Search NASA⌕ Search

SEARCH · Search NASA

Results for “aerodynamic optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Three-dimensional canard-wing shape optimization in aircraft cruise and maneuver environments

This paper demonstrates a numerical technique for canard-wing shape optimization at two operating conditions. For purposes of simplicity, a mean surface wing paneling code is employed for the aerodynamic calculations. The optimization procedures are based on the method of feasible directions. The shape functions for describing the thickness, camber, and twist are based on polynomial representations. The primary design requirements imposed restrictions on the canard and wing volumes and on the lift coefficients at the operating conditions. Results indicate that significant improvements in minimum drag and lift-to-drag ratio are possible with reasonable aircraft geometries. Calculations were done for supersonic speeds with Mach numbers ranging from 1 to 6. Planforms were mainly of a delta shape with aspect ratio of 1.

De Silva, B. M. E.↗

Optimized Off-Design Performance of Flexible Wings with Continuous Trailing-Edge Flaps

This work assesses the potential aerodynamic performance benefits of a variable-camber, continuous-trailing-edge flap system on a generic transport aircraft at off-design conditions. A process to optimize transport wings while addressing static aeroelastic effects is presented. To establish a proper baseline, a transport wing is first aerodynamically optimized at a mid-cruise flight condition using an inviscid, aeroelastic analysis tool. The optimized wing is then analyzed at off-design cruise conditions. The optimization is repeated at these off-design conditions to determine how much performance is lost by the wing optimized solely for the mid-cruise condition. The full-span flap system is then adapted to improve performance of the mid-cruise-optimized wing at these off-design conditions. The measured improvement is quantified by a comparison with wings designed specifically for the off-design conditions. To evaluate the effects of aeroelasticity on the effectiveness of the flap system, this entire process is performed on both a conventionally stiff wing and a modern, more flexible wing. The results indicate that the flap system allows for recovery of near-optimal performance throughout cruise. The flap system is found to be advantageous even for modern wings with increased flexibility.

Rodriguez, David L.↗

Numerical optimization - An assessment of its role in transport aircraft aerodynamic design through a case study

An efficient transonic wing design procedure based upon numerical optimization together with three-dimensional transonic methods has been developed and used to design an advanced transport wing. The method development included an examination of the use of both full potential and extended small disturbance analysis codes and demonstrated that the former formulation was more reliable. In either case, the design procedure is economical and easy to use. Design verification in a unique semi-span test arrangement demonstrated that the design method produced a wing which satisfied the study design requirements. However, aeroelastic deformation of the wing occurred during the wind tunnel test. The computational methods used in the design procedure were employed to assess the effect of the aeroelastic deformation. The paper concludes with an evaluation of the design procedure and recommendation for its improvement.

Lores, M. E.↗

Design efficiency evaluation for transonic airfoil optimization - A case for Navier-Stokes design

A constrained-optimization design method which improves the aerodynamic performance of transonic airfoils is evaluated from a design-quality and design-efficiency viewpoint. Design efficiency is a measure of the performance improvement and the design time (CPU time). Total-airfoil design and upper-surface design are performed using the Euler and Navier-Stokes equations with several grids, and are evaluated using the Navier-Stokes equations to determine the anticipated physical design response. Even though the cost of the Euler design is lower than Navier-Stokes design, the Navier-Stokes evaluation indicates that the Euler design does not necessarily improve the aerodynamic performance. Therefore, the design optimization should be based on an accurate flow simulation to achieve an actual performance improvement, and the design time is a secondary concern.

Hager, J. O.↗

Flight Test Validation of Optimal Input Design and Comparison to Conventional Inputs

A technique for designing optimal inputs for aerodynamic parameter estimation was flight tested on the F-18 High Angle of Attack Research Vehicle (HARV). Model parameter accuracies calculated from flight test data were compared on an equal basis for optimal input designs and conventional inputs at the same flight condition. In spite of errors in the a priori input design models and distortions of the input form by the feedback control system, the optimal inputs increased estimated parameter accuracies compared to conventional 3-2-1-1 and doublet inputs. In addition, the tests using optimal input designs demonstrated enhanced design flexibility, allowing the optimal input design technique to use a larger input amplitude to achieve further increases in estimated parameter accuracy without departing from the desired flight test condition. This work validated the analysis used to develop the optimal input designs, and demonstrated the feasibility and practical utility of the optimal input design technique.

