Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloudSat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Convective Entrainment Rates Estimated from Aura CO and CloudSat/CALIPSO Observations and Comparison with GEOS-5

Entrainment rate (λ) in convective parameterizations remains a sensitive parameter with much uncertainty in model simulations. This study estimates λ using carbon monoxide (CO) measurements jointly from the Microwave Limb Sounder (MLS) and Tropospheric Emission Spectrometer (TES) onboard the Aura satellite, associated with deep convective cases identified by CloudSat and CALIPSO observations. CO is treated as a conserved quantity over convective transport time scales and a simple entraining-plume model is used to derive entrainment rates. The relationships of the observational estimates of λ as a function of convective height, environmental relative humidity and convective available potential energy (CAPE) derived from Atmospheric Infrared Sounder (AIRS) data are compared with those from Goddard Earth Observing System Model (GEOS-5) simulations. Bulk statistics of λ show that the values of λ are predominately below 20% km(exp-1) for deep convection and the occurrence frequency of any λ decreases with increasing λ. Composite λ values are generally lower in the tropics compared to northern mid-latitudes in both observations and the GEOS-5 model. A decrease of λ with increasing convective height is found in both observations and model simulations. We also find that λ tends to decrease with increasing CAPE in the observation-based λ’s and plume-based GEOS-5 λ’s, although the model given λ’s have a non-monotonic relation with CAPE. The observed λ’s have a weak relation with lower-to-mid tropospheric RH, while both GEOS-5 plume-based and given λ increases with increasing RH.

Ryan E Stanfield↗
NASA NTRS2019

Enhancing GPM Passive and Combined Microwave Algorithms with Dynamic Surface Information for Drizzle Retrieval and Improved Precipitation Detection Over Land

Following the 2014 launch of the Global Precipitation Measurement Mission (GPM), an unprecedented combination of coincident active and passive microwave observations are available for state of the art precipitation retrieval. The GPM Combined Algorithm forms the backbone of this effort, optimizing geophysical variables for agreement with the full suite of multi-spectral information content. These combined retrievals are then utilized, along with a radiative transfer model, as a database applied for retrievals across a constellation of passive microwave radiometers of varying frequencies. By keeping such retrievals related through the transfer standard of the combined algorithm, level 3 products such as the Integrated Multi-satellitE Retrievals for GPM (IMERG) are able to provide consistent global products for users at the higher temporal resolution required for hydrological applications. In initial versions of the combined product, precipitation retrievals are carried out only in the presence of a signal from the active radar. As a result, light precipitation and drizzle below the threshold of DPR sensitivity are not included in any of the products down the chain from the constellation to IMERG. In this work, the effects of enhancing the retrievals with a surface emissivity and non-raining water vapor retrieval using the passive observations are explored. Over both ocean and land, the surface retrieval is used to identify areas with high probability of light precipitation and drizzle which is then quantified using techniques derived from the higher sensitivity CloudSat mission. Results indicate successful inclusion of drizzle in the retrievals that can then be included in the constellation databases, as well as improvement in passive microwave false positive precipitation signals over land in cases where surface scattering was misinterpreted as precipitation signal. The inclusion of the dynamic surface information also creates a more robust, radiometrically consistent retrieval scheme for process studies and hydrologic applications.

Ringerud, Sarah↗
NASA NTRS2020

Impact of Convectively Detrained Ice Crystals on the Tropical Upper Troposphere and Lower Stratosphere

The role of convectively detrained ice crystals on the humidity of the tropical upper troposphere and lower stratosphere (UTLS) is investigated in simulations of cirrus clouds along trajectories launched from the 378K potential temperature level in the tropics. The one-dimensional (vertical) cloud model tracks individual ice crystals through their lifecycle beginning with detrainment from convection, followed by deposition growth, sedimentation and sublimation. Convective influence of the parcels is diagnosed by tracing the trajectories through time-dependent fields of convective cloud-top height adjusted to match the CloudSAT and CALIPSO statistics. Model simulations of UTLS water vapor and cloud fields are evaluated and constrained by comparison with Aura MLS and CALIPSO measurements. Preliminary results indicate sensitivity of the detrained ice crystal lifecycle to atmospheric conditions downstream of convection. Specifically, cooling (high relative humidity and supersaturation) downstream of convection leads to deposition growth and sedimentation of detrained ice crystals, resulting in net dehydration of the UTLS. In contrast, warming (low relative humidity and subsaturation) downstream of convection leads to sublimation of detrained ice crystals and subsequent hydration. As such, the impact of detrained ice crystals on the humidity of the UTLS exhibits distinct spatial variability. Detrained ice crystals predominantly dehydrate the UTLS in the tropical mean. Sensitivities to the convectively detrained ice crystal size and concentration are also examined using measurements from the StatoClim aircraft campaign. The importance of convectively detrained ice crystals will be discussed within the context of the overall contribution of convection to the lower stratospheric humidity.

