Search NASA⌕ Search

SEARCH · Search NASA

Results for “blocking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Cycling of block copolymer composites with lithium-conducting ceramic nanoparticles

Solid polymer and perovskite-type ceramic electrolytes have both shown promise in advancing solid-state lithium metal batteries. Despite their favorable interfacial stability against lithium metal, polymer electrolytes face issues due to their low ionic conductivity and poor mechanical strength. Highly conductive and mechanically robust ceramics, on the other hand, cannot physically remain in contact with redox-active particles that expand and contract during charge-discharge cycles unless excessive pressures are used. To overcome the disadvantages of each material, polymer-ceramic composites can be formed; however, depletion interactions will always lead to aggregation of the ceramic particles if a homopolymer above its melting temperature is used. In this study, we incorporate Li 0.33 La 0.56 TiO 3 (LLTO) nanoparticles into a block copolymer, polystyrene- b -poly (ethylene oxide) (SEO), to develop a polymer-composite electrolyte (SEO-LLTO). TEMs of the same nanoparticles in polyethylene oxide (PEO) show highly aggregated particles whereas a significant fraction of the nanoparticles are dispersed within the PEO-rich lamellae of the SEO-LLTO electrolyte. We use synchrotron hard x-ray microtomography to study the cell failure and interfacial stability of SEO-LLTO in cycled lithium-lithium symmetric cells. Three-dimensional tomograms reveal the formation of large globular lithium structures in the vicinity of the LLTO aggregates. Encasing the SEO-LLTO between layers of SEO to form a “sandwich” electrolyte, we prevent direct contact of LLTO with lithium metal, which allows for the passage of seven-fold higher current densities without signatures of lithium deposition around LLTO. We posit that eliminating particle clustering and direct contact of LLTO and lithium metal through dry processing techniques is crucial to enabling composite electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Safety and efficacy of peripheral nerve blocks to treat refractory headaches after aneurysmal subarachnoid hemorrhage – A pilot observational study

Objectives: Headache after aneurysmal subarachnoid hemorrhage (HASH) is common, severe, and often refractory to conventional treatments. Current treatment standards include medications including opioids, until the pain is mitigated. Peripheral nerve blocks (PNBs) may be an effective therapeutic option for HASH. We conducted a small before-and-after study of PNBs to determine safety, feasibility, and efficacy in treatment of HASH. Methods: We conducted a pilot before-and-after observational study and collected data for 5 patients in a retrospective control group and 5 patients in a prospective intervention PNB group over a 12-month period. All patients received a standard treatment of medications including acetaminophen, magnesium, gabapentin, dexamethasone and anti-spasmodics or anti-emetics as needed. Patients in the intervention group received bilateral greater occipital, lesser occipital, and supraorbital PNBs in addition to medications. The primary outcome was pain severity, measured by Numeric pain rating scale (NPRS). All patients were followed for 1 week following enrollment. Results: The mean ages in the PNB group and control group were 58.6 and 57.4, respectively. One patient in the control group developed radiographic vasospasm. Three patients in both groups had radiographic hydrocephalus and IVH, requiring external ventricular drain (EVD) placement. The PNB group had an average reduction in mean raw pain score of 2.76 (4.68, 1.92 p = 0.024), and relative pain score by 0.26 (0.48, 0.22 p = 0.026), compared to the control group. The reduction occurred immediately after PNB administration. Conclusion: PNB can be a safe, feasible and effective treatment modality for HASH. Further investigations with a larger sample size are warranted.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Improving the Performance of DGEMM with MoA and Cache-Blocking: Preprint

The goal of this paper is to demonstrate performance enhancements of the high performance dense linear algebra matrix-matrix multiply DGEMM kernel, widely implemented by vendors in the basic linear algebra subroutine BLAS library. The mathematics of arrays (MoA) paradigm due to Mullin (1988) results in contiguous memory accesses in combination with Church-Rosser complete language constructs optimized for target processor architectures [3]. Our performance studies demonstrate that the MoA implementation of DGEMM combined with optimal cache-blocking strategies results in at least a 25% performance gain on both Intel Xeon Skylake and IBM Power-9 processors over the vendor supplied Intel MKL and IBM ESSL basic linear algebra libraries. Results are presented for the NREL Eagle and ORNL Summit supercomputers.

cache-blocking↗
DOE OSTI2022

Threaded Multi-Core GEMM with MoA and Cache-Blocking: Preprint

A threaded multi-core implementation of the high performance dense linear algebra matrix-matrix multiply GEMM kernel is described. This kernel is widely implemented by vendors in the basic linear algebra subroutine BLAS library. The mathematics of arrays (MoA) paradigm due to Mullin (1988) results in contiguous memory accesses by employing outer-product forms. Our performance studies demonstrate that the MoA implementation of double precision DGEMM combined with optimal cache-blocking strategies results in at least a 25% performance gain on the Intel Xeon Skylake processor over the vendor supplied Intel MKL basic linear algebra libraries. Results are presented for the NREL Eagle supercomputer. The multi-core DGEMM achieves over 100 GigaFlops/sec with eight openMP threads.

