Search NASA⌕ Search

SEARCH · Search NASA

Results for “WINGS, DELTA - CHARACTERISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Water tunnel results of leading-edge vortex flap tests on a delta wing vehicle

A water tunnel flow visualization test on leading edge vortex flaps was conducted at the flow visualization facility of the NASA Ames Research Center's Dryden Flight Research Facility. The purpose of the test was to visually examine the vortex structures caused by various leading edge vortex flaps on the delta wing of an F-106 model. The vortex flaps tested were designed analytically and empirically at the NASA Langley Research Center. The three flap designs were designated as full-span gothic flap, full-span untapered flap, and part-span flap. The test was conducted at a Reynolds number of 76,000/m (25,000/ft). This low Reynolds number was used because of the 0.076-m/s (0.25-ft/s) test section flow speed necessary for high quality flow visualization. However, this low Reynolds number may have influenced the results. Of the three vortex flaps tested, the part-span flap produced what appeared to be the strongest vortex structure over the flap area. The full-span gothic flap provided the next best performance.

Delfrate, J. H.↗
NASA NTRS1988

Measurement of Leading Edge Vortices from a Delta Wing Using a Three Component Laser Velocimeter

A demonstration of the capabilities of a three component laser velocimeter to provide a detailed experimental database of a complex flow field i s presented. The orthogonal three component laser velocimeter was used to measure the leading edge vortex flow field above a 75 degrees delta wing at angles-of-attack of 20.5 degrees and 40.0 degrees. The resulting mean velocity and turbulence intensity measurements are presented. The laser velocimeter is described in detail including a description of the data processing algorithm. A full error analysis was conducted and the results presented.

Meyers, James F.↗
NASA NTRS1988

Measurement of leading edge vortices from a delta wing using a three component laser velocimeter

A demonstration of the capabilities of a three-component laser velocimeter to provide a detailed experimental database of a complex flow field is presented. The orthogonal three-component laser velocimeter was used to measure the leading edge vortex flow field above a 75 deg delta wing at angles-of-attack of 20.5 deg and 40.0 deg. The resulting mean velocity and turbulence intensity measurements are presented. The laser velocimeter is described in detail including a description of the data processing algorithm. A full-error analysis was conducted and the results presented.

Meyers, James F.↗
NASA NTRS1989

Numerical studies of incompressible flow around delta and double-delta wings

The subject has been jointly investigated at NASA Langley Research Center and the Aerodynamisches Institut of the RWTH Aachen over a substantial period. The aim of this investigation has been to develop numerical integration procedures for the Navier-Stokes equations - particularly for incompressible three-dimensional viscous flows about simple and double delta wings - and to study the low speed flow behavior, with its complex vortex structures on the leeward side of the wing. The low speed flight regime poses unusual problems because high incidence flight conditions may, for example, encounter symmetric and asymmetric vortex breakdown. Because of the many difficulties to be expected in solving the problem, it was divided into two - analysis of the flow without vortex breakdown and analysis of the breakdown of isolated vortices. The major results obtained so far on the two topics are briefly described.

Krause, E.↗
NASA NTRS1985

Computation of transonic vortex flows past delta wings Integral equation approach

The steady full-potential equation is written in the form of Poisson's equation, and the solution of the velocity field is expressed in terms of an integral equation. The solution consists of a surface integral of vorticity distribution on the wing and its free-vortex sheets and a volume integral of source distribution within a volume around the wing and its free-vortex sheets. The solution is obtained through successive iteration cycles. The source distribution is computed by using a mixed finite-difference scheme of the Murman-Cole type. The method is applied to delta wings. Numerical examples show that a conical shock is captured on the suction side of the wing. It is attached to the lower surface of the leading-edge vortex but does not necessarily reach to the wing surface.

Kandil, O. A.↗
NASA NTRS1990

Connection between leading-edge sweep, vortex lift, and vortex strength for delta wings

An effort is made to clarify the effect of leading-edge sweep on the vortex lift and leading-edge vortex strength of a slender wing; while it is often assumed that increasing sweep enhances vortex lift and strength, the opposite is the case. The suction analogy is used in association with numerical and experimental data to derive simple formulas yielding the actual relationship for delta wings. The difference between vortex lift and nonlinear lift is highlighted.

