Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A model for the temperature inversion within the atmosphere of Saturn

A model for the temperature inversion within the atmosphere of Saturn is proposed and is shown to be consistent with photometric data in the 17- to 25-micron region. The proposed model incorporates solar heating by some 'aerosol', with the aerosol heating per unit mass of the atmosphere being uniformly distributed throughout that portion of the atmosphere overlying the upper cloud deck. For a methane-to-hydrogen mixing ratio of 0.0007, the model results suggest that 20% of the incident solar radiation is absorbed by the aerosol, while this is reduced to 16% for an enhanced methane mixing ratio of 0.0021.

Tokunaga, A.↗

Impact of three-dimensional hot-spot flow asymmetry on ion-temperature measurements in inertial confinement fusion experiments

Three-dimensional (3-D) implosion asymmetries lead to signficant variations in ion-temperature measurements in inertial confinement fusion experiments. We present an analytical method to generalize the physical properties of velocity variance in the Brysk ion-temperature model. This analysis provides a consistent explanation for the 3-D effects of inferred ion-temperature variations for various single modes and multimodes modeled by the deceleration-phase hydrocode DEC3D and the neutron transport code IRIS3D . The effect of the hot-spot ow asymmetry on variations in ion-temperature measurement is shown uniquely determined by a complete set of six hot-spot flow parameters. An approximated solution to the minimum inferred ion temperature is derived and shown to be close to the thermal ion temperature for low mode l = 1, which exhibits the largest anisotropic velocity variance in the single-mode spectrum. In conclusion, the isotropic velocity variance for low mode l = 2 is shown to result in the minimum inferred ion temperatures being well above the thermal ion temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

International Photovoltaic Modeling Intercomparison [Slides]

Irradiance transposition models seem to perform well, except the Isotropic with -11.25 W/m 2 underestimation. Most temperature models could not capture behavior when ΔΤ between module and ambient is negative. Uncertainties due to derate factors: modelers overbudgeted resulting in significant power underestimation; maybe ~10% is appropriate for commercial systems but not lab-scale? Most software and models cluster together showing good reproducibility among participants. Modeler’s skills seem to be more important than the PV model itself (flat efficiency with irradiance, positive power temperature coefficients, etc.). Results and best practices will be communicated in a journal article.

14 SOLAR ENERGY↗

The coupled SYK model at finite temperature

Sachdev-Ye-Kitaev (SYK) model, which describes N randomly interacting Majorana fermions in 0+1 dimension, is found to be an solvable UV-complete toy model for holographic duality in nearly AdS 2 dilaton gravity. Ref. [1] proposed a modified model by coupling two identical SYK models, which at low-energy limit is dual to a global AdS 2 geometry. This geometry is an “eternal wormhole" because the two boundaries are causally connected. Increasing the temperature drives a Hawking-Page like transition from the eternal wormhole geometry to two disconnected black holes with coupled matter field. To gain more understanding of the coupled SYK model, in this work, we study the finite temperature spectral function of this system by numerical solving the Schwinger-Dyson equation in real-time. We find in the low-temperature phase the system is well described by weakly interacting fermions with renormalized single-particle gap, while in the high temperature phase the system is strongly interacting and the single-particle peaks merge. We also study the q dependence of the spectral function.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Explicit Modeling of Pebble Temperature in the Porous-medium Framework for Pebble-bed Reactors Applications

In this study, an explicit model for pebble temperature calculations in the framework of a porous-medium approach has been developed and implemented in the SAM code. The solid-phase energy conservation equation, including the explicit modeling of pebble temperature, is a multi-scale model, which can predict the macroscopic (pebble-bed) and microscopic (pebble) temperature distributions under both steady-state and transient conditions. Extensive and successful code verifications and demonstrations have been performed for this newly developed model. By explicitly modeling pebble temperatures, this new model addresses a major deficiency of the previously implemented model, which assumed a local solid-phase thermal equilibrium that is not appropriate for pebble-bed reactor design and safety analysis applications.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analysis of ultrafast magnetization switching dynamics in exchange-coupled ferromagnet–ferrimagnet heterostructures

