Search NASA⌕ Search

SEARCH · Search NASA

Results for “Variational Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Characteristics of the motions, turbulence intensity, diffusivity, flux of momentum and sensible heat in the upper atmosphere

Analyses of the meteorological rocket data obtained from an experiment conducted at 3-hour intervals at 8 western meridional rocket stations are presented. Large variations in the meridional wind contribute substantially to overall turbulence in the tropical stratosphere. The solar semidiurnal component of wind oscillations in the tropics was observed to be much higher than predicted by theory, often exceeding the magnitude of the diurnal amplitude throughout the stratosphere. The observed value of the solar diurnal amplitude in the stratosphere was in line with theoretical prediction. The solar terdiurnal amplitudes for temperature, meridional and zonal winds were non-negligible and must be considered in any harmonic analysis. Phase angle variation with height was rapid for all harmonics; however, there was general agreement between predicted and observed phase angles. Because of large changes in the mean winds in the mesosphere with season, harmonic determinations are difficult. There appear to be large zonal wind changes even within the same season as mentioned previously. Turbulence diffusivity in the upper stratosphere is greater near the equator than in the mid-latitudes.

Kao, S. K.↗
NASA NTRS1977

The measurements of latitude, time, and height variations at a single laser tracking station

Recent analysis of laser data for determining variation of latitude have been based on apparent variations in the orbital inclination of the satellite derived from short orbital arcs of 6-8 hours. An alternative method, based on the daily adjustment of the station position to a much longer arc of 2 or 3 weeks has recently been developed and tested. In the new method a long orbital arc is derived from many days of data and is subsequently used as a reference orbit for the adjustment of the position of the station (only) on each day of the long arc for which tracking data are available. This new technique appears to give slightly better results when it is applied to a test period in August 1970, with the added advantage that earth rotation measurements can be derived from the same data at the same time. The results for the test period indicate a precision of 74 cm in variation of latitude and 0.81 ms in monitoring the earth's rotation with 6 hours of data.

Dunn, P. J.↗
DOE OSTI2024

Single-colony MALDI mass spectrometry imaging reveals spatial differences in metabolite abundance between natural and cultured Trichodesmium morphotypes

Trichodesmium, a globally significant N 2 -fixing marine cyanobacterium, forms extensive surface blooms in nutrient-poor ocean regions. These blooms consist of a dynamic assemblage of Trichodesmium species that form distinct colony morphotypes and are inhabited by diverse microorganisms. Trichodesmium colony morphotypes vary in ecological niche, nutrient uptake, and organic molecule release, differentially impacting ocean carbon and nitrogen biogeochemical cycles. Here, we assessed the poorly studied spatial abundance of metabolites within and between three morphologically distinct Trichodesmium colonies collected from the Red Sea. We also compared these results with two morphotypes of the cultivable Trichodesmium strain IMS101. Using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry imaging (MSI) coupled with liquid extraction surface analysis (LESA) tandem mass spectrometry (MS2), we identified and localized a wide range of small metabolites associated with single-colony Trichodesmium morphotypes. Our untargeted MALDI-MSI approach revealed 80 unique features (metabolites) shared between Trichodesmium morphotypes. Discrimination analysis showed spatial variations in 57 shared metabolites, accounting for 62% of the observed variation between morphotypes. The greatest variations in metabolite abundance were observed between the cultured morphotypes compared to the natural colony morphotypes, suggesting substantial differences in metabolite production between the cultivable strain IMS101 and the naturally occurring colony morphotypes that the cultivable strain is meant to represent. This study highlights the variations in metabolite abundance between natural and cultured Trichodesmium morphotypes and provides valuable insights into metabolites common to morphologically distinct Trichodesmium colonies, offering a foundation for future targeted metabolomic investigations.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2016

Exploring and Analyzing Climate Variations Online by Using NASA MERRA-2 Data at GES DISC

