Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Potential Link Between Ice Nucleation and Climate Model Spread in Arctic Amplification

Arctic amplification (AA) is simulated by all global climate models, however the spread in the degree of projected warming is large and the underlying mechanisms driving it are poorly understood. The impact of the temperature dependence of immersion freezing on cloud feedbacks and AA is studied using NASA's GEOS-5 model. Parameterizations that exhibit low ice-nucleating particle (INP) concentrations in the high Arctic during summer are found to weaken the cloud-phase feedback. This allows sunlight to readily melt sea-ice in the summer, which decreases the stability of the lower troposphere, causing a decrease in wintertime cloud fraction over open ocean. Arctic amplification was found to span from ∼1.4 to >2.6, which spans 30% of the spread in AA in the coupled model intercomparison project models, depending on the temperature dependence of immersion freezing. These results suggest that summertime INP concentrations may provide an observational constraint on AA.

Ice Nucleation↗

Cloud Properties and Boundary Layer Stability Above Southern Ocean Sea Ice and Coastal Antarctica

Significant variability in climate predictions originates from the simulated cloud cover over the Southern Ocean. Historically, Southern Ocean cloud and aerosol properties have been less studied than their northern hemisphere counterparts, and cloud-sea-ice interactions over the Southern Ocean also remain largely unexamined. We used data from combined radar, lidar, radiometer, radiosonde, and ERA5 reanalysis profiles to investigate cloud property relationships to cloud temperature, sea-ice concentration, and boundary layer stability. Our findings show correlations between both cloud macrophysical properties and radiative effects and sea-ice concentration, and that the marine atmospheric boundary layer is more stable over higher sea-ice concentrations. Mixed-phase cloud frequency of occurrence was highest over the sea-ice zone at 15%, three times higher than over cold water south of the Antarctic Polar Front. For temperatures greater than –15°C, low-level, single-layer clouds were more likely to precipitate ice if they were coupled to cold-water or sea-ice surfaces than if they were decoupled from these surfaces, with the highest percentage of clouds precipitating ice observed over sea ice. These findings suggest a surface source of ice-nucleating particles at high southern latitudes that increases cloud glaciation probability. We discuss the implications of our results for future studies into the relationship between cloud properties, aerosols, sea ice, and boundary layer stability at high latitudes over the Southern Ocean.

54 ENVIRONMENTAL SCIENCES↗

Modified Geometric Truncation of the Scattering Phase Function

Phase function of light scattering on large atmospheric particles has very strong peak in forward direction constituting a challenge for accurate numerical calculations of radiance required in remote sensing problems. Scaling transformation replaces original phase function with a sum of the delta function and a new regular smooth phase function. Geometric truncation is one of the ways to construct such a smooth function. The replacement phase function coincides with the original one outside the forward cone and preserves the asymmetry parameter. It has discontinuity at the cone. Another simple functional form of the replacement phase function within the cone is suggested. It enables continuity and allows for a number of modifications. Three of them are considered in this study: preserving asymmetry parameter, providing continuity of the 1st derivative of the phase function, and preserving mean scattering angle. Yet another problem addressed in this study is objective selection of the width of the forward cone. That angle affects truncation fraction and values of the phase function within the cone. A heuristic approach providing unambiguous criterion of selection of the truncation angle is proposed. The approach has easy numerical implementation. Suggested modifications were tested on cloud phase function using discrete ordinates and Monte Carlo methods. It was shown that the modifications provide better accuracy of the radiance computation compare to the original geometric truncation with discrete ordinates while continuous derivative approach provides significant gain in computer time with Monte Carlo simulations.

Alexander Radkevich↗

Nearly a Decade of CALIPSO Observations of Asian and Saharan Dust Properties Near Source and Transport Regions

The lidar on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission, makes robust measurements of dust and has generated a length of record that is significant both seasonally and inter-annually. We exploit this record to determine a multi-year climatology of the properties of Asian and Saharan dust, in particular seasonal optical depths, layer frequencies, and layer heights of dust gridded in accordance with the Level 3 data products protocol, between 2006-2015. The data are screened using standard CALIPSO quality assurance flags, cloud aerosol discrimination (CAD) scores, overlying features and layer properties. To evaluate the effects of transport on the morphology, vertical extent and size of the dust layers, we compare probability distribution functions of the layer integrated volume depolarization ratios, geometric depths and integrated attenuated color ratios near the source to the same distributions in the far field or transport region. CALIPSO is collaboration between NASA and Centre National D'études Spatiales (CNES), was launched in April 2006 to provide vertically resolved measurements of cloud and aerosol distributions. The primary instrument on the CALIPSO satellite is the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), a near-nadir viewing two-wavelength polarization-sensitive instrument. The unique nature of CALIOP measurements make it quite challenging to validate backscatter profiles, aerosol type, and cloud phase, all of which are used to retrieve extinction and optical depth. To evaluate the uncertainty in the lidar ratios, we compare the values computed from dust layers overlying opaque water clouds, considered nominal, with the constant lidar ratio value used in the CALIOP algorithms for dust. We also explore the effects of noise on the CALIOP retrievals at daytime by comparing the distributions of the properties at daytime to the nighttime distributions.

