Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature variability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

An Update on the Lithium-Ion Cell Low-Earth-Orbit Verification Test Program

A Lithium-Ion Cell Low-Earth-Orbit Verification Test Program is being conducted by NASA Glenn Research Center to assess the performance of lithium-ion (Li-ion) cells over a wide range of low-Earth-orbit (LEO) conditions. The data generated will be used to build an empirical model for Li-ion batteries. The goal of the modeling will be to develop a tool to predict the performance and cycle life of Li-ion batteries operating at a specified set of mission conditions. Using this tool, mission planners will be able to design operation points of the battery system while factoring in mission requirements and the expected life and performance of the batteries. Test conditions for the program were selected via a statistical design of experiments to span a range of feasible operational conditions for LEO aerospace applications. The variables under evaluation are temperature, depth-of-discharge (DOD), and end-of-charge voltage (EOCV). The baseline matrix was formed by generating combinations from a set of three values for each variable. Temperature values are 10 C, 20 C and 30 C. Depth-of-discharge values are 20%, 30% and 40%. EOCV values are 3.85 V, 3.95 V, and 4.05 V. Test conditions for individual cells may vary slightly from the baseline test matrix depending upon the cell manufacturer s recommended operating conditions. Cells from each vendor are being evaluated at each of ten sets of test conditions. Cells from four cell manufacturers are undergoing life cycle tests. Life cycling on the first sets of cells began in September 2004. These cells consist of Saft 40 ampere-hour (Ah) cells and Lith ion 30 Ah cells. These cells have achieved over 10,000 cycles each, equivalent to about 20 months in LEO. In the past year, the test program has expanded to include the evaluation of Mine Safety Appliances (MSA) 50 Ah cells and ABSL battery modules. The MSA cells will begin life cycling in October 2006. The ABSL battery modules consist of commercial Sony hard carbon 18650 lithium-ion cells configured in series and parallel combinations to create nominal 14.4 volt, 3 Ah packs (4s-2p). These modules have accumulated approximately 3000 cycles. Results on the performance of the cells and modules will be presented in this paper. The life prediction and performance model for Li-ion cells in LEO will be built by analyzing the data statistically and performing regression analysis. Cells are being cycled to failure so that differences in performance trends that occur at different stages in the life of the cell can be observed and accurately modeled. Cell testing is being performed at the Naval Surface Warfare Center in Crane, IN.

Reid, Concha M.↗
NASA NTRS1985

Three-dimensional convection in horizontal cylinders - Numerical solutions and comparison with experimental and analytical results

The results of a three-dimensional numerical simulation of Boussinesq free convection in a horizontal differentially heated cylinder are presented. The computation was based on a Samarskii-Andreyev scheme (described by Leong, 1981) and a false-transient advancement in time, with vorticity, velocity, and temperature as dependent variables. Solutions for velocity and temperature distributions were obtained for Rayleigh numbers (based on the radius) Ra = 74-18,700, thus covering the core- and boundary-layer-driven regimes. Numerical solutions are compared with asymptotic analytical solutions and experimental data. The numerical results well represent the complex three-dimensional flows found experimentally.

Smutek, C.↗
NASA NTRS2022

Haiti Agriculture: Utilizing NASA Earth Observations to Evaluate the Success of Reforestation Practices in Haiti

Haiti is one of the world’s most deforested and environmentally degraded countries. Over the past 30 years, the Haiti Reforestation Partnership (HRP) has provided resources, education, and expertise to support reforestation work in Haiti. The HRP has planted over 15 million trees through their partnership with Comprehensive Development Program (CODEP). However, they have yet to conduct a comprehensive analysis of forest stand survival. The NASA DEVELOP team partnered with the HRP to aid their future silvicultural decisions using satellite imagery. Through the creation of the Monitoring of Vegetation Presence (MVP) tool in Google Earth Engine, the team produced a time series showing trends in enhanced vegetation index (EVI) from 1984 to 2021, as well as a habitat suitability map using a general model for all tree species. These provided the partner with visuals to communicate their reforestation efforts and guidance on where to apply their future efforts. The team utilized Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), Landsat 9 OLI-2 and Sentinel-2 Multispectral Instrument (MSI) vegetation indices as indicators of stand success over time. The team also incorporated WorldClim bioclimatic variables such as precipitation and temperature, Centre National de L’Information Geo-Spatiale (CNIGS) Airborne Lidar elevation, and ancillary datasets areas suitable for future reforestation efforts. Overall, the time series showed that the demonstration forest increased in EVI at a greater rate than the surrounding area and the habitat model suggested there are 49,000 hectares of suitable habitat for planting using slope, aspect and temperature as predictor variables.