Magnetization switching in ferromagnets has so far been limited to the current-induced spin–orbit–torque effects. Recent observation of helicity-independent all-optical magnetization switching (HI-AOS) in an exchange-coupled ferromagnet–ferrimagnet (FM-FEM) heterostructures expanded the range and applicability of such ultrafast heat-driven magnetization switching. Here we report the element-resolved HI-AOS dynamics of such an exchange-coupled system, using a modified microscopic three-temperature model. We have studied the effect of (i) the Curie temperature of the FM, (ii) FEM composition, (iii) the long-range Ruderman–Kittel–Kasuya–Yosida (RKKY) exchange-coupling strength, and (iv) the absorbed optical energy on the element-specific time-resolved magnetization dynamics. The phase-space of magnetization illustrates how the RKKY coupling strength and the absorbed optical energy influence the switching time. Our analysis demonstrates that the threshold switching energy depends on the composition of the FEM and the switching time depends on the Curie temperature of the FM as well as RKKY coupling strength. Importantly, this simulation anticipates new insights into developing faster and more energy-efficient spintronics devices.

36 MATERIALS SCIENCE↗

Proposal for a Vehicle Level Test Procedure to Measure Air Conditioning Fuel Use

The air-conditioning (A/C) compressor load significantly impacts the fuel economy of conventional vehicles and the fuel use/range of plug-in hybrid electric vehicles (PHEV). A National Renewable Energy Laboratory (NREL) vehicle performance analysis shows the operation of the air conditioner reduces the charge depletion range of a 40-mile range PHEV from 18% to 30% in a worst case hot environment. Designing for air conditioning electrical loads impacts PHEV and electric vehicle (EV) energy storage system size and cost. While automobile manufacturers have climate control procedures to assess A/C performance, and the U.S. EPA has the SCO3 drive cycle to measure indirect A/C emissions, there is no automotive industry consensus on a vehicle level A/C fuel use test procedure. With increasing attention on A/C fuel use due to increased regulatory activities and the development of PHEVs and EVs, a test procedure is needed to accurately assess the impact of climate control loads. A vehicle thermal soak period is recommended, with solar lamps that meet the SCO3 requirements or an alternative heating method such as portable electric heaters. After soaking, the vehicle is operated over repeated drive cycles or at a constant speed until steady-state cabin air temperature is attained. With this method, the cooldown and steady-state A/C fuel use are measured. This method can be run at either different ambient temperatures to provide data for the GREEN-MAC-LCCP model temperature bins or at a single representative ambient temperature. Vehicles with automatic climate systems are allowed to control as designed, while vehicles with manual climate systems are adjusted to approximate expected climate control settings. An A/C off test is also run for all drive profiles. This procedure measures approximate real-world A/C fuel use and assess the impact of thermal load reduction strategies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Improving Hydrological Simulation in the Upper Mississippi River Basin through Enhanced Freeze-Thaw Cycle Representation