NASA Giovanni (Goddard Interactive Online Visualization ANd aNalysis Infrastructure) (http:giovanni.sci.gsfc.nasa.govgiovanni) is a web-based data visualization and analysis system developed by the Goddard Earth Sciences Data and Information Services Center (GES DISC). Current data analysis functions include Lat-Lon map, time series, scatter plot, correlation map, difference, cross-section, vertical profile, and animation etc. The system enables basic statistical analysis and comparisons of multiple variables. This web-based tool facilitates data discovery, exploration and analysis of large amount of global and regional remote sensing and model data sets from a number of NASA data centers. Long term global assimilated atmospheric, land, and ocean data have been integrated into the system that enables quick exploration and analysis of climate data without downloading, preprocessing, and learning data. Example data include climate reanalysis data from NASA Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) which provides data beginning in 1980 to present; land data from NASA Global Land Data Assimilation System (GLDAS), which assimilates data from 1948 to 2012; as well as ocean biological data from NASA Ocean Biogeochemical Model (NOBM), which provides data from 1998 to 2012. This presentation, using surface air temperature, precipitation, ozone, and aerosol, etc. from MERRA-2, demonstrates climate variation analysis with Giovanni at selected regions.

knowledge base↗
NASA NTRS1991

On the Power of Abstract Interpretation

Increasingly sophisticated applications of static analysis place increased burden on the reliability of the analysis techniques. Often, the failure of the analysis technique to detect some information my mean that the time or space complexity of the generated code would be altered. Thus, it is important to precisely characterize the power of static analysis techniques. We follow the approach of Selur et. al. who studied the power of strictness analysis techniques. Their result can be summarized by saying 'strictness analysis is perfect up to variations in constants.' In other words, strictness analysis is as good as it could be, short of actually distinguishing between concrete values. We use this approach to characterize a broad class of analysis techniques based on abstract interpretation including, but not limited to, strictness analysis. For the first-order case, we consider abstract interpretations where the abstract domain for data values is totally ordered. This condition is satisfied by Mycroft's strictness analysis that of Sekar et. al. and Wadler's analysis of list-strictness. For such abstract interpretations, we show that the analysis is complete in the sense that, short of actually distinguishing between concrete values with the same abstraction, it gives the best possible information. We further generalize these results to typed lambda calculus with pairs and higher-order functions. Note that products and function spaces over totally ordered domains are not totally ordered. In fact, the notion of completeness used in the first-order case fails if product domains or function spaces are added. We formulate a weaker notion of completeness based on observability of values. Two values (including pairs and functions) are considered indistinguishable if their observable components are indistinguishable. We show that abstract interpretation of typed lambda calculus programs is complete up to this notion of indistinguishability. We use denotationally-oriented arguments instead of the detailed operational arguments used by Selur et. al.. Hence, our proofs are much simpler. They should be useful for further future improvements.

Reddy, Uday S.↗
NASA NTRS1989

Preliminary examination of the Yamato-86032 lunar meteorite. II - Major and trace element chemistry

Results of the chemical composition analysis of Yamato-86032, found in Antarctica in 1986, are summarized. The meteorite may be classified as an anorthositic breccia, but its trace element composition is different from the composition of the other known lunar meteorites. The major element chemistry of Y-86032 is similar to the other lunar meteorites, except for the iron content, which is lower by a factor of about 1.4. The abundances of incompatible and lithophile elements such as Zr, Hf, Ta, Th, or the REEs are very low and comparable to Y-82192/3. Other elements, in particular Fe, Ti, Sc, Cr, Mn, and Co, have lower abundances in Y-86032 than in Y-82192/3. Variations between individual analysis demonstrate that the rock itself is heterogeneous.

Koeberl, Christian↗
NASA NTRS2004

Study of CFD Variation on Transport Configurations from the Second Drag-Prediction Workshop