Kelli Roberts↗
NASA NTRS2005

National Combustion Code Used To Study the Hydrogen Injector Design for Gas Turbines

Hydrogen, in the gas state, has been proposed to replace Jet-A (the fuel used for commercial jet engines) as a fuel for gas turbine combustion. For the combustion of hydrogen and oxygen only, water is the only product and the main greenhouse gas, carbon dioxide, is not produced. This is an obvious benefit of using hydrogen as a fuel. The situation is not as simple when air replaces oxygen in the combustion process. (Air is mainly a mixture of oxygen, nitrogen, and argon. Other components comprise a very small part of air and will not be mentioned.) At the high temperatures found in the combustion process, oxygen reacts with nitrogen, and this produces nitrogen oxide compounds, or NOx--the main component of atmospheric smog. The production of NOx depends mainly on two variables: the temperature at which combustion occurs, and the length of time that the products of combustion stay, or reside, in the combustor. Starting from a lean (excess air) air-to-fuel ratio, the goal of this research was to minimize hot zones caused by incomplete premixing and to keep the residence time short while producing a stable flame. The minimization of these two parameters will result in low- NOx hydrogen combustion.

Iannetti, Anthony C.↗
NASA NTRSDate not supplied

Deriving Climate Change Signal from Hyperspectral Sounders Using Spectral Fingerprinting Method

Hyperspectral observations from satellite-based sensors provide high information content for the Earth’s atmospheric temperature, water vapor and trace gas vertical profiles. We have developed a radiometrically consistent spectral fingerprinting method to derive climate change signals from Aqua AIRS/AMSU and S-NPP CrIS/ATMS data. The climate variables include temperature and water vapor profiles, cloud, trace gases, and surface skin temperature. The radiative kernels obtained via a single field of view physical retrieval algorithm under all-sky conditions. A key component to this work is a Principal Component-based Radiative Transfer Model (PCRTM). It is 4 orders of magnitude faster than a line-by-line radiative transfer model while keeping a similar accuracy (0.03 K RMS errors with close to zero bias). The PCRTM includes multiple scattering of clouds and non-thermodynamics equilibrium of CO2 in the RT calculations. Instead of quantifying the radiometric differences between AIRS/AMSU and CrIS/ATMS measurements directly using Simultaneous Nadir Overpass (SNO) or Double Difference Technique (DDT), we use the radiometric consistent fingerprinting scheme to derive two sets of space-time averaged anomalies from the Level 1 data of AIRS/AMSU and CrIS/ATMS. The derived anomalies in geophysical space will form a long-term, stable, and continuous climate data record. We can further infer the causes of any offset or drift by studying the differences between two overlapping data sets. For example, the offset in surface skin temperature anomaly time series will most likely caused by the Blackbody temperature calibration errors of the sounder instruments.

climate↗
NASA NTRS2003

Connecting Atmospheric Science and Atmospheric Models for Aerocaptured Missions to Titan and the Outer Planets

Many atmospheric measurement systems, such as the sounding instruments on Voyager, gather atmospheric information in the form of temperature versus pressure level. In these terms, there is considerable consistency among the mean atmospheric profiles of the outer planets Jupiter through Neptune, including Titan. On a given planet or on Titan, the range of variability of temperature versus pressure level due to seasonal, latitudinal, and diurnal variations is also not large. However, many engineering needs for atmospheric models relate not to temperature versus pressure level but atmospheric density versus geometric altitude. This need is especially true for design and analysis of aerocapture systems. Aerocapture drag force available for aerocapture is directly proportional to atmospheric density. Available aerocapture "corridor width" (allowable range of atmospheric entry angle) also depends on height rate of change of atmospheric density, as characterized by density scale height. Characteristics of hydrostatics and the gas law equation mean that relatively small systematic differences in temperature-versus-pressure profiles can integrate at high altitudes to very large differences in density-versus-altitude profiles. Thus a given periapsis density required to accomplish successful aerocapture can occur at substantially different altitudes (approx. 150 - 300 km) on the various outer planets, and significantly different density scale heights (approx. 20 - 50 km) can occur at these periapsis altitudes. This paper will illustrate these effects and discuss implications for improvements in atmospheric measurements to yield significant impact on design of aerocapture systems for future missions to Titan and the outer planets. Relatively small- scale atmospheric perturbations, such as gravity waves, tides, and other atmospheric variations can also have significant effect on design details for aerocapture guidance and control systems. This paper will also discuss benefits that would result from improved understanding of Titan and outer planetary atmospheric perturbation characteristics. Details of recent engineering-level atmospheric models for Titan and Neptune will be presented, and effects of present and future levels of atmospheric uncertainty and variability characteristics will be examined.