Omar, Ali H.↗

Cloud Remote Sensing with EPIC/DSCOVR Observations: A Sensitivity Study with Radiative Transfer Simulations

The Earth Polychromatic Imaging Camera (EPIC) onboard the Deep Space Climate Observatory (DSCOVR) views nearly the whole sunlit face of the Earth with 10 spectral bands ranging from the UV to the near-infrared, including two oxygen absorbing bands centered at 764 nm (A-band) and 687.75 nm (B-band). Clouds are among the primary remote sensing targets using EPIC images because of their important impacts on the Earth’s radiation budget. In order to facilitate the EPIC cloud data product development, we have built a radiative transfer simulator featuring flexible cloud microphysical parameters, gas absorptions, and the instrument line shape functions for each EPIC band. The radiative transfer simulator is used to explore the sensitivity of EPIC observations on liquid-phase cloud microphysical parameters, including optical depth, geometric thickness, and cloud top height. We found that the ratios of the reflectances in the oxygen A and B bands to their respective continuum measurements can be used to increase the confidence level of cloud masking over scenes with sun-glint. In addition, the 388 nm band can be used to differentiate low and high clouds with the uncertainty of roughly 2–3 km. Combining this information with the oxygen absorption bands, the cloud geometric thickness can be obtained with the rough uncertainty of 3–4 km.

atmospheric and ocean optics↗

Aerosol–Ice Formation Closure: A Southern Great Plains Field Campaign

Prediction of ice formation in clouds presents one of the grand challenges in the atmospheric sciences. Immersion freezing initiated by ice-nucleating particles (INPs) is the dominant pathway of primary ice crystal formation in mixed-phase clouds, where supercooled water droplets and ice crystals coexist, with important implications for the hydrological cycle and climate. However, derivation of INP number concentrations from an ambient aerosol population in cloud-resolving and climate models remains highly uncertain. We conducted an aerosol–ice formation closure pilot study using a field-observational approach to evaluate the predictive capability of immersion freezing INPs. The closure study relies on collocated measurements of the ambient size-resolved and single-particle composition and INP number concentrations. The acquired particle data serve as input in several immersion freezing parameterizations, which are employed in cloud-resolving and climate models, for prediction of INP number concentrations. We discuss in detail one closure case study in which a front passed through the measurement site, resulting in a change of ambient particle and INP populations. We achieved closure in some circumstances within uncertainties, but we emphasize the need for freezing parameterization of potentially missing INP types and evaluation of the choice of parameterization to be employed. Overall, this closure pilot study aims to assess the level of parameter details and measurement strategies needed to achieve aerosol–ice formation closure. Furthermore, the closure approach is designed to accurately guide immersion freezing schemes in models, and ultimately identify the leading causes for climate model bias in INP predictions.

58 GEOSCIENCES↗

On the steady flow of gas from the nuclei of Seyfert galaxies

Heating of gas energy released during explosive events produces hot winds in Seyfert nuclei. Steady-state solutions indicate that supersonic velocities up to about 800 km per sec are obtainable. Lyman continuum radiation emitted by the wind ionizes and maintains temperature of cooler gas clouds seen in emission, and dominates energy losses during early stages of expansion. A study of stability of the thermal equilibrium state leads to a two-component model: a hot stable phase (the wind), in pressure equilibrium with a cooler stable phase (clouds). Extreme variations in cloud electron densities are a consequence of the steep decrease with radius of external pressure. Cloud dynamics are related to the radius of formation and internal parameters. Permitted lines of H are emitted by high-density clouds formed at the base of the wind, while forbidden lines arise in radially moving clouds, produced throughout the wind.

