Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Mechanical properties of granular materials: A variational approach to grain-scale simulations

The mechanical properties of cohesionless granular materials are evaluated from grain-scale simulations. A three-dimensional pack of spherical grains is loaded by incremental displacements of its boundaries. The deformation is described as a sequence of equilibrium configurations. Each configuration is characterized by a minimum of the total potential energy. This minimum is computed using a modification of the conjugate gradient algorithm. Our simulations capture the nonlinear, path-dependent behavior of granular materials observed in experiments. Micromechanical analysis provides valuable insight into phenomena such as hysteresis, strain hardening and stress-induced anisotropy. Estimates of the effective bulk modulus, obtained with no adjustment of material parameters, are in agreement with published experimental data. The model is applied to evaluate the effects of hydrate dissociation in marine sediments. Weakening of the sediment is quantified as a reduction in the effective elastic moduli.

54 ENVIRONMENTAL SCIENCES↗

Defoliation‐induced compensatory transpiration is compromised in SUT4 ‐RNAi Populus

Abstract The tonoplast sucrose transporter PtaSUT4 is well expressed in leaves of Populus tremula × Populus alba (INRA 717‐IB4), and its inhibition by RNA‐interference (RNAi) alters leaf sucrose homeostasis. Whether sucrose partitioning between the vacuole and the cytosol is modulated by PtaSUT4 for specific physiological outcomes in Populus remains unexplored. In this study, partial defoliation was used to elicit compensatory increases in photosynthesis and transpiration by the remaining leaves in greenhouse‐grown poplar. Water uptake, leaf gas exchange properties, growth and nonstructural carbohydrate abundance in source and sink organs were then compared between wild‐type and SUT4 ‐RNAi lines. Partial defoliation increased maximum photosynthesis rates similarly in all lines. There was no indication that source leaf sugar levels changed differently between wild‐type and RNAi plants following partial defoliation. Sink levels of hexose (glucose and fructose) and starch decreased similarly in all lines. Interestingly, plant water uptake after partial defoliation was not as well sustained in RNAi as in wild‐type plants. While the compensatory increase in photosynthesis was similar between genotypes, leaf transpiration increased less robustly in RNAi than wild‐type plants. SUT4‐RNAi and wild‐type source leaves differed constitutively in their bulk modulus of elasticity, a measure of leaf turgor, and storage water capacitance. The data demonstrate that reduced sucrose partitioning due to PtaSUT4 ‐RNAi altered turgor control and compensatory transpiration capacity more strikingly than photosynthesis and sugar export. The results are consistent with the interpretation that SUT4 may control vacuolar turgor independently of sink carbon provisioning.

54 ENVIRONMENTAL SCIENCES↗

The Phase Transition of Zn0.854Cu0.146O Under High Pressure

Pressure induced phase transition of hexagonal Zn{sub 0.854}Cu{sub 0.146}O is studied by using synchrotron angle dispersive X-ray diffraction (ADXRD) up to 43.1 GPa at room temperature. A structural transformation from a hexagonal phase to a cubic phase is observed, which starts at 10.2 GPa and finishes at about 16.5 GPa. The phase transition leads to a volume collapse of 17% at 10.2 GPa. The cubic phase of Zn{sub 0.854}Cu{sub 0.146}O remains stable up to the highest experiment pressure. The pressure-volume data are fitted with the Birch-Murnaghan equation of state. The bulk modulus obtained upon compression from the fitting are 175(2) and 259(6) GPa for the hexagonal and cubic phases, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solidity without inhomogeneity: perfectly homogeneous, weakly coupled, UV-complete solids

