Search NASA⌕ Search

SEARCH · Search NASA

Results for “charge generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Improved Measurement of Ejection Velocities From Craters Formed in Sand

A typical impact crater is formed by two major processes: compression of the target (essentially equivalent to a footprint in soil) and ejection of material. The Ejection-Velocity Measurement System (EVMS) in the Experimental Impact Laboratory has been used to study ejection velocities from impact craters formed in sand since the late 1990s. The original system used an early-generation Charge-Coupled Device (CCD) camera; custom-written software; and a complex, multicomponent optical system to direct laser light for illumination. Unfortunately, the electronic equipment was overtaken by age, and the software became obsolete in light of improved computer hardware.

Cintala, Mark J.↗
NASA NTRS2018

Radiation Testing Electronics with Heavy Ions-The Best Way to Hit a Target Moving Ever Exponentially Faster

In 1972, when engineers at Hughes Aircraft Corporation discovered that errors in their satellite avionics were being caused by cosmic rays (so-called single-event effects, or SEE), Moore's Law was only 7 years old. Now, more than 45 years on, the scaling that drove Moore's Law for its first 35 years has reached its limits. However, electronics technology continues to evolve exponentially and SEE remain a formidable issue for use of electronics in space. SEE occur when a single ionizing particle passes through a sensitive volume in an active semiconductor device and generates sufficient charge to cause anomalous behavior or failure in the device. Because SEE can occur at any time during the mission, the emphasis of SEE risk management methodologies is ensuring that all SEE modes in a device under test are detected by the test. Because a particle's probability of causing an SEE generally increases as the particle becomes more ionizing, heavy-ion beams have been and remain the preferred tools for elucidating SEE vulnerabilities. In this talk we briefly discuss space radiation environments and SEE mechanisms, describe SEE test methodologies and discuss current and future challenges for use of heavy-ion beams for SEE testing in an era when the continued validity of Moore's law depends on innovation rather than CMOS scaling.

space radiation environments↗
NASA NTRS2021

Angle Dependence of Focused X-Ray-Induced Single Event Transients in an Epitaxial Silicon Diode

Focused X-Ray single event transient (SET) experiments are performed at small angles on an epitaxial silicon diode at two reverse bias conditions. For both biases, the collected charge and peak current results follow the cosine law, while the transient fall time remains independent of incident angle. This demonstrates that only the amount of charge being generated is affected by angle and not the fundamental device response.

Heavy ions↗
NASA NTRS2022

Angle Dependence of Focused X-Ray-Induced Single Event Transients in an Epitaxial Silicon Diode

Focused X-Ray single event transient (SET) experiments are performed at small angles on an epitaxial silicon diode at two reverse bias conditions. For both biases, the collected charge and peak current results follow the cosine law, while the transient fall time remains independent of incident angle. This demonstrates that only the amount of charge being generated is affected by angle and not the fundamental device response for these relatively large devices.

Focused X-ray↗
DOE OSTI2023

Ab initio quantum dynamics of plasmonic charge carriers

Surface plasmons respond strongly to electric fields and generate energetic (hot) charge carriers that can be used in optoelectronic devices. However, utilization of hot carriers has to outcompete fast carrier relaxation in metals. Often, the reported efficiencies of nanoscale devices based on plasmon excitations are low and the mechanisms of device operation remain inconsistent within the field. Further developments hinge on fundamental understanding of the nature and kinetics of plasmon decay processes. In this work, we provide an overview of time domain ab initio modeling of hot carrier dynamics, demonstrating that atomistic details of the surface structure of plasmonic materials, and their chemical interaction with semiconducting and molecular charge acceptors and substrates, play key roles in governing the dynamics pathways. Considered case studies represent various dynamics channels and illustrate solar energy and optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Smoothed Retarded Potentials and Fields

This note will follow the derivation of the Liénard–Wiechert potentials for a moving charge, which give the entire electromagnetic field generated by that charge including time delays, while concurrently deriving a version for a smoothed charge. The smoothed charge replaces the delta function charge density ρ ∝ δ 3 (x) by a spherically symmetric function f(|x|), so instead of a potential φ ∝ 1/ |x| for a charge at rest, the potential will be the 3D convolution of f with 1/ |x|. The smoothing will be defined in the ‘laboratory frame’ rather than the rest frame of the particle. If a spherically-symmetric distribution is required in a different rest frame, for example the averaged rest frame of a whole particle beam, the particle histories may be Lorentz boosted and the resulting fields Lorentz boosted back. Another motivation for using the lab frame is that if a beam is uniformly accelerated by an electric field, it maintains its lab frame size, rather than shrinking as a rigid object would (if the beam enters an electric field from the side, the particles maintain their time separation and the length actually increases with the beam velocity). Properly defining a charge distribution of fixed size in the changing reference frame of an accelerating particle is somewhat complicated and relates to the concept of Born rigidity.

