Search NASA⌕ Search

SEARCH · Search NASA

Results for “Well clear”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Examining future changes in coastal low-level jet properties offshore California through dynamical downscaling

The coastal low-level jet, or coastal low-level jet (CLLJ), is a synoptically-forced meteorological feature frequently present offshore the western United States (U.S.). Characterized by a wind speed maximum that resides at the top of the marine boundary layer, the CLLJ is largely controlled by the location and strength of the North Pacific High (NPH) as well as the coastal geometry. Considering the rich wind resource available in this offshore region, the Bureau of Ocean Energy Management identified wind energy lease areas offshore California and supported the deployment of two U.S. Department of Energy wind lidar buoys near Morro Bay and Humboldt. Despite our relatively good understanding of the fundamental mechanisms responsible for large-scale CLLJ properties offshore the western U.S., future changes in CLLJ characteristics are less clear. To address this research challenge, and ultimately to better inform future wind turbine deployments, we use simulations driven by three global climate models (GCMs). We apply self-organizing maps to the model outputs for a historical and two future climate periods to show the range of NPH regimes that support CLLJ conditions during the warm seasons, as well as the subtle contribution from land-falling cyclones approaching the mainland during the cold seasons. Compared to the historical period, the three GCM-driven simulations agree that CLLJ conditions will become more (less) prevalent from central California northward (southward). They agree less with respect to future changes in maximum CLLJ wind speeds and CLLJ heights. However, after considering model biases present during the historical period, wind speeds between the models are actually more similar during the 2070–2095 period than during the historical period. The potential combination of more frequent CLLJ conditions characterized by relatively consistent wind speeds occurring at lower heights across northern California suggests that the Humboldt lease area may be ideal for a long-term wind turbine deployment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Valence-to-core X-ray emission spectroscopy of vanadium oxide and lithiated vanadyl phosphate materials

In this work, we report valence-to-core (VTC) X-ray emission spectroscopy (XES) measurements and theoretical calculations of the electrochemical sequence ε-VOPO 4 , ε-LiVOPO 4 , ε-Li 2 VOPO 4 and the reference oxides V 2 O 3 , VO 2 , and V 2 O 5 . In our analysis of these results, we establish a framework for interrogating chemical bonding that is generally applicable to a wide range of systems, including complex, extended inorganic compounds. While this latter regime has garnered less focused application than, e.g. , metalloenzymes in many excellent catalysis studies, we show that the technique provides high utility in materials-focused energy storage research. Here, sensitivities to the local atomic structure and hybridization schemes are discussed in detail. Similarly, the effect of lithiation on oxidation, delocalization, and shifts in ligand valence energy levels are all readily apparent in the analyzed results. Finally, the TDDFT projections clearly reveal the directional dependencies of the valence band at each of the vanadium sites. Our results demonstrate laboratory-based X-ray spectroscopy instrumentation is a viable route for attaining well-resolved VTC-XES features for inorganic compounds of 3d transition metals, even for samples of limited quantity or suffering from sensitivity to the atmosphere. The experimental results are in good agreement with results produced by real-space Green's function and time-dependent density functional theory (TDDFT) methods, respectively. Hence, we propose that VTC-XES, when equipped with appropriate theoretical support, can be a valuable complement to X-ray absorption pre-edge features for more detailed characterization of a compound's electronic structure. We expect similar analyses will find application in a broad range of materials chemistry research and provide both fundamental and applied insights.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The Concentration–Mass relation of massive, dynamically relaxed galaxy clusters: agreement between observations and ΛCDM simulations

