Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transverse modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Evanescent Mode Photoemission

Photoemission of electrons from solid surfaces into vacuum is routinely used in two configurations: reflection mode, in which light is incident on the emitting surface, and transmission mode, in which light illuminates the photoemissive material from behind. Here, using silicon nitride waveguides integrated beneath a high quantum efficiency cesium antimonide thin film, we demonstrate a new photoemission regime─the evanescent mode photoemission─in which light travels parallel to the surface in the waveguide while evanescently coupling into the thin film to excite and emit photoelectrons. Furthermore, our experiments show that this configuration enables direct visualization of guided optical modes over an unprecedented range (∼100 nm to 1 mm) and allows electron beam shaping at the source with transverse features well below ∼600 nm, establishing evanescent mode photoemission as a new platform for nanoscale optical field mapping and precise generation of electron beams.

Electron Sources↗
NASA NTRS1972

Finite-amplitude pressure waves in the radial mode of a cylinder

A numerical study of finite-strength, isentropic pressure waves transverse to the axis of a circular cylinder was made for the radial resonant mode. The waves occur in a gas otherwise at rest, filling the cylinder. A method of characteristics was used for the numerical solution. For small but finite amplitudes, calculations indicate the existence of waves of permanent potential form. For larger amplitudes, a shock is indicated to occur. The critical value of the initial amplitude parameter in the power series is found to be 0.06 to 0.08, under various types of initial conditions.

Kubo, I.↗
NASA NTRS1989

Effect of adhesive interleaving and discontinuous plies on failure of composite laminates subject to transverse normal loads

Results of a series of tests to determine the effects of adhesive interleaving and discontinuous plies (plies with end-to-end gaps) on the displacements, failure loads and failure modes of graphite-epoxy laminates subjected to transverse normal loads are presented. Adhesive interleaving can be used to contain local damage within a group of plies, i.e., to arrest crack propagation on the interlaminate level, and it can increase the amount of normal displacement the laminate can withstand before failure. However, the addition of adhesive interleaving to a laminate does not significantly increase its load carrying capability. A few discontinuous plies in a laminate can reduce the normal displacement and load at failure by 10 to 40 percent compared to a laminate with no discontinuous plies, but the presence of the ply discontinuities does not generally change the failure location or the failure mode of the laminate.

Jegley, Dawn C.↗
NASA NTRS1994

Modes in light wave propagating in semiconductor laser

The study of semiconductor laser based on an analogy of the Schrodinger equation and an equation describing light wave propagation in nonhomogeneous medium is developed. The active region of semiconductor laser is considered as optical waveguide confining the electromagnetic field in the cross-section (x,y) and allowing waveguide propagation along the laser resonator (z). The mode structure is investigated taking into account the transversal and what is the important part of the suggested consideration longitudinal nonhomogeneity of the optical waveguide. It is shown that the Gaussian modes in the case correspond to spatial squeezing and correlation. Spatially squeezed two-mode structure of nonhomogeneous optical waveguide is given explicitly. Distribution of light among the laser discrete modes is presented. Properties of the spatially squeezed two-mode field are described. The analog of Franck-Condon principle for finding the maxima of the distribution function and the analog of Ramsauer effect for control of spatial distribution of laser emission are discussed.

Manko, Margarita A.↗
NASA NTRS2008

24-Way Radial Power Combiner/Divider for 31 to 36 GHz

The figure shows a prototype radial power-combining waveguide structure, capable of operation at frequencies from 31 to 36 GHz, that features an unusually large number (N = 24) of combining (input) ports. The combination of wide-band operation and large N is achieved by incorporating several enhancements over a basic radial power-combiner design. In addition, the structure can be operated as a power divider by reversing the roles of the input and output ports. In this structure, full-height waveguides at the combining ports are matched in impedance to reduced-height radial waveguides inside the combiner base. This match is effected by impedance-transforming stepped waveguide sections. This matching scheme is essential to achievement of large N because N is limited by the height of the waveguides in the base. Power is coupled from the 24 reduced- height radial waveguides into the TE01 mode of a circular waveguide in the base with the help of a matching post at the bottom of the base. ( TE signifies transverse electric, the first subscript is the azimuthal mode number, and the second subscript is the radial mode number.) More specifically, the matching post matches the reflections from the walls of the 24 reduced-height waveguides and enables the base design to exceed the bandwidth requirement. After propagating along the circular waveguide, the combined power is coupled, via a mode transducer, to a rectangular waveguide output port. The mode transducer is divided into three sections, each sized and shaped as part of an overall design to satisfy the mode-conversion and output-coupling requirements while enabling the circular waveguide to be wide enough for combining the 24 inputs over the frequency range of 31 to 36 GHz. During the design process, it was found that two different rectangular waveguide outputs could be accommodated through modification of only the first section of the mode converter, thereby enabling operation in multiple frequency ranges.

