Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trigger”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Energy deposition in hard dihadron triggered events in heavy-ion collisions

The experimental observation of hadrons correlated back-to-back with a (semi-)hard trigger in heavy-ion collisions has revealed a splitting of the away side correlation structure in a low to intermediate transverse momentum (P{sub T}) regime. This is consistent with the assumption that energy deposited by the away side parton into the bulk medium produced in the collision excites a sonic shock wave (a Mach cone) that leads to away side correlation strength at large angles. A prediction that follows from assuming such a hydrodynamical origin of the correlation structure is that there is a sizable elongation of the shock wave in rapidity due to the longitudinal expansion of the bulk medium. Using a single-hadron trigger, this cannot be observed because of the unconstrained rapidity of the away side parton. Using a dihadron trigger, the rapidity of the away side parton can be substantially constrained and the longitudinal structure of the away side correlation becomes accessible. However, in such events several effects occur that change the correlation structure substantially: There is not only a sizable contribution due to the fragmentation of the emerging away side parton but also a systematic bias toward small energy deposition into the medium and hence a weak shock wave. In this article, both effects are addressed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Radiation Tolerant Electronics and Digital Processing for the Phase-I Trigger Readout Upgrade of the ATLAS Liquid Argon Calorimeters

The high luminosities of L > 10{sup 34} cm{sup -2}s{sup -1} at the Large Hadron Collider (LHC) at CERN produce an intense radiation environment that the detectors and their electronics must withstand. The ATLAS detector is a multi-purpose apparatus constructed to explore the new particle physics regime opened by the LHC. Of the many decay particles observed by the ATLAS detector, the energy of the created electrons and photons is measured by a sampling calorimeter technique that uses Liquid Argon (LAr) as its active medium. The front end (FE) electronic readout of the ATLAS LAr calorimeter located on the detector itself consists of a combined analog and digital processing system. In order to exploit the higher luminosity while keeping the same trigger bandwidth of 100 kHz, higher transverse granularity, higher resolution and longitudinal shower shape information will be provided from the LAr calorimeter to the Level-l trigger processors. New trigger readout electronics have been designed for this purpose, which will withstand the radiation dose levels expected for an integrated luminosity of 3000 fb{sup -1} during the high luminosity LHC (HL-LHC), which is well above the original LHC design qualifications. (authors)

43 PARTICLE ACCELERATORS↗

Magnetic resonance visualization of conductive structures by sequence-triggered direct currents and spin-echo phase imaging

Purpose: Instrument visualization in interventional magnetic resonance imaging (MRI) is commonly performed via susceptibility artifacts. Unfortunately, this approach suffers from limited conspicuity in inhomogeneous tissue and disturbed spatial encoding. Also, susceptibility artifacts are controllable only by sequence parameters. This work presents the basics of a new visualization method overcoming such problems by applying sequence-triggered direct current (DC) pulses in spin-echo (SE) imaging. SE phase images allow for background free current path localization. Methods: Application of a sequence-triggered DC pulse in SE imaging, e.g., during a time period between radiofrequency excitation and refocusing, results in transient field inhomogeneities. Dependent on the additional z-magnetic field from the DC, a phase offset results despite the refocusing pulse. False spatial encoding is avoided by DC application during periods when read-out or slice-encoding gradients are inactive. A water phantom containing a brass conductor (water equivalent susceptibility) and a titanium needle (serving as susceptibility source) was used to demonstrate the feasibility. Artifact dependence on current strength and orientation was examined. Results: Without DC, the brass conductor was only visible due to its water displacement. The titanium needle showed typical susceptibility artifacts. Applying triggered DC pulses, the phase offset of spins near the conductor appeared. Because SE phase images are homogenous also in regions of persistent field inhomogeneities, the position of the conductor could be determined with high reliability. Artifact characteristic could be easily controlled by amperage leaving sequence parameters unchanged. For an angle of 30° between current and static field visualization was still possible. Conclusions: SE phase images display the position of a conductor carrying pulsed DC free from artifacts caused by persistent field inhomogeneities. Magnitude and phase images are acquired simultaneously under the same conditions without the use of extra measurement time. The presented technique offers many advantages for precise instrument localization in interventional MRI.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Improved quality of intrafraction kilovoltage images by triggered readout of unexposed frames