Solid-like behavior at low energies and long distances is usually associated with the spontaneous breaking of spatial translations at microscopic scales, as in the case of a lattice of atoms. We exhibit three quantum field theories that are renormalizable, Poincaré invariant, and weakly coupled, and that admit states that on the one hand are perfectly homogeneous down to arbitrarily short scales, and on the other hand have the same infrared dynamics as isotropic solids. All three examples presented here lead to the same peculiar solid at low energies, featuring very constrained interactions and transverse phonons that always propagate at the speed of light. In particular, they violate the well known c$^2_L$>$\frac{4}{3}$c$^2_T$ bound, thus showing that it is possible to have a healthy renormalizable theory that at low energies exhibits a negative bulk modulus (we discuss how the associated instabilities are absent in the presence of suitable boundary conditions). We do not know whether such peculiarities are unavoidable features of large scale solid-like behavior in the absence of short scale inhomogeneities, or whether they simply reflect the limits of our imagination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Pressure Neutron Diffraction Study on H-D Isotope Effects in Brucite

A neutron powder diffraction study of hydrogenated and deuterated brucite was conducted at ambient temperature and at pressures to 9 GPa, using a Paris-Edinburgh high-pressure cell at the WAND instrument of ORNL High Flux Isotope Reactor. The two materials were synthesized by the same method and companion measurements of neutron diffraction were conducted under the same conditions. Our refinement results show that the lattice-parameters of the a axis, parallel to the sheets of Mg-O octahedra, decreases only slightly with pressure with no effect of H-D substitution. However, the c axis of Mg(OD)2 is shorter and decreases more rapidly than that of Mg(OH)2 with increasing pressure. Consequently, the unit-cell volume of deuterated brucite is slightly, but systematically smaller than that of normal brucite, which were fitted to third-order Birch-Murnaghan equation: K0=41.46 0.52 and 39.04 0.30 GPa for Mg(OH)2 and Mg(OD)2, respectively with a fixed K0 value of 10. Our results suggest that H-D substitution of brucite and other hydrous minerals with H-bonding likely influences their structural and dynamic properties under pressure, including the position of hydrogen atoms. The measured effect of H-D substitution on the unit-cell volume also demonstrates that brucite (and other hydrous minerals) preferentially incorporate deuterium over hydrogen under pressure, suggesting that the distribution of hydrogen isotopes in deep-earth conditions may differ significantly from that in near-surface environments.

08 HYDROGEN↗

High pressure raman spectroscopy and X-ray diffraction of K2Ca(CO3)2 bütschliite: multiple pressure-induced phase transitions in a double carbonate

Abstract The crystal structure and bonding environment of K 2 Ca(CO 3 ) 2 bütschliite were probed under isothermal compression via Raman spectroscopy to 95 GPa and single crystal and powder X-ray diffraction to 12 and 68 GPa, respectively. A second order Birch-Murnaghan equation of state fit to the X-ray data yields a bulk modulus, $${K}_{0}=46.9$$ K 0 = 46.9 GPa with an imposed value of $${K}_{0}^{\prime}= 4$$ K 0 ′ = 4 for the ambient pressure phase. Compression of bütschliite is highly anisotropic, with contraction along the c -axis accounting for most of the volume change. Bütschliite undergoes a phase transition to a monoclinic C 2/ m structure at around 6 GPa, mirroring polymorphism within isostructural borates. A fit to the compression data of the monoclinic phase yields $${V}_{0}=322.2$$ V 0 = 322.2 Å 3 $$,$$ , $${K}_{0}=24.8$$ K 0 = 24.8 GPa and $${K}_{0}^{\prime}=4.0$$ K 0 ′ = 4.0 using a third order fit; the ability to access different compression mechanisms gives rise to a more compressible material than the low-pressure phase. In particular, compression of the C 2/ m phase involves interlayer displacement and twisting of the [CO 3 ] units, and an increase in coordination number of the K + ion. Three more phase transitions, at ~ 28, 34, and 37 GPa occur based on the Raman spectra and powder diffraction data: these give rise to new [CO 3 ] bonding environments within the structure.