Freeze-thaw cycles are important processes relevant to terrestrial hydrological cycling. However, the representation of freeze-thaw cycle has been often simplified in large scale watershed models. The Soil and Water Assessment Tool (SWAT), which has been widely used to understand and assess hydrologic budgets and water resources management, employs a simplified empirical approach to estimate soil temperature and determine the freezing and thawing status of soils. Here, we compared the performance of a physically-based soil temperature module and the built-in empirical approach in SWAT against field measurements at surface and 5, 10, 20, 50, and 100 cm depths at six stations of the U.S. Climate Reference Network (USCRN) within the Upper Mississippi River Basin (UMRB). In general, SWAT consistently underestimated winter soil temperatures and overestimated frozen days at all soil depths, while the modified version of SWAT (equipped with the physically-based soil temperature model; referred to as TSWAT) pronouncedly reduced the bias in estimated winter soil temperatures and frozen days compared with SWAT. Model performance assessment is conducted with three statistical coefficients, i.e., Bias (?), coefficient of determination (R2), and Nash-Sutcliffe coefficient (NS). Statistical analyses show that TSWAT accurately simulated surface and soil temperatures at the five depths with R2 and NS values greater than 0.82 at most sites, and Bias values were generally within the range of -1 to 1? during winter and ranged between -2.09 and 2.58 ? in non-winter seasons. The differences in freeze-thaw cycle representation between SWAT and TSWAT translate into noticeable discrepancies in simulated key hydrologic variables, such as surface runoff, percolation, and baseflow. Compared against long-term observed streamflow (1980-2015), TSWAT outperformed SWAT in capturing variations in monthly streamflow in both winter and non-winter seasons. These results and analyses highlight the value of improving freeze-thaw cycle representation for enhanced hydrologic modeling in large watersheds that are subject to freeze-thaw cycles.

soil temperature, freeze-thaw cycles, streamflow↗

NON-EQUILIBRIUM ELECTRONS IN THE OUTSKIRTS OF GALAXY CLUSTERS

The analysis of X-ray and Sunyaev–Zel’dovich measurements of the intracluster medium (ICM) assumes that electrons are in thermal equilibrium with ions in the plasma. However, in the outskirts of galaxy clusters, the electron–ion equilibration timescale can become comparable to the Hubble time, leading to systematic biases in cluster mass estimates and mass-observable scaling relations. To quantify an upper limit of the impact of non-equilibrium electrons, we use a mass-limited sample of simulated galaxy clusters taken from a cosmological simulation with a two-temperature model that assumes the Spitzer equilibration time for the electrons and ions. We show that the temperature bias is more pronounced in more massive and rapidly accreting clusters. For the most extreme case, we find that the bias is of the order of 10% at half of the cluster virial radius and increases to 40% at the edge of the cluster. Gas in filaments is less susceptible to the non-equilibrium effect, leading to azimuthal variations in the temperature bias at large cluster-centric radii. Using mock Chandra observations of simulated clusters, we show that the bias manifests in ultra-deep X-ray observations of cluster outskirts and quantify the resulting biases in hydrostatic mass and cluster temperature derived from these observations. We provide a mass-dependent fitting function for the temperature bias profile, which can be useful for modeling the effect of electron-ion equilibration in galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Riparian vegetation shade restoration and loss effects on recent and future stream temperatures

River temperatures are expected to increase this century harming species requiring cold-water habitat unless restoration activities protect or improve habitat availability. Local shading by riparian vegetation can cool water temperatures, but uncertainty exists over the scaling of this local effect to larger spatial extents. Here, we evaluate this issue using a regional spatial stream network temperature model with covariates representing shade effects to predict mean August stream temperatures across 78,195 km of tributaries flowing into the Columbia River in the northwestern United States. We evaluate nine scenarios predicting stream temperatures for three riparian shade conditions (current, restored, and no riparian vegetation) within three different climate periods (2000s, 2040s, and 2080s). Results suggest riparian shade restoration (2000s climate) could decrease mean August stream temperatures by 0.62°C across the study network. Under the same restored shade conditions, temperature predictions for tributaries at their confluence with the Columbia River range from 0.02 to 2.08°C cooler than under current shade conditions. The climate warming effect predicted for the 2040s and 2080s, however, is greater than the cooling effect from restoring riparian shade. Streams less than 10-m bankfull width cooled more frequently with riparian shade restoration. In Oregon, the proportion of fish habitat for salmon and trout rearing and migration that meet temperature numeric water quality criteria could be increased by 20% under restored shade conditions although net habitat declines may still occur in the future. We conclude riparian vegetation restoration could partially mitigate future warming and help maintain cold-water habitats that function as thermal refuges if implemented strategically.