Purpose: The gantry-mounted kilovoltage (kV) imager of modern linear accelerators can be used for real-time tumor localization during radiation treatment delivery. However, the kV image quality often suffers from cross-scatter from the megavoltage (MV) treatment beam. This study investigates readout of unexposed kV frames as a means to improve the kV image quality in a series of experiments and a theoretical model of the observed image quality improvements. Methods: A series of fluoroscopic images were acquired of a solid water phantom with an embedded gold marker and an air cavity with and without simultaneous radiation of the phantom with a 6 MV beam delivered perpendicular to the kV beam with 300 and 600 monitor units per minute (MU/min). An in-house built device triggered readout of zero, one, or multiple unexposed frames between the kV exposures. The unexposed frames contained part of the MV scatter, consequently reducing the amount of MV scatter accumulated in the exposed frames. The image quality with and without unexposed frame readout was quantified as the contrast-to-noise ratio (CNR) of the gold marker and air cavity for a range of imaging frequencies from 1 to 15 Hz. To gain more insight into the observed CNR changes, the image lag of the kV imager was measured and used as input in a simple model that describes the CNR with unexposed frame readout in terms of the contrast, kV noise, and MV noise measured without readout of unexposed frames. Results: Without readout of unexposed kV frames, the quality of intratreatment kV images decreased dramatically with reduced kV frequencies due to MV scatter. The gold marker was only visible for imaging frequencies ≥3 Hz at 300 MU/min and ≥5 Hz for 600 MU/min. Visibility of the air cavity required even higher imaging frequencies. Readout of multiple unexposed frames ensured visibility of both structures at all imaging frequencies and a CNR that was independent of the kV frame rate. The image lag was 12.2%, 2.2%, and 0.9% in the first, second, and third frame after an exposure. The CNR model predicted the CNR with triggered image readout with a mean absolute error of 2.0% for the gold marker. Conclusions: A device that triggers readout of unexposed frames during kV fluoroscopy was built and shown to greatly improve the quality of intratreatment kV images. A simple theoretical model successfully described the CNR improvements with the device.

60 APPLIED LIFE SCIENCES↗

Triggering the {sup 178m2}Hf isomer via resonance conversion

Experiments on photoinduced deexcitation of {sup 178m2}Hf are reanalyzed. A mechanismof triggering the 12.7-keV E3 transition, based on resonance conversion, is considered. That rises the efficiency by an order of magnitude. The main obstacle for enhancing the efficiency is a high internal conversion rate. For this reason, isomers with low multipole order (E1, M1) with high enough energy of the triggering transition are more suitable for triggering. Another way is offered by partial ionization of the outer electrons for decreasing the conversion rate. The results are applied to experiments in laser-produced plasma.

74 ATOMIC AND MOLECULAR PHYSICS↗

Muon and B-physics trigger of the ATLAS experiment in Run 2

This paper presents an overview of muon trigger and B-physics trigger of the ATLAS experiment. Main updates done during the preparation for Run 2 data-taking are outlined. Trigger performance results obtained with new experimental data and modelling are shown.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for low-mass dijet resonances using trigger-level jets with the ATLAS detector in p p collisions at sqrt(s)=13 TeV

Searches for dijet resonances with sub-TeV masses using the ATLAS detector at the Large Hadron Collider can be statistically limited by the bandwidth available to inclusive single-jet triggers, whose data-collection rates at low transverse momentum are much lower than the rate from Standard Model multijet production. This data refers to a search for dijet resonances using a strategy called "Trigger-object Level Analysis" (TLA) in ATLAS, where the limitation on high-rate events that can be used for the search is overcome by recording only the event information calculated by the jet trigger algorithms, thereby allowing much higher event rates with reduced storage needs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Machine Learning for DUNE Supernova Trigger