36 MATERIALS SCIENCE↗

High-pressure crystal structure and equation of state of ferromagnesian jeffbenite: implications for stability in the transition zone and uppermost lower mantle

Jeffbenite, ideally Mg 3 Al 2 Si 3 O 12 , has been identified as inclusions in super-deep diamonds originating from depths that exceed 300 km. Although Mg-end member jeffbenite has limited stability at upper-mantle conditions, iron-bearing jeffbenite may have broader P–T stability that extends to the transition zone or uppermost lower mantle, incorporating significant amounts of ferric iron. Using synchrotron-based, single-crystal X-ray diffraction (XRD) and synchrotron Mössbauer spectroscopy (SMS) at pressures up to 29 GPa, we report the crystal structure, compressibility, and likely spin transition of iron in ferromagnesian jeffbenite (Mg 2.32 Al 0.03 Fe 2+ 1.28 Fe 3+ 1.77 Si 2.85 O 12 ). High-pressure structure refinements reveal that Fe 3+ substitution for Si in the T2 site, which shares edges with the M2 octahedron, likely stabilizes jeffbenite at high pressure, because it increases the cation-to-cation distance between these sites. Although ferromagnesian jeffbenite does not undergo a structural phase transition below 30 GPa, SMS hyperfine parameters suggest the onset of an electronic spin transition of iron from high-spin (HS) to low-spin (LS) at around 22 GPa, which may increase its stability at high pressures. Pressure–volume data were fit to a third order Birch–Murnaghan equation of state, resulting in V o = 816.54(9), K To = 181.54(1.39), and K' T0 = 2.76(14). These equation of state parameters are applicable to evaluating the encapsulation pressures of super-deep diamonds. The density and bulk modulus of ferromagnesian jeffbenite are similar to or higher than pyrope–almandine, pyrope–majorite, and skiagite–majorite solid solution garnets, further suggesting that jeffbenite may be an important ferric–iron silicate in the deeper parts of the mantle transition zone and uppermost lower mantle. Furthermore, future studies on the influence of temperature and oxidation state on the stability and equations of state of iron-bearing jeffbennite are still needed to determine what role, if any, jeffbenite plays in transition-zone mineralogy.

58 GEOSCIENCES↗

Ab Initio Study of the Electronic Structure, Elastic Properties, Magnetic Feature and Thermodynamic Properties of the Ba{sub 2}NiMoO{sub 6} Material

We report first-principles calculations of the elastic properties, electronic structure and magnetic behavior performed over the Ba{sub 2}NiMoO{sub 6} double perovskite. Calculations are carried out through the full-potential linear augmented plane-wave method within the framework of the Density Functional Theory (DFT) with exchange and correlation effects in the Generalized Gradient and Local Density Approximations, including spin polarization. The elastic properties calculated are bulk modulus (B), the elastic constants (C{sub 11}, C{sub 12} and C{sub 44}), the Zener anisotropy factor (A), the isotropic shear modulus (G), the Young modulus (Y) and the Poisson ratio (υ). Structural parameters, total energies and cohesive properties of the perovskite are studied by means of minimization of internal parameters with the Murnaghan equation, where the structural parameters are in good agreement with experimental data. Furthermore, we have explored different antiferromagnetic configurations in order to describe the magnetic ground state of this compound. The pressure and temperature dependence of specific heat, thermal expansion coefficient, Debye temperature and Grüneisen parameter were calculated by DFT from the state equation using the quasi-harmonic model of Debye. A specific heat behavior C{sub V} ≈ C{sub P} was found at temperatures below T = 400 K, with Dulong–Petit limit values, which is higher than those, reported for simple perovskites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A DFT Study on Structural, Electronic Mechanical and Thermodynamic Properties of 5f-Electron System BaAmO{sub 3}