cache-blocking↗
DOE OSTI2024

ECAR-7813 Rev 0 Secondary Coolant Cover Gas System Stirling Engine Tube Rupture Analysis, Insulation Block Analysis, and Labyrinth Seal Design

The purpose of this ECAR is to document compliance with best engineering practices for the Secondary Coolant Cover Gas System of the MARVEL microreactor which includes a Stirling Engine helium tube rupture analysis, an analysis to verify the strength of the insulation blocks, and the design of the Labyrinth Seal.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2020

Blocking Ion Migration Stabilizes the High Thermoelectric Performance in Cu 2 Se Composites

The applications of mixed ionic–electronic conductors are limited due to phase instability under a high direct current and large temperature difference. Here, it is shown that Cu 2 Se is stabilized through regulating the behaviors of Cu + ions and electrons in a Schottky heterojunction between the Cu 2 Se host matrix and in-situ-formed BiCuSeO nanoparticles. The accumulation of Cu + ions via an ionic capacitive effect at the Schottky junction under the direct current modifies the space-charge distribution in the electric double layer, which blocks the long-range migration of Cu + and produces a drastic reduction of Cu + ion migration by nearly two orders of magnitude. Moreover, this heterojunction impedes electrons transferring from BiCuSeO to Cu 2 Se, obstructing the reduction reaction of Cu + into Cu metal at the interface and hence stabilizes the β-Cu 2 Se phase. Furthermore, incorporation of BiCuSeO in Cu 2 Se optimizes the carrier concentration and intensifies phonon scattering, contributing to the peak figure of merit ZT value of ≈2.7 at 973 K and high average ZT value of ≈1.5 between 400 and 973 K for the Cu 2 Se/ BiCuSeO composites. Here, this discovery provides a new avenue for stabilizing mixed ionic–electronic conduction thermoelectrics, and gives fresh insights into controlling ion migration in these ionic-transport-dominated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simultaneously Blocking Chemical Crosstalk and Internal Short Circuit via Gel-Stretching Derived Nanoporous Non-Shrinkage Separator for Safe Lithium-Ion Batteries

The separator, an ionic permeable and electronic insulating membrane between cathode and anode, plays a crucial role in the electrochemical and safety performance of batteries. However, the commercial polyolefin separators not only suffer from inevitable thermal shrinkage at elevated temperature, but also fail to inhibit the hidden chemical crosstalk of reactive gases such as O 2 , leading to often reported thermal runaway (TR) and hence preventing large-scale implementation of high-energy-density lithium-ion batteries. Herein, a nanoporous non-shrinkage separator (GS-PI) was fabricated via a novel gel-stretching orientation approach to eliminate TR. In situ synchrotron small angle X-ray scattering during heating clearly showed that the as-prepared thin GS-PI separator exhibits superior mechanical tolerance at high temperature, thus effectively preventing internal short circuit. Meanwhile, the unique nanoporous structure design further blocks chemical crosstalk and the associated exothermic reactions. Accelerating Rate Calorimetry test revealed that the practical 1 Ah LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622)/graphite pouch cell using GS-PI nanoporous separator show a maximum temperature rise (dT/dt max ) of only 3.7 °C s -1 compared to 131.6 °C s -1 in the case of Al 2 O 3 @PE macroporous separator. Furthermore, despite the reduced pore size, the GS-PI separator demonstrates better cycling stability than conventional Al 2 O 3 @PE separator at high temperature without sacrificing specific capacity and rate capability.

25 ENERGY STORAGE↗
DOE OSTI2022

f‐ block MOFs: A Pathway to Heterometallic Transuranics

Abstract A novel series of heterometallic f ‐block‐frameworks including the first examples of transuranic heterometallic 238 U/ 239 Pu‐metal–organic frameworks (MOFs) and a novel monometallic 239 Pu‐analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)‐MOF formation and reported the first value of a U‐to‐Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid‐state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An‐integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An‐containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.

Park, Kyoung Chul↗
DOE OSTI2022

f‐ block MOFs: A Pathway to Heterometallic Transuranics

Abstract A novel series of heterometallic f ‐block‐frameworks including the first examples of transuranic heterometallic 238 U/ 239 Pu‐metal–organic frameworks (MOFs) and a novel monometallic 239 Pu‐analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)‐MOF formation and reported the first value of a U‐to‐Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid‐state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An‐integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An‐containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.

