Search NASA⌕ Search

SEARCH · Search NASA

Results for “University Programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Report on the Activities Associated with FUSE Cycle 3 GI Program C153 While the PI Was at Johns Hopkins University

The goal of this program is to determine the intensity of O VI resonance line photons (1032, 1038 A) originating in the Galactic halo. This is being done by measuring the intensity along an unobscured line of sight and subtracting the local intensity from it. Two members of the team, Robin Shelton and Shauna Sallmen, have independently measured the O VI intensity on the unobscured line of sight. Our methods differ in many ways and we are making the extra effort to understand how systematic variations in method are leading to different measurements. We think that this is worthwhile because it will give us a better understanding of how to compare already published results obtained with these various methods.

Dreyfus, Barbara↗

Investigation of infra-red and nonequilibrium air radiation

This report describes progress on the first year of a research program on the infrared radiation of air plasmas conducted in the High Temperature Gasdynamics Laboratory at Stanford University. This program is intended to investigate the masking of infrared signatures by the air plasma formed behind the bow shock of high velocity missiles. To this date, the radiative emission of air plasmas in the infrared has been the object of few experimental investigations, and although several infrared systems are already modeled in radiation codes such as NEQAIR, measurements are required to validate numerical predictions and indicate whether all transitions of importance are accounted for. The present program is motivated by the fact that 9 excited states (A, B, C, D, B', F, H, and H') of NO radiate in the infrared, especially between 1 and 1.5 microns where at least 9 transitions involving can be observed. Because these IR transitions are relatively well separated from each other, excited NO states concentrations can be easily measured, thus providing essential information on excited-state chemistry for use in optical diagnostics or in electronic excitation model validation. Developing accurate collisional-radiative models for these excited NO states is of importance as the UV-VUV transitions of NO (beta, gamma, epsilon, beta prime, gamma prime) produce a major, if not dominant, fraction of the radiation emitted by air plasmas. During the first year of the program, research has focused on the spectral range 1.0 to 1.5 microns, as detailed in Section 2 of this report. The measurements, conducted in a 50 kW radio-frequency inductively coupled plasma torch operating on air at atmospheric pressure, extend previous shock tube investigations by Wray to a wider spectral range (1.0 to 1.5 microns vs 0.9 to 1.2 microns) and higher temperatures (7600 K in the plasma torch versus 6700 K in the shock-tube). These higher temperatures in the present experiment have made it possible to observe high-lying excited NO states that were previously undetectable. These measurements are currently being extended up to 5 microns, with particular attention paid to the rovibronic bands of ground state NO, molecular continua, CO transitions, and other systems of importance. Publications and presentations resulting from or related to this work are cited in Section 3, and Section 4 lists the personnel who contributed to this report.

Kruger, Charles H.↗

Investigation of Infra-red and Nonequilibrium Air Radiation

This report summarizes the results obtained during a research program on the infrared radiation of air plasmas conducted in the High Temperature Gasdynamics Laboratory at Stanford University. This program was intended to investigate the masking of infrared signatures by the air plasma formed behind the bow shock of high velocity missiles. Prior to this work, the radiative emission of air plasmas in the infrared had been the object of few experimental investigations, and although several infrared systems were already modeled in radiation codes such as NEQAIR, measurements were required to validate numerical predictions and indicate whether all transitions of importance were accounted for in the model. The program was further motivated by the fact that 9 excited states (A, B, C, D, B', F, H, and H') of NO radiate in the infrared, especially between 1 and 1.5 microns where at least 9 transitions involving can be observed. Because these IR transitions are relatively well separated from each other, excited NO states concentrations can be easily measured, thus providing essential information on excited-state chemistry for use in optical diagnostics or in electronic excitation model validation. Detailed comparisons between measured and simulated spectra are presented.

Kruger, Charles H.↗

Hypersonic research at Stanford University

The status of the hypersonic research program at Stanford University is discussed and recent results are highlighted. The main areas of interest in the program are the numerical simulation of radiating, reacting and thermally excited flows, the investigation and numerical solution of hypersonic shock wave physics, the extension of the continuum fluid dynamic equations to the transition regime between continuum and free-molecule flow, and the development of novel numerical algorithms for efficient particulate simulations of flowfields.