Ueyama, Rei↗
NASA NTRS2019

Influence of Deep Convection on Cirrus and Water Vapor Concentration in the Upper Troposphere and Lower Stratosphere

It is well known that stratospheric humidity is primarily controlled by freeze drying (ice crystal growth and sedimentation) of air ascending across the cold tropical tropopause. However, the suggestion of an important source of water vapor from deep convection that extends above the tropical tropopause has persisted. There exists much anecdotal evidence of direct convective hydration of the lower stratosphere based on measurements from high altitude aircraft campaigns, but quantifying the impact of deep convection on the overall budget of stratospheric water vapor has proven challenging. The role of convection on the humidity of the upper troposphere and lower stratosphere (UTLS) is investigated in simulations of cirrus clouds along trajectories launched from given potential temperature level surfaces. The one-dimensional (vertical) cloud model tracks individual ice crystals through their life cycles, beginning with nucleation or detrainment from convection, followed by deposition growth, sedimentation and sublimation. Convective influence of the parcels is diagnosed by tracing the trajectories through time-dependent fields of convective cloud-top height adjusted to match the CloudSAT and CALIPSO statistics. Model simulations of UTLS water vapor and cloud fields are evaluated and constrained by comparison with MLS and CALIPSO measurements. The simulation results indicate that the overall impact of convection on water vapor near the tropical tropopause is 10-15%, while the impact on lower stratospheric humidity is no more than a few percent. Ice crystals detrained from deep convection have relatively small effect. The general implications for the importance of deep convection on UTLS humidity and cirrus cloud fraction will be discussed.

Ueyama, Rei↗
NASA NTRS2018

Surface Irradiances of Edition 4.0 Clouds and the Earth's Radiant Energy System (CERES) Energy Balanced and Filled (EBAF) Data Product

The algorithm to produce the Clouds and the Earth’s Radiant Energy System (CERES) Edition 4.0 (Ed4) Energy Balanced and Filled (EBAF)-surface data product is explained. The algorithm forces computed topof- atmosphere (TOA) irradiances to match with Ed4 EBAF-TOA irradiances by adjusting surface, cloud, and atmospheric properties. Surface irradiances are subsequently adjusted using radiative kernels. The adjustment process is composed of two parts: bias correction and Lagrange multiplier. The bias in temperature and specific humidity between 200 and 500 hPa used for the irradiance computation is corrected based on observations by Atmospheric Infrared Sounder (AIRS). Similarly, the bias in the cloud fraction is corrected based on observations by Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) and CloudSat. Remaining errors in surface, cloud, and atmospheric properties are corrected in the Lagrange multiplier process. Ed4 global annual mean (January 2005 through December 2014) surface net shortwave (SW) and longwave (LW) irradiances increase by 1.3Wm22 and decrease by 0.2Wm22, respectively, compared to EBAF Edition 2.8 (Ed2.8) counterparts (the previous version), resulting in an increase in net SW 1LWsurface irradiance of 1.1Wm22. The uncertainty in surface irradiances over ocean, land, and polar regions at various spatial scales are estimated. The uncertainties in all-sky global annual mean upward and downward shortwave irradiance are 3 and 4Wm22, respectively, and the uncertainties in upward and downward longwave irradiance are 3 and 6Wm22, respectively. With an assumption of all errors being independent, the uncertainty in the global annual mean surface LW 1 SW net irradiance is 8Wm22.

Kato, Seiji↗
NASA NTRS2019

Seasonal Variations of Arctic Low-Level Clouds and its Linkage to Sea Ice Seasonal Variations

Using CALIPSO-CloudSat-Clouds and the Earth's Radiant Energy System (CERES)-Moderate Resolution Imaging Spectrometer (MODIS) (C3M) dataset, this study documents the seasonal variation of sea ice, cloud, and related atmospheric properties in the Arctic region (70°N–82°N) during the period 2007-2010. The surface type stratification used reveals the surface type influence on the Arctic cloud liquid water path (LWP)seasonality. Four surface types are defined: i) Permanent Ocean, ii) Land, iii) Permanent Ice, and iv) Transient Sea Ice. The Transient Ice regions are further divided into sub-regions according to the onset dates of melt/freeze season. Results show that the sea ice cover has no significant direct influence on the seasonal variation of the water vapor in the lower troposphere and the low-level cloud LWP. Rather, the role played by sea ice appear indirect by modifying the surface temperature response to increased solar insolation and influencing lower tropospheric stability (LTS). The results suggest that the combined increase in atmospheric water vapor due to warming air temperatures and the weakening of the inversion strength that governs the seasonal structure of cloud LWP. Over Transient Ice regions, the results suggest that the May peak in LWP coincides with a decrease in LTS and that is insensitive to melt and freeze onset. Variations in melt and freeze onset set are found to influence probably distribution of cloud LWP where regions of earlier melt and later freeze onset how a higher likelihood of larger values.