This paper describes and analyzes a series of nearly 90 CFD test cases performed as a contribution to the second Drag Prediction Workshop, held in association with the AIAA in June 2003. Two configurations are included: DLR-F6 wing-body and wing-body-nacelle-pylon. The ability of CFD to predict the drag, lift, and pitching moment from experiment-including the "delta" arising from the addition of the nacelle and pylon-is assessed. In general, at a fixed angle of attack CFD overpredicts lift, but predicts the delta C (sub L) reasonably well. At low lift levels (C (sub L) less than 0.3)), delta C (sub D) is 20-30 drag counts (30-45%) high. At the target lift coefficient of C(sub L) = 0.5, delta C (sub D) is overpredicted by between 11-16 counts. However, the primary contribution of this paper is mot so much the assessment of CFD against experiment, but rather a detailed assessment and analysis of CFD variation. The series of test cases are designed to determine the sensitivity/variability of CFD to a variety of factors, including grid, turbulence model, transition code, and viscous model. Using medium-level grids (6-11 million points) at the target lift coefficient, the maximum variation in drag due to different grids is 5-11 drag counts, due to code is 5-10 counts, due to turbulence model is 7-15 counts, due to transition is 10-11 counts, and due to viscous model is 4-5 counts. Other specific variations are described in the paper.

Christopher L Rumsey↗
NASA NTRS1993

Diurnal and Semidiurnal Variations in Earth Rotation

During the last decade there has been an unprecedented improvement in both the accuracy, the temporal resolution of Earth's rotation measurements. Determination of the position of the Earth's rotation axis both in inertial space and with respect to the crust with accuracies of about 0.3 milliarcseconds (mas) are now routine. In recent years, there has been and emphasis on the determination of short-period (daily and less) variations in Earth rotation. Two space based geodetic systems, very long baseline interferometry (VLBI) and the global positioning system (GPS) have proved to be very successful in this endeavor. Results for the tidally coherent part of the subdaily Earth rotation variations determined from the analysis of VLBI data are discussed. The magnitude of other subdaily variations are also considered.

Herring, T.↗
NASA NTRSDate not supplied

Guanine Oxidation in the Genome, not RNA Editing, Accounts for Single Nucleotide Variation in the Exome of Mice Flown on Board the ISS

We have conducted a further analysis of single nucleotide variation (somatic mutation) in mice flown aboard the ISS. We used data archived in GeneLab from a cohort of 18-week-old mice were flown to the ISS, housed in the Rodent Habitat and therefore subjected to microgravity for 37 days. Mice of similar age, sex and the same strain were used for ground controls housed in identical hardware and simulating, but not matching ISS environmental conditions (temperature, humidity and gas atmosphere). Primary data consists of next generation RNA sequencing for the tissues examined: eye, liver, skeletal muscle and kidney. We used novel software, developed at NASA Ames Research Center and deployed on the NASA Ames Supercomputer, to perform variant calling for single point mutations. Unexpectedly, we discovered a high degree of somatic mutation in ISS-flown mice, compared to controls. We found that the extent of somatic mutation correlated with the degree of gene expression in the four tissue types, with the highest degree of somatic mutation observed in genes with the highest degree of expression. Careful analysis that included measurement of specific nucleotide changes that occurred demonstrated that guanine substitutions were the most frequent, consistent with the hypothesis that reactive oxygen species-mediated guanine oxidation was responsible for the hypermutation events. By contrast, adenine substitutions would be expected if gene editing were responsible for the somatic mutation. These types of substitutions were much less frequent. The implication of these findings for astronaut health in a variety of mission scenarios will be discussed.

International Space Station↗
NASA NTRS1979

Geomagnetic Sq variation at satellite altitudes - Is Sq correction important in Magsat data analysis

By a spherical harmonic expansion of the magnetic potential the geomagnetic Sq variation is shown to have peak-to-peak amplitudes of a few tens of nanotesla at 400 km altitude. It is shown, in particular, that for harmonics of degree n up to about 4, with which Sq can be well represented, the vertical component of the magnetic field at altitudes to about 400 km is virtually the same as on the ground. Even though the NASA's Magnetic Field Satellite (Magsat), scheduled for launch in September 1979, is planned to be placed in a twilight sun-synchronous orbit, Sq over certain areas of the earth can be of comparable magnitude as magnetic anomalies of geological origin sought in the data. Due consideration should be given to Sq as well as to the effects from magnetospheric sources in analyzing the Magsat data. The Sq effect is expected to be large during the period of Magsat operation which is near the predicted solar maximum.