ABSTRACT The relationship linking a galaxy cluster’s total mass with the concentration of its mass profile and its redshift is a fundamental prediction of the Cold Dark Matter (CDM) paradigm of cosmic structure formation. However, confronting those predictions with observations is complicated by the fact that simulated clusters are not representative of observed samples where detailed mass profile constraints are possible. In this work, we calculate the symmetry-peakiness-alignment (SPA) morphology metrics for maps of X-ray emissivity from the three hundred project hydrodynamical simulations of galaxy clusters at four redshifts, and thereby select a sample of morphologically relaxed, simulated clusters, using observational criteria. These clusters have on average earlier formation times than the full sample, confirming that they are both morphologically and dynamically more relaxed than typical. We constrain the concentration–mass–redshift relation of both the relaxed and complete sample of simulated clusters, assuming power-law dependences on mass (κm) and 1 + z (κζ), finding κm = −0.12 ± 0.07 and κζ = −0.27 ± 0.19 for the relaxed subsample. From an equivalently selected sample of massive, relaxed clusters observed with Chandra, we find κm = −0.12 ± 0.08 and κζ = −0.48 ± 0.19, in good agreement with the simulation predictions. The simulated and observed samples also agree well on the average concentration at a pivot mass and redshift providing further validation of the ΛCDM paradigm in the properties of the largest gravitationally collapsed structures observed. This also represents the first clear detection of decreasing concentration with redshift, a longstanding prediction of simulations in data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Use of Historical EM Practices and Policies for Management of Cleanup Program and Address GAO Concerns - 20222

As Department of Energy (DOE) Environmental Management (EM) program policies and management practices are revised over time, it might be useful to periodically reflect on the DOE EM program's past to identify practices that have worked and those that might be appropriate for possible reuse in the future. An added impetus to examine alternative approaches is the recent Government Accountability Office (GAO) report entitled 'Nuclear Waste Cleanup - DOE Could Improve Program and Project Management by Better Classifying Work and Following Leading Practices.' The February 2019 GAO report states that EM categorizes most of its work in a way that does not adequately involve independent experts and DOE senior leadership. It also noted that EM has not followed leading practices for program and project management that could help keep the cleanup efforts on schedule and control costs. The GAO report recommended that EM, working with DOE Office of Project Management (PM): - Establish requirements and then assess EM's ongoing operations activities to determine if some activities should be reclassified as capital asset projects based on these newly established requirements. - Review and revise EM's 2017 cleanup policy to include program management leading practices related to scope, cost, schedule performance, and independent reviews. - Update the cleanup policy to require that earned value management (EVM) systems be maintained and used in a way that follows EVM best practices. - Develop a policy to ensure that work is categorized as level of effort (LOE) only in appropriate, specified circumstances, such as when work is not measurable or when measurement is impractical. - Integrate EVM data into EM's performance metrics for operations activities. To assist with improving program performance and implementing audit recommendations, this paper reviewed past successful cleanups such as Weldon Springs, Rocky Flats, Fernald, Ashtabula, Battelle Columbus (abs, and other historical resources and people with experience during the early years of EM program. As such, there are several past practices which may well be suited for reuse today. Some of these practices include: - In 1990's, as the DOE EM cleanup program, known as Environmental Restoration came into effect, the known cleanup scope at each geographic location or site was organized into four levels ranging from overall site-wide cleanup effort to the individual 'release sites', providing high granularity to the program. - The cleanup program was organized by geography (Northwest, Southwest, Eastern Area Programs, etc.). These 'sub-program' managers provided a degree of Headquarters oversight and management allowing upper management (EM-1, 2, and 3) to focus on major decisions and issues. - Budget levels at selected cleanup sites were funded above 'minimum-safety' levels to accelerate actual cleanup work. - Past practice utilized EVM techniques and uniform EM oversight over all discrete project-like activities, providing for a coordinated cleanup effort. - EM managed LOE activities using benchmarking and best in class management practice techniques to help manage costs. - EM managed and reviewed entire site cleanup baselines, not only individual projects, focusing on a successful overall outcome. - Sites had a 'Road map' or 'Management Action Plan' that provided the overall strategy or plan for that site's cleanup - this helped with understanding and coordination of efforts. - EM had a robust lessons-learned program and database to capture and transmit worthy ideas. - EM had well-structured cleanup baseline change control policies to control cost and schedule changes, at the contractor and higher Headquarters levels. Finally, some of the GAO observations may be valid, however it is not clear as to their extent. For example, for some operation types of work, the use of the Level of Effort (LOE) earned value method to track progress may be appropriate. Also, to ensure independence of thought, and to obtain useful insight on past practices, it may be suitable to have former EM employees to assist with understanding past practices or to verify that activities have been properly identified. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Synthesis of historical reservoir operations from 1980 to 2020 for the evaluation of reservoir representation in large-scale hydrologic models