One of the major scientific goals of the Deep Underground Neutrino Experiment (DUNE) is to detect and measure the neutrino flux from galactic core-collapse supernovae. These neutrinos, which exist in the low energy range of up to a few tens of MeV and are responsible for carrying away over 99% of the gravitational binding energy of the supernova, provide an opportunity to study the end of life evolution of massive stars, as well as unique properties and interactions of neutrinos. Because galactic supernovae are expected to occur only on the timespan of every few decades, it is crucial that DUNE is able to detect supernova neutrino interactions when they occur. However, detecting these supernova interactions requires sifting through a large amount of data, and DUNE detectors require a trigger to signal when supernova neutrino events occur. Machine learning provides a potential approach to creating this trigger. This project generates ADC and ground truth images of neutrino interactions in a LArTPC detector as simulated by the Model of Argon Reaction Low Energy Yields (MARLEY) to be used for machine learning. The eventual goal of this work is to facilitate DUNE s detection of supernova neutrino interactions by building a machine learning pipeline that will train the trigger algorithm.

Damish, Stephanie↗

Assessing Edge Localized Mode (ELM) Mitigation by Pellet Triggering in Smallest-Possible Affordable Robust Compact (SPARC) Low-Collisionality Discharges

Simulations of pellet edge-localized mode (ELM) triggering with the M3D-C1 code confirmed experimentally observed pellet mass thresholds in low-collisionality DIII-D discharges and predicted extremely large thresholds in ITER [A. Wingen et al, Nucl. Fusion 64, 066015(2024)]. The linear (static) and nonlinear (dynamic) workflows developed in this previous work are now applied to the SPARC tokamak. Multiple synthetic equilibria for the high-performance H-mode scenario are tested for MHD stability without pellets using the linear workflow and ELITE simulations; a stable one is identified. Pellets of various mass are injected along an inboard, near-midplane trajectory in the M3D-C1 simulation. No pellet mass threshold for ELM triggering can be found for realistic pellet masses, concluding that fueling from this injection location would not trigger ELMs. A poloidal scan of possible injection locations shows very high thresholds on the high-field side and reasonable thresholds on the low-field-side (LFS). Based on results of this work the location for a LFS injection was finalized in the SPARC design. For this LFS injection the pellet mass threshold is determined using the linear workflow, aligning well with the poloidal scan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study and improvement of the trigger system in ICARUS

In recent years, intriguing experimental neutrino anomalies have emerged. If confirmed, they could hint at the presence of additional sterile neutrino states playing in neutrino mixing. The Short-Baseline Neutrino project at Fermilab aims to delve into these anomalies, utilizing three Liquid Argon Time Projection Chamber detectors along the Booster Neutrino Beam. The SBND detector serves as nearby instruments, while MicroBooNE and ICARUS function as far detectors and also explore the NuMI beam off-axis. A relevant aspect in the functioning of all SBN detectors is the trigger system, that determines which interactions are recorded. In particular, in ICARUS, it relies on the synchronization of prompt signals from scintillation light within the LAr-TPC, detected by a system of Photo-Multiplier Tubes, with the proton beam’s spill extraction. The existing majority-based logic of the trigger system could potentially be enhanced through adder boards that sum analog signals from PMTs in groups of 15. This sum-based triggering might aid in identifying events near TPC walls, where light is abundant but captured by only a few PMTs, potentially bypassing the majority condition. Comprehensive tests have been performed to characterize these adder boards.

