Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Fabrication and Characterization of Iron-Based Catalysts for the Dehydrogenation of Fossil Fuels

For a prosperous and sustainable future, hydrogen is an encouraging solution due to its simple transition for industrial decarbonization and synergy for economic development. Paradoxically, current hydrogen production pathways release substantial amount of greenhouse gases into the atmosphere contributing to climate change. To keep up with increasing demand, hydrogen could be produced through microwave-assisted thermocatalytic dehydrogenation of fossil fuels without emitting carbon dioxide. This requires specified catalysts to meet the requirements of hydrogen yield and selectivity. The objective of the present research is to fabricate, characterize, and compare iron-based alumina (FeAlxOy) catalysts produced via solution combustion synthesis and iron-based catalysts on silicon carbide support (Fe/SiC) produced via incipient wetness impregnation. Heat mode, fuel type, and oxidizer mole ratio were varied for FeAlxOy catalysts, and metal loading was varied for Fe/SiC catalysts. Each resultant product was characterized by X-ray diffraction analysis, scanning electron microscopy, laser diffraction particle size analysis, and Brunauer-Emmett-Teller (BET) surface area analysis. Characterization suggests that fabrication of iron-based alumina nanocomposites through solution combustion synthesis in a muffle furnace using citric acid as the fuel yields the most promising catalyst.

Reyes, Victoria Isabel↗

Volcano‐like Activity Trends in Au@Pd Catalysts: The Role of Pd Loading and Nanoparticle Size

The addition of palladium (Pd) to preformed gold nanoparticles (Au NPs) enables the formation of core‐shell structures with enhanced catalytic performance in oxidation reactions. However, predicting the precise palladium content required to achieve maximum catalytic activity remains difficult based on current understanding. Herein, Pd was systematically introduced onto titania‐supported Au NPs (2, 6, and 10 nm) to evaluate their performance in benzyl alcohol oxidation. A volcano‐like trend in catalytic activity was observed, where activity increased with Pd addition, peaked, and then declined. The Pd loading required for maximum activity depended on Au NP size: ≈40 at% Pd/Au for 2.6 nm, ≈20 at% Pd/Au for 6.4 nm, and ≈12.5 at% Pd/Au for 10.6 nm. For Au NPs > 6 nm, peak activity aligned with monolayer Pd coverage, while for smaller NPs (2–3 nm), optimal Pd content was below monolayer predictions. X‐ray absorption spectroscopy revealed a core‐shell structure at low Pd content, but higher Pd loadings led to Pd diffusion into the Au core. This structural transformation likely caused activity decline, indicating that AuPd alloying negatively impacts catalysis. These results highlight that core‐shell Au@Pd catalysts outperform AuPd alloys and provide crucial insights for designing highly active bimetallic catalysts.

X-ray absorption spectroscopy↗

Six-flow operations for catalyst development in Fischer-Tropsch synthesis: Bridging the gap between high-throughput experimentation and extensive product evaluation

Design and operation of a “six-flow fixed-bed microreactor” setup for Fischer-Tropsch synthesis (FTS) is described. The unit consists of feed and mixing, flow division, reaction, separation, and analysis sections. The reactor system is made of five heating blocks with individual temperature controllers, assuring an identical isothermal zone of at least 10 cm along six fixed-bed microreactor inserts (4 mm inner diameter). Such a lab-scale setup allows running six experiments in parallel, under equal feed composition, reaction temperature, and conditions of separation and analysis equipment. It permits separate collection of wax and liquid samples (from each flow line), allowing operation with high productivities of C5+ hydrocarbons. The latter is crucial for a complete understanding of FTS product compositions and will represent an advantage over high-throughput setups with more than ten flows where such instrumental considerations lead to elevated equipment volume, cost, and operation complexity. The identical performance (of the six flows) under similar reaction conditions was assured by testing a same catalyst batch, loaded in all microreactors.