Abstract. All the major river systems in the contiguous United States (CONUS) (and many in the world) are impacted by dams, yet reservoir operations remain difficult to quantify and model due to a lack of data. Reservoir operation data are often inaccessible or distributed across many local operating agencies, making the acquisition and processing of data records quite time-consuming. As a result, large-scale models often rely on simple parameterizations for assumed reservoir operations and have a very limited ability to evaluate how well these approaches match actual historical operations. Here, we use the first national dataset of historical reservoir operations in the CONUS domain, ResOpsUS, to analyze reservoir storage trends and operations in more than 600 major reservoirs across the US. Our results show clear regional differences in reservoir operations. In the eastern US, which is dominated by flood control storage, we see storage peaks in the winter months with sharper decreases in the operational range (i.e., the difference between monthly maximum and minimum storage) in the summer. In the more arid western US where storage is predominantly for irrigation, we find that storage peaks during the spring and summer with increases in the operational range during the summer months. The Lower Colorado region is an outlier because its seasonal storage dynamics more closely mirrored those of flood control basins, yet the region is classified as arid, and most reservoirs have irrigation uses. Consistent with previous studies, we show that average annual reservoir storage has decreased over the past 40 years, although our analyses show a much smaller decrease than previous work. The reservoir operation characterizations presented here can be used directly for development or evaluation of reservoir operations and their derived parameters in large-scale models. We also evaluate how well historical operations match common assumptions that are often applied in large-scale reservoir parameterizations. For example, we find that 100 dams have maximum storage values greater than the reported reservoir capacity from the Global Reservoirs and Dams database (GRanD). Finally, we show that operational ranges have been increasing over time in more arid regions and decreasing in more humid regions, pointing to the need for operating policies which are not solely based on static values.

Geology↗
DOE OSTI2024

RrA, an enzyme from Rhodospirillum rubrum , is a prototype of a new family of short‐chain L‐asparaginases

Abstract L‐Asparaginases (ASNases) catalyze the hydrolysis of L‐Asn to L‐Asp and ammonia. Members of the ASNase family are used as drugs in the treatment of leukemia, as well as in the food industry. The protomers of bacterial ASNases typically contain 300–400 amino acids (typical class 1 ASNases). In contrast, the chain of ASNase from Rhodospirillum rubrum , reported here and referred to as RrA, consists of only 172 amino acid residues. RrA is homologous to the N‐terminal domain of typical bacterial class 1 ASNases and exhibits millimolar affinity for L‐Asn. In this study, we demonstrate that RrA belongs to a unique family of cytoplasmic, short‐chain ASNases (scASNases). These proteins occupy a distinct region in the sequence space, separate from the regions typically assigned to class 1 ASNases. The scASNases are present in approximately 7% of eubacterial species, spanning diverse bacterial lineages. They seem to be significantly enriched in species that encode for more than one class 1 ASNase. Here, we report biochemical, biophysical, and structural properties of RrA, a member of scASNases family. Crystal structures of the wild‐type RrA, both with and without bound L‐Asp, as well as structures of several RrA mutants, reveal topologically unique tetramers. Moreover, the active site of one protomer is complemented by two residues (Tyr21 and Asn26) from another protomer. Upon closer inspection, these findings clearly outline scASNases as a stand‐alone subfamily of ASNases that can catalyze the hydrolysis of L‐Asn to L‐Asp despite the lack of the C‐terminal domain that is present in all ASNases described structurally to date.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Size-dependent stochastic tensile properties in additively manufactured 316L stainless steel

