Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomization energies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development of a Pronghorn Model of the High Temperature Engineering Test Reactor: Preliminary Results from Loss of Forced Cooling #3 [Slides]

This presentation contains results from a Pronghorn model of the High Temperature Engineering Test Reactor (HTTR) operated by the Japan Atomic Energy Agency. The model was used to simulate a loss of forced cooling (LOFC) experiment. This presentation contains preliminary results from a standalone thermal hydraulics model of this LOFC test and some discussion of the results compared to data

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2026

ORNL Report for the Preparation and Verification of a U-233 Spike Solution

In response to a Letter Request from the International Atomic Energy Agency to the United States Support Program, the NNSA’s Nuclear Reference Material Program (NRMP) tasked the Material Signatures and Isotopic Standards (MSIS) group at Oak Ridge National Laboratory to prepare 50 units of a U-233 CRM standard with a unit size of approximately 10 µg of U-233.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Investigation of U content in J-swipe/PIC samples

This final report documents the results of an evaluation of the U content in J-swipes for the International Atomic Energy Agency (IAEA). J-swipes are manufactured with inked numbers (1–30) and U backgrounds that are considered consistent across different lots and manufacturing times. These characteristics make them ideal for use by IAEA inspectors for pre-inspection check samples to ensure inspectors are not cross-contaminating sites. However, recent work has found elevated U concentrations in the inked numbers compared with the J-swipe material. To determine whether the inked numbers correlate with the U backgrounds, triplicate U content measurements were made on Swipes 1, 2, 11, 22, and 28. Triplicates of each swipe were processed through the standard chemistry used by the Oak Ridge National Laboratory Network of Analytical Laboratories team and analyzed for U content by isotope dilution via multicollector inductively coupled plasma mass spectrometry. Finally, samples were made by mass consisting of only ink areas and only cotton swipe material to determine the trace element differences between the cotton and the ink.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2026

Refining a Novel Process Monitoring Method to Safeguard Continuously Cycling Designs Using Isotopic Ratios

In advanced reactor (AR) designs, a common feature is continuous chemical processing and circulation of the nuclear material. This work bridges a significant measurement gap in safeguarding reactors with circulating fuel or continuous refueling by leveraging and building on the isotope ratio method first developed by our team under an FY21 Advanced Reactors International Safeguards Engagement (ARISE) project (Uribe et al. 2021). In circulating fuel designs, the radioisotope inventory changes from traditional effects (e.g., radioactive decay, fission) but also includes material transport due to pressure and temperature gradients. Such designs may also require regular or continuous additions or removals during operation, which significantly increases the rate of inventory change compared to traditional pressurized water reactor (PWR)s. Thus, directly tracking the nuclear inventory is ineffective since the isotopes are continuously added and removed. The isotope ratio method instead focuses on detecting changes to the input and output flows of radioisotopes. Previous work showed that for well-chosen pairs of isotopes, the isotopic ratio provides a sensitive and lasting indicator of deviation from normal conditions (e.g., startup, shutdown, diversion). The isotope ratio method is a process monitoring method with potential for application in for forward-looking approaches to International Atomic Energy Agency (IAEA) safeguards. The original process monitoring method was developed for a specific case—the decay tank of a thorium-fueled molten salt breeder reactor. In this expanded work, we explored other types of reactors and processes with nonstationary (e.g., flowing) nuclear material, which are difficult to safeguard with traditional methods because of the transient nature of the systems. The goal of the present work is to generalize the isotope ratio method for use in processes with continuously flowing nuclear material. All continuous processes have an average time for isotopes to be replaced in the system. The isotope ratio method works by choosing radioisotopes with half-lives both above and below the processing time. The present work seeks to explore which isotopes are suitable for the method by simulating the nuclear inventory, radioisotope emissions, and detector responses for several classes of advanced reactors. While the method can in principle be applied to other processes (e.g., enrichment or reprocessing facilities), the present work limits scope to ARs with continuously flowing fuel. Section 2 details the mathematics supporting the isotope ratio method, and Section 3 introduces the representative ARs selected for this work. Section 4 discusses how each reactor was analyzed, and Section 5 showcases the results for each representative reactor. Finally, Section 6 provides concluding remarks and suggests pathways for further analysis.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2022