Park, Kyoung Chul↗
DOE OSTI2025

Aqueous Self‐Assembly of Cylindrical and Tapered Bottlebrush Block Copolymers

The self‐assembly of amphiphilic bottlebrush block copolymers (BCPs), featuring backbones densely grafted with two types of side chains, is less well understood compared to linear BCPs. In particular, the solution self‐assembly of tapered bottlebrush BCPs—cone‐shaped BCPs with hydrophilic or hydrophobic tips—remains unexplored. This study investigates eight tapered and four cylindrical bottlebrush BCPs with varied ratios of hydrophobic polystyrene (PS) and hydrophilic poly(acrylic acid) (PAA) side chains, synthesized via sequential addition of macromonomers using ring‐opening metathesis polymerization (SAM‐ROMP). Self‐assembled nanostructures formed in water were analyzed using cryogenic transmission electron microscopy, small‐angle neutron scattering, and dynamic light scattering. Most BCPs generated multiple nanostructures with surface protrusions, including spherical micelles, cylindrical micelles, and vesicles, alongside transitional forms like ellipsoids and semi‐vesicles. Coarse‐grained molecular dynamics simulations supported the experimental findings, which revealed two distinct self‐assembly pathways. The first involved micelle fusion, producing elliptical and cylindrical aggregates, sometimes forming Y‐junctions. The second pathway featured micelle maturation into semivesicles, which developed into vesicles or large compound vesicles. This work provides the first experimental evidence of vesicle formation via semivesicles in bottlebrush BCPs and demonstrates the significant influence of cone directionality on self‐assembly behavior in these cone‐shaped polymeric amphiphiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Development of high‐performance partially biobased thermoset polyester using renewable building blocks from isosorbide, 1,3‐propanediol, and fumaric acid

Abstract Research on biobased thermoset resins has been overlooked when compared with the rapid progress on biobased thermoplastics. The objective of this work was to develop unsaturated polyester prepolymers based on building blocks derived from renewable raw materials, namely, biobased isosorbide, 1,3‐propanediol, and fumaric acid, with petroleum‐derived phthalic anhydride. The prepolymers developed herein behaved as low‐molecular weight macromolecules (oligoesters), with M n varying between 1.2 and 1.5 kDa, but achieved a high bio‐content of up to 87.1 wt%. The prepolymers were incorporated into reactive diluents comprising a blend of 2‐hydroxyethyl methacrylate and styrene, formulated to be eco‐friendlier and less toxic than typical styrene‐only incorporation approach, thus resulting in resins with viscosities between 750 and 950 cP. These resins are suitable for use in various fiber‐reinforced polymer production techniques, such as manual lamination, vacuum infusion, and pultrusion, having the benefit of presenting over 50 wt% of bio‐content in some formulations. Moreover, the crosslinked polyester resins (thermosets) exhibit comparable mechanical and thermomechanical behavior to their petrochemical‐based counterparts, with modulus of elasticity and tensile strength of up to 3.9 GPa and 62.1 MPa, respectively, and glass transition temperatures of up to 106°C, making them greener alternatives for high‐performance structural applications.

Hofmann, Mateus↗
DOE OSTI2021

Calorimetric Study of Functionalized Uranyl Peroxide Nanoclusters and Their Monomeric Building Block

The description of the energy landscape of polyoxometalates (POMs) enriches our understanding of their solution behavior through quantitative information that can be used to predict their existence, stability, and properties. Herein, we report thermodynamic values that describe the energy landscape of four uranyl peroxide nanoclusters (UPCs) (LiRb–U@U 24 , LiNa–U 24 Pp 12 , NaK–U 24 Pp 12 , and U 60 Ox 30 ) and a building block of UPCs, lithium uranyl triperoxide monomer (Li–UT). Furthermore, the results reveal relationships between the affinity of counter cations and the anionic uranyl peroxide units, enthalpy of dissolution, as well as enthalpy of crystallization and cluster solubility. Additionally, the calorimetric measurements of Li–UT allowed us to calculate a favorable enthalpy of formation of Li–U 24 and Li–U 28 from their monomeric units.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Oxides and Nitrides with Asymmetric Pore Structure from Block Copolymer Co–Assembly and Non–Solvent Induced Phase Separation