43 PARTICLE ACCELERATORS↗

Impact of a track trigger at a multi-TeV muon collider

In the panorama of future particle accelerators, the Muon Collider seems to be the best choice for several reasons that will be explored in section 1.2. The main challenge is represented by the instability of the muons. At the desired instantaneous luminosities, an intense flow of secondary and tertiary particles from the interactions of the beam decay products with the machine elements reaches the detector, compromising its performance. Several studies are currently underway to mitigate the background and to have an efficient trigger. My work represents a first step towards understanding the basic characteristics of a trigger selection, which will subsequently guide the design of the trigger system. With this aim I produced and analyzed Higgs and di-Higgs signals with MadGraph and CERN-ROOT. In first section there is an introduction to Muon Collider, a brief history, a discussion of its benefits, a description of the detector and of the effects of the Beam Induced Background. Several operating center-of-mass energies are possible for this machine, in this report a center-of-mass of 3 TeV is assumed. Then I describe the event generation process. Finally I describe the entire analysis, in particular I analyzed the efficiency and the number of events for each process.

43 PARTICLE ACCELERATORS↗

Assessing Edge Localized Mode (ELM) Mitigation by Pellet Triggering in Smallest-Possible Affordable Robust Compact (SPARC) Low-Collisionality Discharges

Simulations of pellet edge-localized mode (ELM) triggering with the M3D-C1 code confirmed experimentally observed pellet mass thresholds in low-collisionality DIII-D discharges and predicted extremely large thresholds in ITER. The linear (static) and nonlinear (dynamic) workflows developed in this previous work are now applied to the SPARC tokamak. Multiple synthetic equilibria for the high-performance H-mode scenario are tested for MHD stability without pellets using the linear workflow and ELITE simulations; a stable one is identified. Pellets of various mass are injected along an inboard, near-midplane trajectory in the M3D-C1 simulation. No pellet mass threshold for ELM triggering can be found for realistic pellet masses, concluding that fueling from this injection location would not trigger ELMs. A poloidal scan of possible injection locations shows very high thresholds on the high-field side and reasonable thresholds on the low-field-side (LFS). Based on results of this work the location for a LFS injection was finalized in the SPARC design. For this LFS injection the pellet mass threshold is determined using the linear workflow, aligning well with the poloidal scan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Towards Anomaly Detection at the CMS High-Level Trigger System

Traditional trigger strategies in CMS typically rely on model-dependent selections or rigid kinematic cuts, risking the omission of unexpected exotic signatures. To address this, we propose a novel anomaly detection (AD) algorithm for the High-Level Trigger (HLT), designed to serve as a complementary second layer of filtering to the Level-1 AXOL1TL AD algorithm. We employ a transformer-based foundation model trained on a diverse ensemble of Standard Model processes. By combining a joint contrastive and classification objective, and using particle kinematics as inputs, the model learns to map events to a physics-informed latent space where anomalous events are isolated from dominant backgrounds. Preliminary results show that this strategy enhances the signal-to-background ratio across a range of rare SM and BSM scenarios. Furthermore, this work constitutes foundational R&D for the potential implementation of an analogous AD algorithm in the Level-1 trigger system for Phase-2.

Cruz, Roy [U. Wisconsin, Madison (main)] (ORCID:00↗

Study of the Design and Characteristics of a Modified Pulsed Plasma Thruster with Graphite and Tungsten Trigger Electrodes

The paper presents experimental results for a modified pulsed plasma thruster (PPT) with solid propellant, using a coaxial anode–cathode design. Graphite from pencil leads served as propellant, and a tungsten trigger electrode was tested to reduce carbonization effects. Experiments were performed in a vacuum chamber at 0.001 Pa, employing diagnostics such as discharge current/voltage recording, power measurement, ballistic pendulum, time-of-flight (TOF) method, and a Faraday cup. Current and voltage waveforms matched an oscillatory RLC circuit with variable plasma channel resistance. Key discharge parameters were measured, including current pulse duration/amplitude and plasma channel formation/decay dynamics. Impulse bit values, obtained with a ballistic pendulum, reached up to 8.5 μN·s. Increasing trigger capacitor capacitance reduced thrust due to unstable “pre-plasma” formation and partial pre-discharge energy loss. Using TOF and Faraday cup diagnostics, plasma front velocity, ion current amplitude, current density, and ion concentration were determined. Tungsten electrodes produced lower charged particle concentrations than graphite but offered better adhesion resistance, minimal carbonization, and stable long-term performance. The findings support optimizing trigger electrode materials and PPT operating modes to extend lifetime and stabilize thrust output.