Sugiura, M.↗
DOE OSTI2025

Cultivating clarity: understanding the impact of land cost assumptions on biofuel viability

The transition to sustainable energy has increased interest in biofuel production to reduce greenhouse gas emissions, decrease reliance on imported oil, and ensure energy resilience. Here, this study examines the often-overlooked impact of land cost assumptions on the economic viability of biofuel production. Using a discounted cash flow techno-economic framework, we evaluated three land cost scenarios—no land costs, land rental costs, and land purchase costs—across six bioenergy feedstocks (corn, soybeans, switchgrass, miscanthus, poplar, and microalgae) and three biofuel products (corn ethanol, soybean biodiesel, and sustainable aviation fuel) at the county level for the contiguous United States. The analysis reveals substantial variation in minimum fuel selling prices due to these scenarios. High-yield crops like algae showed low sensitivity to land costs, while low-yield crops such as soybeans were highly sensitive. Geographical differences were significant, with minimum fuel selling price increases most pronounced in high-value land regions like the Corn Belt. Case studies further illustrate the influence of local productivity and land costs on economic outcomes across the United States. These findings emphasize the importance of maintaining consistent land cost assumptions in biofuel economic assessments. By quantifying the interplay between land value, crop productivity, and economic feasibility, this study provides essential insights for policymakers and stakeholders to advance sustainable energy solutions.

09 BIOMASS FUELS↗
DOE OSTI2026

The biogeography of soil and airborne fungi in the Southwestern USA in relation to climate and vegetation

To assess how fungal dispersal might respond to climate change, we examined how climate and geography influence the regional distribution of fungi in soil and air. Specifically, we hypothesized that neighboring fungal communities should be more similar than distant communities (i.e. spatially autocorrelated) and that fungal dispersal should be more limited in soil than in air. We collected soil and air samples from 60 sites across five states in the Southwestern USA. Then, we sequenced the ITS2 region to identify fungal taxa in each sample. Next, we used distance-based redundancy analysis to partition variation in fungal community composition between climate variables and spatial structure. Fungi were indeed spatially autocorrelated. Moreover, precipitation, maximum vapor pressure deficit, and soil moisture were significantly related to fungal community composition in soils. In comparison, only precipitation was significantly related to community composition in the air. After accounting for climate, the strength of spatial autocorrelation did not differ significantly in soilborne versus airborne fungi. Dispersal limitation was evident in soilborne fungi at short distances (<100 km) and was not observed at any distance in airborne fungi. Altogether, climate may influence which fungal taxa are present in soil and air, and fungi could feasibly wind disperse over regional scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Geospatial analysis of preterm and small-for-gestational age births in Washington D.C.

Background: This study is based on the recognition that adverse pregnancy outcomes significantly affect maternal and infant health, leading to increased morbidity and mortality. These outcomes are shaped by a complex interplay of individual-level factors—like maternal age and education—and community-level influences, including socio-economic status and access to healthcare. Understanding these determinants is crucial for developing effective public health strategies, especially for marginalized populations, by identifying high-risk areas and informing targeted interventions that address both individual and structural barriers. Methods: We utilized geospatial analysis to explore the association between individual- and community-level factors and adverse pregnancy outcomes, specifically preterm birth (PTB) and small-for-gestational-age (SGA) birthweight in Washington, D.C. We used Empirical Bayes smoothing methods to calculate rates of adverse birth outcomes from 2010 to 2018 at the U.S. Census tract–level. Spatial scan statistics were used to investigate if adverse birth outcomes clustered in specific areas. ANOVA tests were conducted for individual- and community-level factors within identified clusters. Results: Spatial analysis identified significant high-risk clusters for PTB and SGA infants primarily in southeastern Washington, D.C., particularly in Wards 7 and 8. Individuals residing within these clusters experienced a 47% increased risk of PTB (RR = 1.467) and a 56% increased risk of SGA (RR = 1.560) compared to those outside clusters. Space–time analysis revealed temporal variation, with PTB clusters persisting from 2011 to 2014 and SGA clusters extending through 2017. Compared to low-risk clusters, high-risk clusters had younger birthing individuals (mean age ~26.5 vs. ~33 years), lower maternal college degree attainment (~20% vs. ~80%), higher rates of late or no prenatal care (~16% vs. 11%), and increased prevalence of smoking and hypertension (all P < 0.001). Community-level indicators showed lower median household incomes ($\$40,000$ vs. ~$\$105,000$), greater poverty (~16% vs. ~7% below $\$10,000$/year), higher public assistance use (~32% vs. ~5%), and reduced healthcare access (greater distances to emergency and specialty care) in high-risk areas (all P < 0.001). Neighborhood deprivation indices were significantly elevated, commutes were longer, and population density was lower in these clusters. These findings highlight that adverse birth outcomes cluster in neighborhoods with pronounced socioeconomic and health disparities. Conclusion: High-risk birth clusters highlight intertwined factors: individual, socio-economic, and geographic. Addressing these requires comprehensive interventions focusing on social and structural determinants of health.