Justus, C. G.↗
NASA NTRS2010

Temperature Responses to Spectral Solar Variability on Decadal Time Scales

Two scenarios of spectral solar forcing, namely Spectral Irradiance Monitor (SIM)-based out-of-phase variations and conventional in-phase variations, are input to a time-dependent radiative-convective model (RCM), and to the GISS modelE. Both scenarios and models give maximum temperature responses in the upper stratosphere, decreasing to the surface. Upper stratospheric peak-to-peak responses to out-of-phase forcing are approx.0.6 K and approx.0.9 K in RCM and modelE, approx.5 times larger than responses to in-phase forcing. Stratospheric responses are in-phase with TSI and UV variations, and resemble HALOE observed 11-year temperature variations. For in-phase forcing, ocean mixed layer response lags surface air response by approx.2 years, and is approx.0.06 K compared to approx.0.14 K for atmosphere. For out-of-phase forcing, lags are similar, but surface responses are significantly smaller. For both scenarios, modelE surface responses are less than 0.1 K in the tropics, and display similar patterns over oceanic regions, but complex responses over land.

Cahalan, Robert F.↗
NASA NTRS1980

Theoretical mean colors for RR Lyrae variables

A hydrodynamically pulsating 0.6 solar mass model of a typical RR Lyrae variable was studied with a radiation transport-hydrodynamic computer program to predict theoretical T sub 3 and colors at many phases and to find the proper methods for getting mean colors and the consequent mean effective temperatures. The variable Eddington radiation approximation method was used with gray and with multifrequency absorption coefficients to represent the radiation flow in the outer optically thin layers. Comparison between observed and computed B-V colors indicate that these low Z population 2 models are reasonably accurate using King 1A composition opacities. The well known Oke, Giver, and Searle relation between B-V and T sub e reproduced. Mean colors were found by four different averaging methods. The method that gives a mean color and the mean T sub e closest to the nonpulsating model was the separate intensity means of B and V.

Davis, C. G.↗
NASA NTRS1992

How well is Martian ozone inferred with reflectance spectroscopy?

The Mariner 9 UV spectrometer scanned from 2100 to 3500 Angstroms in one of its two spectral channels every 3 seconds with a spectral resolution of 15 Angstroms and an effective field-of-view of approximately 300 km(exp 2). The only gaseous absorption in the 2000 to 3000 Angstrom region was assumed to come from the Hartley band system of ozone, and therefore the amount of ozone was inferred by fitting this absorption feature with laboratory data of ozone absorption. Mars O3 as inferred from these spectra shows strong seasonal and latitudinal variation, with column abundances ranging from 0.2 microns at equatorial latitudes to 60 microns over the northern winter polar latitudes. The detectability limit of the spectrometer was approximately 3 microns. I use a radiative transfer model based on the discrete ordinate method to calculate synthetic radiance spectra. When typical amounts of dust and cloud are present, significant underestimation of O3 occurs. A factor of 3 times as much O3 is needed to generate the same spectrum for cloudy, dusty atmospheres as for a clear atmosphere. If the scattering properties of Martian clouds and dust were well known, then their appearance would not be a problem, as a model would be capable of retrieving the O3 abundance. However, these properties are not well known, which raises doubts about the effectiveness of the current UV spectroscopy technique used to measure O3. Spatial and temporal variability in temperature and water vapor have been claimed to account for the scatter of the data points. However, water vapor is a small source of odd hydrogen in the winter polar atmosphere, and may not account for most of the variability. Masking by clouds and dust may also account for some of the observed O3 variability, because the nature and opacity of the clouds and dust in the polar hood change dramatically in latitude and even on a day-to-day basis. As the maximum O3 abundance resides near the surface, spacecraft must be able to observe through the entire cloud and dust abundance in order to actually see the total O3 column abundance. If reflectance spectroscopy is used, as on Mariner 9, then the cloud and the airborne dust must be traversed twice; first by the incoming solar flux down to the surface, and then once again upon reflection from the surface out to the spacecraft.