Wolfe, A. M.↗

Aerosol–Ice Formation Closure: A Southern Great Plains Field Campaign

Prediction of ice formation in clouds presents one of the grand challenges in the atmospheric sciences. Immersion freezing initiated by ice-nucleating particles (INPs) is the dominant pathway of primary ice crystal formation in mixed-phase clouds, where supercooled water droplets and ice crystals coexist, with important implications for the hydrological cycle and climate. However, derivation of INP number concentrations from an ambient aerosol population in cloud-resolving and climate models remains highly uncertain. We conducted an aerosol-ice formation closure pilot study using a field-observational approach to evaluate the predictive capability of immersion freezing INPs. The closure study relies on co-located measurements of the ambient size-resolved and single-particle composition and INP number concentrations. The acquired particle data serve as input in several immersion freezing parameterizations, that are employed in cloud-resolving and climate models, for prediction of INP number concentrations. We discuss in detail one closure case study in which a front passed through the measurement site, resulting in a change of ambient particle and INP populations. We achieved closure in some circumstances within uncertainties, but we emphasize the need for freezing parameterization of potentially missing INP types and evaluation of the choice of parameterization to be employed. Overall, this closure pilot study aims to assess the level of parameter details and measurement strategies needed to achieve aerosol-ice formation closure. The closure approach is designed to accurately guide immersion freezing schemes in models, and ultimately identify the leading causes for climate model bias in INP predictions.

ice formation↗

The Plane-parallel Albedo Bias of Liquid Clouds from MODIS Observations

In our most advanced modeling tools for climate change prediction, namely General Circulation Models (GCMs), the schemes used to calculate the budget of solar and thermal radiation commonly assume that clouds are horizontally homogeneous at scales as large as a few hundred kilometers. However, this assumption, used for convenience, computational speed, and lack of knowledge on cloud small scale variability, leads to erroneous estimates of the radiation budget. This paper provides a global picture of the solar radiation errors at scales of approximately 100 km due to warm (liquid phase) clouds only. To achieve this, we use cloud retrievals from the instrument MODIS on the Terra and Aqua satellites, along with atmospheric and surface information, as input into a GCM-style radiative transfer algorithm. Since the MODIS product contains information on cloud variability below 100 km we can run the radiation algorithm both for the variable and the (assumed) homogeneous clouds. The difference between these calculations for reflected or transmitted solar radiation constitutes the bias that GCMs would commit if they were able to perfectly predict the properties of warm clouds, but then assumed they were homogeneous for radiation calculations. We find that the global average of this bias is approx.2-3 times larger in terms of energy than the additional amount of thermal energy that would be trapped if we were to double carbon dioxide from current concentrations. We should therefore make a greater effort to predict horizontal cloud variability in GCMs and account for its effects in radiation calculations.

Oreopoulos, Lazaros↗

The COMBLE campaign: a study of marine boundary-layer clouds in Arctic cold-air outbreaks

One of the most intense air mass transformations on Earth happens when cold air flows from frozen surfaces to much warmer open water in cold-air outbreaks (CAOs), a process captured beautifully in satellite imagery. Despite the ubiquity of the CAO cloud regime over high-latitude oceans, we have a rather poor understanding of its properties, its role in energy and water cycles, and its treatment in weather and climate models. The Cold-air Outbreaks in the Marine Boundary Layer Experiment (COMBLE) was conducted to better understand this regime and its representation in models. COMBLE aimed to examine the relations between surface fluxes, boundary-layer structure, aerosol, cloud and precipitation properties, and mesoscale circulations in marine CAOs. Processes affecting these properties largely fall in a range of scales where boundary-layer processes, convection, and precipitation are tightly coupled, which makes accurate representation of the CAO cloud regime in numerical weather prediction and global climate models most challenging. COMBLE deployed an Atmospheric Radiation Measurement Mobile Facility at a coastal site in northern Scandinavia (69°N), with additional instruments on Bear Island (75°N), from December 2019 to May 2020. CAO conditions were experienced 19% (21%) of the time at the main site (on Bear Island). A comprehensive suite of continuous in situ and remote sensing observations of atmospheric conditions, clouds, precipitation, and aerosol were collected. Because of the clouds’ well-defined origin, their shallow depth, and the broad range of observed temperature and aerosol concentrations, the COMBLE dataset provides a powerful modeling test bed for improving the representation of mixed-phase cloud processes in large-eddy simulations and large-scale models.