Candler, Graham↗

University of Arizona High Energy Physics Program at the Cosmic Frontier 2014-2016

This is the final technical report from the University of Arizona High Energy Physics program at the Cosmic Frontier covering the period 2014-2016. The work aims to advance the understanding of dark energy using the Large Synoptic Survey Telescope (LSST). Progress on the engineering design of the power supplies for the LSST camera is discussed. A variety of contributions to photometric redshift measurement uncertainties were studied. The effect of the intergalactic medium on the photometric redshift of very distant galaxies was evaluated. Computer code was developed realizing the full chain of calculations needed to accurately and efficiently run large-scale simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

National Geodetic Satellite Program, Part II: Ohio State University

Data analysis was carried out to obtain an improved global network combining all participating tracking stations in a single worldwide coordinate system. Mathematical formulations were derived, programmed, and tested. Observational data were used to determine the relative positions of tracking stations in an arbitrary Cartesian coordinate system. The position of this coordinate system was estimated with respect to an absolute system. A primary network was established in which station positions were known to an internal consistency of 10 meters or better for the following purposes: (1) to establish the relative relationships between the various geodetic datums in use around the world; and (2) to connect isolated tracking stations, islands, navigational beacons, and other points of interest. Results are presented.

Mueller, I. I.↗

Progress in Development of Fluoride-salt-cooled High-Temperature Reactors (FHRs)

Fluoride-salt-cooled High-temperature Reactors (FHRs) are a new class of reactors that use graphite-matrix coated-particle fuel with a clean liquid salt coolant. The largest university FHR program is an Integrated Research Project (IRP) sponsored by the U.S. Department of Energy and others that is led by the Massachusetts Institute of Technology (MIT) and includes the University of California at Berkeley (UCB), the University of Wisconsin (UW), and the University of New Mexico (UNM). The year 2016 was the fifth year of this program. We report herein some of the major results of work done in 2016. The base-line FHR concept studied in this IRP uses (1) graphite-matrix coated-particle fuel with a pebble bed geometry and (2) a clean liquid salt coolant-flibe (a mixture of {sup 7}LiF and BeF{sub 2}). The combination of a very high-temperature fuel with failure temperatures above 1650 deg. C, a coolant boiling point above 1400 deg. C, and a coolant that traps most fission products implies the capability to assure no major fuel failure under severe accident conditions. There are a family of FHR concepts using different fuel geometries and different fluoride salts. The power conversion system is a Nuclear Air-Brayton Combined Cycle (NACC) with peak power provided by natural gas or a Firebrick Resistance Heated Energy Storage (FIRES) system. This enables a base-load reactor to provide variable electricity to the grid that substantially increases revenue relative to base-load nuclear reactors. Most of the results reported herein are applicable to most FHR concepts as well as liquid-fueled molten salt reactors (MSRs)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Program for advanced study in public science policy and administration

The results and conclusions of the six-year effort concerned with the development and implementation of a university educational program intended to prepare scientists and engineers for upper-level management and administrative positions (as distinct from senior technical positions) were presented. This interdisciplinary program is at the graduate level, leading to a Master of Arts degree, and is given within a Division of Public Administration.

Rosenthal, A. H.↗

De Novo Design of High‐Affinity Miniprotein Binders Targeting Francisella Tularensis Virulence Factor

Abstract Francisella tularensis poses considerable public health risk due to its high infectivity and potential for bioterrorism. Francisella‐like lipoprotein (Flpp3), a key virulence factor unique to Francisella, plays critical roles in infection and immune evasion, making it a promising target for therapeutic development. However, the lack of well‐defined binding pockets and structural information on native interactions has hindered structure‐guided ligand discovery against Flpp3. Here, we used a combination of physics‐based and deep‐learning methods to design high‐affinity miniprotein binders targeting two distinct sites on Flpp3. We identified four binders for site I with binding affinities ranging between 24–110 nM. For the second site, an initial binder showed a dissociation constant ( K D ) of 81 nM, and subsequent site saturation mutagenesis yielded variants with sub‐nanomolar affinities. Circular dichroism confirmed the topology of designed miniproteins. The X‐ray crystal structure of Flpp3 in complex with a site I binder is nearly identical to the design model (Cα root‐mean‐square deviation (RMSD): 0.9 Å). These designed miniproteins provide research tools to explore the roles of Flpp3 in tularemia and should enable the development of new therapeutic candidates.

