Search NASA⌕ Search

SEARCH · Search NASA

Results for “buried”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Gain saturation in semiconductor lasers - Theory and experiment

The semiconductor stimulated gain saturation model of Zee has been extended using reasonable approximations to obtain an analytical solution for the gain saturation process in PbSnTe and to determine the limit to single mode power directly from the gain expression, the intraband relaxation time, and device and material parameters. The theoretical results are compared with experimental observations for single transverse mode cavity narrow stripe buried heterostructure PbSnTe lasers. Those results are interpreted in terms of an intraband relaxation time on the order of 2 x 10 to the -12th s in the temperature range 20-80 K.

Kasemset, D.↗

Schiaparelli Basin, Mars - Morphology, Tectonics and infilling history

Schiaparelli Basin (an elliptical basin 460 x 400 km in diameter) is the best preserved large impact structure on Mars. Multiple periods of basin infilling by lava and eolian material can be recognized. Numerous ridges within the basin show a strong northwest-southeast orientation, consistent with a regional stress field induced by the loading of the lithosphere by Tharsis. Ridge location is, however, apparently dominated by a buried peak ring. Earth-based radar measurements of Schiaparelli indicate that the ejecta deposits are best preserved on topographic highs southeast of the basin, while eolian materials have preferentially accumulated in the lower (western) side of the basin. Lyot (215 km diameter) is believed to be a good analogue to the pre-infilled Schiaparelli, and indicates that Schiaparelli probably had an initially hummocky floor topography and both ballistic and ground-flow ejecta deposits.

Mouginis-Mark, P. J.↗

The flux ejection dynamo with small diffusivity. I - Basic properties. II - Illustrative examples

In the first part of this paper, the flux ejection dynamo in an infinitely broad convective layer of finite depth is treated in the limit of electrical conductivity, where the convective layer upper surface is open to empty space while the lower surface is closed to the passage of fluid and field. The idealized convective overturning used allows an exact description of the symmetry and distribution of the magnetic field carried with the fluid. The total flux of the mean horizontal field grows linearly with the number of convective cycles. A discussion is given of the boundary conditions to be applied to an astronomical body whose flux ejection dynamo operates at its surface. In the second part, examples are presented which illustrate the consequences of reverse flux ejection from the surface of a convective layer of conducting fluid. Reverse flux ejection generally has the opposite effect of magnetic buoyancy, burying the fields rather than bringing them through the surface. Reverse flux injection at the surface of an alpha-omega dynamo profoundly alters the character of the solutions of dynamo equations.

Parker, E. N.↗

The negative gravity field over the 85 deg E ridge

Two north-south ridges in the basement topography of the Bay of Bengal may be observed on an isopach map at 85 and at 90 deg E. Free-air gravity anomaly profiles across the region show a strong gravity low (about -60 mGal) over the 85 deg E ridge, and a gravity high over the other. Using a simple two-stage loading model, the negative gravity anomaly over the 85 deg E ridge is explained as a direct consequence of sediment loading, and the flexural rigidity of the lithosphere when the ridge was formed is estimated to have been about 180 times less than the flexural rigidity during the sediment loading. An approximate relationship between flexural rigidity and crustal age shows that the 85 deg E ridge was formed on relatively young lithosphere, 5-15 million years old, and that it was buried when the lithosphere was 40-80 million years old. The alteration of the gravity field by a thick layer of sediments may occur in other large sedimentary basins or along continental margins.

Liu, C.-S.↗

Heat generation in aircraft tires under free rolling conditions

A method was developed for calculating the internal temperature distribution in an aircraft tire while free rolling under load. The method uses an approximate stress analysis of each point in the tire as it rolls through the contact patch, and from this stress change the mechanical work done on each volume element may be obtained and converted into a heat release rate through a knowledge of material characteristics. The tire cross-section is then considered as a body with internal heat generation, and the diffusion equation is solved numerically with appropriate boundary conditions of the wheel and runway surface. Comparison with data obtained with buried thermocouples in tires shows good agreement.

Clark, S. K.↗

Impact of Mount St. Helens eruption on hydrology and water quality

The 1980 eruptions of Mount St. Helens in southeast Washington resulted in a pronounced effect on the surface and ground water resources of the state. In response to the volcanic activity, the U.S. Geological Survey intensified statewide surface and ground water sampling programs to determine the nature and magnitude of the volcanic-induced variations. Streams to the east of Mount St. Helens received the major ash fallout. Chemical effects were best noted in smaller streams sampled 60 to 70 miles northeast of Mount St. Helens. The chemical variations observed were pronounced but short lived. Sulfate and chloride increases in anionic composition were prevalent immediately following the eruption; however, the original bicarbonate predominance was again attained within several days. Suspended iron and aluminum concentrations were similarly elevated during the period of greatest ash deposition (highest turbidity); however, the dissolved concentrations remained relatively constant. Depressions of pH were minor and short lived. Streams draining to the south, tributaries to the Columbia river, showed little observable changes in water chemistry. Streams draining to the west (Toutle river and its tributaries) were compositionally affected by the various volcanic activities. Chloride and sulfate anion percentage exceeded the bicarbonate percentage up to one month following the eruption period. Streams and lakes sampled in the immediate vicinity of Mount St. Helens, in addition to trace metals, contained organic compounds derived from decomposing wood buried in the debris deposits. This organic material may constitute a significant source of organic compounds to surface and ground water for some time to come.

