Search NASA⌕ Search

SEARCH · Search NASA

Results for “block copolymer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

End-exclusion zones in strongly stretched, molten polymer brushes of arbitrary shape

Theories of strongly stretched polymer brushes, particularly the parabolic brush theory, are valuable for providing analytically tractable predictions for the thermodynamic behavior of surface-grafted polymers in a wide range of settings. Furthermore, the parabolic brush limit fails to describe polymers grafted to convex curved substrates, such as the surfaces of spherical nanoparticles or the interfaces of strongly segregated block copolymers. It has previously been shown that strongly stretched curved brushes require a boundary layer devoid of free chain ends, requiring modifications of the theoretical analysis. While this “end-exclusion zone” has been successfully incorporated into the descriptions of brushes grafted onto the outer surfaces of cylinders and spheres, the behavior of brushes on surfaces of arbitrary curvature has not yet been studied. We present a formulation of the strong-stretching theory for molten brushes on the surfaces of arbitrary curvature and identify four distinct regimes of interest for which brushes are predicted to possess end-exclusion zones, notably including regimes of positive mean curvature but negative Gaussian curvature. Through numerical solutions of the strong-stretching brush equations, we report predicted scaling of the size of the end-exclusion zone, the chain end distribution, the chain polarization, and the free energy of stretching with mean and Gaussian surface curvatures. Through these results, we present a comprehensive picture of how the brush geometry influences the end-exclusion zones and exact strong-stretching free energies, which can be applied, for example, to model the full spectrum of brush geometries encountered in block copolymer melt assembly.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Membrane-Induced Vanadium Crossover-Blocking Polybenzimidazole Copolymer with Exceptional Proton Selectivity

Broad deployment of redox flow batteries is hindered, in part, due to the lack of highly selective ion-exchange membranes with high proton conductivity. We report a post-functionalization strategy for polybenzimidazole copolymer (PBI-co) membranes by a reacting mixture of concentrated sulfuric and phosphoric acids that led to improved membrane selectivity while retaining high proton conductivity. Fourier-transform infrared spectroscopy confirmed successful sulfonation and protonation of benzimidazole functionalities. PBI-co exhibits a very high room-temperature proton conductivity of 0.138 S cm -1 , as measured by electrochemical impedance spectroscopy. PBI-co also demonstrates electromigration crossover mitigation under applied current densities up to 500 mA cm -2 , and voltage pulses up to 1.4 V, while also inhibiting diffusion-driven vanadium crossover for over 20 days. Single-cell vanadium flow battery testing on post-functionalized PBI-co further confirms state-of-the-art battery performance with an ~99.5% Coulombic efficiency at 100 mA cm -2 and an area-specific resistance of ~20 mO cm 2 lower than Nafion-212 membrane.

25 ENERGY STORAGE↗
DOE OSTI2023

Hydrophobic pockets built in polymer micelles enhance the reactivity of Cu 2+ ions

We report the hydrophobicity-enhanced reactivity of Cu2+ ions as an ester hydrolase. Using a dipicolylamine (DPA) containing reversible addition–fragmentation chain transfer agent, the synthetic sequence, either hydrophobic or hydrophilic first in amphiphilic block copolymers of polystyrene-block-poly(N'N-dimethylacrylamide) (PS-b-PDMA), was varied to control the location of the binding motif, DPA, in the hydrophobic core or on the hydrated corona of polymer micelles. The hydrophobicity of Cu 2+ sites showed a significant impact (as large as 60 times more activity) on their catalytic efficiency towards ester hydrolase. With two different kinetic modes, including Michaelis–Menten and the reverse saturation kinetics models, the binding constant Kb of the substrates to Cu 2+ sites were quantitatively analyzed and we demonstrate that hydrophobicity favors the binding of the substrates to Cu2+ sites at polymer micelles with smaller sizes, however, K b decays exponentially with micellar diameters. Despite the diffusion barrier, hydrophobicity shows a profound impact on the catalytic rate constant kc that measures the single conversion rate of bound substrates to products. There is a 16–20 times kinetic enhancement in the hydrolase activity, completely endowed by the hydrophobic microenvironment of Cu 2+ sites compared to micelles with similar sizes. Our results indicate how the hydrophobicity of Cu 2+ -containing micelles can impact the catalytic efficiency and potentially illustrate a promising way toward the design of bioinspired catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Block graft copolymer binders and their use in silicon-containing anodes of lithium-ion batteries

A graft copolymer composition comprising the following structure: wherein: Ax represents a polymer backbone having a number of polymerized monomer units x; [By] represents a multiplicity of a graft polymer side chain having a number of polymerized monomer units y, and at least a portion of the monomer units in By contains a group —C(O)OM, with M independently selected from H and alkali metals; [C] represents a multiplicity of positions on the polymer backbone Ax where the graft polymer side chain B or any other graft polymer side chain is not attached; the subscript w represents a grafting density of the group By, wherein w is an integer within a range of 10-50%; and the subscript z represents a density of the group C, wherein z=(100−w) %. The invention is also directed to lithium-ion batteries in which the above-described composition is incorporated in an anode of the battery.