Gokce‐Alpkilic, Gizem [Molecular Engineering and S↗

Advice for emerging researchers on research program development: A personal case study

Yearly, hundreds of new scientists and engineers start their independent research programs at universities, government laboratories or other institutions. Every individual embarks on this pathway with some idea about what research directions they wish to undertake, but often, with little insight into how their research career may evolve over time. Additionally, there are relatively few descriptions of how the research programs of other scientists and engineers have developed over time. In most cases where such overviews are available, they are written towards the end of a researcher's career, at a point far from the early development of the program. In this work, I provide my personal thoughts and observations on the development and evolution of the first 16 years of my research program as a case study. This overview does not intend to suggest this particular case as an exemplar, but rather, provides a single example of how one program evolved. In the course of the description, I try to identify general observations and suggestions that might aid a new researcher in the chemical sciences or engineering in the development of their research program. Specifically, the focus is on a program where the newly independent investigator has significant autonomy to select research topics of her/his choice (e.g., many universities, some government or corporate labs), although it is recognized that in many organizations, a researcher must fit into and adapt to the specific needs of the host institution. A particular aspect of my research program is that it blends research on (1) materials chemistry, (2) catalysis and reaction engineering, and (3) separations. As such, I will draw from specific examples of my own work in these fields as part of the discussion. However, the reader should note that this perspective is not a traditional overview of the full breadth of the title research topic, although my group has written such reviews and perspectives on a variety of the subjects covered here.1-6 Instead, here I discuss how my program evolved in stages, including (1) the search for a position, (2) launching your laboratory, (3) development of research themes and finishing with (4) a summary of advice for researchers starting their independent laboratories.

36 MATERIALS SCIENCE↗

Trends in Human Spaceflight: Failure Tolerance, High Reliability and Correlated Failure History

In a half century of human spaceflight, NASA has continuously refined agency safety and reliability requirements in response to mission demands, critical failures, and technology development. Early spacecraft, including Mercury, Gemini and Apollo vehicles, were highly reliant on dissimilar redundancy and demonstrated test margins. Later programs, such as the reusable Space Transportation System (STS) and International Space Station (ISS), introduced probabilistic studies and isolated two-failure tolerance to improve robustness at the expense of added complexity. More recently, the Orion Multi-Program Crew Vehicle (MPCV) program adopted universal single-failure tolerance with two categorical exceptions; Zero-Failure Tolerant (0FT) and Design for Minimum Risk (DFMR) hardware. Failure tolerance variances are defined and managed in accordance with agency human-rating requirements, and require concurrence from program Technical Authorities (TA) as well as the MPCV Safety and Mission Assurance Safety and Engineering Review Panel (MSERP). To understand and reaffirm standards applied to Apollo, Space Shuttle and Orion vehicles, Orion and Deep Space Gateway Safety and Mission Assurance (S&MA) representatives conducted accelerated research to compare unique safety and reliability criteria against ground and flight anomalies, based on information contained in post-mission reports and the Problem Reporting and Corrective Action (PRACA) database. In some cases, high-profile failures and narrow escapes have reinforced decisions to maintain or adapt safety requirements. In others, empirical trends have highlighted the need for vigilance and innovative safety guidelines. Given the inability to achieve absolute compliance with evolving safety and reliability requirements, the team conducted a targeted review of DFMR and 0FT propulsion elements within the framework of changing system design, inspection, materials and process developments to formulate conclusions on technological maturity, failure density, and net changes in safety risk. Based on the aggregate performance of high-reliability and failure-tolerant systems, the authors have attempted to establish best practices and guidelines to inform future program decisions. On a somewhat cautionary note, this study is not intended to direct a universal set of requirements for future missions based on prior lessons learned. Spacecraft safety is a multi-variable problem, and attempts to mitigate past failures will not guarantee future success. However, this assessment offers a retrospective review of policy changes, implementation and effectiveness. In the future, NASA, European Space Agency (ESA) and industry partners may benefit from a more robust correlation between requirements and performance, as space-faring nations work toward more challenging, complex and long-duration commercial and deep-space ventures.