54 ENVIRONMENTAL SCIENCES↗

Detection and Retrieval of Multi-Layered Cloud Properties Using Satellite Data

Four techniques for detecting multilayered clouds and retrieving the cloud properties using satellite data are explored to help address the need for better quantification of cloud vertical structure. A new technique was developed using multispectral imager data with secondary imager products (infrared brightness temperature differences, BTD). The other methods examined here use atmospheric sounding data (CO2-slicing, CO2), BTD, or microwave data. The CO2 and BTD methods are limited to optically thin cirrus over low clouds, while the MWR methods are limited to ocean areas only. This paper explores the use of the BTD and CO2 methods as applied to Moderate Resolution Imaging Spectroradiometer (MODIS) and Advanced Microwave Scanning Radiometer EOS (AMSR-E) data taken from the Aqua satellite over ocean surfaces. Cloud properties derived from MODIS data for the Clouds and the Earth's Radiant Energy System (CERES) Project are used to classify cloud phase and optical properties. The preliminary results focus on a MODIS image taken off the Uruguayan coast. The combined MW visible infrared (MVI) method is assumed to be the reference for detecting multilayered ice-over-water clouds. The BTD and CO2 techniques accurately match the MVI classifications in only 51 and 41% of the cases, respectively. Much additional study is need to determine the uncertainties in the MVI method and to analyze many more overlapped cloud scenes.

Minnis, Patrick↗

Saharan Dust Event Impacts on Cloud Formation and Radiation over Western Europe

We investigated the impact of mineral dust particles on clouds, radiation and atmospheric state during a strong Saharan dust event over Europe in May 2008, applying a comprehensive online-coupled regional model framework that explicitly treats particle-microphysics and chemical composition. Sophisticated parameterizations for aerosol activation and ice nucleation, together with two-moment cloud microphysics are used to calculate the interaction of the different particles with clouds depending on their physical and chemical properties. The impact of dust on cloud droplet number concentration was found to be low, with just a slight increase in cloud droplet number concentration for both uncoated and coated dust. For temperatures lower than the level of homogeneous freezing, no significant impact of dust on the number and mass concentration of ice crystals was found, though the concentration of frozen dust particles reached up to 100 l-1 during the ice nucleation events. Mineral dust particles were found to have the largest impact on clouds in a temperature range between freezing level and the level of homogeneous freezing, where they determined the number concentration of ice crystals due to efficient heterogeneous freezing of the dust particles and modified the glaciation of mixed phase clouds. Our simulations show that during the dust events, ice crystals concentrations were increased twofold in this temperature range (compared to if dust interactions are neglected). This had a significant impact on the cloud optical properties, causing a reduction in the incoming short-wave radiation at the surface up to -75Wm-2. Including the direct interaction of dust with radiation caused an additional reduction in the incoming short-wave radiation by 40 to 80Wm-2, and the incoming long-wave radiation at the surface was increased significantly in the order of +10Wm-2. The strong radiative forcings associated with dust caused a reduction in surface temperature in the order of -0.2 to -0.5K for most parts of France, Germany, and Italy during the dust event. The maximum difference in surface temperature was found in the East of France, the Benelux, and Western Germany with up to -1 K. This magnitude of temperature change was sufficient to explain a systematic bias in numerical weather forecasts during the period of the dust event.

Bangert, M.↗

Does spectroscopic evidence require two scattering layers in the Venus atmosphere.

Comments on Hunt's (1972) conclusion that the phase variation of lines in the 7820- and 7883-A CO2 bands is due to the presence of two scattering layers in the Venusian atmosphere. It is shown that the increase of equivalent width with phase between 0 and 90 deg noted by Hunt in the data by Gray Young et al. (1971) does not necessarily require a two-layer model of scattering in the Venusian atmosphere and that this increase may be due to the strong backward lobe in the Venusian cloud phase function. Hunt, in a reply, notes that Regas et al. incorrectly use in their analysis Hansen's (1969) data which are for a homogeneous planetary atmosphere, while Hunt used an inhomogeneous model of the Venusian atmosphere. In addition, further evidence to support Hunt's claim for a multilayered structure of the upper Venusian clouds is presented.

