Search NASA⌕ Search

SEARCH · Search NASA

Results for “Technology Transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A review of satellite time transfer technology - Accomplishments and future applications

A brief review of the research accomplishments by NASA in meeting the needs of the space program for precise time in satellite tracking is presented. As a major user of precise time signals for clock synchronization of NASA's worldwide satellite tracking networks, the agency provided much of the necessary impetus for the development of stable frequency sources and time synchronization technology. The precision in time required for both satellite tracking and space science experiments has increased at a rate of about 1 order of magnitude per decade from 1 ms in the 1950's to 100 microsec during the Apollo era in the 1960's to 10 microsec in the 1970's. In the 1980's, when the Tracking and Data Relay Satellite System (TDRSS) comes into operation, satellite timing requirements will be extended to 1 microsec and below. These requirements are needed for spacecraft autonomy and data packeting which are now in active planning stages.

Cooper, R. S.↗
NASA NTRS1981

Technology transfer - LSA project to industry

Program goals, procedural steps, and examples of different situations encountered in the Low-cost Solar Array (LSA) project managed at the Jet Propulsion Laboratory in conjunction with industrial contractors are outlined. The project is intended to result in the production-ready status of photovoltaic panels which produce power at $.70/peak W by 1986. The first phase of the program identified materials and processes which were promising for further development. Phase II served to correct steps and materials which did not work and were important to the array processing. The third phase will bring the processes to technical readiness by demonstration of successful fabrication of modules at a scale which can be increased to commercial production. An information exchange is ongoing between manufacturers and the JPL to alter specific steps which yield results which vary from those found in the laboratory when transferred to the factory.

Gallagher, B. D.↗
NASA NTRS1982

LANDSAT technology transfer to the private and public sectors through community colleges and other locally available institutions, phase 2 program

A program established by NASA with the Environmental Research Institute of Michigan (ERIM) applies a network where the major participants are NASA, universities or research institutes, community colleges, and local private and public organizations. Local users are given an opportunity to obtain "hands on" training in LANDSAT data analysis and Geographic Information System (GIS) techniques using a desk top, interactive remote analysis station (RAS). The RAS communicates with a central computing facility via telephone line, and provides for generation of land use and land suitability maps and other data products via remote command. During the period from 22 September 1980 - 6 March 1982, 15 workshops and other training activities were successfully conducted throughout Michigan providing hands on training on the RAS terminals for 250 or more people and user awareness activities such as exhibits and demonstrations for 2,000 or more participants.

Rogers, R. H.↗
NASA NTRS1983

Considerations of technology transfer barriers in the modification of strategic superalloys for aircraft turbine engines

A typical innovation-to-commercialization process for the development of a new hot section gas turbine material requires one to two decades with attendant costs in the tens of millions of dollars. This transfer process is examined to determine the potential rate-controlling steps for introduction of future low strategic metal content alloys or processes. Case studies are used to highlight the barriers to commercialization as well as to identify the means by which these barriers can be surmounted. The opportunities for continuing joint government-university-industry partnerships in planning and conducting strategic materials R&D programs are also discussed.

Stephens, J. R.↗
NASA NTRS1983

Research in space commercialization, technology transfer and communications, vol. 2

Spectrum management, models for evaluating communications systems, and implications of communications regulations for NASA are considered as major parts of communications policy. Marketing LANDSAT products in developing countries, a political systems analysis of LANDSAT, and private financing and operation of the space operations center (space station) are discussed. Investment requirements, risks, government support, and other primary business and management considerations are examined.

Dunn, D. A.↗
NASA NTRS1982

User interface design of software tool system as a technology transfer vehicle

Design considerations of an on going research project for developing an effective and easy to use tool system that supports entire maintenance phases are introduced. The primary focus is the design of an intelligent user interface mechanism. By analyzing why existing tools and tool systems are not used very effectively, we can define user requirements for the user interface mechanisms, specify design criteria of user interface functions, and introduce some features of the implementation. Because this project is still in process, intermediate evaluation and expected effectiveness are discussed.

Miyamoto, I.↗
NASA NTRS1987

Study of helium transfer technology for STICCR: Fluid management

The Space Infrared Telescope Facility (SIRTF) is a long life cryogenically cooled space based telescope for infrared astronomy from 2 to 700 microns currently under study and planned for launch in the mid 90's. SIRTF will operate as a multi-user facility, initially carrying 3 instruments at the focal plane. It will be cooled to below 2 K by superfluid liquid helium to achieve radiometric sensitivity limited only by the statistical fluctuations in the natural infrared background radiation over most of its spectral range. The lifetime of the mission will be limited by the lifetime of the liquid helium supply, and is currently baselined to be 2 years. Candidates are reviewed for a liquid management device to be used in the resupply of liquid helium, and for the selection of an appropriate candidate.