Morelli, Eugene A.↗

Control and Simulation of a Deployable Entry Vehicle with Aerodynamic Control Surfaces

In this paper, we investigate the static stability of a deployable entry vehicle called the Lifting Nano-ADEPT and design a control system to follow bank angle, angle-of-attack, and sideslip guidance commands. The control design, based on linear quadratic regulator optimal techniques, utilizes aerodynamic control surfaces to track angle-of-attack, sideslip angle, and bank angle commands. We demonstrate, using a nonlinear simulation environment, that the controller is able to accurately track step commands that may come from a guidance algorithm.

Margolis, Benjamin W. L.↗

Multilevel decomposition approach to integrated aerodynamic/dynamic/structural optimization of helicopter rotor blades

This paper describes an integrated aerodynamic, dynamic, and structural (IADS) optimization procedure for helicopter rotor blades. The procedure combines performance, dynamics, and structural analyses with a general purpose optimizer using multilevel decomposition techniques. At the upper level, the structure is defined in terms of local quantities (stiffnesses, mass, and average strains). At the lower level, the structure is defined in terms of local quantities (detailed dimensions of the blade structure and stresses). The IADS procedure provides an optimization technique that is compatible with industrial design practices in which the aerodynamic and dynamic design is performed at a global level and the structural design is carried out at a detailed level with considerable dialogue and compromise among the aerodynamic, dynamic, and structural groups. The IADS procedure is demonstrated for several cases.

Walsh, Joanne L.↗

An inverse method for computation of structural stiffness distributions of aeroelastically optimized wings

An inverse method has been developed to compute the structural stiffness properties of wings given a specified wing loading and aeroelastic twist distribution. The method directly solves for the bending and torsional stiffness distribution of the wing using a modal representation of these properties. An aeroelastic design problem involving the use of a computational aerodynamics method to optimize the aeroelastic twist distribution of a tighter wing operating at maneuver flight conditions is used to demonstrate the application of the method. This exercise verifies the ability of the inverse scheme to accurately compute the structural stiffness distribution required to generate a specific aeroelastic twist under a specified aeroelastic load.

Schuster, David M.↗

Towards Low-Noise Design of a Proprotor with the Vortex Lattice Method and Gradient-Based Optimization

This work aims to combine an aerodynamic model based on the unsteady vortex lattice method with an acoustic model provided by Farassat's formulation 1A to perform gradient-based optimizations of a proprotor with aerodynamic and acoustic constraints. The resulting combination of tools is applied to the problem of designing a single proprotor operating at a cruise condition, with and without an acoustic constraint and wing placed downstream of the proprotor rotation plane. Results are compared to a baseline design studied previously, and to similar optimizations performed with a simpler blade element momentum theory aerodynamic model. Each optimization case achieved feasibility and made significant improvements in the objective function, but the optimality criterion was not satisfied. Overall the designs the optimizer found roughly comported with our previous experience with similar problems, with some discrepancies that are discussed.

Aerodynamics↗

Towards Low-Noise Design of a Proprotor with the Vortex Lattice Method and Gradient-Based Optimization

This work aims to combine an aerodynamic model based on the unsteady vortex lattice method with an acoustic model provided by Farassat's formulation 1A to perform gradient-based optimizations of a proprotor with aerodynamic and acoustic constraints. The resulting combination of tools is applied to the problem of designing a single proprotor operating at a cruise condition, with and without an acoustic constraint and wing placed downstream of the proprotor rotation plane. Results are compared to a baseline design studied previously, and to similar optimizations performed with a simpler blade element momentum theory aerodynamic model. Each optimization case achieved feasibility and made significant improvements in the objective function, but the optimality criterion was not satisfied. Overall the designs the optimizer found roughly comported with our previous experience with similar problems, with some discrepancies that are discussed.