Epp, Larry↗
NASA NTRS1972

Fluctuating magnetic fields in the magnetosphere. II - ULF waves.

At the present time the existing satellite observations of ULF waves suggest that the level of geomagnetic activity controls the types of waves which occur within the magnetosphere. Consequently, we consider separately quiet times, times of magnetospheric substorms, and times of magnetic storms. Within each of these categories, there are distinctly different wave modes distinguished by their polarization: either transverse or parallel to the ambient field. In addition, these wave phenomena occur in distinct frequency bands. In terms of the standard nomenclature of ground micropulsation studies ULF wave types observed in the magnetosphere include quiet time transverse - Pc 1, Pc 3, Pc 4, Pc 5; quiet time compressional - Pc 1 and Pi 1; substorm compressional Pi 1 and Pi 2; storm transverse - Pc 1; storm compressional Pc 4, 5.

Mcpherron, R. L.↗
NASA NTRS1979

The effect of transverse shear in a cracked plate under skew-symmetric loading

The problem of an elastic plate containing a through crack and subjected to twisting moments or transverse shear loads is considered. By using a bending theory which allows the satisfaction of the boundary conditions on the crack surface regarding the normal and the twisting moments and the transverse shear load separately, it is found that the resulting asymptotic stress field around the crack tip becomes identical to that given by the elasticity solutions of the plane strain and antiplane shear problems. The problem is solved for uniformly distributed or concentrated twisting moment or transverse shear load and the normalized Mode II and Mode III stress-intensity factors are tabulated. The results also include the effect of the Poisson's ratio and material orthotropy for specially orthotropic materials on the stress-intensity factors.

Delale, F.↗
NASA NTRS1988

The effect of elastic boundary conditions on the dynamic response of rectangular plates

Natural frequencies and forced steady-state harmonic response for the vibration of uniform rectangular plates with edges elastically restrained against rotation and transverse translation are addressed. A single mode Rayleigh-Ritz solution is derived using functions that describe the normal modes of vibration of a beam whose ends are elastically restrained. The finite element solution is obtained for comparison. MACSYMA symbolic manipulation system is implemented as an aid to the mathematical rigor of the Ritz approach, and NASTRAN finite element code is used to model the mechanical system. Comparisons are made to published results and the solutions of this study are found to give lower frequencies for some values of boundary restraint. Steady-state harmonic amplitudes of displacement and acceleration are found to agree favorably for the two solutions. Low predictions of steady-state strain from NASTRAN result in some cases when compared to the Ritz values. Finally, a subjective assessment is made about the merit of using MACSYMA and NASTRAN.

Brewer, Terry K.↗
NASA NTRS2007

Dynamic Snap-Through of Thermally Buckled Structures by a Reduced Order Method

The goal of this investigation is to further develop nonlinear modal numerical simulation methods for application to geometrically nonlinear response of structures exposed to combined high intensity random pressure fluctuations and thermal loadings. The study is conducted on a flat aluminum beam, which permits a comparison of results obtained by a reduced-order analysis with those obtained from a numerically intensive simulation in physical degrees-of-freedom. A uniformly distributed thermal loading is first applied to investigate the dynamic instability associated with thermal buckling. A uniformly distributed random loading is added to investigate the combined thermal-acoustic response. In the latter case, three types of response characteristics are considered, namely: (i) small amplitude vibration around one of the two stable buckling equilibrium positions, (ii) intermittent snap-through response between the two equilibrium positions, and (iii) persistent snap-through response between the two equilibrium positions. For the reduced-order analysis, four categories of modal basis functions are identified including those having symmetric transverse, anti-symmetric transverse, symmetric in-plane, and anti-symmetric in-plane displacements. The effect of basis selection on the quality of results is investigated for the dynamic thermal buckling and combined thermal-acoustic response. It is found that despite symmetric geometry, loading, and boundary conditions, the anti-symmetric transverse and symmetric in-plane modes must be included in the basis as they participate in the snap-through behavior.