Saito, Tomonori↗
DOE OSTI2026

Side-Chain Nanophase Separation Broadens the Double-Gyroid Stability Window in PS–PODMA Diblock Copolymers

Expanding access to bicontinuous network phases in block copolymers remains an important challenge because the double gyroid (DG) phase is usually stable only within a narrow composition window in conventional diblock copolymers. Here, we show that poly(styrene-block-octadecyl methacrylate) (PS-b-PODMA) exhibits an unusually broad DG window. Small-angle X-ray scattering measurements across a wide composition range reveal lamellar and hexagonally packed cylindrical phases at higher polystyrene fractions. In contrast, the DG phase appears over 0.22 ≤ fPS ≤ 0.35, with DG/BCC and DG/HEX coexistence near fPS = 0.18 and 0.40, respectively. This broad DG window is much wider than those reported for neat diblock copolymers and is not readily explained by conformational asymmetry alone. Wide-angle X-ray scattering detects a characteristic signature of nanophase separation within the PODMA-rich domains, indicating that side-chain ordering introduces an additional internal length scale. These results suggest that hierarchical side-chain nanophase separation modifies packing frustration and curvature selection, thereby broadening DG stability and providing a new molecular design strategy for stabilizing complex network morphologies.

Seko, Tamio↗
DOE OSTI2021

Effect of stereochemistry on nanoscale assembly of ABA triblock copolymers with crystallizable blocks

We report on the nanoscale assembly of poly(lactic acid)-b-poly(ethylene oxide)-b-poly(lactic acid) (PLA-PEO-PLA) triblock copolymers in water, focusing on the effect of stereochemistry, where the PLA blocks are statistical copolymers of l-lactide and d-lactide with l/d ratios of 100/0, 95/5, 90/10, 85/15, 75/25, and 50/50. Small-angle neutron scattering (SANS) shows a nearly constant d-spacing as concentration varies in triblock systems with l/d ratios of 90/10 and 95/5, which we attribute to inhomogeneity in the structure of these gels, supported by previous USANS and confocal microscopy studies. The SANS data fit well to a core-shell ellipsoid form factor model with a hard-sphere structure factor. Polymeric micelles with l/d ratios from 75/25 to 85/15 displayed very high aggregation numbers, consistent with a strong interaction between PLA chains and the enhanced storage modulus observed in rheological studies of these systems. While the 90/10 and 95/5 samples showed lower aggregation numbers, their SANS profiles shows close spacing between micelles, which may promote a high fraction of intermicellar bridging chains, also consistent with a higher storage modulus. Overall, these results provide insight into the micellar assembly behavior of block copolymers with a crystallizable block, and indicate that tuning stereochemistry of PLA-based block copolymers is an effective means of modifying micellar properties for specific applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

All-organic self-separating three-dimensionally nanoarchitected electrochemical energy storage devices

This work realizes a three-dimensionally (3D) nanoarchitected, all organic, "self-separating" lithium-ion electrochemical energy storage (EES) device that is cycled as a solid-state full cell. The device is enabled by a monolithic carbon anode with a co-continuous pore network, derived from the structure direction of resols by an ultra-large molar mass block copolymer (BCP), poly(styrene-block-2-dimethylaminoethyl methacrylate) (SA). Electropolymerization of a single-phase conductive and redox-active material, poly((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)methyl 9,10-dioxo-9,10-dihydroanthracene-2-carboxylate) (PAQEDOT), into the pore space provides the cathode of the cell. The device is electronically contacted to the relevant electrode network enabled by the co-continuous nature of each electrode. Electrochemical processing via cycling against external lithium in an electrolyte generates a solid electrolyte interphase (SEI) as a separator and lithiates the cell electrodes, after which the EES device is cycled in the solid state. While the full cell does not demonstrate high cyclability, the best full cell demonstrates a discharge capacity of 267 milliamp hours per gram (mAh/g). This work marks, to the best of knowledge of the authors, the first example of an all-organic materials derived 3D nanoarchitected EES device, as well as the first design of "self-separating" cell fabrication. Furthermore, generalization of the design to another co-continuous carbon form factor is demonstrated.

FOS: Physical sciences↗
NASA NTRS1976

Clays as possible catalysts for peptide formation in the prebiotic era

From the point of view of prebiotic synthesis, clays might have performed functions of concentration, catalysis, and protection of molecules. The degrees of polymerization obtained, when amino acid adenylates are added to montmorillonite suspensions in water, are much higher than those obtained by polymerization in the absence of such a clay. In addition, they are of a discrete spectrum, usually multiples of 6 or 7, and reach values of up to 40 mers. In the absence of clay a continuous spectrum of degrees of polymerization is obtained, and usually up to 4-6 mers only. Copolymerization in the absence of clays yields mostly random copolymers, in their presence mostly block copolymers are obtained. Optical density measurements show that after adsorption has taken place on the clay, stacking of its layers occurs. Polymerization starts only after these stacked layers have been formed

Paecht-Horowitz, M.↗
NASA NTRS1992

Imide/arylene ether copolymers with pendent trifluoromethyl groups

A series of imide/arylene ether block copolymers were prepared using an arylene ether block containing a hexafluoroisopropylidene group and an imide block containing a hexafluoroisopropylidene and a trifluoromethyl group in the polymer backbone. The copolymers were characterized and mechanical properties were determined and compared to the homopolymers.