Aerodynamics↗

Aircraft concept optimization using the global sensitivity approach and parametric multiobjective figures of merit

An extension of our parametric multidisciplinary optimization method to include design results connecting multiple objective functions is presented. New insight into the effect of the figure of merit (objective function) on aircraft configuration size and shape is demonstrated using this technique. An aircraft concept, subject to performance and aerodynamic constraints, is optimized using the global sensitivity equation method for a wide range of objective functions. These figures of merit are described parametrically such that a series of multiobjective optimal solutions can be obtained. Computational speed is facilitated by use of algebraic representations of the system technologies. Using this method, the evolution of an optimum design from one objective function to another is demonstrated. Specifically, combinations of minimum takeoff gross weight, fuel weight, and maximum cruise performance and productivity parameters are used as objective functions.

Malone, Brett↗

Automation of reverse engineering process in aircraft modeling and related optimization problems

During the year of 1994, the engineering problems in aircraft modeling were studied. The initial concern was to obtain a surface model with desirable geometric characteristics. Much of the effort during the first half of the year was to find an efficient way of solving a computationally difficult optimization model. Since the smoothing technique in the proposal 'Surface Modeling and Optimization Studies of Aerodynamic Configurations' requires solutions of a sequence of large-scale quadratic programming problems, it is important to design algorithms that can solve each quadratic program in a few interactions. This research led to three papers by Dr. W. Li, which were submitted to SIAM Journal on Optimization and Mathematical Programming. Two of these papers have been accepted for publication. Even though significant progress has been made during this phase of research and computation times was reduced from 30 min. to 2 min. for a sample problem, it was not good enough for on-line processing of digitized data points. After discussion with Dr. Robert E. Smith Jr., it was decided not to enforce shape constraints in order in order to simplify the model. As a consequence, P. Dierckx's nonparametric spline fitting approach was adopted, where one has only one control parameter for the fitting process - the error tolerance. At the same time the surface modeling software developed by Imageware was tested. Research indicated a substantially improved fitting of digitalized data points can be achieved if a proper parameterization of the spline surface is chosen. A winning strategy is to incorporate Dierckx's surface fitting with a natural parameterization for aircraft parts. The report consists of 4 chapters. Chapter 1 provides an overview of reverse engineering related to aircraft modeling and some preliminary findings of the effort in the second half of the year. Chapters 2-4 are the research results by Dr. W. Li on penalty functions and conjugate gradient methods for quadratic programming problems.

Li, W.↗

MyCrunchGPT: A LLM Assisted Framework for Scientific Machine Learning

Scientific machine learning (SciML) has advanced recently across many different areas in computational science and engineering. Here, the objective is to integrate data and physics seamlessly without the need of employing elaborate and computationally taxing data assimilation schemes. However, preprocessing, problem formulation, code generation, postprocessing, and analysis are still time- consuming and may prevent SciML from wide applicability in industrial applications and in digital twin frameworks. Here, we integrate the various stages of SciML under the umbrella of ChatGPT, to formulate MyCrunchGPT, which plays the role of a conductor orchestrating the entire workflow of SciML based on simple prompts by the user. Specifically, we present two examples that demonstrate the potential use of MyCrunchGPT in optimizing airfoils in aerodynamics, and in obtaining flow fields in various geometries in interactive mode, with emphasis on the validation stage. To demonstrate the flow of the MyCrunchGPT, and create an infrastructure that can facilitate a broader vision, we built a web app based guided user interface, that includes options for a comprehensive summary report. The overall objective is to extend MyCrunchGPT to handle diverse problems in computational mechanics, design, optimization and controls, and general scientific computing tasks involved in SciML, hence using it as a research assistant tool but also as an educational tool. While here the examples focus on fluid mechanics, future versions will target solid mechanics and materials science, geophysics, systems biology, and bioinformatics.