Przekop, Adam↗
NASA NTRS2014

Structural Characterization of Lateral-grown 6H-SiC am-plane Seed Crystals by Hot Wall CVD Epitaxy

The performance of commercially available silicon carbide (SiC) power devices is limited due to inherently high density of screw dislocations (SD), which are necessary for maintaining polytype during boule growth and commercially viable growth rates. The NASA Glenn Research Center (GRC) has recently proposed a new bulk growth process based on axial fiber growth (parallel to the c-axis) followed by lateral expansion (perpendicular to the c-axis) for producing multi-faceted m-plane SiC boules that can potentially produce wafers with as few as one SD per wafer. In order to implement this novel growth technique, the lateral homoepitaxial growth expansion of a SiC fiber without introducing a significant number of additional defects is critical. Lateral expansion is being investigated by hot wall chemical vapor deposition (HWCVD) growth of 6H-SiC am-plane seed crystals (0.8mm x 0.5mm x 15mm) designed to replicate axially grown SiC single crystal fibers. The post-growth crystals exhibit hexagonal morphology with approximately 1500 m (1.5 mm) of total lateral expansion. Preliminary analysis by synchrotron white beam x-ray topography (SWBXT) confirms that the growth was homoepitaxial, matching the polytype of the respective underlying region of the seed crystal. Axial and transverse sections from the as grown crystal samples were characterized in detail by a combination of SWBXT, transmission electron microscopy (TEM) and Raman spectroscopy to map defect types and distribution. X-ray diffraction analysis indicates the seed crystal contained stacking disorders and this appears to have been reproduced in the lateral growth sections. Analysis of the relative intensity for folded transverse acoustic (FTA) and optical (FTO) modes on the Raman spectra indicate the existence of stacking faults. Further, the density of stacking faults is higher in the seed than in the grown crystal. Bundles of dislocations are observed propagating from the seed in m-axis lateral directions. Contrast extinction analysis of these dislocation lines reveals they are edge type basal plane dislocations that track the growth direction. Polytype phase transition and stacking faults were observed by high-resolution TEM (HRTEM), in agreement with SWBXT and Raman scattering.

Single Crystal↗
NASA NTRS1975

Transversely bounded DFB lasers

Bounded distributed-feedback (DFB) lasers are studied in detail. Threshold gain and field distribution for a number of configurations are derived and analyzed. More specifically, the thin-film guide, fiber, diffusion guide, and hollow channel with inhomogeneous-cladding DFB lasers are considered. Optimum points exist and must be used in DFB laser design. Different-modes feedback and the effects of the transverse boundaries are included. A number of applications are also discussed.

Elachi, C.↗
DOE OSTI2022

Theory of magnon polaritons in quantum Ising materials

Here, we present a theory of magnon-polaritons in quantum Ising materials, and develop a formalism describing the coupling between light and matter as an Ising system is tuned through its quantum critical point. The theory is applied to Ising materials having multilevel single-site Hamiltonians, in which multiple magnon modes are present, such as the insulating Ising magnet LiHoF 4 . We find that the magnon-photon coupling strengths may be tuned by the applied transverse field, with the coupling between the soft mode present in the quantum Ising material and a photonic resonator mode diverging at the quantum critical point of the material. A fixed system of spins will not exhibit the diamagnetic response expected when light is coupled to mobile spins or atoms. Without the diamagnetic response, one expects a divergent magnon-photon coupling strength to lead to a superradiant quantum phase transition. However, this neglects the effects of damping and decoherence present in any real system. We show that damping and decoherence may block the superradiant quantum phase transition, and lead to weak coupling between the soft magnon mode and the resonator mode. The results of the theory are applied to experimental data on the model system LiHoF 4 in a microwave resonator.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRSDate not supplied

An Automated Meshing Framework for Progressive Damage Analysis of Fabrics Using CompDam

A meshing and model construction framework for progressive damage analysis of fabric composites is proposed. A mesoscale idealization is used such that the fiber tows are considered homogeneous and transversely isotropic continua, and the matrix is a homogeneous isotropic continuum. By using this idealization, relatively mature damage modeling techniques developed for laminates of unidirectional plies are transferrable to fabrics. Cohesive interface elements and a continuum damage mechanics (CDM) model implemented in the software CompDam are used to account for the key damage modes including cracking at the tow/matrix interface, transverse matrix cracking in the tows, and fiber breakage in the tows. Matrix degradation is accounted for by plasticity. The modeling approach is demonstrated for a 3D orthogonal woven fabric. The main novelty of the proposed model construction framework is in its flexibility resulting from a formulation that is agnostic to the fabric architecture and implementation using mesh based operations. The algorithm does not make any assumptions about the tow sizes, shape, path, or proximity to other tows, thus it is applicable to a broad range of fabric architectures. The matrix region mesh surrounding the tows is constructed from domain boundary and tow surface meshes (i.e. through a series of mesh-based operations) such that the model domain can be arbitrarily shaped.