Bonelli, J. E.↗

Heat generation in aircraft tires

A method was developed for calculating the internal temperature distribution in an aircraft tire while free rolling under load. The method uses an approximate stress analysis of each point in the tire as it rolls through the contact patch, and from this stress change the mechanical work done on each volume element may be obtained and converted into a heat release rate through a knowledge of material characteristics. The tire cross-section is then considered as a body with internal heat generation, and the diffusion equation is solved numerically with appropriate boundary conditions of the wheel and runway surface. Comparison with data obtained with buried thermocouples in tires shows good agreement.

Clark, S. K.↗

Solution of naturally-ocurring glasses in the geological environment

As part of a study to investigate the feasibility of putting nuclear wastes in glass containers and burying them on land or dumping them in the ocean, the amount of solution experience by naturally occurring glasses from two land sites and thirty-four deep sea sites was studied. The glasses are microtektites from three strewn fields and from the Zhamanshin impact crater. The microtektites range in age from 0.7 to 35 m.y. and have a wide range in composition. The weight percent SiO2, for example, ranges from 44.8 to 81.7. Although several criteria for determining the amount of solution were considered, most of the conclusions are based on two criteria: (1) width of cracks, and (2) elevation of silica rich inclusions above the adjacent microtektite surface. All the measurements were made on scanning electron microscope photomicrographs of the microtektites.

Glass, B. P.↗

High speed multi focal plane optical system

An apparatus for eliminating beamsplitter generated optical aberrations in a pupil concentric optical system providing a plurality of spatially separated images on different focal planes or surfaces is presented. The system employs a buried surface beamsplitter having spherically curved entrance and exit faces which are concentric to a system aperture stop with the entrance face being located in the path of a converging light beam directed there from an image forming objective element which is also concentric to the aperture stop.

Minott, P. O.↗

Subsurface valleys and geoarcheology of the eastern Sahara revealed by Shuttle radar

Previously unknown buried valleys, geologic structures, and possible Stone Age occupation sites have been revealed through the Shuttle Imaging Radar (SIR-A) penetration of the extremely dry Selima Sand Sheet, dunes and drift sand of the eastern Sahara. Radar penetration of dry sand and soils varies with the wavelength of the incident signals, which is 24 cm for the SIR-A system, as well as incidence angle and electrical properties of the material which are largely determined by moisture content. The calculated depth of radar penetration of dry sand and granules has been established to be 5 m on the basis of laboratory measurements of Selima Sand Sheet sample electrical properties. September 1982 field studies in Egypt have verified SIR-A signal penetration depths of at least 1 m in the Selima Sand Sheet and drift sand, and 2 m or more in sand dunes.

Mccauley, J. F.↗

Martian volcanic materials - Preliminary thickness estimates in the eastern Tharsis region

Mars displays a variety of volcanic materials from high standing constructs to smooth plains. These materials are evaluated in terms of their susceptibility to thickness determination, and a representative area is analyzed. The Martian ridged plains are much like lunar maria in both surface expression and apparent mode of emplacement. Flooded craters within the ridged plains materials provide an estimate of the thickness distribution. In the Tharsis region, ridged plains materials occur as part of the layered sequence on the east flank of the Tharsis dome. Partially buried craters indicate that the ridged plains materials range from zero meters thick at their eastern limit to over 1.5 km thick westward on the flank of the dome where they are overlain by younger materials. These materials are responsible for only a small portion of the total relief of the Tharsis dome.

De Hon, R. A.↗

Tharsis volcanoes - Separation distances, relative ages, sizes, morphologies, and depths of burial

Network analysis indicates the separation distances of the Tharsis volcanoes to be 700 to 900 km; this is considered to be the thickness of the Tharsis thermal lithosphere or 'tectosphere' which has thickened with time. Although as a whole the Tharsis volcanoes exhibit a random distribution, preferential alignments emerge when the history of the region is divided into separate periods. The preferential alignments mimic those of fractures in the surrounding terrain. Photogeologic and morphometric data indicate that the volcanoes fall into four distinct classes: montes, tholi, paterae, and a class whose sole representative is Alba Patera. The volcanoes have been buried by lava up to about 4 km in thickness. The sizes of the volcanoes directly correlate with their separation distances from their nearest neighbors. It is concluded that the greater the lithosphere thickness, the larger will be the volcano and the greater its separation distance from its nearest neighbor.