The structural, electronic, mechanical and thermodynamic properties of the perovskite oxide BaAmO{sub 3} have been predicted using the full-potential linearized augmented plane wave (FP-LAPW) method. The equilibrium lattice constant, bulk modulus and pressure derivative were computed using different exchange correlations. The optimization of structure was carried out in ferromagnetic, anti-ferromagnetic and non-magnetic states, and the compound was found to be stable in the ferromagnetic state. A systematic study on the band structure and density of states was accomplished using generalized gradient approximation (GGA), Hubbard approximation (GGA + U) and modified Becke–Johnson exchange potential (mBJ),and the compound was found to have a half-metallic nature in all the approximations. The calculated total spin magnetic moment was found to be 5 μ{sub B} in all the approximations used. The second-order elastic constants, Young modulus, shear modulus, Poisson ratio and anisotropic factor have also been calculated. In order to have a complete understanding of BaAmO{sub 3}, the thermodynamic properties were studied in the pressure range of 0 to 40 GPa and the temperature range extending from 0 to 600 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effects of Ru and Rh Substitutions on the Magneto-electronic and Optical Properties of the TbNi{sub 5} Intermetallic Compound: An Ab Initio Investigation

In this study, we have performed the first-principles investigation of the structural, electronic, magnetic, and optical properties of TbNi{sub 5}, TbNi{sub 3}Ru{sub 2}, and TbNi{sub 3}Rh{sub 2} compounds. The full-potential linearized augmented plane waves with local orbitals method is used in the framework of density functional theory (DFT) employing the generalized gradient approximation (GGA) for the exchange correlation functional as implemented in WIEN2k package. The structural properties are reposed on the evaluation of the equilibrium lattice parameters of these compounds under hexagonal structure such as lattice constants (a and c), bulk modulus (B), and its first pressure derivative (B{sup ′}). The spin-polarized electronic structures, including band structure and density of states, are calculated employing the GGA plus band correlated Hubbard parameter (GGA + U) scheme. The results show that density of states and magnetic moment of the pure TbNi{sub 5} compound are changed by doping. These changes are observed in the appearance of additional peaks on the spectral density of states (DOS) and in the augmentation of the total magnetic moment of TbNi{sub 3}X{sub 2} (X = Ru and Rh) intermetallic compounds. Based on the electronic structure results, the frequency dependents of optical conductivity are estimated in all the spectra and interpreted in the interband optical absorption part.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Temperature and Pressure on Structural and Magnetic Properties of Strontium-Filled Skutterudites SrT{sub 4}Sb{sub 12}: LDA and LSDA Calculations

The structural, elastic, thermodynamic, magnetic, and electronic properties of strontium-filled skutterudite component SrFe{sub 4}Sb{sub 12} using the full potential-linear muffin-tin orbital (FP-LMTO) calculation were studied. The local density approximation (LDA) and local spin density approximation (LSDA) for predicting the physical properties were used. The internal parameters used to calculate the ground state properties such as lattice constant, bulk modulus, and its derivative pressure were optimized. Then, we have deduced the elastic constants, shear modulus G, Young modulus E, Poisson’s ratio ν, anisotropic parameter A, ratio B/G, and the Debye temperature (𝜃{sub D}). The quasi-harmonic Debye model as implemented in the Gibbs program is applied to determine the thermal properties such as the Debye temperature (𝜃{sub D}), heat capacity C{sub v} and C{sub p}, thermal expansion coefficient α Helmholtz free energy (A), Gibbs free energy (G), entropy (S) and internal energy (U) at different pressures and temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Structural, Electronic, Magnetic, and Optical Properties of Mn{sub 2}ZrGa{sub 1−x}Ge{sub x} Heusler Alloys: First-Principles Calculations

The structural, electronic, magnetic, and optical properties of Mn-based Heusler Mn{sub 2}ZrGa{sub 1−x}Ge{sub x} (x = 0, 0.25, 0.5, 0.75, and 1) alloys are calculated by first-principles full-potential linearized augmented plane wave plus local orbital (FP-LAPW+lo) method. It is found that Mn{sub 2}ZrGa{sub 1−x}Ge{sub x} alloys are half-metallic ferrimagnetic and their magnetic moments are in good agreement with the Slater–Pauling relationship. The calculations reveal that all alloys have a pseudo-gap in the majority-spin channel except for x = 0.75 and x = 1 which have a real gap in the majority-spin channel. The spin polarization is quite large for whole series, and it reaches to a value of 100% for x = 0.75 and x = 1. Our calculated results clearly show that with the Ge substitution, the lattice parameter linearly decreases while the bulk modulus increases. Moreover, the calculated formation energies confirm that these alloys are stable chemically. The optical properties, including the real and imaginary parts of the dielectric function, reflectivity, and absorption spectra, were also investigated. The results show that the dominant behavior, at energy below 1 eV, is due to interactions of free electrons in the system. The increment of Ge concentration leads to an increase in the plasma frequency of metallic spin channel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Magnetic, and Optoelectronic Properties of CuMnSe{sub 2}-Chalcopyrite: DFT + U and Hybrid Functional Investigation