Recent work in metal additive manufacturing (AM) suggests that mechanical properties may vary with feature size; however, these studies do not provide a statistically robust description of this phenomenon, nor do they provide a clear causal mechanism. Because of the huge design freedom afforded by 3D printing, AM parts typically contain a range of feature sizes, with particular interest in smaller features, so the size effect must be well understood in order to make informed design decisions. This work investigates the effect of feature size on the stochastic mechanical performance of laser powder bed fusion tensile specimens. A high-throughput tensile testing method was used to characterize the effect of specimen size on strength, elastic modulus and elongation in a statistically meaningful way. The effective yield strength, ultimate tensile strength and modulus decreased strongly with decreasing specimen size: all three properties were reduced by nearly a factor of two as feature dimensions were scaled down from 6.25 mm to 0.4 mm. Hardness and microstructural observations indicate that this size dependence was not due to an intrinsic change in material properties, but instead the effects of surface roughness on the geometry of the specimens. Finite element analysis using explicit representations of surface topography shows the critical role surface features play in creating stress concentrations that trigger deformation and subsequent fracture. The experimental and finite element results provide the tools needed to make corrections in the design process to more accurately predict the performance of AM components.

316L stainless steel↗
DOE OSTI2025

The state of the art for neutron irradiation experiments from the perspective of the High Flux Isotope Reactor (HFIR)

Irradiation experiment campaigns are critical to advancing nuclear energy technologies by providing data on material performance under relevant radiation conditions. Successful irradiation experiments require integrated design efforts that balance technical goals with facility constraints. Here, this paper presents an expert-informed overview of irradiation experiment design at the High Flux Isotope Reactor. It addresses the nuclear materials research and irradiation experiment communities to guide them toward developing technically sound, facility-compatible campaigns. The High Flux Isotope Reactor is a multipurpose reactor supporting isotope production, neutron scattering, and materials testing. Its high, steady-state neutron flux is ideal for irradiation experiments, but successful execution demands coordinated thermal, structural, and reactor physics analyses. The paper outlines the complete development workflow from concept definition and design optimization to safety qualification and post-irradiation examination. Standardized capsule platforms are also discussed in terms of flexibility, specimen capacity, and thermal performance. Common failure modes such as unanticipated geometric variations, can impact temperature-dose profiles and compromise data reliability. Therefore, detailed thermal modeling and accurate as-built characterization are essential for meaningful post-irradiation data interpretation. Key recommendations include early engagement all stakeholders, clearly defined design expectations, and alignment of specimen geometries with post-irradiation examination capabilities. This approach reduces design iterations, enhances data quality, and supports more efficient use of irradiation resources. Strategic and well-planned irradiation testing not only improves individual campaign success but also accelerates the deployment of advanced nuclear technologies. By closing critical data gaps and reducing development risks, the nuclear materials community can more effectively contribute to the future of clean, resilient energy systems.

Experiments↗
DOE OSTI2020

Relationships Between Precipitation Properties and Large-Scale Conditions During Subsidence at the Eastern North Atlantic Observatory

Three years of reanalysis and ground-based observations collected at the Eastern North Atlantic (ENA) observatory are analyzed to document the properties of rain and boundary layer clouds, and their relationship with the large-scale environment during general subsidence conditions and following cold front passages. Clouds in the wake of cold fronts exhibit on average a 10% higher propensity to precipitate and higher rain-to-cloud fraction than cloud found in general subsidence conditions. Similarities in the seasonal cycle of rain and of large-scale properties suggest that the large-scale conditions created by the cold front passage are responsible for the unique properties of the rain forming in its wake. The identification of monotonic relationships between rain-to-cloud fraction and rain rate with surface forcing and boundary layer stability parameters as well as between virga base height with stability and humidity measures further supports that large-scale conditions impact precipitation variability. Likewise, these relationships between the large-scale and rain properties are less clear than those established between cloud and rain properties suggesting that cloud macrophysics have a more direct impact on the properties of rain than the large-scale environment. The applicability of previously documented relationships between rain properties and cloud thickness is tested and the relationships adjusted to accommodate the complex shallow clouds and melting precipitation observed to occur in the ENA region. Furthermore, establishing these relationships opens up opportunities for parametrization development and suggest that a realistic representation of precipitation properties in models relies on the accurate representation of both clouds and the large-scale environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Universal fluctuating regime in triangular chromate antiferromagnets