Examining Autonomous Inspection of Geologic Repositories

Geological repositories for nuclear waste, including spent nuclear fuel, present a significant challenge for traditional International Atomic Energy Agency (IAEA) safeguards tools due to their inaccessibility and demanding operational conditions. The IAEA has been working closely with Member State organizations currently involved in repository construction and planning including Euratom, the Finnish and Swedish regulatory authorities, and relevant facility operators. However, the verification challenge remains unsolved, and there persists an out-standing need for tools and approaches that will help the IAEA verify that no nuclear material is diverted from a repository environment. The challenge is also not static as activities must encompass verification of the design prior to and during the construction/operation phase, and post backfill. Throughout these various phases, it is imperative that the IAEA maintains a continuity of knowledge (CoK) of all material, including information on material inventory and flow. This paper highlights these challenges and outlines how they might be addressed by using remote or autonomous vehicles. Specifically, it discusses the current state of the art in robotic autonomy for known or partially known environment mapping and patrolling, as well as shared autonomy, where humans collaborate with closed loop autonomation to complete tasks. The feasibility of using rovers for these verification tasks is explored, along with the challenges associated with system implementation. Hardware and software suggestions are provided based on the adoption of similar technologies in other comparable areas and ability to close technical gaps. Finally, human-robotic interactions are considered based on the challenges of the environment of the repository and effective deployment and continued operation of the robot system

autonomous monitoring↗
DOE OSTI2021

Economic Dispatch Model of Nuclear High-Temperature Reactor with Hydrogen Cogeneration in Electricity Market

Hydrogen produced without carbon emissions could be a useful fuel as nations look to decarbonize their electricity, transport, and industry sectors. Using the iodine–sulfur (IS) cycle coupled with a nuclear heat source is one method for producing hydrogen without the use of fossil fuels. An economic dispatch model was developed for a nuclear-driven IS system to determine hydrogen sale prices that would make such a system profitable. The system studied is the HTTR-GT/H2, a design for power and hydrogen cogeneration at the Japan Atomic Energy Agency’s High Temperature Engineering Test Reactor. This study focuses on the development of the economic model and the role that input data plays in the final calculated values. Using a historical price duration curve shows that the levelized cost of hydrogen (LCOH) or breakeven sale price of hydrogen would need to be 98.1 JPY/m3 or greater. Synthetic time histories were also used and found the LCOH to be 67.5 JPY/m3. The price duration input was found to have a significant effect on the LCOH. As such, great care should be used in these economic dispatch analyses to select reasonable input assumptions.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Proton Electric Charge Radius from Lepton Scattering

A proton is a bound state of a strong interaction, governed by Quantum Chromodynamics (QCD). The electric charge radius of a proton, denoted by $r^{p}_{E}$, characterizes the spatial distribution of its electric charge carried by the quarks. It is an important input for bound-state Quantum Electrodynamic (QED) calculations of the hydrogen atomic energy levels. However, physicists have been puzzled by the large discrepancy between $r^{p}_{E}$ measurements from muonic hydrogen spectroscopy and those from ep elastic scattering and ordinary hydrogen spectroscopy for over a decade. Tremendous efforts, both theoretical and experimental, have been dedicated to providing various insights into this puzzle, but certain issues still remain unresolved, particularly in the field of lepton scatterings. This review will focus on lepton-scattering measurements of $r^{p}_{E}$, recent theoretical and experimental developments in this field, as well as future experiments using this technique.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

A New Inelastic Neutron Spectrometer HODACA

In this study, a new multiplex-type inelastic neutron scattering spectrometer, HOrizontally Defocusing Analyzer Concurrent data Acquisition spectrometer (HODACA), was recently developed and built at the C1-1 cold neutron beam port in the neutron source reactor JRR-3 at Japan Atomic Energy Agency. The spectrometer is suitable for dynamics measurements in the energy range of -1 meV ≲ ℏω ≲ 7 meV, catering to a broad array of research fields in physics and material science. HODACA combines 24 detectors and 132 pieces of analyzer crystals and has an estimated measurement efficiency that is 70 times greater than the existing conventional triple-axis spectrometer at the C1-1 beam port. The concept, design, specification, and results of commissioning experiments are described.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