Faraday cup↗

CO OBSERVATIONS AND INVESTIGATION OF TRIGGERED STAR FORMATION TOWARD THE N10 INFRARED BUBBLE AND SURROUNDINGS

We studied the environment of the dust bubble N10 in molecular emission. Infrared bubbles, first detected by the GLIMPSE survey at 8.0 μ m, are ideal regions to investigate the effect of the expansion of the H ii region on its surroundings and the eventual triggering of star formation at its borders. In this work, we present a multi-wavelength study of N10. This bubble is especially interesting because infrared studies of the young stellar content suggest a scenario of ongoing star formation, possibly triggered on the edge of the H ii region. We carried out observations of {sup 12}CO(1-0) and {sup 13}CO(1-0) emission at PMO 13.7 m toward N10. We also analyzed the IR and sub-millimeter emission on this region and compare those different tracers to obtain a detailed view of the interaction between the expanding H ii region and the molecular gas. We also estimated the parameters of the denser cold dust condensation and the ionized gas inside the shell. Bright CO emission was detected and two molecular clumps were identified from which we have derived physical parameters. We also estimate the parameters for the densest cold dust condensation and for the ionized gas inside the shell. The comparison between the dynamical age of this region and the fragmentation timescale favors the “Radiation-Driven Implosion” mechanism of star formation. N10 is a case of particular interest with gas structures in a narrow frontier between the H ii region and surrounding molecular material, and with a range of ages of YSOs situated in the region, indicating triggered star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Primordial Black Hole Triggered Type Ia Supernovae. I. Impact on Explosion Dynamics and Light Curves

Primordial black holes (PBHs) in the asteroid-mass window are compelling dark matter candidates, made plausible by the existence of black holes and by the variety of mechanisms of their production in the early Universe. If a PBH falls into a white dwarf (WD), the strong tidal forces can generate enough heat to trigger a thermonuclear runaway explosion, depending on the WD’s mass and the PBH’s orbital parameters. In this work, we investigate the WD explosion triggered by the passage of a PBH. We perform 2D simulations of the WD undergoing thermonuclear explosion in this scenario, with the predicted ignition site as a parameter assuming the deflagration–detonation transition model. We study the explosion dynamics, and predict the associated light curves and nucleosynthesis. We find that the model sequence predicts light curves which align with the Phillips relation (B max versus ΔM 15 ). Our models hint at a unifying approach in triggering Type Ia supernovae without involving two distinctive evolutionary tracks.

Dark matter↗

Comparative study of hadron- and γ-triggered azimuthal correlations in relativistic heavy-ion collisions

In the framework of a multi-phase transport model, initial fluctuations in the transverse parton density lead to all orders of harmonic flows. Hadron-triggered azimuthal correlations include all contributions from harmonic flows, hot spots, and jet-medium excitations, which are isolated by using different initial conditions. We found that different physical components dominate different pseudorapidity ranges of dihadron correlations. Because γ-triggered azimuthal correlations can only be caused by jet-medium interactions, a comparative study of hadron- and γ -triggered azimuthal correlations can reveal more dynamics about jet-medium interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Triggering of substorms by solar wind discontinuities

The probability of triggering of polar substorms by a large-scale magnetospheric compression associated with a discontinuity in the solar wind has been examined statistically using ground magnetogram data, AE index data and satellite geomagnetic data on 125 sudden storm commencements observed during 1967-1970. The triggering probability was found to depend on the amplitude of the sudden storm commencement and on the degree of preceding AE activity. In almost all cases the triggering occurred when the B-Z component of the interplanetary magnetic field was negative or decreasing during the 30 min before the passage of the discontinuity. Transient geomagnetic responses with a time scale of Alfven wave propagation in the polar cap also depend on interplanetary magnetic field conditions.

Kokubun, S.↗