In this work, we report x-ray diffraction, magnetic susceptibility, heat capacity, 1 H nuclear magnetic resonance (NMR), and muon spin relaxation (μSR) measurements, as well as density-functional band-structure calculations for the frustrated S=3/2 triangular lattice Heisenberg antiferromagnet (TLHAF) α-HCrO 2 (trigonal, space group: $R\bar{3}m$). This compound undergoes a clear magnetic transition at T N ≃22.5 K, as seen from the drop in the muon paramagnetic fraction and concurrent anomalies in the magnetic susceptibility and specific heat capacity. Local probes (NMR and μSR) reveal a broad regime with slow fluctuations down to 0.7T N , this temperature corresponding to the maximum in the μSR relaxation rate and in the NMR wipe-out. From the comparison with NaCrO 2 and α-KCrO 2 , the fluctuating regime and slow dynamics below T N appear to be hallmarks of the TLHAF with ABC stacking. We discuss the role of interlayer frustration, which may have impacted recent spin-liquid candidates with triangular geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

The rapid-tome, a 3D-printed microtome, and an updated hand-sectioning method for high-quality plant sectioning

Abstract Background Microscopic analysis of plant anatomy is a common procedure in biology to study structure and function that requires high-quality sections for accurate measurements. Hand sectioning of specimens is typically limited to moderately soft tissue while harder samples prohibit sectioning by hand and/or result in inconsistent thicknesses. Results Here we present both a clearly described hand-sectioning method and a novel microtome design that together provide the means to section a variety of plant sample types. The described hand-sectioning method for herbaceous stems works well for softer subjects but is less suitable for samples with secondary growth (e.g., wood production). Instead, the “Rapid-Tome” is a novel tool for sectioning both soft and tougher high-aspect-ratio samples, such as stems and roots, with excellent sample control. The Rapid-Tome can be 3D-printed in approximately 18 h on a mid-quality printer common at university maker spaces. After printing and trimming, Rapid-Tome assembly takes a few minutes with five metal parts common at hardware stores. Users sectioned a variety of plant samples including the hollow internodes of switchgrass ( Panicum virgatum ), fibrous switchgrass roots containing aerenchyma, and woody branches of eastern red cedar ( Juniperus virginiana ) and American sycamore ( Platanus occidentalis ). A comparative analyses with Rapid-Tome-produced sections readily revealed a significant difference in seasonal growth of sycamore xylem vessel area in spring (49%) vs. summer (23%). Additionally, high school students with no prior experience produced sections with the Rapid-Tome adequate for comparative analyses of various plant samples in less than an hour. Conclusions The described hand-sectioning method is suitable for softer tissues, including hollow-stemmed grasses and similar samples. In addition, the Rapid-Tome provides capacity to safely produce high-quality sections of tougher plant materials at a fraction of the cost of traditional microtomes combined with excellent sample control. The Rapid-Tome features rapid sectioning, sample advancement, blade changes, and sample changes; it is highly portable and can be used easily with minimal training making production of thin sections accessible for classroom and outreach use, in addition to research.

3D-printing↗
DOE OSTI2021

Evaluating Effects of Shear Processing on 2D Crystalline Materials in 3D Metal Matrices: Atomistic Understanding of High Shear Deformation of Copper Graphene Composites