36 MATERIALS SCIENCE↗

Correlating the degree of metal–promoter interaction to ethanol selectivity over MnRh/CNTs CO hydrogenation catalysts

Multi-walled carbon nanotubes (MCNTs) were used as a support for Rh-based catalysts for high pressure (20 bar) CO hydrogenation. 3 wt% Rh/CNTs catalysts were loaded with 1 wt% and 2 wt% Mn promoter, respectively, in order to study the effect of metal–promoter interactions for ethanol synthesis. Both STEM and EXAFS results showed ≈1 nm Rh particles in promoted as well as the unpromoted catalysts, STEM and EELS results verified the enhanced metal–promoter interaction when the amount of Mn promoter increased from 1 wt% to 2 wt%. The enhancement in the degree of metal–promoter interaction leads to an increase in the ethanol selectivity. Moreover, due to the nature of CNTs (low Z number), the Mn–Rh interactions could be observed at atomic resolution during the STEM–EELS characterization, and the promoter phase is confirmed as Mn(II) oxide by XANES and EELS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heterogeneous photo-Fenton-like degradation of emerging pharmaceutical contaminants in wastewater using Cu-doped MgO nanoparticles

In this study, a facile thermal decomposition method was utilized to synthesize Cu-doped MgO nanoparticles possessing mesoporosity. These mesoporous Cu doped MgO nanoparticles were shown to be efficient photo-Fenton-like catalysts for the degradation of emerging pharmaceutical contaminants in wastewater and were able to completely oxidize salicylic acid within 1 hour under optimized conditions. Tetracycline was shown to be converted to other intermediates with a large portion of it undergoing full mineralization. Batch experiments were conducted to demonstrate the effects of Cu loading on MgO, overall catalyst loading, and H 2 O 2 concentration on the salicylic acid and tetracycline conversion and rate constants. Quenching experiments revealed that both •OH radicals or HO 2 •/•O 2 - radicals were involved in the reaction, with the latter showing a higher contribution. The surface dissolution of MgO was shown to facilitate a high pH environment which completely prevented Cu from leaching out of the catalyst while retaining high activity. The catalyst reusability was shown to be satisfactory with high activity and conversion being preserved over five cycles.

04 OIL SHALES AND TAR SANDS↗

Microwave-assisted, performance-advantaged electrification of propane dehydrogenation

Nonoxidative propane dehydrogenation (PDH) produces on-site propylene for value-added chemicals. While commercial, its modest selectivity and catalyst deactivation hamper the process efficiency and limit operation to lower temperatures. We demonstrate PDH in a microwave (MW)–heated reactor over PtSn/SiO 2 catalyst pellets loaded in a SiC monolith acting as MW susceptor and a heat distributor while ensuring comparable conditions with conventional reactors. Time-on-stream experiments show active and stable operation at 500°C without hydrogen addition. Upon increasing temperature or feed partial pressure at high space velocity, catalysts under MWs show resistance in coking and sintering, high activity, and selectivity, starkly contrasting conventional reactors whose catalyst undergoes deactivation. Mechanistic differences in coke formation are exposed. Gas-solid temperature gradients are computationally investigated, and nanoscale temperature inhomogeneities are proposed to rationalize the different performances of the heating modes. The approach highlights the great potential of electrification of endothermic catalytic reactions.

42 ENGINEERING↗

Reducing Coke and Increasing Bio-Oil Yield during Catalytic Fast Pyrolysis of Biomass Using Phosphorus-Modified Zeolite Catalysts