SUSTAINING NUCLEAR SECURITY REGIMES THROUGH CONTINUOUS LEARNING EXPERIENCES

As Member States plan, implement, and ultimately sustain their nuclear security regimes, human resource development supporting these regimes are paramount. Human resource development broadly includes programs addressing education, training, and knowledge management. The International Atomic Energy Agency’s Implementing Guide, Sustaining a Nuclear Security Regime, highlights the importance of national-level support for assigning resources that help ensure States are able to develop and retain sufficient human resources in the short, medium, and long term. Determining the resources needed to support education, training, and knowledge management is not an easy task, and knowledge management is a practice often overlooked when States plan for and allocate human resources for a nuclear security regime. The paper highlights the importance of implementing knowledge management practices as part of sustaining a nuclear security regime. Given the availability of secure web-based knowledge management tools, a nuclear security human resource development program should not depend solely on direct human interactions. To that end, the paper will offer an approach for planning and implementing a knowledge management system by using the U.S. Department of Energy/National Nuclear Security Administration’s Nuclear Smuggling Detection and Deterrence Knowledge Management Website as a case study. This example offers useful lessons learned for States considering or actively developing their own nuclear security knowledge management efforts and human resource development.

Tremonte, Matthew M.↗
DOE OSTI2020

Regulatory Development Challenges and Opportunities for the Safe and Secure Transport of Radioactive Materials

Drafting regulations for transport safety and transport security achieve two separate objectives, which can lead to divergent outcomes. With transport safety, the principle goal is to protect the public and the environment from the effects of ionizing radiation, while in contrast, the principle goal of transport security is to protect the material from malicious actors. While many Member States may have transport safety regulations for radioactive materials, transport security regulatory development is still in its nascent stages globally. Trying to develop harmonized transport safety and transport security regulations could lead to challenges ranging from differences in terminology used in transport safety versus terminology uses in transport security, roles and responsibilities for the variety of stakeholders involved in transport, and finally, the possible role of multiple competent authorities in governing the transport of dangerous goods, which includes radioactive material. While the International Atomic Energy Agency (IAEA) is currently developing a process of a methodology for drafting transport security regulations, any process must address both safety considerations and security requirements. (As the most vulnerable part of the life cycle of radioactive materials, the need for harmonized transport safety/transport security regulations is essential.) This paper investigates the regulatory elements of the safety-security interface for nuclear and other radioactive material in transport. Examining challenges including use of terms, the role of multiple competent authorities, and practical challenges involved in the safe and secure transport of radioactive material, the paper analyzes the need for integrated regulatory development for the safe and secure transport of these materials.

Anderson, Kimberly↗
DOE OSTI2020

Nuclear Science Training for Secondary School Teachers at Argonne National Laboratory - 2019

In continued support of International Atomic Energy Agency (IAEA) project RAS/0/079, with its stated goal to educate 1 million students on the topic of nuclear science by 2021, Argonne National Laboratory (Argonne) hosted its second two-week nuclear science and technology training course for secondary school teachers in October 2019. A modified course format was adopted based on experience from the first course held at Argonne in 2018, along with similar project workshops held across the world. The results of the course, in terms of both technical knowledge retention and teaching capabilities, demonstrated the benefits of the revised approach.

Grabaskas, David↗
DOE OSTI2020

The Floating Chameleon: Floating Nuclear Power Plants and the Nexus of Maritime and Nuclear Security Law

During the 63rd regular session of the International Atomic Energy Agency (IAEA) General Conference, as part of Norway's statement to the General Conference, Mr. Auden Halvorsen, State Secretary for Norway, made the following statement about transportable nuclear power plants (TNPPs): "Deployment of transportable nuclear power plants—TNPPs—demands our attention. The Agency must intensify its conversations of all aspects of the safety and security of such facilities. . . . The scope and applicability of existing requirements and instruments need to be clarified and developed including dialogue with the International Maritime Organization [IMO]." Ensuring the security of TNPPs is essential for their deployment and implementation. TNPPs may be floating nuclear power plants (FNPPs), which bring together elements of nuclear security related to the nuclear power plant with elements of maritime security. Insofar as an FNPP weds the principles of nuclear and maritime security, it also weds the two domains, the ancient traditions and contemporary practices of maritime law with the contemporary practices of nuclear law. Fundamentally, this raises the question, what are the legal requirements for the security of a FNPP? Although both maritime law and nuclear law have established regimes for security through various legal instruments, does an FNPP expose gaps between the current international legal instruments? The previous question of whether international legal regimes define requirements for the security of FNPPs, but a threshold question remains: what is an FNPP? For purposes of nuclear and maritime security, is an FNPP a facility, is an FNPP a vessel and therefore a transport, or does an FNPP change its status based upon temporal and spatial considerations such as when it is docked at a port generating power or in transit to its destination? This set of questions, and others addressed later in this article, highlights that the issue is not merely a question about security but intersects elements of safety whether an FNPP is in uncharted waters of the international regime for both nuclear and maritime law. Here, this paper addresses many of the questions posed above related to the security regulations for an FNPP.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2020