Composites made of copper and graphene demonstrate high strength, lubricity and enhanced electrical and thermal conductivity compared pure copper. However, manufacturing these composites at bulk volumes for industrial applications has been a big challenge. Shear deformation assisted processing is an effective method for manufacturing materials such as copper-graphene composites demonstrating ultra-fine grain structures and compositional homogeneity. Nevertheless, microstructural evolution of the composites and their property development under such conditions is not clearly understood currently. To rectify this gap in literature, high strain shear deformation of copper coated graphene foils was performed using a tribometer pin in this study. Changes in microstructure of the composite as well as the constituent components under shear deformation was correlated to process conditions. A sharp increase in the coefficient of friction attributed to rupture and smearing of graphene layer into copper substrate was observed during the shear processing. The coefficient of friction of the sheared copper/graphene composite was lower than that of pure copper, suggesting that partially worn graphene is effectively lubricious at the macroscale. A multimodal characterization of the processed region further revealed a shear deformation-induced ultrafine two-phase grain-structure consisting of copper and graphitic domains. Shear deformation reduced the copper grain size from around 50 – 100 µm to ~200 nm on an average and ~2 – 5 nm in some locations. The semicrystalline graphene films were observed to fracture into 10 – 50 µm size flakes. Oxygen enrichment was observed in the processed region. Finally, graphitic domain were identified for the first time in the copper matrix and not just at the grain boundaries providing evidence for a metastable composite microstructure as a result of solid phase processing at room temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Systematic Validation of Ensemble Cloud-Process Simulations using Polarimetric Radar Observations and Simulator over the NASA Wallops Flight Facility

The BiLateral Operational Storm-Scale Observation and Modeling (BLOSSOM) project was initiated to establish a long-term supersite to improve understanding of cloud physical states and processes as well as to support satellite and climate model programs over the WFF site via a bilateral approach of storm-scale observations and process modeling. This study highlights a noble systematic validation framework of the BLOSSOM ensemble cloud-process simulations through mixed-phase, light-rain, and deep-convective precipitation cases. The framework consists of creating a domain-shifted ensemble of large-scale forcing datasets, and configuring and performing cloud-process simulations with three different bulk microphysics schemes. Validation uses NASA S-band dual-POLarimetric radar (NPOL) observations in the form of statistical composites and skill scores via a polarimetric radar simulator and newly developed CfRad Data tool (CfRAD). While the simulations capture the overall structures of the reflectivity composites, polarimetric signals are still poorly simulated, mainly due to a lack of representation of ice microphysics diversity in shapes, orientation distributions, and their complex mixtures. Despite the limitation, this new ensemble-based validation framework demonstrates that 1) no particular forcing or microphysics scheme outperforms the rest and 2) the skill scores of coarse- and fine-resolution ensemble simulations with different domain-shifted forcing and microphysics schemes are highly correlated with each other with no clear improvement. On the other hand, this suggests that coarse-resolution ensemble simulations are relevant for selecting the best meteorological forcing and microphysics scheme before conducting computationally demanding large eddy simulations (LESs) in support of aircraft and satellite instrument development as well as cloud-precipitation-convection parameterizations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Magnetoelastic transition and magnetocaloric effect in induction melted Fe 100-x Rh x bulk alloys with x = 50, 51

Magnetoelastic transitions (METs) in bulk in nearly equiatomic Fe-Rh alloys produced by arc melting may show poor reproducibility related to insufficient chemical homogeneity and presence of impurity phases in variable concentrations. To better understand the synthesis conditions that reliably yield bulk FeRh materials with reproducible MET characteristics, Fe 100-x Rh x alloys with x = 50, 50.5 and 51 at. % were prepared by induction melting and thermal annealing under identical conditions. The fabricated samples were cut into several slices, followed by characterization of METs in each of the slices using isothermal and isofield magnetization measurements, differential scanning calorimetry, and direct measurements of the magnetocaloric effect. All of the slices exhibit METs between the AFM and FM states, but the transitions are abrupt with nearly the same change of magnetization, ΔM, when x = 50.5 and 51, whereas for the x = 50 alloy the transition spreads over a wide temperature interval and ΔM may fluctuate by as much as 10 % from one specimen to another. A comparison of the magnetocaloric responses of x = 50 and 51 materials is presented. The clearly different effect of the magnetic field on the transition in both directions leads to significant differences in the reversibility and maximum values of the magnetic field-induced entropy and adiabatic temperature changes, as well as average hysteresis losses. In terms of reproducibility, our results suggest that induction melting is a more appropriate technique to prepare these binary alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hidden deep in the halo: selection of a reduced proper motion halo catalogue and mining retrograde streams in the velocity space