Catalytic fast pyrolysis (CFP) is a promising strategy for producing hydrocarbon transportation fuels from biomass feedstocks. However, catalyst development is needed to increase bio-oil yields and enhance process economics. In this work, we demonstrate how post synthetic modification of formed ZSM-5 with phosphorus shifts CFP selectivity from coke and light gases toward the desired bio-oil product. Microscale experiments demonstrated reduced coke production relative to unmodified ZSM-5 and identified an optimal P loading. Extensive catalyst characterization revealed that P interacted with Al sites to reduce the acid site density, with preferential binding to the strongest acid sites. Insights from the microscale experiments were leveraged to produce kilogram quantities of formed P-ZSM-5 for evaluation in a larger semi-integrated process. These experiments generated liters of bio-oil that was hydrotreated and fractionated into gasoline, diesel, and jet cuts. The phosphorus-modified ZSM-5 improved CFP bio-oil yield, resulting in an 11% relative increase in the carbon yield from biomass to aviation fuel and a 14% decrease in the minimum fuel selling price. These results highlight the impact targeted changes in catalyst acidity, achieved by adding 2.5 wt % P, can have on the carbon efficiency and feasibility of fuel production from biomass feedstocks.

09 BIOMASS FUELS↗

Interplay of light transmission and catalytic exchange current in photoelectrochemical systems

We develop an analytic current-voltage expression for a variable junction photoelectrochemical (PEC) cell and use it to investigate and illustrate the influence of the optical and electrical properties of catalysts on the optoelectronic performance of PEC devices. Specifically, the model enables a simple, yet accurate accounting of nanostructured catalyst optical and electrical properties through incorporation of an optical transmission factor and active catalytic area factor. We demonstrate the utility of this model via the output power characteristics of an exemplary dual tandem solar cell with indium gallium phosphide and indium gallium arsenide absorbers with varying rhodium catalyst nanoparticle loading. The approach highlights the importance of considering interactions between independently optimized components for optimal PEC device design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Potassium loading and thermal aging on K/Pt/Al2O3 high-temperature lean NOx trap catalysts

The effects of K loading and thermal aging on the structural properties and high temperature performance of Pt/K/Al2O3 lean NOx trap (LNT) catalysts were investigated using in situ X-ray diffraction (XRD), temperature-programmed decomposition/desorption of NOx (NOx-TPD), transmission electron microscopy (TEM), NO oxidation and NOx storage tests. In situ XRD results demonstrate that KNO3 becomes extremely mobile on the Al2O3 surface, and experiences complex transformations between orthorhombic and rhombohedral structures, accompanied by sintering, melting and thermal decomposition upon heating. NOx storage results show an optimum K loading around 10% for the best performance at high temperatures. At lower K loadings where the majority of KNO3 stays as a surface layer, the strong interaction between KNO3 and Al2O3 promotes KNO3 decomposition and deteriorates high-temperature performance. At K loadings higher than 10%, the performance drop is not caused by NOx diffusion limitations as for the case of barium-based LNTs, but rather from the blocking of Pt sites by K species, which adversely affects NO oxidation. Thermal aging at 800 ºC severely deactivates the Pt/K/Al2O3 catalysts due to Pt sintering. However, in the presence of potassium, some Pt remains in a dispersed and oxidized form. These Pt species interact strongly with K and, therefore, do not sinter. After a reduction treatment, these Pt species remain finely dispersed, contributing to a partial recovery of NOx storage performance.

Environmental Molecular Sciences Laboratory↗

On the effect of metal loading on the reducibility and redox chemistry of ceria supported Pd catalysts

The effect of Pd loading on the redox characteristics of a ceria support was examined using in situ Pd K-edge XAS, Ce L 3 -edge XAS and in situ X-ray diffraction techniques. Analysis of the data obtained from these techniques indicates that the onset temperature for the partial reduction of Ce(IV) to Ce(III), by exposure to H 2 , varies inversely with the loading of Pd. Whilst the onset and completion temperatures of the reduction of Ce(IV) to Ce(III) are different, both samples yield the same maximal fraction of Ce(III) formation independent of Pd loading. Furthermore, the partial reduction of Ce is found to be concurrent with the reduction of PdO and demonstrated that the presence of metallic Pd is necessary for the reduction of the CeO 2 support. Upon passivation by room temperature oxidation, a full oxidation of the reduced ceria support was observed. However, only a mild surface oxidation of Pd was identified. The mild passivation of the Pd is found to lead to a highly reactive sample upon a second reduction by H 2 . The onset of the reduction of Pd and Ce has been demonstrated to be independent of the Pd loading after a mild passivation with both samples exhibiting near room temperature reduction in the presence of H 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Next Generation Three-Way Catalysts for Future, Highly Efficient Gasoline Engines (Final Technical Report)