54 ENVIRONMENTAL SCIENCES↗

U(1) slave-particle study of the finite-temperature doped Hubbard model in one and two dimensions

Research Highlights: > Mean-field U(1) slave-particle description of Hubbard model. > Fractionalized phases at finite-temperature in Hubbard model. > Spectral function of 1d and 2d Hubbard model. - Abstract: One-dimensional systems have unusual properties such as fractionalization of degrees of freedom. The occurrence of similar phenomena in higher dimensional systems has been considered in the literature for the description of quantum spin liquids and some non-fermi liquid phases. In this work we construct a mean field (MF) theory of the Hubbard model which is based on a representation of the electronic fields that explicitly introduces a separation of the charge and spin degrees of freedom (the so-called Zou-Anderson transformation) and study the finite-temperature phase diagram for the Hubbard chain and square lattice. The mean field variables are defined along the links of the underlying lattice. We obtain the spectral function and identify the regions of higher spectral weight with the fractionalized fermionic (spin) and bosonic (charge) excitations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison Between the f-Electron and Conduction-Electron Density of States in the Falicov-Kimball Model at Low Temperature

The spinless Falicov-Kimball model is one of the simplest models of many-body physics. While the conduction-electron density of states is temperature independent in the normal state, the f -electron density of states is strongly temperature dependent—it has an orthogonality catastrophe singularity in the metallic phase and is gapped in the insulating phase. The question we address here is whether the spectral gap is the same for both electron species as T → 0. Finally, we find strong evidence to indicate that the answer is affirmative.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A reduced model for ion temperature gradient turbulent transport in helical plasmas

A novel reduced model for ion temperature gradient (ITG) turbulent transport in helical plasmas is presented. The model enables one to predict nonlinear gyrokinetic simulation results from linear gyrokinetic analyses. It is shown from nonlinear gyrokinetic simulations of the ITG turbulence in helical plasmas that the transport coefficient can be expressed as a function of the turbulent fluctuation level and the averaged zonal flow amplitude. Then, the reduced model for the turbulent ion heat diffusivity is derived by representing the nonlinear turbulent fluctuations and zonal flow amplitude in terms of the linear growth rate of the ITG instability and the linear response of the zonal flow potentials. It is confirmed that the reduced transport model is in a good agreement with nonlinear gyrokinetic simulation results for high ion temperature plasmas in the large helical device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exfoliation Propensity of Oxide Scale in Heat Exchangers Used for Supercritical CO2 Power Cycles

Supercritical CO2 (sCO2) Brayton cycle systems offer the possibility of improved efficiency in future fossil energy power generation plants operating at temperatures of 650 C and above. As there are few data on the oxidation/corrosion behavior of structural alloys in sCO2 at these temperatures, modeling to predict the propensity for oxide exfoliation is not well developed, thus hindering materials selection for these novel cycles. The ultimate goal of this effort is to provide needed data on scale exfoliation behavior in sCO2 for confident alloy selection. To date, a model developed by ORNL and EPRI for the exfoliation of oxide scales formed on boiler tubes in high-temperature, high-pressure steam has proven useful for managing exfoliation in conventional steam plants. A major input provided by the model is the ability to predict the likelihood of scale failure and loss based on understanding of the evolution of the oxide morphologies and the conditions that result in susceptibility to exfoliation. This paper describes initial steps taken to extend the existing model for exfoliation of steam-side oxide scales to sCO2 conditions. The main differences between high-temperature, high-pressure steam and sCO2 that impact the model involve (i) significant geometrical differences in the heat exchangers, ranging from standard pressurized tubes seen typically in steam-producing boilers to designs for sCO2 that employ variously-curved thin walls to create shaped flow paths for extended heat transfer area and small channel cross-sections to promote thermal convection and support pressure loads; (ii) changed operating characteristics with sCO2 due to the differences in physical and thermal properties compared to steam; and (iii) possible modification of the scale morphologies, hence properties that influence exfoliation behavior, due to reaction with carbon species from sCO2. The numerical simulations conducted were based on an assumed sCO2 operating schedule and several generic heat exchanger channel shapes and cross-sectional areas. Implications for the evolution of stresses in the oxide scales formed on sCO2 heat exchangers, and ensuing critical oxide thicknesses for exfoliation, were derived and compared with expectations for an equivalent conventional tubular heat exchanger in a steam cycle (for a given alloy).

