SEARCH · Search NASA

Results for “bulk density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Densities and mass motions in transition-zone plasmas in solar flares observed from Skylab

The electron densities and bulk motions in the transition-zone plasma of a solar flare are investigated by an analysis of EUV emission line spectra taken on Skylab. Spectra of three flares were obtained with the NRL normal incidence grating slit spectrograph in the ranges 1100-1940 and 1940-3940 A. The line ratios of transition-zone Si III lines and the intensity of the forbidden O IV 1401-A lines during flare maximum indicate electron densities on the order of 10 to the 12th/cu cm, decreasing by a factor of 2 to 3 in the flare decay phase. Line broadening of the transition-zone ions such as Si III, O IV, C IV and N V is noted, and the observed asymmetrical N V line profiles are approximated by a bi-Gaussian model of a stationary and a moving plasma component with a bulk velocity of 12 to 70 km/sec. Turbulent velocities of from 45 to 85 km/sec and from 20 to 40 km/sec are also indicated for the moving and stationary components of the transition-zone plasma, respectively.

Cheng, C.-C.↗

NASA NTRS1978

Adhesion of a bimetallic interface

The Hohenberg-Kohn and Kohn-Sham formalisms are used to examine binding (binding energy as a function of separation) for combinations of the simple metals Al(111), Zn(0001), Mg(0001), and Na(110) in contact. Similar metal contacts between Al, Zn, Mg, and Na are examined self-consistently in an ab initio calculation using the Kohn-Sham formalism. Crystallinity is included using the Aschroft pseudopotential via first order perturbation theory for the electron-ion interaction; and the ion-ion interaction is included exactly via a lattice sum. Binding energy was determined both in the local-density approximation and including gradient corrections to the exchange and correlation energy. Binding was found in all cases. In dissimilar metal contacts, interfacial bonding was greater than that in the weaker material predicting the possibility of metallic transfer. The nonzero position of the energy minimum in like metal contacts is explained in terms of consistency between the Ashcroft pseudopotential and the bulk charge density. Good agreement with experimental surface energies is obtained in the self-consistent calculation when nonlocal terms are included.

Ferrante, J.↗

NASA NTRS2012

Demonstration of Minimally Machined Honeycomb Silicon Carbide Mirrors

Honeycomb silicon carbide composite mirrors are made from a carbon fiber preform that is molded into a honeycomb shape using a rigid mold. The carbon fiber honeycomb is densified by using polymer infiltration pyrolysis, or through a reaction with liquid silicon. A chemical vapor deposit, or chemical vapor composite (CVC), process is used to deposit a polishable silicon or silicon carbide cladding on the honeycomb structure. Alternatively, the cladding may be replaced by a freestanding, replicated CVC SiC facesheet that is bonded to the honeycomb. The resulting carbon fiber-reinforced silicon carbide honeycomb structure is a ceramic matrix composite material with high stiffness and mechanical strength, high thermal conductivity, and low CTE (coefficient of thermal expansion). This innovation enables rapid, inexpensive manufacturing. The web thickness of the new material is less than 1 millimeter, and core geometries tailored. These parameters are based on precursor carbon-carbon honeycomb material made and patented by Ultracor. It is estimated at the time of this reporting that the HoneySiC(Trademark) will have a net production cost on the order of $38,000 per square meter. This includes an Ultracor raw material cost of about $97,000 per square meter, and a Trex silicon carbide deposition cost of $27,000 per square meter. Even at double this price, HoneySiC would beat NASA's goal of $100,000 per square meter. Cost savings are estimated to be 40 to 100 times that of current mirror technologies. The organic, rich prepreg material has a density of 56 kilograms per cubic meter. A charred carbon-carbon panel (volatile organics burnt off) has a density of 270 kilograms per cubic meter. Therefore, it is estimated that a HoneySiC panel would have a density of no more than 900 kilograms per cubic meter, which is about half that of beryllium and about onethird the density of bulk silicon carbide. It is also estimated that larger mirrors could be produced in a matter of weeks. Each cell is completely uniform, maintaining the shape of the inserted mandrel. Furthermore, the layup creates pressure that insures node bond strength. Each node is a composite laminate using only the inherent resin system to form the bond. This contrasts starkly with the other known method of producing composite honeycomb, in which individual corrugations are formed, cured, and then bonded together in a secondary process. By varying the size of the mandrels within the layup, varying degrees of density can be achieved. Typical sizes are 3/8 and 3/16 in. (approximately 10 and 5 millimeters). Cell sizes up to 1 in. (approximately 25 millimeters) have been manufactured. Similarly, the shape of the core can be altered for a flexible honeycomb structure.