Frank, D. J.↗
NASA NTRS1989

Technology transfer in software engineering

The University of Houston-Clear Lake is the prime contractor for the AdaNET Research Project under the direction of NASA Johnson Space Center. AdaNET was established to promote the principles of software engineering to the software development industry. AdaNET will contain not only environments and tools, but also concepts, principles, models, standards, guidelines and practices. Initially, AdaNET will serve clients from the U.S. government and private industry who are working in software development. It will seek new clients from those who have not yet adopted the principles and practices of software engineering. Some of the goals of AdaNET are to become known as an objective, authoritative source of new software engineering information and parts, to provide easy access to information and parts, and to keep abreast of innovations in the field.

Bishop, Peter C.↗
NASA NTRS1991

Welding technology transfer task/laser based weld joint tracking system for compressor girth welds

Sensors to control and monitor welding operations are currently being developed at Marshall Space Flight Center. The laser based weld bead profiler/torch rotation sensor was modified to provide a weld joint tracking system for compressor girth welds. The tracking system features a precision laser based vision sensor, automated two-axis machine motion, and an industrial PC controller. The system benefits are elimination of weld repairs caused by joint tracking errors which reduces manufacturing costs and increases production output, simplification of tooling, and free costly manufacturing floor space.

Looney, Alan↗
NASA NTRS1994

Dual Use Space Technology Transfer Conference Paper

New textile fibers have been developed or modified to meet the complex and constraining criteria of space applications. The most common of these criteria are light weight, nonflammability or flame retardancy, and high strength and durability in both deep space environment and the oxygen enriched crew bay area of the spacecraft. The fibers which successfully pass the tests of flammability and toxicity, and display the desired mechanical properties are selected for space applications. Such advanced fibers developed for the Crew and Thermal Systems Division (CTSD) at the Johnson Space Center include 'Beta' fiber, heat stabilized polybenzimidazole and polyimide, as well as modified aramid Durette(TM), multi-fibrous Ortho(TM) fabric, and flame resistant cotton. The physical, mechanical, and chemical properties of these fibers are briefly discussed. The testing capabilities in the CTSD laboratory to ascertain some of the properties of these and other fibrous materials are also discussed. Most of these materials developed for spacecraft, space suit, and flight equipment applications have found other commercial applications. These advanced textile fibers are used mostly for aircraft, transportation, public buildings, hospitals, and protective clothing applications.

Orndoff, Evelyne↗
NASA NTRS1998

Midcourse Space Experiment Data Certification and Technology Transfer

The Midcourse Space Experiment spacecraft, launched April 24, 1996, is expected to have a 5 year useful lifetime with a 12 month lifetime for the cryogenically cooled IR sensor. A pre-launch, ground based calibration of the instruments provided a basis for the pre-launch certification of the Level 2 data base these instruments produce. With the spacecraft in-orbit the certification of the instrument's Level 2 data base is being extended to the in-orbit environment.

Pollock, David B.↗
NASA NTRS1998

Thickness-Independent Ultrasonic Imaging Applied to Abrasive Cut-Off Wheels: An Advanced Aerospace Materials Characterization Method for the Abrasives Industry. A NASA Lewis Research Center Technology Transfer Case History

Abrasive cut-off wheels are at times unintentionally manufactured with nonuniformity that is difficult to identify and sufficiently characterize without time-consuming, destructive examination. One particular nonuniformity is a density variation condition occurring around the wheel circumference or along the radius, or both. This density variation, depending on its severity, can cause wheel warpage and wheel vibration resulting in unacceptable performance and perhaps premature failure of the wheel. Conventional nondestructive evaluation methods such as ultrasonic c-scan imaging and film radiography are inaccurate in their attempts at characterizing the density variation because a superimposing thickness variation exists as well in the wheel. In this article, the single transducer thickness-independent ultrasonic imaging method, developed specifically to allow more accurate characterization of aerospace components, is shown to precisely characterize the extent of the density variation in a cut-off wheel having a superimposing thickness variation. The method thereby has potential as an effective quality control tool in the abrasives industry for the wheel manufacturer.

Roth, Don J.↗