Sabau, Adrian S↗

Spectral and Temporal Characteristics of X-Ray-Bright Stars in the Pleiades

We follow up our deep ROSAT imaging survey of the Pleiades (Stauffer et al. 1994) with an analysis of the spectral and temporal characteristics of the X-ray-bright stars in the Pleiades. Raymond & Smith (1977) one and two-temperature models have been used to fit the position-sensitive proportional counter (PSPC) pulse-height spectra of the dozen or so brightest sources associated with late-type Pleiades members. The best-fit temperatures suggest hot coronal temperatures for K, M, and rapidly rotating G stars, and cooler temperatures for F and slowly rotating G stars. In order to probe the many less X-ray-luminous stars, we have generated composite spectra by combining net counts from all Pleiades members according to spectral type and rotational velocity. Model fits to the composite spectra confirm the trend seen in the individual spectral fits. Particularly interesting is the apparent dependence of coronal temperature on L(sub x)/L(sub bol). A hardness-ratio analysis also confirms some of these trends. The PSPC data have also revealed a dozen or so strong X-ray flares with peak X-ray luminosities in excess of approx. 10(exp 30) ergs/sec. We have modeled the brightest of these flares with a simple quasi-static cooling loop model. The peak temperature and emission measure and the inferred electron density and plasma volume suggest a very large scale flaring event. The PSPC data were collected over a period of approx. 18 months, allowing us to search for source variability on timescales ranging from less than a day (in the case of flares) to more than a year between individual exposures. On approximately year-long timescales, roughly 25% of the late-type stars are variable. Since the Pleiades was also intensively monitored by the imaging instruments on the Einstein Observatory, we have examined X-ray luminosity variations on the 10 yr timescale between Einstein and ROSAT and find that up to 40% of the late-type stars are X-ray variable. Since there is only marginal evidence for increased variability on decade-long timescales, the variability observed on long and short timescales may have a common physical origin.

Gagne, Marc↗

High-Temperature Heat Pump Model Documentation and Case Studies

High temperature heat pumps (HTHPs) have the potential to serve two valuable functions in the U.S. industry. First, by valorizing and elevating waste heat streams, HTHPs can improve industrial energy efficiency. Second, by electrifying process heat generation, HTHPs can replace combustion technologies with less carbon-intensive sources of energy and reduce industrial greenhouse gas emissions. In certain applications, the combination of increased efficiency, cost savings, and emissions reduction makes HTHPs a promising component of strategies for industrial electrification and clean energy transition. Researchers at NREL have developed a HTHP model. This model has both a physics-based performance estimation component and an economic evaluation component designed to demonstrate the potential economic competitiveness of HTHPs. This document has three main sections. First, an overview of HTHPs is provided as a literature review of relevant information to provide the reader with state-of-the-art information. Second, a description of the HTHP model is provided along with detailed instructions about how to use the model. Third, case studies are provided to showcase the deployment of the HTHP model.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Thermal evolution of the moon.

The thermal history and current state of the lunar interior are investigated using constraints imposed by recent geological and physical data. Theoretical temperature models are computed taking into account different initial conditions, heat sources, differentiation and simulated convection. To account for the early formation of the lunar highlands, the time duration of magmatism and present-day temperatures estimated from lunar electrical conductivity profiles, it is necessary to restrict initial temperatures and abundances of radioactive elements. Successful models require that the outer half of the moon initially heated to melting temperatures, probably due to rapid accretion. Differentiation of radioactive heat sources toward the lunar surface occurred during the first 1.6 billion years. Temperatures in the outer 500 km are currently low, while the deep interior (radius less than 700 to 1000 km) is warmer than 1000 C, and is of primordial material.

Toksoz, M. N.↗