Hemsch, Michael J.↗
NASA NTRS1977

Assessment of existing analytic methods for prediction of high angle-of-attack loads on delta wings at supersonic speeds

An assessment of the applicability of four loading prediction methods to high angle-of-attack conditions for simplified wing-body configurations is provided. The methods are: The tangent wedge approximation, the linear theory methods of Middleton and Woodward, and a shock-fitting finite-difference technique. Estimates obtained by these methods were compared with experimental pressure data on delta wings to examine the effects of Mach number, camber, sweep angle, and angle of attack. Results indicate that all of the methods provided reasonable estimates at moderate angles of attack. At these moderate angles of attack, the methods of Middleton and Woodward provided good estimates at Mach numbers higher than those usually associated with linear theory. Only the finite-difference method provided reasonable load estimates at high angles of attack.

Landrum, E. J.↗
NASA NTRS1981

Numerical solution of supersonic viscous flow over blunt delta wings

A general parabolized Navier-Stokes code has been developed to compute the steady supersonic viscous flow around arbitrary body shapes at high angles of attack. A nonorthogonal three-dimensional coordinate frame permits the code to march with solution surfaces which are the most appropriate. The code has been used to calculate the laminar flow over a slab delta wing with 70 deg sweep at angles of attack up to 41.5 deg and Mach numbers of 6.8 and 9.6. The computed shock shapes, surface pressures and heat transfer coefficients are compared with experiment and show agreement.

Tannehill, J. C.↗
NASA NTRS1992

Doppler global velocimeter measurements of the vortical flow above a thin delta wing

Doppler global velocimetry, currently under development by NASA for the measurement of off-surface flow fields, will allow quantification of complex, 3D flow fields at video-camera rates and accomplish the simultaneous measurement of an entire flow field structure within the given plane. In order to assess the performance capabilities of the technique, velocity measurements of the vortical flow field above a thin, 75-deg delta wing were conducted at NASA-Langley and compared with results obtained via three-component laser velocimeter. The achievement of performance goals is confirmed.

Usry, Jimmy W.↗
NASA NTRS1986

A direct and inverse boundary layer method for subsonic flow over delta wings

A new inverse boundary layer method is developed and applied to incompressible flows with laminar separation and reattachment. Test cases for two dimensional flows are computed and the results are compared with those of other inverse methods. One advantage of the present method is that the calculation of the inviscid velocities may be determined at each marching step without having to iterate. The inverse method was incorporated with the direct method to calculate the incompressible, conical flow over a slender delta wing at incidence. The location of the secondary separation line on the leeward surface of the wing is determined and compared with experiment for a unit aspect ratio wing at 20.5 deg incidence. The viscous flow in the separated region was calculated using prescribed skin friction coefficients.

Woodson, S. H.↗
NASA NTRS1972

Motion simulator study of longitudinal stability requirements for large delta wing transport airplanes during approach and landing with stability augmentation systems failed

A ground-based simulator investigation was conducted in preparation for and correlation with an-flight simulator program. The objective of these studies was to define minimum acceptable levels of static longitudinal stability for landing approach following stability augmentation systems failures. The airworthiness authorities are presently attempting to establish the requirements for civil transports with only the backup flight control system operating. Using a baseline configuration representative of a large delta wing transport, 20 different configurations, many representing negative static margins, were assessed by three research test pilots in 33 hours of piloted operation. Verification of the baseline model to be used in the TIFS experiment was provided by computed and piloted comparisons with a well-validated reference airplane simulation. Pilot comments and ratings are included, as well as preliminary tracking performance and workload data.

Snyder, C. T.↗
NASA NTRS1992

Three Component Doppler Global Velocimeter Measurements of the Flow Above A Delta Wing

A new measurement technique is being developed by NASA to measure off-surface flow fields. This method, Doppler global velocimetry, will allow quantification of complex three-dimensional flow fields at video camera rates. The entire flow field structure within a selected plane is measured simultaneously rather than by scanned, point-by-point measurements using conventional laser velocimetry. To assess the capability of this new technique, three - component velocity measurements of the vortical flow field above a thin 75-degree delta wing were made in the NASA Langley Basic Aerodynamics Research Tunnel. Measurements were made of the flow field at the 70-percent chord location at angles-of-attack of 20.5 and 40.0 degrees to investigate unburst and burst vortices. For comparison, previous fringe-type laser velocimeter measurements of the flow field at the same conditions are included.