Birth outcomes↗
DOE OSTI2025

Toward Standardized Microscale Tensile Testing for Two‐Photon Polymerization‐Fabricated Materials in Liquid

Two-photon polymerization (TPP) enables the fabrication of intricate 3D microstructures with submicron precision, offering significant potential in biomedical applications like tissue engineering. In such applications, to print materials and structures with defined mechanics, it is crucial to understand how TPP printing parameters impact the material properties in a physiologically relevant liquid environment. Herein, an experimental approach utilizing microscale tensile testing (μTT) for the systematic measurement of TPP-fabricated microfibers submerged in liquid as a function of printing parameters is introduced. Using a diurethane dimethacrylate-based resin, the influence of printing parameters on microfiber geometry is first explored, demonstrating cross-sectional areas ranging from 1 to 36 μm 2 . Tensile testing reveals Young's moduli between 0.5 and 1.5 GPa and yield strengths from 10 to 60 MPa. The experimental data show an excellent fit with the Ogden hyperelastic polymer model, which enables a detailed analysis of how variations in writing speed, laser power, and printing path influence the mechanical properties of TPP microfibers. The μTT method is also showcased for evaluating multiple commercial resins and for performing cyclic loading experiments. Collectively, this study builds a foundation toward a standardized microscale tensile testing framework to characterize the mechanical properties of TPP printed structures.

mechanical characterization↗
DOE OSTI2024

Impact of refrigerant undercharge faults on building indoor conditions and HVAC system operation in residential Buildings: A simulation study

This study investigates the impact of refrigerant undercharge on indoor temperature and HVAC system performance in residential buildings. Simulation models for typical residential buildings in Orlando, FL and Indianapolis, IN were developed using the ResStock database. A refrigerant undercharge fault model was then applied to the simulations with varying levels of fault intensity. The paper offers an extensive analysis, revealing that variations in supply air temperature, equipment runtime, and cooling energy consumption due to the level of refrigerant undercharge faults are notably significant on a summer representative day. Similarly, on a winter representative day, changes in supply air temperature and runtime are significant as well as changes in supplemental heat energy consumption. We find that occupants may remain oblivious to these faults during the cooling season, particularly when the HVAC system is oversized; in that case, supply air temperature data could help detect a fault. Another challenge is that during the heating season, when the supplemental heater operates, it is difficult to identify a refrigerant undercharge fault using only indoor and supply air temperature data. Finally, this study finds that supply air temperature, equipment runtime, and supplemental heater energy consumption data can help in detecting refrigerant undercharge faults.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Directed energy deposition of radially functionally graded nickel based superalloys IN625 and IN738: Microstructure and mechanical properties