Lindner, Bernhard Lee↗
NASA NTRS2020

Causes and Effects of AIRS Optics Temperature Cycles

In addition to the expected orbital thermal cycle, geophysical conditions with high thermal and reflected upwelling infrared (IR) drive measurable changes in the AIRS instrument with a period of 24 hours. Especially hot and bright scenes are important, with about 30% of the variability driven by thermal IR and 70% by reflected IR. We show how these cycles manifest in the instrument telemetry for temperatures and gain and with careful analysis can even be detected in spectral shifts.Thermal cycles are an unavoidable feature of instruments observing upwelling radiances from Earth, because the signal inherently carries varying amounts of energy into the instrument. Temperature control of the optical bench, on-board calibrator blackbody, and Focal Plane Array (FPA) in AIRS reduce the impacts of temperature variability to extremely small levels. This combined with good on-board telemetry of the temperatures and including temperature variability in our calibration algorithm has resulted in an instrument that achieves ‘climate quality’ measurements. Careful instrument and algorithm design allows us to characterize and document the impact of temperature variability and limit the effects to negligible levels, helping the instrument meet important climate-quality criteria specified in Ohring 2005

Overoye, Kenneth↗
NASA NTRS2015

Seasonal Variability of Saturn's Tropospheric Temperatures, Winds and Para-H2 from Cassini Far-IR Spectroscopy

Far-IR 16-1000 micrometer spectra of Saturn's hydrogen-helium continuum measured by Cassini's Composite Infrared Spectrometer (CIRS) are inverted to construct a near-continuous record of upper tropospheric (70-700 mbar) temperatures and para-H2 fraction as a function of latitude, pressure and time for a third of a saturnian year (2004-2014, from northern winter to northern spring). The thermal field reveals evidence of reversing summertime asymmetries superimposed onto the belt/zone structure. The temperature structure is almost symmetric about the equator by 2014, with seasonal lag times that increase with depth and are qualitatively consistent with radiative climate models. Localised heating of the tropospheric hazes (100-250 mbar) create a distinct perturbation to the temperature profile that shifts in magnitude and location, declining in the autumn hemisphere and growing in the spring. Changes in the para-H2 (f(sub p)) distribution are subtle, with a 0.02-0.03 rise over the spring hemisphere (200-500 mbar) perturbed by (i) low-f(sub p) air advected by both the springtime storm of 2010 and equatorial upwelling; and (ii) subsidence of high-f(sub p) air at northern high latitudes, responsible for a developing north-south asymmetry in f(sub p). Conversely, the shifting asymmetry in the para-H2 disequilibrium primarily reflects the changing temperature structure (and hence the equilibrium distribution of f(sub p)), rather than actual changes in f(sub p) induced by chemical conversion or transport. CIRS results interpolated to the same point in the seasonal cycle as re-analysed Voyager-1 observations (early northern spring) show qualitative consistency from year to year (i.e., the same tropospheric asymmetries in temperature and f(sub p)), with the exception of the tropical tropopause near the equatorial zones and belts, where downward propagation of a cool temperature anomaly associated with Saturn's stratospheric oscillation could potentially perturb tropopause temperatures, para-H2 and winds. Quantitative differences between the Cassini and Voyager epochs suggest that the oscillation is not in phase with the seasonal cycle at these tropospheric depths (i.e., it should be described as quasi-periodic rather than 'semi annual'). Variability in the zonal wind field derived from latitudinal thermal gradients is small (less than 10 m/s per scale height near the tropopause) and mostly affects the broad retrograde jets, with the notable exception of large variability on the northern flank of the equatorial jet. The meridional potential vorticity (PV) gradient, and hence the 'staircase of PV' associated with spatial variations in the vigour of vertical mixing, has varied over the course of the mission but maintained its overall shape. PV gradients in latitude and altitude are used to estimate the atmospheric refractive index for the propagation of stationary planetary (Rossby) waves, predicting that such wave activity would be confined to regions of real refractivity (tropical regions plus bands at 35-45 in both hemispheres). The penetration depth of these regions into the upper troposphere is temporally variable (potentially associated with stratification changes), whereas the latitudinal structure is largely unchanged over time (associated with the zonal jet system).

Fletcher, Leigh N.↗
NASA NTRS1977

JPL field measurements at the Finney County, Kansas, test site, October 1976: Meteorological variables, surface reflectivity, surface and subsurface temperatures

Data collected at the Finney County, Kansas test site as part of the Joint Soil Moisture Experiment (JSME) are presented here, prior to analysis, to provide all JSME investigators with an immediate source of primary information. The ground-truth measurements were taken to verify and complement soil moisture data taken by microwave and infrared sensors during aircraft overflights. Measurements were made of meteorological variables (air speed, temperature, relative humidity, and rainfall), surface reflectivity, and temperatures at and below the surface.