Green, Carrie↗

Contributions of the SCK.CEN Academy to education and training in nuclear science and technology

Thanks to its thorough experience in the field of nuclear science and technology, its innovative research and the availability of large and unique nuclear installations, SCK.CEN is not only a renowned nuclear research institution, but also an important partner for nuclear education and training in Belgium as well as at international level. Within the SCK.CEN Academy, more than 60 years of nuclear expertise and experience gained from our different research projects is collected and transferred. In the interest of maintaining a competent workforce in industry, Healthcare, research, and policy, and of transferring nuclear knowledge and skills to the next generations, the SCK.CEN Academy takes it as its mission to: - provide guidance for students and early-stage researchers; - organize academic courses and customized training for professionals; - offer policy support with regard to education and training matters; - care for critical-intellectual capacities for society. Specifically in the domain of nuclear instrumentation the SCK.CEN Academy provides an opportunity to students at Bachelor, Master and PhD level to make use of the SCK.CEN infrastructure to support their thesis research or to perform an internship with the aim to improve and extend their knowledge and skills in a specific research or technical domain. Further, they can contribute to new findings in the field of nuclear instrumentation. The students are guided by our scientists, engineers and technicians who have years of experience in the relevant field. In addition, the SCK.CEN Academy contributes to traditional university education programs and delivers courses in several nuclear topics such as dosimetry. We also coordinate the Belgian Nuclear higher Engineering Network (BNEN), a one year (60 ECTS) master-after-master specialization in nuclear engineering in which 6 Belgian universities and SCK.CEN are involved. Beyond the contributions to academic education, we also provide several customized training programs tailored to the needs of the learners in terms of content, duration, level, language, location, etc. Complementary to the theoretical classes, ample attention is given to practical sessions and technical visits are foreseen which enable trainees to enrich and illustrate their acquired knowledge with the practice of real-life situations. In this poster presentation an overview will be given of the activities in the domains described above. Moreover it will be shown how these initiatives are embedded in the most recent European approaches to nuclear education and training via collaboration in several EU projects and networks. (authors)

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Cold Flow Testing for Liquid Propellant Rocket Injector Scaling and Throttling

Scaling and throttling of combustion devices are important capabilities to demonstrate in development of liquid rocket engines for NASA's Space Exploration Mission. Scaling provides the ability to design new injectors and injection elements with predictable performance on the basis of test experience with existing injectors and elements, and could be a key aspect of future development programs. Throttling is the reduction of thrust with fixed designs and is a critical requirement in lunar and other planetary landing missions. A task in the Constellation University Institutes Program (CUIP) has been designed to evaluate spray characteristics when liquid propellant rocket engine injectors are scaled and throttled. The specific objectives of the present study are to characterize injection and primary atomization using cold flow simulations of the reacting sprays. These simulations can provide relevant information because the injection and primary atomization are believed to be the spray processes least affected by the propellant reaction. Cold flow studies also provide acceptable test conditions for a university environment. Three geometric scales - 1/4- scale, 1/2-scale, and full-scale - of two different injector element types - swirl coaxial and shear coaxial - will be designed, fabricated, and tested. A literature review is currently being conducted to revisit and compile the previous scaling documentation. Because it is simple to perform, throttling will also be examined in the present work by measuring primary atomization characteristics as the mass flow rate and pressure drop of the six injector element concepts are reduced, with corresponding changes in chamber backpressure. Simulants will include water and gaseous nitrogen, and an optically accessible chamber will be used for visual and laser-based diagnostics. The chamber will include curtain flow capability to repress recirculation, and additional gas injection to provide independent control of the backpressure. This paper provides a short review of the appropriate literature, as well as descriptions of plans for experimental hardware, test chamber instrumentation, diagnostics, and testing.