43 PARTICLE ACCELERATORS↗
NASA NTRS1993

Electrostatically Enhanced Vortex Separator

Proposed device removes fine particles from high-pressure exhaust gas of chemical reactor. Negatively charged sectors on rotating disks in vortex generator attracts positively charged particles from main stream of exhaust gas. Electrostatic charge enhances particle-separating action of vortex. Gas without particles released to atmosphere.

Collins, Earl R.↗
NASA NTRS1987

Secondary electron generation, emission and transport: Effects on spacecraft charging and NASCAP models

Secondary electrons control a spacecraft's response to a plasma environment. To accurately simulate spacecraft charging, the NASA Charging Analyzer Program (NASCAP) has mathematical models of the generation, emission and transport of secondary electrons. The importance of each of the processes and the physical basis for each of the NASCAP models are discussed. Calculations are presented which show that the NASCAP formulations are in good agreement with both laboratory and space experiments.

Katz, Ira↗
DOE OSTI2021

Picosecond laser generated plasma as a source of singly charged ions for external injection into an EBIS

The focus of this paper is on practical aspects of ion generation by picosecond lasers as a source of low charge state ions for external injection of ions into an electron beam ion source (EBIS). For a ps-laser, compared to a ns-laser currently used at Relativistic Heavy Ion Collier Electron Beam Ion Source (RHIC EBIS), the influence of heat conductivity in the solid target is almost negligible, which results in a lower target consumption rate and less vacuum pressure rise. By using a laser with high repetition rate, it is possible to produce quasi continuous 1+ ion beams for periods of tens of milliseconds, making it possible to take advantage of the ability of the EBIS to accumulate ions in the “slow” injection capture mode. Producing such an ion pulse train is now feasible since ps-lasers with pulse energy up to 10 mJ and rep-rate up to 10 kHz have recently become commercially available. The advantages of this lower current accumulation scheme include: (1) easier beam transport due to lower space charge of lower beam currents required compared to the present single pulse fast injection scheme, (2) better EBIS pulse to pulse ion output stability since pulse to pulse ion variations of the laser source are averaged over a long train of laser pulses, and (3) the possible addition of an isotope separator in which rare beams could be produced and selected at run time from less expensive (unenriched) targets. We studied the properties of plasmas generated by a ps-laser with 1.27 mJ energy within an 8 ps pulse and a repetition rate up to 400 Hz at Argonne National Laboratory to investigate feasibility and specify parameters for a laser ion source for RHIC EBIS using a “slow” injection mode. Al, Ti, Cu, Nb, and Ta targets were tested with various target translation speeds. Here, we demonstrated that a both “slow” and “fast” injection modes are accessible with a single ion source geometry and single injection line, providing the most attractive option for an ion source for external injection into RHIC EBIS trap based on a ps-laser.

43 PARTICLE ACCELERATORS↗
NASA NTRS1991

Highly mobile oxygen hole-type charge carriers in fused silica

Some peculiar positive charge carriers are thermally generated in fused silica above 500 C. These charge carriers appear to be positive holes, chemically O-states, probably arising from dissociation of peroxy defects. The charge carriers give rise to a pronounced positive surface charge which disappears upon cooling but can be quenched by rapid quenching from about 800 C. Reheating to 200 C remobilizes these charge carriers and causes them to anneal below 400 C. The generation of positive holes charge carriers may be important to understand failure mechanisms of SiO2 insulators.

Freund, Friedemann↗
DOE OSTI2023

LDRD External Report Summary

Photovoltaics operate by light induced generation of negative electrons and positive electron holes, which are separated to generate electricity. These charges can recombine before an electric current can be generated resulting in lower solar power conversion efficiencies. Herein, we study the impact of magnetic fields on mitigating charge recombination to increase photovoltaic efficiencies.

14 SOLAR ENERGY↗
NASA NTRS2007

Wetlife Study of Nickel Hydrogen Cells

A study was undertaken to determine the residual Nickel Precharge, and to understand the Performance and Cycle Life of Aged Nickel Hydrogen cells that were in cold storage up to thirteen (13) years. Comsat Technical Services, Aerospace Corporation, and NSWC/Crane test data to date indicate a nominal electrical performance with a small second plateau and the presence of Nickel Precharge in the cells: Cell Teardown, Plate (active Nickel Precharge determination), and Electrolyte Analyses are in progress. Preliminary Thermal Imaging data indicates that older the cell greater the heat generation, but cell over charge (capacity) could dominate heat generation. U.S. Govt. cells has completed 1150 nominal 60% LEO cycles. The completion date for this study is January 31, 2008.