Kahle, A. B.↗
NASA NTRS2026

High Temperature Dielectric Properties and Differential Scanning Calorimetry of Lunar Simulants

To guide development of microwave process technology that could be used during in situ construction on the Moon, we measured the high-temperature basic dielectric properties (εʹ and εʺ) of 17 lunar simulants and related materials. In order to confidently use these data one needs to understand the data’s strengths and weaknesses. Therefore, a goal of this publication is to provide insights into the comparative effects of sample composition, pre-treatments, experimental variables, high temperatures, and other factors on the measured response. The dielectric measurements were performed using the cavity perturbation method over a temperature range between room temperature to 1000 °C, or higher, and provided the real and imaginary components of permittivity at six frequencies. The utility of the original values was limited by the varying density of the pellets used in the measurement. Therefore, all of the εʹ and εʺ measurements at the frequency of 2466 MHz have been scaled to a constant density, 1.75 g/cm 3 . Here the data are presented as graphs chosen to aid analysis within and across simulant groups. To gain additional insight into the processes happening at the elevated temperatures in the dielectric measurements, heat capacity data was obtained using differential scanning calorimetry (DSC) on several of the simulant materials. Our data show that over the frequency range 397 MHz – 2985 MHz a material’s behavior does not greatly change, as compared to the scale of differences observed between lunar mare and highland simulants at high temperatures. For example at 1000 °C, the mare simulant JSC-1A absorbs 10 times more power than the highland simulant NUW-LHT-5M. We observe that as melting temperatures are reached both permittivity and dielectric loss rise non-linearly, helping to explain thermal runaway during microware heating. Our data show that even less than a few weight % of many non-lunar minerals, and the use of mixtures in simulants can affect the dielectric behavior at higher temperatures. A comparison of our results with published dielectric data for Apollo samples and with remote sensing of the Moon supports the conclusion the simulants and lunar material at room temperature have very similar dielectric values.

Differential Scanning Calorimetry↗
NASA NTRS2012

Heat Stress Equation Development and Usage for Dryden Flight Research Center (DFRC)

Heat Stress Indices are equations that integrate some or all variables (e.g. temperature, relative humidity, wind speed), directly or indirectly, to produce a number for thermal stress on humans for a particular environment. There are a large number of equations that have been developed which range from simple equations that may ignore basic factors (e.g. wind effects on thermal loading, fixed contribution from solar heating) to complex equations that attempt to incorporate all variables. Each equation is evaluated for a particular use, as well as considering the ease of use and reliability of the results. The meteorology group at the Dryden Flight Research Center has utilized and enhanced the American College of Sports Medicine equation to represent the specific environment of the Mojave Desert. The Dryden WBGT Heat Stress equation has been vetted and implemented as an automated notification to the entire facility for the safety of all personnel and visitors.

Houtas, Franzeska↗
NASA NTRS1991

The connection between coronal bright points and the variability of the quiet-sun extreme-ultraviolet emission

An analysis of the EUV/Skylab data recorded at six wavelengths simultaneously and scanning the chromosphere to the corona is reported. The results show that, whether in a coronal hole or a quiet region, the significant variable emission in the quiet sun is preferentially localized in the enhanced emission produced by EUV bright points in the boundaries of network cells. The spatial density of the variable and enhanced emission varies with temperature, with a minimum at 3 x 10 exp 5 K which indicates two favored temperature distributions of small-scale loops in the quiet sun, one below 3 x 10 exp 5 K and one at coronal temperatures. The enhanced emission occupies between 10 and 25 percent of the solar surface, depending on the temperature, while the variable emission covers between 5 and 15 percent. For a given region, the spatial density at a given temperature does not vary in time by more than 10 percent about its mean value.

Habbal, Shadia R.↗
NASA NTRS1993

An evaluation of high-resolution interferometer soundings and their use in mesoscale analyses

An examination is made of temperature and dewpoint soundings obtained by an airborne prototype of the High-resolution Interferometer Sounder (HIS) on two flight days, to ascertain their error characteristics and their utility in mesoscale analyses. Crude estimates of Bowen ratio were obtained from HIS data using a mixing-line approach; the HIS retrievals indicated that areas of thunderstorm formation were the regions of greatest instability. HIS soundings were also able to detect some of the landscape variability and temperature and humidity fluctuations present.

Bradshaw, John T.↗