Ford Motor Company, Oak Ridge National Laboratory, and the University of Michigan completed a 3.25 year project on exhaust catalysts for gasoline vehicles that exhibit higher activity at lower temperatures down to 150°C. Ford has successfully used catalysts on cars and trucks to control emissions for over forty years. Changes in gasoline engine technology have allowed the use of “high tech” three-way catalysts (TWCs) to simultaneously control HC (hydrocarbons), CO (carbon monoxide), and NOx (nitrogen oxides) at nearly 100% efficiency. Excess fueling is used upon engine start to heat the catalyst up to its full operating temperature of greater than 350°C, lowering fuel economy and creating particulate matter. It was desirable to develop new catalysts for lower operating temperatures that may occur with future, more efficient gasoline powered vehicles, while still being durable to 150,000 mi with peak temperatures of 960°C. The work included laboratory preparation, aging, and poisoning of catalyst materials, activity tests, and chemical analyses. The objective of this project was to demonstrate progress toward the USDRIVE goal of achieving durable 90% conversion (T90) of hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx) at 150°C. The project partners focused on several supported metal catalyst structures to promote lower light-off temperatures, enhance metal-support interaction, and improve durability. The raw materials (oxides of aluminum, cerium, silicon, titanium, and zirconium) were not new, but were used in novel ways. Palladium (Pd) or rhodium (Rh) were supported either on layered metal oxide supports, on nanoparticles, or used in various core@shell configurations. Catalyst materials were aged hydrothermally to a simulated high mileage. The catalyst formulation with the lowest durable light-off was 0.5 wt% Rh supported on alumina with an overlayer of either Ti or Zr. The temperatures for 90% conversion were up to 128°C lower than those of a commercial Pd three-way catalyst that had > 3x metal loading of the new Rh catalyst. An additional material made of Pd supported on nanoparticles of ceria-zirconia (CZO) was also considered; the aged T90s were up to 40°C lower than the commercial catalyst, at similar metal loading. Further understanding of the catalyst architecture provided additional confidence to move forward with scale-up of 0.5 wt% Rh/Ti/Al2O3 to coated monolith laboratory cores for further evaluation. The team worked with Johnson Matthey to accomplish this, in addition to exploring manufacturability and potential costs. The overall benefit was estimated to be 10-15% lower NMOG and NOx tailpipe emissions on a cold start certification cycle.

54 ENVIRONMENTAL SCIENCES↗

Next Generation Three-Way Catalysts for Future, Highly Efficient Gasoline Engines (Final Report)