Source record↗
DOE OSTI2023

Facile etching for single crystal cathode materials

A recycling and synthesis of charge material for secondary batteries generates single-crystal charge materials for producing batteries with greater charge cycle longevity. Charge material particles undergo a heating for fusing or enhancing grain boundaries between polycrystalline particles. The resulting, more well-defined grain boundaries are easily etched by a relatively weak mineral acid solution. The acid solution removes material at the grain boundaries to separate secondary particles into primary particles along the grain boundaries. The resulting single crystal (monocrystalline) charge material particles are washed and filtered, and typically re-sintered to accommodate any needed lithium (lithium carbonate), and result in a charge material with larger surface area, higher lithium diffusivity and lower cation ordering.

Wang, Yan↗
DOE OSTI2025

Impact of the LiPF6 Concentration on the Interfacial Charge Transfer and Fast-charging Capabilities of Lithium-Ion Batteries

Fast-charging lithium-ion batteries (LIB) demand optimized electrolyte formulations to balance ionic conductivity, viscosity, and interfacial charge transfer kinetics. This study examines how LiPF 6 concentration shapes solvation structure, desolvation energy, charge transfer activation energy, and solid electrolyte interphase (SEI) properties, which are critical for fast-charging performance. Using Raman spectroscopy, electrochemical cycling, X-ray photoelectron spectroscopy, and atomistic modeling, we analyze how varying LiPF 6 concentrations impact interfacial and bulk transport properties. Our findings show that increasing LiPF 6 concentration alters lithium solvation structures, reduces desolvation energy, and accelerates charge transfer at the electrode interface. Higher concentrations lower the activation energy for charge transfer and suppress excessive SEI growth, improving interfacial kinetics. However, concentrations above a certain threshold increase viscosity and reduce ionic conductivity, limiting transport efficiency. These results offer insights into electrolyte solvation and interfacial charge transfer mechanisms, providing guidelines for designing next-generation fast-charging LIB electrolytes with enhanced efficiency, stability, and longevity.

Son, Seoung-Bum [Argonne National Laboratory (ANL)↗
DOE OSTI2020

Design of target irradiation and diagnostic chamber to study ps-laser generated plasma as a source of singly charged ions for external injection into an electron beam ion source

High repetition-rate (~10 kHz) ps-lasers are becoming available on the market with reasonable cost and may offer several advantages compared to ns-lasers by generating nearly continuous beams of singly charged ions appropriate for the “slow” injection mode into the Electron Beam Ion Source (EBIS). To evaluate these advantages, we will perform studies of a ps-laser generated plasma using a laser with a pulse duration of 8 ps and energy up to 5 mJ per pulse. A vacuum chamber equipped with a 3D target positioner, a focusing lens, and a Faraday Cup has been designed and built for this study. Lens-to-target distance variations have been measured using a laser tracker over the whole range of horizontal and vertical translation for all five targets we will use. The variations were found to be within ±150 µm. This level of “target flatness” should be acceptable for our experimental conditions. Ion currents and ion pulse durations of various elements (from Al to Ta) will be measured for different target irradiation conditions (focal spot size and laser pulse energy). The results obtained will allow us to specify all parameters and geometry of a laser ion source based on a ps-laser to provide external ion injection into the relativistic heavy ion collider EBIS

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Optimal Transactive Energy Trading of Electric Vehicle Charging Stations With On-Site PV Generation in Constrained Power Distribution Networks

This paper presents a two-level transactive energy market framework, that enables energy trading among electric vehicle charging stations (EVCSs). At the lower level, the discharging capability of EVs and on-site PV generation are leveraged by individual EVCS for participating in the transactive trading with their peers. Once the lower-level trading is completed, EVCSs trade energy at the upper level through the power grid network managed by the distribution system operator (DSO). The upper-level market is cleared while satisfying the power distribution network constraints. A cooperative game-based model is proposed to model the energy trading among EVCSs. To this end, the asymmetric Nash bargaining method is applied to allocate the grand coalition's payoff to each EVCS at the upper-level market, while a weighted proportional allocation method is used to allocate individual EVCS's payoff to its respective EVs at the lower-level market. In this work, the upper-level market formulation is further decomposed into two subproblems representing an energy scheduling and trading subproblem which maximizes EVCS payoffs, and a bargaining subproblem which allocates EVCS payoffs. The effectiveness of the proposed framework for incentivizing transactive trades among EVs and EVCSs is validated in case studies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