Meyers, James F.↗
NASA NTRS1981

Correlation of Predicted and Flight Derived Stability and Control Derivatives with Particular Application to Tailless Delta Wing Configurations

Flight derived longitudinal and lateral-directional stability and control derivatives were compared to wind-tunnel derived values. As a result of these comparisons, boundaries representing the uncertainties that could be expected from wind-tunnel predictions were established. These boundaries provide a useful guide for control system sensitivity studies prior to flight. The primary application for this data was the space shuttle, and as a result the configurations included in the study were those most applicable to the space shuttle. The configurations included conventional delta wing aircraft as well as the X-15 and lifting body vehicles.

Weil, J.↗
NASA NTRS1988

Navier Stokes computation of the flow field over delta wings with spanwise leading edge blowing

The concept of spanwise leading edge blowing, a means of controlling the position and strength of leading edge vortices, is analyzed by numerical solutions of the three-dimensional Thin-Layer Navier Stokes equations. The leading edge jet is simulated by defining a permeable boundary, corresponding to the jet slot, where suitable boundary conditions are implemented. Numerical results agree favorably with experimental measurements. It is found that the use of spanwise leading edge blowing not only magnifies the size and strength of the leading edge vortices, but also moves the vortex cores outboard and upward. As a result, the increase in lift comes primarily from the greater nonlinear vortex lift. The presence of the leading edge jet stream displaces the flow outboard, thereby increasing the effective aspect ratio of the delta wing. However, blowing causes earlier vortex breakdown, thus decreasing the stall angle.

Yeh, David T.↗
NASA NTRS1991

Doppler Global Velocimeter Measurements of the Vortical Flow Above a Thin Delta Wing

A new measurement technique is being developed by NASA to measure off-surface flow fields. This method, Doppler global velocimetry, will allow quantification of complex three-dimensional flow fields at video camera rates. The entire flow field structure within a selected plane is measured simultaneously rather than by scanned, point-by-point measurements using conventional laser velocimetry. Data obtained using this technique will be used to correlate with other data sets for verification, and following verification, provide a quantified, highly detailed definition of the flow field. This will help to improve the understanding of fluid physics, supplement and broaden the database required to validate and refine computational fluid dynamics (CFD) models, and improve aircraft design methodology. To assess the capability of the technique, velocity measurements of the vortical flow field above a thin 75-degree delta wing were made in the NASA - Langley Basic Aerodynamics Research Tunnel. Preliminary comparisons of the results were made with similar measurements obtained using a three component laser velocimeter indicate that this technique is capable of describing the entire three - component velocity flow field simultaneously within a measurement plane in real time.

Usry, Jimmy W.↗
NASA NTRS1961

Transition of the Laminar Boundary Layer on a Delta Wing with 74 degree Sweep in Free Flight at Mach Numbers from 2.8 to 5.3

The tests were conducted at Mach numbers from 2.8 to 5.3, with model surface temperatures small compared to boundary-layer recovery temperature. The effects of Mach number, temperature ratio, unit Reynolds number, leading-edge diameter, and angle of attack were investigated in an exploratory fashion. The effect of heat-transfer condition (i.e., wall temperature to total temperature ratio) and Mach number can not be separated explicitly in free-flight tests. However, the data of the present report, as well as those of NACA TN 3473, were found to be more consistent when plotted versus temperature ratio. Decreasing temperature ratio increased the transition Reynolds number. The effect of unit Reynolds number was small as was the effect of leading-edge diameter within the range tested. At small values of angle of attack, transition moved forward on the windward surface and rearward on the leeward surface. This trend was reversed at high angles of attack (6 deg to 18 deg). Possible reasons for this are the reduction of crossflow on the windward side and the influence of the lifting vortices on the leeward surface. When the transition results on the 740 delta wing were compared to data at similar test conditions for an unswept leading edge, the results bore out the results of earlier research at nearly zero heat transfer; namely, sweep causes a large reduction in the transition Reynolds number.

Chapman, Gary T.↗
NASA NTRS1988

Modeling effects on the prediction of aerodynamic performance of a double-delta wing

A numerical investigation is undertaken of an 80/65-deg double-delta flat wing by means of the free vortex sheet method that views the vortex system on the leading edge in three different ways, in order to assess the effect of the model's type on the aerodynamic performance of the wing. The model employing two separate vortex systems, one each on inward and outward leading edges, yields predictions that are in close agreement with experimental data, although the model with single-vortex representation is adequate and requires less computational time.

Reddy, C. S.↗