Goodman, William↗

NASA NTRS1974

Energy and pitch angle distributions for auroral ions using the current sheet acceleration model

Using a dipole-plus-tail magnetic field model, H(+), He(+2), and O(+6) ions are followed numerically, backward in time, from an output plane perpendicular to the axis of the geomagnetic tail, to their point of entrance to the magnetosphere as solar wind particles in the magnetosheath. An adiabatic or guiding center approximation is used in regions where the particles do not interact directly with the current sheet. A Maxwellian distribution with bulk flow is assumed for solar wind particles in the magnetosheath. Bulk velocity, density, and temperature along the magnetopause are taken from the fluid calculations of Spreiter. Using Liouville's theorem, and varying initial conditions at the output plane, the distribution function is found as a function of energy and pitch angle at the output plane. These results are then mapped to the auroral ionosphere using guiding center theory.

Jaeger, E. F.↗

NASA NTRS1975

Quasi-exospheric heat flux of solar-wind electrons

Eviatar, A.↗

NASA NTRS1976

Quasi-exospheric heat flux of solar-wind electrons

Density, bulk-velocity, and heat-flow moments are calculated for truncated Maxwellian distributions representing the cool and hot populations of solar-wind electrons, as realized at the base of a hypothetical exosphere. The electrostatic potential is calculated by requiring charge quasi-neutrality and the absence of electrical current. Plasma-kinetic coupling of the cool-electron and proton bulk velocities leads to an increase in the electrostatic potential and a decrease in the heat-flow moment. If the velocities differ by the Alfven speed along the magnetic field, for example, the potential rises to 72.6 V and the heat flux falls to 0.0272 erg/sq cm per sec. In each case, the heat flux is carried mainly by the quasi-exospheric hot electrons.

Eviatar, A.↗

NASA NTRS1976

Radar characteristics of Viking 1 landing sites

Radar observations of Mars at centimeter wavelengths in May, June, and July 1976 provided estimates of surface roughness and reflectivity in three potential landing areas for Viking 1. Surface roughness is characterized by the distribution of surface landing slopes or tilts on lateral scales of the order of 1 to 10 meters; measurements of surface reflectivity are indicators of bulk surface density in the uppermost few centimeters. By these measures, the landing site at 47.5 deg W, 22.4 deg N is rougher than the Martian average, although it may be near the average for elevations accessible to Viking, and is estimated to be near the Mars average in reflectivity. The site at the center of Chryse Planitia, 43.5 deg W, 23.4 deg N, may be an area of anomalous radar characteristics, indicative of extreme, small-scale roughness, very low surface density, or a combination of these two characteristics. Observations of the original Chryse site at 34 deg W, 19.5 deg N indicate that that area is at least twice as rough as the Mars average.

Tyler, G. L.↗

NASA NTRS1980

The surface and atmosphere of Pluto

A new spectrum of Pluto in the region 1.4 to 1.9 microns provides confirmation of the presence of solid methane on the planet's surface. Considerations of the vapor pressure of methane gas above the solid indicate the presence of a tenuous atmosphere of this gas, the surface partial pressure of which is variable from perihelion to aphelion. The implication of a high surface albedo, the newly derived mass of Pluto, and inferences as to the range of plausible bulk mean densities indicate that the radius of Pluto should lie in the range 1200 to 1800 km.

