Search NASA⌕ Search

SEARCH · Search NASA

Results for “aeroelastic stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Modal forced response of propfans in yawed flow

A modal forced response method for propfans in yawed flow is presented. This capability exists in the Aeroelastic Stability and Response of Propfan (ASTROP3) code developed at the Lewis Research Center. The code uses three-dimensional steady and unsteady cascade aerodynamics by Williams and Hwang (1986) and a NASTRAN finite element model to represent the blade structure. In addition, many utility programs exist in ASTROP3 that help in both the preprocessing of the NASTRAN model and the postprocessing of modal response results. The postprocessing work that computes the blade vibratory displacements and stresses in yawed flow are highlighted here.

Narayanan, G. V.↗

Comparison of experimental rotor damping data-reduction techniques

The ability of existing data reduction techniques to determine frequency and damping from transient time-history records was evaluated. Analog data records representative of small-scale helicopter aeroelastic stability tests were analyzed. The data records were selected to provide information on the accuracy of reduced frequency and decay coefficients as a function of modal damping level, modal frequency, number of modes present in the time history record, proximity to other modes with different frequencies, steady offset in time history, and signal-to-noise ratio. The study utilized the results from each of the major U.S. helicopter manufacturers, the U.S. Army Aeroflightdynamics Directorate, and NASA Ames Research Center using their inhouse data reduction and analysis techniques. Consequently, the accuracy of different data analysis techniques and the manner in which they were implemented were also evaluated. It was found that modal frequencies can be accurately determined even in the presence of significant random and periodic noise. Identified decay coefficients do, however, show considerable variation, particularly for highly damped modes. The manner in which the data are reduced and the role of the data analyst was shown to be important. Although several different damping determination methods were used, no clear trends were evident for the observed differences between the individual analysis techniques. It is concluded that the data reduction of modal-damping characteristics from transient time histories results in a range of damping values.

Warmbrodt, William↗

Aircraft flight flutter testing at the NASA Ames-Dryden Flight Research Facility

Many parameter identification techniques have been used at the NASA Ames Research Center, Dryden Flight Research Facility at Edwards Air Force Base to determine the aeroelastic stability of new and modified research vehicles in flight. This paper presents a summary of each technique used with emphasis on fast Fourier transform methods. Experiences gained from application of these techniques to various flight test programs are discussed. Also presented are data-smoothing techniques used for test data distorted by noise. Data are presented for various aircraft to demonstrate the accuracy of each parameter identification technique discussed.

Kehoe, Michael W.↗

Turbomachinery aeroelasticity at NASA Lewis Research Center

The turbomachinery aeroelastic effort is focused on unstalled and stalled flutter, forced response, and whirl flutter of both single rotation and counter rotation propfans. It also includes forced response of the Space Shuttle Main Engine (SSME) turbopump blades. Because of certain unique features of propfans and the SSME turbopump blades, it is not possible to directly use the existing aeroelastic technology of conventional propellers, turbofans or helicopters. Therefore, reliable aeroelastic stability and response analysis methods for these propulsion systems must be developed. The development of these methods for propfans requires specific basic technology disciplines, such as 2-D and 3-D steady and unsteady aerodynamic theories in subsonic, transonic and supersonic flow regimes; modeling of composite blades; geometric nonlinear effects; and passive and active control of flutter and response. These methods are incorporated in a computer program, ASTROP. The program has flexibility such that new and future models in basic disciplines can be easily implemented.

Kaza, Krishna Rao V.↗

Application of a full-potential solver to bending-torsion flutter in cascades

A two-dimensional, unsteady, full-potential cascade aerodynamic code has been used for flutter calculations. The code, which uses a time-marching implicit scheme with internal Newton-iterations at each time step, allows oscillatory blade motions with phase lag between adjacent blades to be modeled using a single inter-blade passage. This aerodynamic code has been used with a two-degrees-of-freedom typical section structural model to determine the aeroelastic stability of a bladed disk. The unsteady pressure results calculated from the aerodynamic code have been verified by comparison with results from the linear and linearized potential theories. Flutter results have been presented for two cases. A comparison with linear theory shows identical trends; however, the present calculations show a lower flutter frequency.

Bakhle, Milind A.↗

Flexible aircraft dynamic modeling for dynamic analysis and control synthesis

The linearization and simplification of a nonlinear, literal model for flexible aircraft is highlighted. Areas of model fidelity that are critical if the model is to be used for control system synthesis are developed and several simplification techniques that can deliver the necessary model fidelity are discussed. These techniques include both numerical and analytical approaches. An analytical approach, based on first-order sensitivity theory is shown to lead not only to excellent numerical results, but also to closed-form analytical expressions for key system dynamic properties such as the pole/zero factors of the vehicle transfer-function matrix. The analytical results are expressed in terms of vehicle mass properties, vibrational characteristics, and rigid-body and aeroelastic stability derivatives, thus leading to the underlying causes for critical dynamic characteristics.