Ford Motor Company, Oak Ridge National Laboratory, and the University of Michigan completed a 3.25 year project on exhaust catalysts for gasoline vehicles that exhibit higher activity at lower temperatures down to 150°C. Ford has successfully used catalysts on cars and trucks to control emissions for over forty years. Changes in gasoline engine technology have allowed the use of “high tech” three-way catalysts (TWCs) to simultaneously control HC (hydrocarbons), CO (carbon monoxide), and NOx (nitrogen oxides) at nearly 100% efficiency. Excess fueling is used upon engine start to heat the catalyst up to its full operating temperature of greater than 350°C, lowering fuel economy and creating particulate matter. It was desirable to develop new catalysts for lower operating temperatures that may occur with future, more efficient gasoline powered vehicles, while still being durable to 150,000 mi with peak temperatures of 960°C. The work included laboratory preparation, aging, and poisoning of catalyst materials, activity tests, and chemical analyses. The objective of this project was to demonstrate progress toward the USDRIVE goal of achieving durable 90% conversion (T90) of hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx) at 150°C. The project partners focused on several supported metal catalyst structures to promote lower light-off temperatures, enhance metal-support interaction, and improve durability. The raw materials (oxides of aluminum, cerium, silicon, titanium, and zirconium) were not new, but were used in novel ways. Palladium (Pd) or rhodium (Rh) were supported either on layered metal oxide supports, on nanoparticles, or used in various core@shell configurations. Catalyst materials were aged hydrothermally to a simulated high mileage. The catalyst formulation with the lowest durable light-off was 0.5 wt% Rh supported on alumina with an overlayer of either Ti or Zr. The temperatures for 90% conversion were up to 128°C lower than those of a commercial Pd three-way catalyst that had > 3x metal loading of the new Rh catalyst. An additional material made of Pd supported on nanoparticles of ceria-zirconia (CZO) was also considered; the aged T90s were up to 40°C lower than the commercial catalyst, at similar metal loading. Further understanding of the catalyst architecture provided additional confidence to move forward with scale-up of 0.5 wt% Rh/Ti/Al 2 O 3 to coated monolith laboratory cores for further evaluation. The team worked with Johnson Matthey to accomplish this, in addition to exploring manufacturability and potential costs. The overall benefit was estimated to be 10-15% lower NMOG and NOx tailpipe emissions on a cold start certification cycle.

02 PETROLEUM↗

Biomass Catalytic Pyrolysis on Ni/ZSM-5: Effects of Nickel Pretreatment and Loading

Here in this work, Ni/ZSM-5 catalysts with varied nickel loadings were evaluated for their ability to produce aromatic hydrocarbons by upgrading of pine pyrolysis vapors. The effect of catalyst pretreatment by hydrogen reduction was also investigated. Results indicate that the addition of nickel increases the yield of aromatic hydrocarbons while simultaneously increasing the conversion of oxygenates, relative to ZSM-5, and these effects are more pronounced with increasing nickel loading. Additionally, while initial activity differences were observed between the oxidized and reduced forms of nickel on ZSM-5 (i.e., NiO/ZSM-5 versus Ni/ZSM-5), the activity of both catalysts converges with increasing time on stream. These reaction results coupled with characterization of pristine and spent catalysts suggest that the catalysts reach similar active states during catalytic pyrolysis, regardless of pretreatment, as NiO undergoes in situ reduction to Ni by biomass pyrolysis vapors. This reduction of NiO to Ni was confirmed by reaction results and characterization by NH 3 temperature-programmed desorption, temperature-programmed reduction, and X-ray diffraction. This finding is significant in that the ability to reduce or eliminate the need for a pre-reaction H 2 reduction of Ni-modified zeolite catalysts could reduce process complexity and operating costs in a biorefinery-based vapor-phase upgrading process to produce biomass-derived fuels and chemicals. The ability to monitor catalyst activity in real time with a molecular beam mass spectrometer used to measure uncondensed, hot pyrolysis vapors allows for an improved understanding of the mechanism for improved activity with Ni addition to ZSM-5, which is attributed to the ability to prevent deactivation by deposition of coke and capping of zeolite micropores.

09 BIOMASS FUELS↗

Hydrogen Evolution with Minimal Parasitic Light Absorption by Dense Co–P Catalyst Films on Structured p-Si Photocathodes

Planar and three-dimensionally structured p-Si devices, consisting of an electrodeposited Co–P catalyst on arrays of Si microwires or Si micropyramids, were used as photocathodes for solar-driven hydrogen evolution in 0.50 M H 2 SO 4 (aq) to assess the effects of electrode structuring on parasitic absorption by the catalyst. Without the use of an emitter layer, p-Si/Co–P microwire arrays produced a photocurrent density of -10 mA cm –2 at potentials that were 130 mV more positive than those of optimized planar p-Si/Co–P devices. Champion p-Si/Co–P microwire array devices exhibited ideal regenerative cell solar-to-hydrogen efficiencies of >2.5% and were primarily limited by the photovoltage of the p-Si/Co–P junction. Therefore, the vertical sidewalls of the Si microwire photoelectrodes minimized effects due to parasitic absorption at high loadings of catalyst for device structures with or without emitters.