Whitford-Stark, J. L.↗

Beginning and end of lunar mare volcanism

The distribution and characteristics of the early phases of mare vulcanism on the moon are discussed. Breccias have been observed that indicate the presence of magma flows before 3900 Myr BP. A mafic feature has been identified in more than 100 craters at least 1 km across. The absence of buried mare surfaces on the nearside and western hemispheres is attributed to ejecta deposits, and farside basins with no mare fill are suggested to have experienced early mare flooding. Photographs of the bright-rayed Lichtenberg crater have revealed that mare volcanism occurred within the time frame 1700-2000 Myr BP. It is concluded that the moon featured two periods of igneous activity, the last happening at 1000 Myr BP, and beginning 4300 BP.

Schultz, P. H.↗

Spanwise mass transfer variations on a cylinder in 'nominally' uniform crossflow

Mass transfer experiments on a circular cylinder in a 'nominally' uniform crossflow are described. Experiments were conducted at the tunnel's turbulence level and with a woven-wire turbulence screen. In both cases spanwise and circumferential mass transfer measurements were made. Without the turbulence screen, the results were found to be spanwise independent and agreed quite well with both theory and the result of others. In addition to the mass transfer measurements, spanwise traverse measurements of the mean velocity and turbulence quantities in the incident flow were made and showed that the screen produced a small-amplitude spanwise periodic perturbation in the incident flow. Although this perturbation was only one quarter of a percent in the mean velocity and buried in the stream's turbulence, disproportionately large spanwise variations of 15 percent were found in the mass transfer rate.

Mayle, R. E.↗

Evaluation of thermal data for geologic applications

Sensitivity studies using thermal models indicated sources of errors in the determination of thermal inertia from HCMM data. Apparent thermal inertia, with only simple atmospheric radiance corrections to the measured surface temperature, would be sufficient for most operational requirements for surface thermal inertia. Thermal data does have additional information about the nature of surface material that is not available in visible and near infrared reflectance data. Color composites of daytime temperature, nighttime temperature, and albedo were often more useful than thermal inertia images alone for discrimination of lithologic boundaries. A modeling study, using the annual heating cycle, indicated the feasibility of looking for geologic features buried under as much as a meter of alluvial material. The spatial resolution of HCMM data is a major limiting factor in the usefulness of the data for geologic applications. Future thermal infrared satellite sensors should provide spatial resolution comparable to that of the LANDSAT data.

Kahle, A. B.↗

Impact basins and the volcanics of Mars

The distribution fracture patterns of old Martian impact basins were studied. The basaltic plains on the Moon generally occur inside or around impact craters and basins and it is believed that fractures generated by large impacts provided long lasting pathways for magmas. The volcanic plains and volcanic edifices on Mars which show a complex distribution are the interiors of the most obvious old basins are largely buried by wind blown deposits. The Martian ridged plains that most resemble the lunar maria typically are offset from such impact basins. The origin of the mare like plains offset and the placement of the large volcanic mountains are discussed.

Schultz, P. H.↗

Dual aperture multispectral Schmidt objective

A dual aperture, off-axis catadioptic Schmidt objective is described. It is formed by symmetrically aligning two pairs of Schmidt objectives on opposite sides of a common plane (x,z). Each objective has a spherical primary mirror with a spherical focal plane and center of curvature aligned along an optic axis laterally spaced apart from the common plane. A multiprism beamsplitter with buried dichroic layers and a convex entrance and concave exit surfaces optically concentric to the center of curvature may be positioned at the focal plane. The primary mirrors of each objective may be connected rigidly together and may have equal or unequal focal lengths.

Minott, P. O.↗

Drainage Evolution in the Debris Avalanche Deposits Near Mount Saint Helens, Washington

The 18 May 1980 eruption of Mount St. Helens was initiated by a massive rockslide-debris avalanche which completely transformed the upper 25 km of the North Fork Toutle River valley. The debris was generated by one of the largest gravitational mass movements ever recorded on Earth. Moving at an average velocity of 35 m/s, the debris avalanche buried approximately 60 sq km of terrain to an average depth of 45 m with unconsolidated, poorly sorted volcaniclastic material, all within a period of 10 minutes. Where exposed and unaltered by subsequent lahars and pyroclastic flows, the new terrain surface was characterized predominantly by hummocks, closed depressions, and the absence of an identifiable channel network. Following emplacement of the debris avalanche, a complex interrelationship of fluvial and mass wasting processes immediately began operating to return the impacted area to an equilibrium status through the removal of material (potential energy) and re-establishment of graded conditions. In an attempt to chronicle the morphologic evolution of this unique environmental setting, a systematic series of interpretative maps of several selected areas was produced. These maps, which document the rate and character of active geomorphic processes, are discussed.

Gary L Beach↗