The work presented in this manuscript is a study of structural, magnetic, and optoelectronic properties of CuMnSe{sub 2}-chalcopyrite by FP-(L)APW + lo method using semilocal and hybrid functional. Structural properties such as cell parameters, bulk modulus, and its pressure derivative, as well as the cohesive energy and total energy of the unit cell were determined for the three magnetic phases (AFM, FM, and NM) from which it has been found that CuMnSe{sub 2}-chalcopyrite is ferromagnetic. The studied elastic properties confirm the mechanical stability of CuMnSe{sub 2} in its chalcopyrite structure. Electronic properties, such as the band gap energy, density of states, and charge density, and magnetic properties, such as Hubbard term estimation, magnetic moment, and polarization of the CuMnSe{sub 2}, have been predicted by several methods (GGA-PBEsol + U{sub eff}, GGA-PBEsol-(mBJ) + U{sub eff}, and hybrid functional). Optical properties such as the analysis of the dielectric function and the prediction of the refractive index and birefringence variations were also studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical Study of Structural, Magnetic, Elastic, Phonon, and Thermodynamic Properties of Heusler Alloys Fe{sub 2}CrX (X = Al, Ga)

First-principle calculations based on generalized gradient approximation and quasi-harmonic Debye model were executed to analyze the structural, magnetic, elastic, phonon, and thermodynamic properties of Fe{sub 2}CrX (X = Al, Ga) Heusler alloys. The computed lattice parameters concurred well with available experimental and theoretical data. The calculated elastic constants reveal that the Fe{sub 2}CrAl is brittle and Fe{sub 2}CrGa is ductile. The phonon dispersion relation of Fe{sub 2}CrX (X = Al, Ga) are calculated using finite displacement method with a cutoff radius of 5 Å. We likewise explored the thermodynamic properties by utilizing quasi-harmonic Debye model in which bulk modulus, heat capacity, Debye temperature, Grüneisen parameter, and thermal expansion coefficient are resolved at 0–30 Gpa pressure and 0–900 K temperature from the non-equilibrium Gibbs functions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phonon and Thermodynamic Properties in YNi{sub 2}B{sub 2}C and LuNi{sub 2}B{sub 2}C from First-Principles Study

The thermodynamic properties of the tetragonal RNi{sub 2}B{sub 2}C (R=Y, Lu) are investigated by means of the density-functional theory (DFT) and density-functional perturbation theory (DFPT) within the quasiharmonic approximation (QHA). The phonon dispersion curves and phonon total and partial density of states are studied, and it is found that the phonon branches can be divided into three obvious regions: a low-frequency region (LFR), an intermediate-frequency region (IFR), and a high-frequency region (HFR). The temperature dependence of the various quantities including isothermal bulk modulus, thermal expansion coefficient, and heat capacity is obtained, and the variation features of these quantities with temperature are discussed in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical Investigation of the Mechanical and Thermodynamic Properties of the Layered Yttrium Diborocarbides