Schmidt, David K.↗

Rotor blade dynamic design

The rotor dynamic design considerations are essentially limitations on the vibratory response of the blades which in turn limit the dynamic excitation of the fuselage by forces and moments transmitted to the hub. Quantities which are associated with the blade response and which are subject to design constraints are discussed. These include blade frequencies, vertical and inplane hub shear, rolling and pitching moments, and aeroelastic stability margin.

Pritchard, Jocelyn I.↗

Blade mistuning coupled with shaft flexibility effects in rotor aeroelasticity

The effect of bladed-disk polar dissymmetry, resulting from variations in mass from one blade to another, on aeroelastic stability boundaries for a fan stage is presented. In addition to both in-plane and out-of-plane deformations of the bladed-disk, bending of the supporting shaft in two planes is considered, and the resulting Coriolis forces and gyroscopic moments are included in the analysis. A quasi-steady aerodynamics approach is combined with the Lagrangian method to develop the governing equations of motion for the flexible bladed-disk-shaft assembly. Calculations are performed for an actual fan stage.

Khader, Naim↗

Aeroelastic optimization of a helicopter rotor using an efficient sensitivity analysis

To reduce oscillatory hub loads in forward flight, a structural optimization analysis of a hingeless helicopter rotor has been developed and applied. The aeroelastic analysis of the rotor is based on a finite element method in space and time, and linked with automated optimization algorithms. For the optimization analysis two types of structural representation are used: a generic stiffness-distribution and a single-cell thin-walled beam. For the first type, the design variables are nonstructural mass and its placement, chordwise center of gravity offset from the elastic axis, and stiffness. For the second type, width, height and thickness of spar are used as design variables. For the behavior constraints, frequency placement, autorotational inertia and aeroelastic stability of the blade are included. The required sensitivity derivatives are obtained using a direct analytical approach. An optimum oscillatory hub load shows a 25-77 percent reduction for the generic blade, and 30-50 percent reduction for the box-beam.

Lim, Joon W.↗

Selected design issues of some high speed rotorcraft concepts

A study of vehicle concepts for High Speed Rotorcraft applications has been undertaken at Ames Research Center in cooperation with NASA Lewis and Langley Centers, with the objective of defining their technology needs. The design guidelines include a low downwash velocity in hover, good low speed maneuver capabilities and cruise speeds up to 450 knots. Four contractors and a systems analysis effort within NASA have defined promising configurations which may be capable of meeting these goals. This paper addresses challenging problems associated with some of the configurations in the areas of aerodynamics, propulsion, weights and aeroelastic stability.

Talbot, Peter D.↗

Computing The Dynamics Of Helicopters

Comprehensive Analytical Model of Rotorcraft Aerodynamics (CAMRAD) computer program designed to calculate performance of, loads on, and noise generated by, helicopter rotor; vibration of helicopter and its response to gusts; dynamics and handling qualities of helicopter in flight; and aeroelastic stability of helicopter as system. Analysis consistent combination of structural, inertial, and aerodynamical mathematical models applicable to wide range of problems and wide class of vehicles. Written in FORTRAN 77.

Johnson, Wayne↗

Feasibility investigation of general time-domain unsteady aerodynamics of rotors

The feasibility of a general theory for the time-domain unsteady aerodynamics of helicopter rotors is investigated. The wake theory gives a linearized relation between the downwash and the wing bound circulation, in terms of the impulse response obtained directly in the time domain. This approach makes it possible to treat general wake configurations, including discrete wake vorticity with rolled-up and distorted geometry. The investigation establishes the approach for model order reduction; determines when a constrained identification method is needed; verifies the formulation of the theory for rolled-up, distorted trim wake geometry; and verifies the formulation of the theory for wake geometry perturbations. The basic soundness of the approach is demonstrated by the results presented. A research program to complete the development of the method is outlined. The result of this activity will be an approach for analyzing the aeroelastic stability and response of helicopter rotors, while retaining the important influence of the complicated rotor wake configuration.

Johnson, Wayne↗

Cascade flutter analysis with transient response aerodynamics

Two methods for calculating linear frequency domain aerodynamic coefficients from a time marching Full Potential cascade solver are developed and verified. In the first method, the Influence Coefficient, solutions to elemental problems are superposed to obtain the solutions for a cascade in which all blades are vibrating with a constant interblade phase angle. The elemental problem consists of a single blade in the cascade oscillating while the other blades remain stationary. In the second method, the Pulse Response, the response to the transient motion of a blade is used to calculate influence coefficients. This is done by calculating the Fourier Transforms of the blade motion and the response. Both methods are validated by comparison with the Harmonic Oscillation method and give accurate results. The aerodynamic coefficients obtained from these methods are used for frequency domain flutter calculations involving a typical section blade structural model. An eigenvalue problem is solved for each interblade phase angle mode and the eigenvalues are used to determine aeroelastic stability. Flutter calculations are performed for two examples over a range of subsonic Mach numbers.