Materials combining an asymmetric pore structure with mesopores everywhere enable high surface area accessibility and fast transport, making them attractive for e.g., energy conversion and storage applications. Block copolymer (BCP)/inorganic precursor co-assembly combined with non-solvent induced phase separation (NIPS) provides a route to materials in which a mesoporous top surface layer merges into an asymmetric support with graded porosity along the film normal and mesopores throughout. Here, the co-assembly and non-solvent-induced phase separation (CNIPS) of poly(isoprene)-b-poly(styrene)-b-poly(4-vinylpyridine) (ISV) triblock terpolymer and titanium dioxide (TiO 2 ) sol-gel nanoparticlesare reported. Heat-treatment in air results in free-standing asymmetric porous TiO 2 . Further thermal processing in ammonia results in free-standing asymmetric porous titanium nitride (TiN). processing changes alter structural membrane characteristics is demonstrated. Changing the CNIPS evaporation time results in various membrane cross-sections ( finger-like to sponge-like). Further, oxide and nitride material composition, crystallinity, and porosity are tuned by varying thermal processing conditions. Finally, thermal processing condition effects are probed on phase-pure asymmetric nitride membrane behavior using cyclic voltammetry to elucidate their influence, e.g., on specific capacitance. Results provide further insights into improving asymmetric and porous materials for applications including energy conversion and storage, separation, and catalysis and motivate a further expansion of CNIPS to other (in)organic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dynamics of High Molecular Weight Cylindrical and Lamellar Block Copolymers with X‐ray Photon Correlation Spectroscopy

Here, the structure and dynamics of polystyrene (PS)-b-poly(ethylene oxide) block copolymers (BCPs) are studied. The BCPs exhibit microphase-separated cylindrical and lamellar morphologies. Structural dynamics are measured with X-ray photon correlation spectroscopy in the small-angle regime. Morphologies and domain sizes are evaluated using small-angle X-ray scattering (SAXS), scanning electron microscopy, and atomic force microscopy. Different solvent processing conditions are investigated. Grain sizes evaluated using SAXS are found to depend on processing only for the rubbery majority BCP. The structural relaxation times are examined as a function of PS volume fraction, temperature, morphology, and structural sizes. Well above the glass transition temperature (T g ) of PS, all samples exhibit stretched autocorrelation decays and diffusive dynamics. Near T g of PS, the dynamics of all samples are anomalous with compressed autocorrelation decays and hyperdiffusive dynamics. This transition occurs at 153 °C or 1.13 T g of PS. In the diffusive regime (at high temperature), structural relaxation times are dependent on the processing method. Near PS T g (at low temperature), structural relaxation times scale with the PS volume fraction. Structural relaxation times do not correlate with grain size, indicating that the out-of-equilibrium state of PS dominates the structural dynamics of these strongly phase-segregated BCPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reaction‐induced morphology control in block copolymers

Abstract Controlling the self‐assembly behaviors of block copolymers (BCPs) is a focal point of many research thrusts due to their broad use in various applications. While BCP molecular weight, volume fraction, and chemical identities are key thermodynamic parameters to determine their morphology, an emergent method in this area is through reaction‐induced changes to the characteristics of a BCP in situ , which provides access to multiple morphologies and domain sizes from a single parent polymer, as well as enabling the formation of metastable morphologies which may be difficult to attain otherwise. This work provides a focused review about the current state of reaction‐induced morphology control in BCPs in both solution and solid states. Furthermore, we provide a forward‐looking perspective on the future opportunities of understanding and employing reaction engineering to manipulate and advance BCP self‐assembly. © 2023 Society of Industrial Chemistry.

Robertson, Mark↗
DOE OSTI2020

Approximate inverse-based block preconditioners in poroelasticity

We focus on the fully implicit solution of the linear systems arising from a three-field mixed finite element approximation of Biot’s poroleasticity equations. The objective is to develop algebraic block preconditioners for the efficient solution of such systems by Krylov subspace methods. In this work, we investigate the use of approximate inverse-based techniques to decouple the native system of equations and obtain explicit sparse approximations of the Schur complements related to the physics-based partitioning of the unknowns by field type. Here, the proposed methods are tested in various numerical experiments including real-world applications dealing with petroleum and geotechnical engineering.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Block copolymer-mediated synthesis of TiO2/RuO2 nanocomposite for efficient oxygen evolution reaction

Abstract An amphiphilic block copolymer, poly (styrene-2-polyvinyl pyridine-ethylene oxide), was used as a structure-directing and stabilizing agent to synthesize TiO 2 /RuO 2 nanocomposite. The strong interaction of polymers with metal precursors led to formation of a porous heterointerface of TiO 2 /RuO 2 . It acted as a bridge for electron transport, which can accelerate the water splitting reaction. Scanning electron microscopy, energy-dispersive X -ray spectroscopy, transmission electron microscopy, and X -ray diffraction analysis of TiO 2 /RuO 2 samples revealed successful fabrication of TiO 2 /RuO 2 nanocomposites. The TiO 2 /RuO 2 nanocomposites were used to measure electrochemical water splitting in three-electrode systems in 0.1-M KOH. Electrochemical activities unveil that TiO 2 /RuO 2 -150 nanocomposites displayed superior oxygen evolution reaction activity, having a low overpotential of 260 mV with a Tafel slope of 80 mVdec −1 . Graphical abstract

36 MATERIALS SCIENCE↗