International Symposium on Transport Security of Nuclear and other Radioactive Material; Tokyo, Japan, November 2019

As an outcome of the Fourth Nuclear Security Summit of 2016, held in Washington D.C., the Governments of Australia, Canada, Czech Republic, Finland, France, Hungary, Italy, Japan, Kazakhstan, Morocco, Spain, the Republic of Korea, Thailand, the United Kingdom, and the United States reaffirmed, through INFCIRC/909, their will to further improve the overall security in the transport of nuclear and other radioactive materials. With this goal in mind, each expressed their commitment to further exchange national practices with other countries through the IAEA and the Global Initiative to Combat Nuclear Terrorism (GICNT). They also committed to actively support the IAEA as the central organization for coordinating activities and developing guidance documents and to support the GICNT and the Global Partnership Against the Spread of Weapons and Materials of Mass Destruction in developing and implementing its nuclear transport security activities. Both of these organizations address the commitments regarding nuclear transport security as outcomes of the Nuclear Security Summit 2016. In an effort to continue the momentum from the Nuclear Security Summit, the Government of Japan, in cooperation with the Integrated Support Center for Nuclear Nonproliferation and Nuclear Security of Japan Atomic Energy Agency (ISCN/JAEA), hosted the International Transport Security Symposium in November 2019. With over fifty countries invited to attend, the event exchanged and promoted good practices in several topical area sessions related to the security of nuclear and other radioactive material in transport. Topical sessions included Laws and Regulatory Framework, Physical Protection Systems, Response Actions, and Insider/Information Security. The Symposium built support for transport security and encouraged IAEA Member States to actively work regionally and internationally with the IAEA’s transport security programme through the practical implementation and incorporation of IAEA Nuclear Security Series recommendations and guidance into their national frameworks for transport security. From these sessions, to the host detailed a recommended path forward for future engagements in the security of nuclear and radioactive material in transport. The paper will discuss the Symposium’s outcomes and highlight the forward momentum made by both signatories and non-signatories for the strengthening of all the critical elements of a State’s transport security regime, including physical protection systems, insider threats to the nuclear and radioactive material supply chains, planning and capabilities for law enforcement response to malicious transport security events, and employment of technology to address critical vulnerabilities to the transport of nuclear and other radioactive materials.

Holt, Katherine↗
DOE OSTI2020

Autonomous Monitoring of Nuclear Repositories: Current State of the Art and Future Directions

Geological repositories for nuclear waste, including spent nuclear fuel, present a significant challenge for traditional International Atomic Energy Agency (IAEA) safeguards tools due to their inaccessibility and demanding operational conditions. The IAEA has been working closely with Member State organizations currently involved in repository construction and planning, including Euratom, the Finnish and Swedish regulatory authorities, and relevant facility operators. However, the verification challenge remains unsolved, and there persists an out- standing need for tools and approaches that will help the IAEA verify that no nuclear material is diverted from a repository environment. The challenge is also not static. Activities must encompass verification of the design, prior to and during the construction/operation phase, and post backfill. Throughout these various phases, it is imperative that the IAEA maintains a continuity of knowledge (CoK) of all material including information on material inventory and flow. This paper highlights these challenges and outlines how they might be addressed by using remote or autonomous vehicles. Specifically, we discuss the current state of the art in robotic autonomy for known or partially known environment mapping and patrolling, as well as shared autonomy, where humans collaborate with closed-loop autonomation to complete tasks. We explore the feasibility of using rovers for these verification tasks, along with the challenges associated with system implementation. Hardware and software suggestions are provided based on the adoption of similar technologies in other comparable areas and ability to close technical gaps. Lastly, human-robotic interactions are considered based on the challenges of the environment of the repository and effective deployment and continued operation of the robot system.