97 MATHEMATICS AND COMPUTING↗

Transonic airfoil design for helicopter rotor applications

Despite the fact that the flow over a rotor blade is strongly influenced by locally three-dimensional and unsteady effects, practical experience has always demonstrated that substantial improvements in the aerodynamic performance can be gained by improving the steady two-dimensional charateristics of the airfoil(s) employed. The two phenomena known to have great impact on the overall rotor performance are: (1) retreating blade stall with the associated large pressure drag, and (2) compressibility effects on the advancing blade leading to shock formation and the associated wave drag and boundary-layer separation losses. It was concluded that: optimization routines are a powerful tool for finding solutions to multiple design point problems; the optimization process must be guided by the judicious choice of geometric and aerodynamic constraints; optimization routines should be appropriately coupled to viscous, not inviscid, transonic flow solvers; hybrid design procedures in conjunction with optimization routines represent the most efficient approach for rotor airfroil design; unsteady effects resulting in the delay of lift and moment stall should be modeled using simple empirical relations; and inflight optimization of aerodynamic loads (e.g., use of variable rate blowing, flaps, etc.) can satisfy any number of requirements at design and off-design conditions.

Hassan, Ahmed A.↗

Unsteady Adjoint of Pressure Loss for a Fundamental Transonic Turbine Vane

High-fidelity simulations, e.g., large eddy simulation (LES), are often needed for accurately predicting pressure losses due to wake mixing and boundary layer development in turbomachinery applications. An unsteady adjoint of high-fidelity simulations is useful for design optimization in such aerodynamic applications. In this paper, we present unsteady adjoint solutions using a large eddy simulation model for an inlet guide vane from von Karman Institute (VKI) using aerothermal objectives. The unsteady adjoint method is effective in capturing the gradient for a short time interval aerothermal objective, whereas the method provides diverging gradients for long time-averaged thermal objectives. As the boundary layer on the suction side near the trailing edge of the vane is turbulent, it poses a challenge for the adjoint solver. The chaotic dynamics cause the adjoint solution to diverge exponentially from the trailing edge region when solved backward in time. This results in the corruption of the sensitivities obtained from the adjoint solutions. An energy analysis of the unsteady compressible Navier–Stokes adjoint equations indicates that adding artificial viscosity to the adjoint equations can dissipate the adjoint energy while potentially maintaining the accuracy of the adjoint sensitivities. Analyzing the growth term of the adjoint energy provides a metric for identifying the regions in the flow where the adjoint term is diverging. Results for the vane obtained from simulations performed on the Titan supercomputer are demonstrated.

Engineering↗

Analytical solution of the optimal three dimensional reentry problem using Chapman's exact equations

This paper presents the general solution for the optimal three dimensional aerodynamic control of a lifting vehicle entering a planetary atmosphere. A set of dimensionless variables is introduced, and the resulting exact equations of motion have the distinctive advantage that they are completely free of the physical characteristics of the vehicle. Furthermore, a general lift-drag polar is used to define the aerodynamic control. Hence, the results obtained apply to any type of vehicle of arbitrary weight, dimensions and shape, having an arbitrary polar and entering any planetary atmosphere.

Vinh, N. X.↗

Technological innovations for human outposts on planetary bodies

Technology developments which have applications for establishing man-tended outposts on the moon and Mars are reviewed. The development of pressurized rovers and computer-aided control, repair, and manufacturing is discussed. The possibility of utilizing aerodynamic drag by optimizing dynamic pressure to accomplish the necessary spacecraft velocity reduction for planetary orbital capture is considered and research in the development of artificial gravity is examined.

Clark, Benton C.↗

The 12-foot pressure wind tunnel restoration project model support systems

The 12 Foot Pressure Wind Tunnel is a variable density, low turbulence wind tunnel that operates at subsonic speeds, and up to six atmospheres total pressure. The restoration of this facility is of critical importance to the future of the U.S. aerospace industry. As part of this project, several state of the art model support systems are furnished to provide an optimal balance between aerodynamic and operational efficiency parameters. Two model support systems, the Rear Strut Model Support, and the High Angle of Attack Model Support are discussed. This paper covers design parameters, constraints, development, description, and component selection.

Sasaki, Glen E.↗