Jensen, Brian J.↗
NASA NTRS1991

LaRC-ITPI/arylene ether copolymers

As part of an effort to develop high performance structural resins for aerospace applications, work has continued on block copolymers containing imide and arylene ether segments. The arylene ether block used in this study contains a bulky fluorene group in the polymer backbone while the imide block contains an arylene ketone segment similar to that in the arylene ether block and has been named LaRC-ITPI. A series of imide/arylene ether block and segmented copolymers were prepared and characterized. Films were prepared from these copolymers and mechanical properties were measured.

Jensen, Brian J.↗
DOE OSTI2022

Tuning conformational structures of imidazolium ionenes with 1-ethyl-3-methylimidazolium ionic liquid solvents

In this report the structures and conformations of imidazolium ionenes solvated in 1-ethyl-3-methylimidazolium ionic liquids (ILs) ([C 2 mim + ][X - ]) are investigated using molecular dynamics simulations. Four different ionenes poly(decylimidazolium) (PD 10 ), poly(tetraethyleneglycolimidazolium) (PE 10 ), alternating copolymer (P(ED) 5 ), and a block copolymer PE 5 D 5 are immersed in [C 2 mim + ][X - ], where [X - ] = thiocyanate [SCN - ], tetrafluoroborate [BF 4 - ], and trifluoromethanesulfonate [TfO - ]. The radius of gyration indicates that the ionene chains are more extended when immersed in [TfO - ] compared to [BF 4 - ] and [SCN - ], while the solvent accessible surface area shows that PE 10 is the most contracted ionene among all systems. The electrostatic interactions between the ionenes and the ILs are very consistent with the inherent electrostatic characteristics of the different anions, which can be quantified using the Ionic Polarity Index (IPI). The ionene configurations and dynamics strongly depend on the backbone functionality and architecture of the chain, due to the balance between the inter- and intra-molecular interactions in these systems.

42 ENGINEERING↗
DOE OSTI2023

Entropic Penalty Switches Li + Solvation Site Formation and Transport Mechanisms in Mixed Polarity Copolymer Electrolytes

Emerging solid polymer electrolyte (SPE) designs for efficient Li-ion (Li + ) conduction have relied on polarity and mobility contrast to improve conductivity. To further develop this concept, we employ simulations to examine Li + solvation and transport in poly(oligo ethylene methacrylate) (POEM) and its copolymers with poly(glycerol carbonate methacrylate) (PGCMA). We find that Li + is solvated by ether oxygens instead of the highly polar PGCMA, due to lower entropic penalties. The presence of PGCMA promotes single-chain solvation, thereby suppressing interchain Li + hopping. The conductivity difference between random copolymer PGCMA-r-POEM and block copolymer PGCMA-b-POEM is explained in terms of a hybrid solvation site mechanism. With diffuse microscopic interfaces between domains, PGCMA near the POEM contributes to Li + transport by forming hybrid solvation sites. The formation of such sites is hindered when PGCMA is locally concentrated. These findings help explain how thermodynamic driving forces govern Li + solvation and transport in mixed SPEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Implications of styrenic triblock copolymer gel mechanics on midblock bridging fraction

Triblock copolymer gels have garnered considerable scientific interest over the past few decades and are used in a variety of applications including consumer cushioning, pressure-sensitive adhesives, and ballistics gels. While many of their applications rely upon understanding mechanical properties, mechanical studies of block copolymer gels are relatively disjointed with each focusing on specific copolymers, which inherently have a fixed molecular weight and composition. Here, the present study examines the quasistatic mechanical response of styrenic triblock copolymer gels composed of seven unique triblock copolymers at various concentrations. Resultant stress-extension data is fitted with the slip-tube network (STN) theory that describes gel mechanics based upon crosslinked network (G c ) and chain entanglement (G e ) modulus contributions. Collectively, modulus contributions imply that midblock bridging is independent of copolymer identity (i.e., molecular weight and block fraction) and dependent on triblock copolymer concentration via F b ∝ φ ABA 0.91±0.39 over the concentration range examined (φ ABA = 0.05–0.39). Gels composed of a complementary diblock-triblock copolymer pair were subsequently analyzed to explore the influence of interlocking loop-loop and loop-bridge pairs within the effective midblock bridging population. These results point to the presence of a physically significant quantity of interlocked loops, but quantitative analysis was inconclusive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