geologic repository, safeguards, IAEA, Robotics↗
DOE OSTI2020

Safeguards Technical Objectives for Thorium Molten Salt Reactor Fuel Cycles

China, Denmark, France, India, Indonesia, the United Kingdom, and the United States, among others, are exploring commercial thorium fuel cycles for domestic power production and/or international export. For any thorium fuel cycle facilities built and/or operated in a non-nuclear weapon State with a comprehensive safeguards agreement, those facilities and any associated nuclear material would be subject to international nuclear safeguards by the International Atomic Energy Agency (IAEA). Thorium fuel cycle facilities offered for the application of safeguards under a voluntary offer agreement by a nuclear weapon State would also be subject to safeguards, if selected by the IAEA. Compared to uranium/plutonium fuel cycle facilities, thorium fuel cycle facilities are comparatively diverse from an inspection and accounting perspective, differing greatly in material type, form, and design from uranium/plutonium fuel cycle facilities and also from each other. Of these, the most complex thorium fuel cycles – and therefore likely the most challenging to the implementation of international nuclear safeguards – are those that include thorium molten salt reactors. With thorium fuel cycles approaching near-term commercial deployment timelines, it is imperative that the international nuclear safeguards community begins to think about how to adapt existing international nuclear safeguards concepts and approaches to thorium fuel cycles, as well as mitigate any gaps that may exist. This paper focuses on the development of recommended safeguards technical objectives for efficient and effective application of international nuclear safeguards measures (e.g., containment / surveillance, non-destructive assay, destructive assay, environmental sampling) to thorium molten salt reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Minimum Detectable Quantity Calculation for Radiation Portal Monitors

The minimum detectable quantity of a radiation portal monitor is the smallest amount of radioactive material that can be detected passing through the monitor (with a specified detection probability). The minimum detectable quantity is a function of many factors, including isotope, velocity, distance between pillars, height of portal and vehicle, source distribution and position, background radiation, background suppression, detector volume and positions, detector efficiency, decision metrics and algorithms, the presence of NORM (naturally occurring radioactive material), and alarm thresholds. Experimentally testing a radiation portal monitor to failure for all combinations of these factors is extremely time-consuming and often cost prohibitive. This document outlines a straightforward method for quickly estimating the minimum detectable quantity for moving sources over a large variety of conditions with a minimal number of static measurements. The document also describes a proof of concept software application that the International Atomic Energy Agency has designed based on the described method that can be used by Member States to estimate a monitor’s minimum detectable quantity.

Blessinger, Christopher S.↗
DOE OSTI2021

Using Machine Learning to Track Objects Across Cameras

Video surveillance is one of the most important technologies used by the International Atomic Energy Agency in international safeguards. At large, complicated facilities, multiple surveillance cameras are deployed to monitor the transfer of safeguards-relevant objects across the site. During inspections, all surveillance videos are reviewed to ensure the objects are not manipulated or diverted during transfer, a laborious, time-consuming task. This work describes using deep machine learning algorithms to track objects automatically across multiple cameras, greatly improving the efficiency of the review process. The fundamental problem in this object tracking task across multiple cameras is how to associate the same object, which may show extreme intra-class variations, such as viewpoints, occlusions, and various scales, in different and even non-overlapped cameras. Object re-identification (Re-ID) in nuclear facility video surveillance is even more challenging than classic person or vehicle Re-ID problems because different instances in the same category may display an identical appearance. One observation from nuclear facility surveillance videos is that all objects must be carted (e.g., via forklift) to move. Therefore, the spatial context information of an object, which provides the feature from the carrier, is critical for the object Re-ID task. This work proposes a two-stream convolutional neural networks model that takes features of objects and their surrounding regions into account. Moreover, the custom videos usually are gleaned from different scenes from the training data, which may have extreme variations in illumination changes and/or cluttered backgrounds. Directly applying the trained model to custom videos will dramatically decrease the performance. To tackle this problem, an advanced domain adaptation technique is proposed to mitigate the gap between the data taken from different scenes. The proposed framework will track objects of interest across a nuclear complex. The resulting tracks can be used in further analyses, such as event/activity recognition, anomaly detection, etc.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2021

IAEA Facility-Level Safeguards and Implementation and Advanced Verification Technologies

IAEA Facility-Level Safeguards and Implementation - This presentation is intended to introduce the audience to the application of international safeguards by the International Atomic Energy Agency at nuclear facilities around the world. It covers the State Level Approach, random statistical sampling processes, material balance area structure, non-destructive assay techniques, and inspection areas. Addition of advanced verification technologies for the IAEA

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