Cruikshank, D. P.↗

NASA NTRS1982

Channel and physical models of the Jovian subnebula

A semiempirical physical model of the Jovian subnebula was developed by analogy with the primitive solar nebula itself. The chemical aspects of this model are developed according to the principles developed in the study of the thermochemistry and gas kinetic behavior of the solar nebula, but with important modifications to take into account the higher pressures and densities in the Jovian subnebula. The bulk compositions and densities of the inner satellites of Jupiter are calculated. It is proposed that Europa differs from Io chiefly in that in has suffered a less severe thermal history. The general features of this model are applicable with minor modification to the systems of Saturn and Uranus.

Lewis, J. S.↗

NASA NTRS1983

Comparison of spherical double probe electric field measurements with plasma bulk flows in plasmas having densities less than 1 cm-3

For a three-hour period in the magnetotail over which plasma density varied from less than 0.1 to about 1/cu cm, comparisons of ISEE-1 spherical double probe (dawn to dusk) electric field measurements and ISEE-2 plasma flows (converted to electric fields) show the zero lag cross correlation coefficient between 768 second averages of the two data sets to have been 0.93. A statistical relative uncertainty between pairs of points in the two data sets, estimated by only including counting statistics in the plasma measurement and time variations of the observed electric field over the measurement interval, is able to account for at least 75 percent of the deviations between the two data sets. In agreement with simple Langmuir probe theory, it has been found that the spacecraft potential measured over the three-hour interval by the double probe instrument varied as the log of the product of the plasma density and the square root of the electron temperature.

Mozer, F. S.↗

NASA NTRS1984

Preliminary investigation of an electrical network model for ultrasonic scattering

The behavior of acoustic attenuation in a solid is related to the electrical transmission line model where the electrical shunt conductance, which is frequency dependent, represents the loss due to the scattering sites in the solid. Results indicate that the absolute value of attenuation at a given frequency depends on both the normalized mean square deviation of the density and bulk modulus of the scattering sites from the ambient medium and the spatial scattering correlation function. Besides establishing the absolute value of attenuation, the spatial correlation function determines the attenuation profile as a function of frequency.

Maisel, J. E.↗

NASA NTRS1984

Structure of the November 12, 1978, quasi-parallel interplanetary shock

The jump in plasma parameters exhibited by the intense interplanetary shock event of Nov. 12, 1978 is analyzed using ISEE 1, 2 and 3 data. Magnetic and electric field measurements indicated that the shock magnetic field profile was similar to the earth bow shock profile. Data on the electron and proton densities, temperatures, bulk velocities and alpha particles showed a steady electron temperature increase across the shock on a 12 earth radii scale. The upstream and downstream flow parameters are found to be within 10 percent of Rankin-Hugoniot jump conditions. The shock moved at 614 km/sec and had three dissipative scales, one a few Larmor radii determined by the magnetic field jump, a second 10 earth radii correlated with the electron equilibrium and the other 30 earth radii connected to the energetic proton foreshock.

Kennel, C. F.↗

NASA NTRS1985

Superconducting magnet

Extensive computer based engineering design effort resulted in optimization of a superconducting magnet design with an average bulk current density of approximately 12KA/cm(2). Twisted, stranded 0.0045 inch diameter NbTi superconductor in a copper matrix was selected. Winding the coil from this bundle facilitated uniform winding of the small diameter wire. Test coils were wound using a first lot of the wire. The actual packing density was measured from these. Interwinding voltage break down tests on the test coils indicated the need for adjustment of the wire insulation on the lot of wire subsequently ordered for construction of the delivered superconducting magnet. Using the actual packing densities from the test coils, a final magnet design, with the required enhancement and field profile, was generated. All mechanical and thermal design parameters were then also fixed. The superconducting magnet was then fabricated and tested. The first test was made with the magnet immersed in liquid helium at 4.2K. The second test was conducted at 2K in vacuum. In the latter test, the magnet was conduction cooled from the mounting flange end.