Regas, J. L.↗

Marine and terrestrial influences on ice nucleating particles during continuous springtime measurements in an Arctic oilfield location

Abstract. Aerosols that serve as ice nucleating particles (INPs) have the potential to modulate cloud microphysical properties and can therefore impact cloud radiative forcing (CRF) and precipitation formation processes. In remote regions such as the Arctic, aerosol–cloud interactions are severely understudied yet may have significant implications for the surface energy budget and its impact on sea ice and snow surfaces. Further, uncertainties in model representations of heterogeneous ice nucleation are a significant hindrance to simulating Arctic mixed-phase cloud processes. We present results from a campaign called INPOP (Ice Nucleating Particles at Oliktok Point), which took place at a US Department of Energy Atmospheric Radiation Measurement (DOE ARM) facility in the northern Alaskan Arctic. Three time- and size-resolved aerosol impactors were deployed from 1 March to 31 May 2017 for offline ice nucleation and chemical analyses and were co-located with routine measurements of aerosol number and size. The largest particles (i.e., ≥ 3 µ m or “coarse mode”) were the most efficient INPs by inducing freezing at the warmest temperatures. During periods with snow- and ice-covered surfaces, coarse mode INP concentrations were very low (maximum of 6 × 10 -4 L -1 at - 15 ° C), but higher concentrations of warm-temperature INPs were observed during late May (maximum of 2 × 10 -2 L -1 at - 15 ° C). These higher concentrations were attributed to air masses originating from over open Arctic Ocean water and tundra surfaces. To our knowledge, these results represent the first INP characterization measurements in an Arctic oilfield location and demonstrate strong influences from mineral and marine sources despite the relatively high springtime pollution levels. Ultimately, these results can be used to evaluate the anthropogenic and natural influences on aerosol composition and Arctic cloud properties.

54 ENVIRONMENTAL SCIENCES↗

Remote Sensing Data from CLARET: A Prototype Cart Data Set

A data set containing radiation, meteorological, and cloud sensor observations is documented. It was prepared for use by the Department of Energy's Atmospheric Radiation Measurement (ARM) program and other interested scientists. These data are a precursor of the types of data that ARM Cloud And Radiation Testbed (CART) sites will provide. The data are from the Cloud Lidar And Radar Exploratory Test (CLARET) conducted by the Wave Propagation Laboratory during autumn 1989 in the Denver-Boulder area of Colorado primarily for the purpose of developing new cloud-sensing techniques on cirrus. After becoming aware of this experiment, ARM scientists requested archival of subsets or the data to assist in the developing ARM program. Five CLARET cases were selected: two with cirrus, one with stratus, one with mixed-phase clouds, and one with clear skies. The cases range from 2 to 9.5 h in length. A pyranometer, pyrgeometer, pyrheliometer, and an infrared radiometer constituted the ensemble of instruments that provided surface radiation data. A lidar, radar, and ceilometer observed the cloud geometrical structure, and visual reports and all-sky camera observations were assimilated to provide cloud cover data. Radiosondes, wind profiler, RASS (profiling virtual temperature), microwave radiometers (observing column integrated liquid water and water vapor), and standard surface measurements provided meteorological data. Satellite data from the stratus case and one cirrus case were analyzed for statistics on cloud cover and top height. The main body of the selected data are available on diskette from the Wave Propagation Laboratory or Los Alamos National Laboratory. In addition to documenting the data set, this report describes CLARET and gives a bibliography of publications associated with the project. Some preliminary results of CLARET' research are also summarized. Simultaneous CO 2 lidar and radar backscatter measurements were shown to provide estimates of the effective radius of ice particles. Simultaneous radar and infrared radiometer data appear useful for estimating column-integrated numbers and average sizes of ice cloud particles. Ice water content obtained with this method compared favorably with values from another empirical technique using radar data alone. Depolarization of the CO 2 lidar signal from ice clouds was surprisingly small, suggesting that calculation of backscatter from nonspherical particles for this lidar is a tractable problem. Examples are also cited of CO 2 lidar measurements of the effective radius of water cloud drop size distributions and of inference of the size of pristine ice crystals that assume a particular orientation in the air. These parameters are all important to radiative transfer through clouds.

Clouds (Meteorology)↗

Arctic Ice Nucleation Sampling during MOSAiC (INPMOSAIC2) Field Campaign Report

The accelerated rate of warming in the Arctic is of great concern due to potential impacts that include release of greenhouse gases from permafrost, melting glacial ice contributing to sea level rise, and declining sea ice cover exposing the darker ocean surface. These processes induce positive feedbacks and contribute to further warming that affects climate globally. Clouds play a crucial role in regulating the energy reaching the sea ice and snow surfaces, but the magnitude of their effects on surface temperature is not well constrained in the Arctic. Aerosols are an important contributor by serving as seeds for cloud particle formation, but even less is known about their overall impact and origin. In particular, aerosols that serve as ice nucleating particles (INPs) are vastly understudied, especially above the central Arctic Ocean. However, INPs likely play a significant role in arctic mixed-phase cloud (AMPC) microphysics and the resulting impacts of such clouds on the surface energy budget over the sea ice.