14 SOLAR ENERGY↗

Electrodeposition of Nanostructured Copper on Gas Diffusion Layers as Electrocatalysts for Carbon Dioxide Reduction

The aim of the summer project was to immobilize copper nanostructures on gas diffusion layers to serve as electrocatalysts for the electrochemical reduction of CO 2 . Gas diffusion layers are typically bilayer structures consisting of a macro-porous backing material (carbon fiber paper) and a microporous, carbon-based layer (MPL). Classically, the copper catalysts are loaded on the microporous layer. Furthermore, the GDL is intrinsically hydrophobic due to polytetrafluoroethylene (PTFE)in its chemical composition, with the MPL having a more hydrophobic character due to its higher PTFE content. While beneficial for rendering the MPL impervious to electrolytes during actual CO 2 reduction, the hydrophobicity precludes sufficient wetting of the MPL layer, preventing conformal, uniformly distributed and strongly adhered deposits. A two electrode electrodeposition system was used to facilitate copper deposition. An implication of this system is the inability to ascertain or accurately modulate the cathodic over-potential. Hence, galvanostatic (current control) procedures are utilized for all deposition. To improve the wetting behavior of the MPL, the surface is subjected to surface pretreatment protocols prior to electrodeposition. In addition, as morphology of deposits play a role in their efficacy as catalysts in terms of selectivity and conversion, we systematically investigate the effects of different galvanostatic deposition procedures on copper morphology.

36 MATERIALS SCIENCE↗

Microwave-assisted ammonia synthesis over Ru/MgO catalysts at ambient pressure

Here, in this work, a fixed frequency (2.45 GHz) microwave (MW) was used to synthesis ammonia over Ru/MgO catalysts under ambient atmospheric pressure at 320 °C. The loading of Ru catalyst over MgO was varied at 4% and 10 wt %. The metal support interaction was found to play an important role not only catalytically but also altering the microwave-catalyst interaction affecting the ammonia formation rate. The higher metal loading (10 wt%) produced the most activity, stability, and energy efficiency. It was found the Ru was better dispersed at higher loading which decreased the sintering of the catalyst due to lower microwave energy needed to maintain the reaction temperature. Additional effects from the microwave can include enhanced electron movement and/or electric fields formed between the metal sites of the catalyst. The microwave reactor offers a quick on/off catalyst recovery, within 11 min, compared to thermal convectional Haber Bosch (HB) technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-Temperature Stability of Cobalt Grafted on Low-Loading Incorporated Mo-MCM-41 Catalyst for Synthesis of Single-Walled Carbon Nanotubes

Cobalt metal is a good catalyst for CO disproportionation to single-walled carbon nanotubes (SWNT) when particle size is stabilized on the nanometer scale. With reaction temperatures in the range of 973-1123 K, stabilization of nanometer Co particles against sintering requires a chemical bonding and/or occlusion of the Co particles. Catalysts with Co-grafted Mo-incorporated MCM-41 with different Mo loadings (<1 wt %) have been synthesized. Incorporation of Mo cations in the silica framework of MCM-41 provides different species as grafting sites. These grafting sites affect the strength of the metal-support interaction that controls sintering of active Co metal. The stability of Co at high temperature has been investigated by TPR and in situ/ex-situ X-ray absorption spectroscopy. The reduced Co metal particle size, after hydrogen prereduction, is independent of Mo loading. However, the Co particle size after SWNT synthesis is greatly affected by Mo anchoring and varied with loading. The Co particle size of low-Mo-loading samples after SWNT synthesis is little changed (from 0.88 nm after prereduction to 0.85 nm after SWNT synthesis), but the Co particle size difference of high-Mo-loading samples is gradually increased as the Mo loading is increased.

08 HYDROGEN↗