Source record↗

NASA NTRS1987

Parabolic heavy ion flow in the polar magnetosphere

Recent observations by the Dynamics Explorer 1 satellite over the dayside polar cap magnetosphere have indicated downward flows of heavy ions such as O(+), O(2+), N(+), and N(2+) with flow velocities of the order 1 km/s (Lockwood et al., 1985). These downward flows were interpreted as the result of 'parabolic' flow of these heavy ionospheric ions from a source region associated with the polar cleft topside ionosphere. Here, a two-dimensional kinetic model is utilized to elicit features of the transport of very low energy O(+) ions from the cleft ionosphere. Bulk parameter (density, flux, thermal energies, etc.) distributions in the noon-midnight meridian plane illustrate the effects of varying convection electric fields and source energies. The results illustrate that, particularly under conditions of weak convection electric fields and weak ion heating in the cleft region, much of the intermediate altitude polar cap magnetosphere may be populated by downward flowing heavy ions. It is further shown how two-dimensional transport effects may alter the characteristic vertical profiles of densities and fluxes from ordinary profiles computed in one-dimensional steady-state models.

Horwitz, J. L.↗

NASA NTRS1987

Ion distributions in the dayside magnetosheaths of Jupiter and Saturn

Data from the Voyager 1 and 2 Plasma Science experiment in the dayside magnetosheaths of Jupiter and Saturn are analyzed. The ion distributions throughout the dayside magnetosheaths of both planets are well modeled by a two-temperature proton distribution. The two proton populations have comparable densities, and temperatures of 100 and 1000 eV. Similar two-temperature proton distributions are occasionally observed in earth's magnetosheath. Ion temperatures, densities, and bulk velocities for the four magnetosheath crossings are presented, confirming that sunward flow of up to 100 km/s occurs when the magnetosphere is expanding.

Richardson, John D.↗

NASA NTRS1989

The rate parameters for coupled rotation-vibration-dissociation phenomenon in H2

The effects of molecular rotation on coupled vibration-dissociation phenomena in H2 undergoing a nonequilibrium relaxation in a heating and cooling environment were studied theoretically. The rate coefficients for the collisional bound-bound and bound-free transitions, calculated by a quasi-classical trajectory method, were fed into the master equation, which was numerically solved to determine the rotational and vibrational population densities and bulk thermodynamic properties. Results indicate that the vibrational transition rates of H2 increase monotonically with the vibrational levels, faster than in the Landau-Teller (1936) model, and that the rotation of the molecules helps relax the low vibrational levels, serves as a temporary storage of vibrational energy during the relaxation, and thereby delays the dissociation process. The average energy loss due to the dissociation was determined to be about 80-90 percent of the total dissociation energy.

Sharma, Surendra P.↗

NASA NTRS1989

Ballistic-electron-emission microscopy of subsurface defects at the Au-GaAs(100) interface

The application of ballistic-electron-emission microscopy (BEEM) to a study of the influence of GaAs(100) substrate conditions on the formation of a multidefect structure at the Au-GaAs(100) Schottky barrier interface is described. Interfaces prepared on both melt-grown GaAs(100) wafer substrates and MBF-deposited GaAs(100) buffer layers are considered. As a comparison to the study of Au-GaAs(100) interfaces, BEEM imaging is performed on Au-Si(100) interfaces. It is noted that Au-GaAs(100) interface formation is relatively insensitive to the effects of substrate surface condition and substrate bulk defect density, and that the combination of BEEM imaging and BEEM spectroscopy indicates that the heterogeneous interface defects are the result of diffusion between the Schottky barrier electrodes.

Hecht, M. H.↗

NASA NTRS1991

The role of solar wind reconnection in driving the Neptune radio emission

The only remote diagnostic of conditions within the outer planets' magnetospheres is the highly variable flux of low-frequency radio waves. As at the other radio planets, Neptune radio emission also manifests, on a time scale of days, major intensity fluctuations that are indicative of a solar wind energy-coupling process of some kind. It is found that the merging of interplanetary magnetic field lines with Neptune's magnetosphere is the best predictor of emitted radio energy. By contrast, viscouslike energy coupling processes, such as might be caused by solar wind density or bulk speed fluctuations, are apparently ineffective in driving the radio emission.

Desch, M. D.↗