54 ENVIRONMENTAL SCIENCES↗

Exploratory Ice Nucleation Measurements at Oliktok Field Campaign Report

Ice nucleating particles (INPs)—such as mineral dust and bacteria (1)—are a crucial source of seeds for cloud ice crystal formation, and can subsequently impact cloud radiative properties, lifetime, and precipitation formation processes (2-4). The presence of such particles in the atmosphere can be rare, but large concentrations are not required to have substantial impacts on cloud microphysics (3). However, knowledge of INPs, particularly in the Arctic, is limited due to the dearth of measurements in time and space. It is especially important to evaluate the sources and efficiency of INPs in the Arctic due to the role mixed-phase clouds play in facilitating the surface energy budget and thus energy reaching the sea ice and snow surfaces (4, 5). The purpose of this campaign, called INPOP (Ice Nucleating Particles at Oliktok Point), is to address the issue of limited information of Arctic INPs by providing time- and size-resolved INP concentrations over the course of a 3-month springtime campaign. This period is subject to Arctic haze, whereby pollutants from mid-latitudes are frequently transported to the Arctic and influence the relatively clean Arctic atmosphere (6-9). One unique aspect of this study is that the measurements were conducted at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility third ARM Mobile Facility (AMF3) in Oliktok Point, North Slope of Alaska (NSA), which is located in the northwest edge of the Prudhoe Bay oilfield. Typically, oil and natural gas extraction emissions are not thought to serve as a significant source of INPs, since naturally produced primary aerosols are the most efficient and abundant INPs (e.g., 1). However, the goal of INPOP was to evaluate INPs in the context of supporting aerosol and meteorological observations to assess: (1) if local industrial activities due to the oilfield operations can serve as a source of INPs (e.g., such as road dust from routine vehicular operations) and (2) if other regional or long-range transported sources impact a polluted Arctic location by introducing higher concentrations of more efficient INPs (e.g., transport of primary biological aerosol particles (PBAPs) from open ocean water or Arctic haze INPs). Unlike other Arctic coastal locations in the spring, Oliktok Point has a distinct combination of aerosol sources including long-range transported haze, regional/local marine emissions, and the local oilfield activities. Ground-based, immersion-mode, ice nucleation measurements were conducted on samples collected at the AMF3 in Oliktok Point from 1 March to 31 May, 2017. Samples were collected using a Davis Rotating-drum Unit for Monitoring (DRUM; DRUMAir, LLC) cascading impactor in 4 stages (i.e., size bins). Instrument information on the model used, the DA400, can be found at the DRUMAir website (http://www.drumair.com/). Stages A, B, C, and D, had particle size cuts at 2.96, 1.21, 0.34, and 0.15 μm particle diameter. Strips of sample substrate (PFA, perfluoroalkoxy; McMaster) were adhered to each disc in each stage and coated with petrolatum to enable particles to stick on impact. The discs move slowly over time, such that aerosol loading is streaked onto the PFA. Every 24 hours, a blank spot is created on the PFA to separate daily samples. The pump typically pulled 25 lpm at the inlet with all the discs in place in each stage. Daily samples were collected for each of the four stages, equaling 36,000 total L of air per sample. Discs rotated for approximately 24 days before the sampling per strip was complete and a new disc was installed by the ARM operators. Discs were stored frozen after collection until the end of the study.

54 ENVIRONMENTAL SCIENCES↗

The Role of Thermodynamic Phase Shifts in Cloud Optical Depth Variations with Temperature

We present a novel method that identifies the contributions of thermodynamic phase shifts and processes governing supercooled liquid and ice clouds to cloud optical depth variations with temperature using MODIS observations. Our findings suggest that thermodynamic phase shifts outweigh the net influence of processes governing supercooled liquid and ice clouds in causing increases in mid-latitudinal cold cloud optical depth with temperature. Cloud regime analysis suggests that dynamical conditions appear to have less influence on the contribution of thermodynamic phase shifts to cloud optical depth variations with temperature. Thermodynamic phase shifts also contribute more to increases in cloud optical depth during colder seasons due to the enhanced optical thickness contrast between liquid and ice clouds. The results of this study highlight the importance of thermodynamic phase shifts in explaining cold cloud optical depth increases with temperature in the current climate and may elucidate their role in the cloud optical depth feedback.

cloud optical depth↗