The mechanical, electronic, and thermodynamic properties of typical layered structure yttrium diborocarbides (YB{sub 2}C{sub 2}) were investigated by the density functional theory. The calculated lattice constants were slightly higher than the available experimental data. The elastic constants revealed that YB{sub 2}C{sub 2} was mechanically stable. The bulk modulus (190.8 GPa), shear modulus (127.4 GPa), Young’s modulus (312.7 GPa), Poisson’s ratio (0.227), and Vickers hardness (18–19 GPa) were obtained, and the ductility, plasticity, and elastic anisotropy were further analyzed. The total and partial density of states were also calculated, indicating that the metallic character was mainly attributed to the contribution from Y-4d states and weakly hybridized with the 2p states from the B and C atoms. Finally, we obtained the Debye, melting, and the superconducting transition temperatures of YB{sub 2}C{sub 2} as 824, 2239 and 2.38 K, respectively. Our study showed that YB{sub 2}C{sub 2} offers potential in superconductivity or ultrahigh temperature applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of Structural, Electronic, and Magnetic Properties of Cubic Lanthanide Based on Oxide Perovskite-Type NdGaO{sub 3}

Based on the density functional theory (DFT), the full-potential linearized augmented plane wave with local orbital (FP-L/APW+lo) technique is now employed in this approach to understand the structural, electronic, and magnetic properties of simple cubic oxide perovskite NdGaO{sub 3} compound. In all this investigation, the exchange-correlation (XC) energy is selected in the framework of spin-polarized generalized gradient approximation (spin-GGA). The structural analysis unveils that the ferromagnetic (FM) phase is the stable ground state of the cubic NdGaO{sub 3} compound, where the equilibrium lattice parameters (lattice constant (a{sub 0}), bulk modulus (B{sub 0}), and its first pressure derivative (B′)) are determined in both FM and paramagnetic (PM) phases. The spin-polarized electronic properties (band structure and density of states) of the cubic NdGaO{sub 3} oxide perovskite are studied under the platform of equilibrium lattice parameters; this investigation demonstrates the half-metallic behavior of the studied cubic NdGaO{sub 3} compound because the spin-up case displays the metallic nature, whereas the semiconducting character is observed in spin-down case. The magnetic properties reveal that the total magnetic moment of the cubic NdGaO{sub 3} compound is equal to 3 μ{sub B} and its contribution is mostly generated by Nd atoms, whereas feeble local magnetic moments are installed in non-magnetic Ga and O sites. Through the electronic and magnetic results, we conclude that the cubic perovskite NdGaO{sub 3} compound is classified as a half-metallic ferromagnetic material.

36 MATERIALS SCIENCE↗

Poroelastic Response of Orthotropic Fractured Porous Media

In this paper, an algorithm is presented for inverting either laboratory or field poroelastic data for all the drained constants of an anisotropic (specifically orthotropic) fractured poroelastic system. While fractures normally weaken the system by increasing the mechanical compliance, any liquids present in these fractures are expected to increase the stiffness somewhat, thus negating to some extent the mechanical weakening influence of the fractures themselves. The analysis presented in this article quantifies these effects and shows that the key physical variable needed to account for the pore-fluid effects is a factor of (1 - B), where B is Skempton’s second coefficient and satisfies 0 ≤ B < 1. This scalar factor uniformly reduces the increase in compliance due to the presence of communicating fractures, thereby stiffening the fractured composite medium by a predictable amount. One further aim of the discussion is to determine the number of the poroelastic constants that needs to be known by other means to determine the rest from remote measurements, such as seismic wave propagation data in the field. Quantitative examples arising in the analysis show that, if the fracture aspect ratio a f ≃ 0.1 and the pore fluid is liquid water, then for several cases considered, Skempton’s B ≃ 0.9, and so the stiffening effect of the pore-liquid reduces the change in compliance due to the fractures by a factor 1-B ≃ 0.1, in these examples. The results do, however, depend on the actual moduli of the unfractured elastic material, as well as on the pore-liquid bulk modulus, so these quantitative predictions are just examples, and should not be treated as universal results. Attention is also given to two previously unremarked poroelastic identities, both being useful variants of Gassmann’s equations for homogeneous—but anisotropic—poroelasticity. Relationships to Skempton’s analysis of saturated soils are also noted. Finally, the article concludes with a discussion of alternative methods of analyzing and quantifying fluid-substitution behavior in poroelastic systems, especially for those systems having heterogeneous constitution.

54 ENVIRONMENTAL SCIENCES↗