ABSTRACT The Milky Way halo is one of the few galactic haloes that provides a unique insight into galaxy formation by resolved stellar populations. Here, we present a catalogue of ∼47 million halo stars selected independent of parallax and line-of-sight velocities, using a combination of Gaia DR3 proper motion and photometry by means of their reduced proper motion. We select high tangential velocity (halo) main sequence stars and fit distances to them using their simple colour-absolute-magnitude relation. This sample reaches out to ∼21 kpc with a median distance of 6.6 kpc thereby probing much further out than would be possible using reliable Gaia parallaxes. The typical uncertainty in their distances is $0.57_{-0.26}^{+0.56}$ kpc. Using the colour range 0.45 < (G0 − GRP, 0) < 0.715, where the main sequence is narrower, gives an even better accuracy down to $0.39_{-0.12}^{+0.18}$ kpc in distance. The median velocity uncertainty for stars within this colour range is 15.5 km s−1. The distribution of these sources in the sky, together with their tangential component velocities, are very well-suited to study retrograde substructures. We explore the selection of two complex retrograde streams: GD-1 and Jhelum. For these streams, we resolve the gaps, wiggles and density breaks reported in the literature more clearly. We also illustrate the effect of the kinematic selection bias towards high proper motion stars and incompleteness at larger distances due to Gaia’s scanning law. These examples showcase how the full RPM catalogue made available here can help us paint a more detailed picture of the build-up of the Milky Way halo.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Bardeen-Cooper-Schrieffer pairing of composite fermions

Topological pairing of composite fermions has led to remarkable ideas, such as excitations obeying non-Abelian braid statistics and topological quantum computation. Here, we construct a p-wave paired Bardeen-Cooper-Schrieffer (BCS) wave function for composite fermions in the torus geometry, which is a convenient geometry for formulating momentum space pairing as well as for revealing the underlying composite-fermion Fermi sea. Following the standard BCS approach, we minimize the Coulomb interaction energy at half filling in the lowest and the second Landau levels, which correspond to filling factors ν = 1/2 and ν = 5/2 in GaAs quantum wells, by optimizing two variational parameters that are analogous to the gap and the Debye cut-off energy of the BCS theory. Our results show no evidence for pairing at ν = 1/2 but a clear evidence for pairing at ν = 5/2. To a good approximation, the highest overlap between the exact Coulomb ground state at ν = 5/2 and the BCS state is obtained for parameters that minimize the energy of the latter, thereby providing support for the physics of composite-fermion pairing as the mechanism for the 5/2 fractional quantum Hall effect. We discuss the issue of modular covariance of the composite-fermion BCS wave function, and calculate its Hall viscosity and pair correlation function. By similar methods, we look for but do not find an instability to s-wave pairing for a spin-singlet composite-fermion Fermi sea at half-filled lowest Landau level in a system where the Zeeman splitting has been set to zero.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Synthesis Roadmap for Actinide Chloride Salts