Kenny, Jeremy R.↗

Integration of NASA Research into Undergraduate Education in Math, Science, Engineering and Technology at North Carolina A&T State University

The NASA PAIR program incorporated the NASA-Sponsored research into the undergraduate environment at North Carolina Agricultural and Technical State University. This program is designed to significantly improve undergraduate education in the areas of mathematics, science, engineering, and technology (MSET) by directly benefiting from the experiences of NASA field centers, affiliated industrial partners and academic institutions. The three basic goals of the program were enhancing core courses in MSET curriculum, upgrading core-engineering laboratories to compliment upgraded MSET curriculum, and conduct research training for undergraduates in MSET disciplines through a sophomore shadow program and through Research Experience for Undergraduates (REU) programs. Since the inception of the program nine courses have been modified to include NASA related topics and research. These courses have impacted over 900 students in the first three years of the program. The Electrical Engineering circuit's lab is completely re-equipped to include Computer controlled and data acquisition equipment. The Physics lab is upgraded to implement better sensory data acquisition to enhance students understanding of course concepts. In addition a new instrumentation laboratory in the department of Mechanical Engineering is developed. Research training for A&T students was conducted through four different programs: Apprentice program, Developers program, Sophomore Shadow program and Independent Research program. These programs provided opportunities for an average of forty students per semester.

Monroe, Joseph↗

Investigation of Air Transportation Technology at Princeton University, 1989-1990

The Air Transportation Technology Program at Princeton University proceeded along six avenues during the past year: microburst hazards to aircraft; machine-intelligent, fault tolerant flight control; computer aided heuristics for piloted flight; stochastic robustness for flight control systems; neural networks for flight control; and computer aided control system design. These topics are briefly discussed, and an annotated bibliography of publications that appeared between January 1989 and June 1990 is given.

Stengel, Robert F.↗

Investigation of air transportation technology at Princeton University: 1993-1994

The Air Transportation Research Program at Princeton University proceeded along four avenues during the past year: microburst hazards to aircraft; wind rotor hazards to aircraft; flight control system robustness; and intelligent aircraft/airspace systems. This research has resulted in a number of publications, including theses, archival papers, and conference papers. An annotated bibliography of publications that appeared between June 1993 and June 1994 appears at the end of this report.

Stengel, Robert F.↗

NREL's Student Training in Applied Research Program

The NREL Student Training in Applied Research (STAR) internship is a year-long program that provides undergraduate students from minority-serving institutions the opportunity to contribute to cutting-edge research while progressing in their studies at their home universities. The program connects students and faculty with NREL's team to foster a future generation of industry leaders and sustained research engagement.

ENERGY PLANNING, POLICY, AND ECONOMY↗

Laminar Dust Flames: A Program of Microgravity and Ground Based Studies at McGill

Fundamental knowledge of heterogeneous combustion mechanisms is required to improve utilization of solid fuels (e.g. coal), safe handling of combustible dusts in industry, and solid propulsion systems. The objective of the McGill University research program on dust combustion is to obtain a reliable set of data on basic combustion parameters for dust suspensions (i.e. laminar burning velocity, flame structure, quenching distance, flammability limits, etc.) over a range of particle sizes, dust concentrations, and types of fuel. This set of data then permits theoretical models to be validated and, when necessary, new models to be developed to describe the detailed reaction mechanisms and transport processes. Microgravity is essential to the generation of a uniform dust suspension of arbitrary particle size and concentration. When particles with a characteristic size on the order of tens of microns are suspended, they rapidly settle in a gravitational field. To maintain a particulate in suspension for time duration adequate to carry out combustion experiments invariably requires continuous convective flow in excess of the gravitational settling velocity (which is comparable with and can even exceed the dust laminar burning velocity). This makes the experiments turbulent in nature and thus renders it impossible to study laminar dust flames. Even for small particle sizes on the order of microns, a stable laminar dust flow can be maintained only for relatively low dust concentrations at normal gravity conditions. High dust loading leads to gravitational instability of the dust cloud and to the formation of recirculation cells in the dust suspension in a confined volume, or to the rapid sedimentation of the dense dust cloud, as a whole, in an unconfined volume. Many important solid fuels such as carbon and boron also have low laminar flame speeds (of the order of several centimeters per second). Convection that occurs in combustion products due to buoyancy disrupts the low speed dust flames and makes observation of such flames at normal gravity difficult.

Goroshin, Sam↗