Andrew Cole Bergan↗
NASA NTRS1976

Fatigue of notched fiber composite laminates. Part 2: Analytical and experimental evaluation

The analytical/experimental correlation study was performed to develop an understanding of the behavior of notched Boron/epoxy laminates subjected to tension/tension fatigue loading. It is postulated that the fatigue induced property changes (stiffness as well as strength) of the laminate can be obtained from the lamina fatigue properties. To that end, the Boron/epoxy lamina static and fatigue data (lifetime, residual stiffness and strength) were obtained initially. The longitudinal and transverse tension data were determined from the (0) and (90) laminate tests while the in-plane shear data were obtained from the (+ or - 45) sub s laminates. The static tests obtained the notched strength and mode of failure while the fatigue tests determined lifetime, damage propagation and residual strength. The failure in static tension occurred in a transverse crack propagation mode.

Kulkarni, S. V.↗
DOE OSTI2026

Uncertainty quantification for competing failure mechanisms in unidirectionally reinforced carbon–carbon composites

Microstructure-informed finite element models play a key role in the carbon–carbon composite design process. Variability in manufacturing process parameters and experimental limitations introduce model parameter uncertainty. This study quantifies the effect of model parameter uncertainty on transverse tensile fracture behavior and proposes a methodology to predict the failure mode based on competing microscale damage mechanisms. Finite element simulations incorporate fiber–matrix interface debonding with cohesive zones and matrix damage with a smeared crack band approach in a unidirectional carbon–carbon composite. Results from a variance-based global sensitivity analysis identifies interfacial and matrix damage parameters as the primary source of variability in fracture behavior. Sobol’ indices indicate that matrix and cohesive zone strengths contribute 94% of the variance in the effective ultimate stress. A local analysis elucidates the relationship between these constituent strength parameters and failure mode by estimating the probability of cohesive, matrix, and mixed-mode dominated failure. Based on the results for 4000 simulations, 93% exhibit mixed-mode or interfacial dominated failure, which underscores the crucial role of fiber–matrix interface debonding in the transverse tensile failure of carbon–carbon composites. These uncertainty quantification results facilitate more efficient model calibration and provide a framework for microstructure-informed failure predictions in the face of manufacturing-induced uncertainty.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Effects of solar wind composition, anisotropy, and streaming on ordinary mode electromagnetic instability

The stability of the low-frequency waves propagating transverse to the magnetic field of a plasma composed of electrons, protons, and alpha particles with anisotropic electron and ion temperatures is explored. The threshold for the ordinary mode instability and the growth rates have a very strong dependence on the electron temperature anisotropy but have a comparatively weaker dependence on the ion temperature anisotropy, on the relative abundance of helium to hydrogen, and on the relative streaming of two ion species. The threshold for the instability of these low-frequency waves is (m sub e/m sub p) to the 1/2 power times smaller than the one corresponding to high-frequency waves; however, for a relative abundance of helium to hydrogen up to 20% for the relevant known magnetic fields, particle densities, temperatures, and drifts, the solar wind remains below the threshold for this instability.

Buti, B.↗
DOE OSTI2020

Production of $π^0$ and $\eta$ mesons in $\mathrm{U+U}$ collisions at $\sqrt {s_{NN}} = 192$ $\mathrm {GeV}$

The PHENIX experiment at the Relativistic Heavy Ion Collider measured $π^0$ and $\eta$ mesons at midrapidity in $\mathrm{U+U}$ collisions at $\sqrt {s_{NN}} = 192$ $\mathrm {GeV}$ in a wide transverse momentum range. Measurements were performed in the $π^0(η) → γγ$ decay modes. A strong suppression of $π^0$ and $\eta$ meson production at high transverse momentum was observed in central $\mathrm{U+U}$ collisions relative to binary scaled p + p results. Yields of $π^0$ and $\eta$ mesons measured in $\mathrm{U+U}$ collisions show similar suppression pattern to those measured in Au + Au collisions at $\sqrt {s_{NN}} = 200$ $\mathrm {GeV}$ for similar numbers of participant nucleons. The $η/π^0$ ratios do not show dependence on centrality or transverse momentum and are consistent with previously measured values in hadron-hadron, hadron-nucleus, nucleus-nucleus, and $e^+e^-$ collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