This study investigates the microstructure and mechanical properties of radially functionally graded (RFG) materials fabricated from nickel-based superalloys IN625 and IN738 using directed energy deposition (DED). RFG cylindrical deposits with radial gradients of IN625-IN738 and IN738-IN625 were successfully fabricated and confirmed to be crack-free through tailored composition grading, scan strategy and process parameters that minimized thermal gradients and solidification velocities. Microstructural analysis revealed distinct variations across the gradient, characterized by differences in dendrite arm spacing, microsegregation, and the formation of distinct γ' precipitates and carbide/boride phases (MC, M 6 C, M 2 C, and MB 2 ) in as-deposited (AD) conditions, which evolved into M 23 C 6 and M 2 B upon subsequent heat treatment (HT). EBSD showed predominant columnar grains with a [100] texture, while microhardness profiles demonstrated consistent variation across the gradients. Mechanical testing highlighted the synergy of the graded structure, combining IN738's strength with IN625's ductility, resulting in enhanced properties such as a yield strength of 1131 MPa, ultimate tensile strength of 1382 MPa, and elongation of 12 % for HT IN625-IN738 grading. Numerical simulations employing CALPHAD thermodynamic calculations and finite element thermal modeling are used to establish phase evolution and microstructural feature correlation with thermal profiles, aiding in the optimization of process-structure-property relationship.

Additive manufacturing↗
DOE OSTI2024

Aeroelastic code comparison using the IEA 22MW reference turbine

Reference wind turbine designs and the associated aeroelastic models are widely used in both research and industry. Reference models representing future concepts are of particular interest. Current state of the art aeroelastic tools are relied upon to design the next generation of large wind turbines. However, modelling assumptions may be invalidated by upcoming very large turbines, and different aeroelastic tools may give inconsistent results. A 22MW turbine model has been defined as part of International Energy Agency (IEA) Wind Task 55 on Reference Wind Turbines and Farms to represent future turbines to be deployed in the 2030s. In this study, an aeroelastic model of this turbine has been created in four tools; Bladed, HAWC2, OpenFAST, and QBlade. Code comparisons are presented for steady state operation, linear stability analysis, and time domain power production simulations in steady and turbulent wind. Generally, the codes show a good agreement, but with some differences present in the linear stability analysis, periodic azimuthal variation, and time domain simulations. The models are a good basis for further study with the IEA 22MW turbine, and further code comparison exercises.

17 WIND ENERGY↗
DOE OSTI2026

Statistical Uncertainty of Inhalation Dose Coefficients in Consequence Management: Propagated Dose Uncertainty in ICRP 66 Human Respiratory Tract Model

Reference inhalation dose models rely on deterministic biokinetics and reference computational phantoms, limiting their applicability to the variability present in population-specific exposures encountered in emergency response scenarios. Here, this study introduces REDCAL, a Python-based computational framework developed to propagate uncertainty in inhalation dose coefficients using the International Commission on Radiological Protection (ICRP) Publication 66 Human Respiratory Tract Model. REDCAL integrates ICRP deposition and clearance models, systemic biokinetics, and governing physics principles, and leverages Sandia National Laboratories’ Dakota toolkit for uncertainty quantification via Latin Hypercube Sampling. REDCAL was validated against DCAL, with biokinetic retention results differing by less than 1% and effective dose coefficients by less than 2% across all tested radionuclides. Stochastic sampling introduced variability in dose coefficients, with geometric standard deviations (GSD) in committed effective dose coefficients (CEDC) ranging from 1.0 to 1.5, based on lognormal distribution fits. Analysis demonstrated that variations in the activity median aerodynamic diameter (AMAD) notably influenced the computed CEDC values. Smaller particles (<1 µm) increased doses by 20–30% due to deeper lung deposition and prolonged retention for alpha emitting radionuclides, such as 241 Am and 239 Pu. Radionuclides with fast clearance, such as 133 I, demonstrated a dose reduction exceeding 50%, as AMAD increased beyond 5 µm due to upper airway deposition and rapid mucociliary clearance. The greatest GSD among the radionuclides reported in this study was for 241 Am. In most cases, the largest GSDs in the CEDC were associated with larger particle sizes, an expected outcome, as ICRP Publication 66 defines GSD in particle size as a function of AMAD, resulting in an extended tail of the lognormal distribution. The findings support improved inhalation dose assessments and enhance consequence management strategies for the U.S. Federal Radiological Monitoring and Assessment Center by quantifying uncertainty in dose coefficients and strengthening decision-making for emergency response scenarios.

Biokinetic Modeling↗