Molten salt reactors (MSRs) are among the main advanced nuclear reactor types at the forefront of development by industry, with the support of the US government, for the next fleet of nuclear reactors to support the demand for energy in the coming decades. MSRs are highly unique because they are cooled and typically also fueled by molten salt. This quality brings about safety benefits such as low-pressure operation and self-stabilization of the neutron flux, operational benefits such as high-temperature operation and the ability for online refueling, and fuel and waste management benefits thanks to the flexibility of post-processing of molten salts and reprocessing options that involve removal of fission products and actinide separation. In fact, domestic deployment of molten salt (or molten salt–cooled) reactors is an approaching reality: a handful of molten salt reactor developers are planning to operate demonstration-scale reactors, as a step toward commercial-scale power reactors, within the decade. For example, Natura Resources received a construction permit in September 2024 for the deployment of MSR-1, which is a graphite-moderated thermal spectrum reactor, at Abilene Christian University. Also, TerraPower, in a collaborative effort with Southern Company and Idaho National Laboratory (INL), received approval from DOE in 2023 to proceed with the construction of the Molten Chloride Reactor Experiment (MCRE), a homogeneous chloride fast reactor at INL, and has begun assembly of system components. There are several other examples of developers at different stages of development of their own unique MSR designs (Jenet et al., 2025). As developers are in the process of obtaining approvals for their designs, deploying demonstration-scale reactors, and planning for their commercial-scale power reactors, there is a critical supply chain need for the synthesis of fuel for these reactors that must be addressed. The challenge generally is three-fold: (1) the quantity of fueled salt needed for these reactors is extraordinarily high (>100s of kilograms), but demonstrations of scaled-up techniques for fueled salt synthesis are significantly more limited than demonstrations of lab-scale syntheses; (2) each developer has a unique reactor design, which means different actinide halide elements in different carrier salts must be synthesized; and (3) there is a need for particularly high-purity salt so as to ensure the long-term operability of these reactors with minimal degradation to salt-wetted components, which necessitates synthesis techniques with high levels of quality control, repeatability, and well-characterized precursor and reactant materials. It is crucial that this supply chain challenge be addressed by demonstrating synthesis techniques that are scalable, de-risked, and well-documented so that these technologies may be adopted and utilized by industry to support the fueling needs of MSRs that are to come online within the next 10 years. With this supply chain challenge clearly defined for the developing MSR industry, it is important to consider that addressing such a challenge is oftentimes complex and context-dependent. There is not necessarily a single synthesis technique that can be scaled up and adopted to address the needs of all MSR developers; the synthesis approach that may be viable for producing a desired fuel salt will be entirely dependent on the exact salt composition needed, the quantity needed, purity needed, the refueling and waste plans, and the availability of a carrier salt for the fuel. Therefore, it is important to consider more broadly what synthesis techniques are available and have been demonstrated to understand the benefits, challenges, and general nuances that should be considered when evaluating a particular route for efficient production of high-purity fuel salts at scale.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Diversifying and perennializing plants in agroecosystems alters retention of new C and N from crop residues

Abstract Managing soils to retain new plant inputs is key to moving toward a sustainable and regenerative agriculture. Management practices, like diversifying and perennializing agroecosystems, may affect the decomposer organisms that regulate how new residue is converted to persistent soil organic matter. Here we tested whether 12 years of diversifying/perennializing plants in agroecosystems through extended rotations or grassland restoration would decrease losses of new plant residue inputs and, thus, increase retention of carbon (C) and nitrogen (N) in soil. We tracked dual‐labeled ( 13 C and 15 N), isotopically enriched wheat ( Triticum aestivum ) residue in situ for 2 years as it decomposed in three agroecosystems: maize–soybean (CS) rotation, maize–soybean–wheat plus red clover and cereal rye cover crops (CSW2), and spring fallow management with regeneration of natural grassland species (seven to 10 species; SF). We measured losses of wheat residue (C wheat and N wheat ) in leached soil solution and greenhouse gas fluxes, as well as how much was recovered in microbial biomass and bulk soil at 5‐cm increments down to 20 cm. CSW2 and SF both had unique, significant effects on residue decomposition and retention dynamics that were clear only when using nuanced metrics that able to tease apart subtle differences. For example, SF retained a greater portion of C wheat in 0–5 cm surface soils (155%, p = 0.035) and narrowed the C wheat to N wheat ratio ( p < 0.030) compared to CS. CSW2 increased an index of carbon‐retention efficiency, C wheat retained in the mesocosm divided by total measured, from 0.18 to 0.27 (49%, p = 0.001), compared to CS. Overall, we found that diversifying and extending the duration of living plants in agroecosystems can lead to greater retention of new residue inputs in subtle ways that require further investigation to fully understand.

McDaniel, Marshall D.↗