Bakhle, Milind A.↗

An overview of selected NASP aeroelastic studies at the NASA Langley Research Center

Following an initial discussion of the NASP flight environment, the results of recent aeroelastic testing of NASP-type highly swept delta-wing models in Langley's Transonic Dynamics Tunnel (TDT) are summarized. Subsonic and transonic flutter characteristics of a variety of these models are described, and several analytical codes used to predict flutter of these models are evaluated. These codes generally provide good, but conservative predictions of subsonic and transonic flutter. Also, test results are presented on a nonlinear transonic phenomena known as aileron buzz which occurred in the wind tunnel on highly swept delta wings with full-span ailerons. An analytical procedure which assesses the effects of hypersonic heating on aeroelastic instabilities (aerothermoelasticity) is also described. This procedure accurately predicted flutter of a heated aluminum wing on which experimental data exists. Results are presented on the application of this method to calculate the flutter characteristics of a fine-element model of a generic NASP configuration. Finally, it is demonstrated analytically that active controls can be employed to improve the aeroelastic stability and ride quality of a generic NASP vehicle flying at hypersonic speeds.

Spain, Charles V.↗

Cascade flutter analysis with transient response aerodynamics

Two methods for calculating linear frequency domain aerodynamic coefficients from a time-marching Full-Potential cascade solver are developed and verified. In the first method, the Influence Coefficient method, solutions to elemental problems are superposed to obtain the solutions for a cascade in which all blades are vibrating with a constant interblade phase angle. The elemental problem consists of a single blade in the cascade oscillating while the other blades remain stationary. In the second method, the Pulse Response method, the response to the transient motion of a blade is used to calculate influence coefficients. This is done by calculating the Fourier transforms of the blade motion and the response. Both methods are validated by comparison with the Harmonic Oscillation method and give accurate results. The aerodynamic coefficients obtained from these methods are used for frequency domain flutter calculations involving a typical section blade structural model. An eigenvalue problem is solved for each interblade phase angle mode and the eigenvalues are used to determine aeroelastic stability. Flutter calculations are performed for two examples over a range of subsonic Mach numbers using both flat plates and actual airfoils.

Bakhle, Milind A.↗

Helicopter vibration reduction using structural optimization with aeroelastic/multidisciplinary constraints - A survey

This paper presents a survey of the state-of-the-art in the field of structural optimization when applied to vibration reduction of helicopters in forward flight with aeroelastic and multidisciplinary constraints. It emphasizes the application of the modern approach where the optimization is formulated as a mathematical programming problem, the objective function consists of the vibration levels at the hub, and behavior constraints are imposed on the blade frequencies and aeroelastic stability margins, as well as on a number of additional ingredients that can have a significant effect on the overall performance and flight mechanics of the helicopter. It is shown that the integrated multidisciplinary optimization of rotorcraft offers the potential for substantial improvements, which can be achieved by careful preliminary design and analysis without requiring additional hardware such as rotor vibration absorbers of isolation systems.

Friedmann, Peretz P.↗

Conclusions from high-speed rotorcraft studies

Under the tutelage of NASA-Ames, evaluations have been made of the technology required for high-speed rotorcraft flight with a view to the performance potential and development risks of several candidate configurations. Configurational performance limitations were associated with rotor performance at high Mach numbers and advance ratios, nacelle interference effects on rotor flow, and wing/rotor aeroelastic stability requirements. Attention is given to tiltwing, tilt-for-VTOL/fold-for-cruise rotor, and conventional tiltrotor configurations capable of carrying 30 passengers for the intercity commuter market.

Conway, Scott↗

Numerical and literal aeroelastic-vehicle-model reduction for feedback control synthesis

The simplification of a high-order, literal model for large flexible aircraft is discussed. Areas of model fidelity that are critical if the model is to be used for control law synthesis are presented. Several simplification techniques, some new and some widely available, that can deliver the necessary model fidelity are presented and applied to a model from the literature. The techniques include both numerical and analytical approaches. An analytical approach, based on first-order sensitivity theory, is shown to lead not only to excellent numerical results, but also to closed-form analytical expressions for key system dynamic properties such as the pole/zero factors of the vehicle transfer-function matrix. The analytical results are expressed in terms of vehicle vibrational characteristics and rigid-body and aeroelastic stability derivatives, thus providing insight into the underlying causes for critical dynamic characteristics.

Newman, Brett↗