented.

Brown, W. F., Jr.↗
NASA NTRS1974

The circumferentially notched cylindrical bar as a fracture toughness test specimen

The present work reviews the use of the notched cylinder as a screening specimen for use in sorting materials with respect to their relative levels of plane strain fracture toughness. Irwin's work in developing an estimate of stress intensity factors for the circumferentially cracked cylinder is reviewed. Some discrepancies between stress intensity factors determined with fatigue cracked notched cylinders and those determined with plate specimens are discussed. Problems in the technical realization of fatigue cracking a specimen are briefly discussed, and the problem of ensuring low eccentricity of loading when testing notch cylindrical specimens is considered. Finally, specimen size requirements for testing are examined.

Brown, W. F., Jr.↗
NASA NTRS1974

The effect of microstructure on the fracture toughness of titanium alloys

The microstructure of the alpha titanium alloy Ti-5Al-2.5Sn and the metastable beta titanium alloy Beta 3 was examined. The material was from normal and extra low interstitial grade plates which were either air-cooled or furnace-cooled from an annealing treatment. Beta 3 was studied in alpha-aged and omega-aged plates which were heat treated to similar strength levels. Tensile and plane strain fracture toughness tests were conducted at room temperature on the alpha-aged material. The microstructure and fracture mechanisms of alloys were studied using optical metallography, electron microscopy, microprobe analyses, and texture pole figures. Future experiments are described.

Vanstone, R. H.↗
NASA NTRS1975

Fracture toughness testing data. A bibliography

This bibliography is comprised of approximately 800 reference citations related to the mechanics of failure in aerospace structures. Most of the references are for documents that include fracture toughness testing data and its application or documents on the availability and usefulness of fracture mechanics analysis methodology. The bibliography represents a search of the literature published in the period April 1962 through April 1974 and is largely limited to documents published in the United States.

Carpenter, J. L., Jr.↗
NASA NTRS1975

Fracture toughness testing data: A technology survey

Technical abstracts for about 90 significant documents relating to fracture toughness testing for various structural materials including information on plane strain and the developing areas of mixed mode and plane stress test conditions are presented. An overview of the state-of-the-art represented in the documents that have been abstracted is included. The abstracts in the report are mostly for publications in the period April 1962 through April 1974. The purpose of this report is to provide, in quick reference form, a dependable source for current information in the subject field.

Stuhrke, W. F.↗