Yueyue Yu↗
NASA NTRS2011

TPSAS-NF1676L-13037-DND

Mineral dust has a significant and uncertain role in the direct aerosol radiative forcing of climate. Spaceborne lidars such as CALIOP help reduce these uncertainties through vertical profile measurements of aerosol optical properties. One current limitation to the accurate retrieval of aerosol extinction and optical depth from CALIOP is the assumed relationship between the aerosol extinction to aerosol backscatter (i.e. the extinction-to-backscatter ratio, also referred to here as the lidar ratio or Sa). This problem is especially acute at 1064 nm, where few estimates of the lidar ratio exist. This study uses a dataset of eight underflights of CALIOP during August 2010 by the NASA Langley Research Center airborne High Spectral Resolution Lidar (HSRL) to study Saharan dust transported across the Atlantic Ocean. The standard HSRL profile products include aerosol backscatter coefficients and depolarization ratios at both 532 nm and 1064 nm, and aerosol extinction coefficients (and therefore also lidar ratios) at 532 nm only. In this work, we further derive estimates of aerosol lidar ratios and extinction coefficients at 1064 nm via application of a two-wavelength technique that uses the 532 nm aerosol backscatter coefficients and the 1064 nm attenuated total backscatter profile. Summary statistics of the dust lidar ratio and depolarization at 532 nm and 1064 nm from these eight flights are presented. Implications for the CALIOP dust and polluted dust aerosol types and lidar ratio selection are discussed. In addition to the two-wavelength retrievals of lidar ratio at 1064 nm, a demonstration case of a 1064 nm lidar ratio retrieval over the ocean from CALIOP using the CloudSat measurement of surface scattering cross section as a constraint is presented (Josset et al, 2010).

Raymond R Rogers↗
NASA NTRSDate not supplied

TPSAS-NF1676L-17867-DND

In response to the exponential growth in science data analysis and visualization capabilities, data centers have been developing new processes to package and deliver large volumes of aggregated subsets of archived data. New standards are evolving to help data providers and application programmers manage the growing needs of the science community. These standards evolve from the best practices gleaned from new products and capabilities. The NASA Atmospheric Sciences Data Center (ASDC) has developed and deployed production provider-specific search and subset web applications for the CALIPSO, CERES, TES, and MOPITT missions. This presentation explores a CERES CCCM (CALIPSO, CloudSat, CERES, MODIS) data validation use case that leverages aggregated subset results from CERES CCCM (Level2), CERES SSF (Level2), and CALIPSO LIDAR (Level) datasets. Additionally, it examines the standards and formats that ASDC developers have applied to the delivered files as well as the implementation strategies for subsetting and processing the aggregated products.

Walter E Baskin↗
NASA NTRSDate not supplied

TPSAS-NF1676L-20398-DND

Arctic sea ice is melting at an alarming rate. Many factors influence the acceleration of Arctic sea ice loss e.g., atmospheric and ocean heat transport, circulation patterns, and atmospheric thermodynamic state. Arctic low clouds, however, have been shown to play an especially important role in sea ice extent variability. Due to the nature of clouds, changes in Arctic sea ice cover can profoundly influence cloud characteristics as well. How does the interaction with clouds influence sea ice extent? This question is studied using state-of-the-art NASA satellite observations from CALIPSO, CloudSAT, and CERES. The results indicate that the response of clouds to changing sea ice act to inhibit summer time melting and accelerate winter time growth buffering sea ice loss. Thus, clouds serve as a protector of sea ice.

Patrick C Taylor↗
NASA NTRSDate not supplied

TPSAS-NF1676L-23557-DND

The Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) measures both parallel and perpendicular backscatter of linearly polarized 532 nm light from cloud particles in the atmosphere. The perpendicular component of the return signal allows differentiation between cloud layers consisting of spherical water droplets from those with non-spherical ice particles. A two-way distribution of layer-integrated 532 nm total backscatter and the layer-integrated 532 nm depolarization ratio further differentiates between water cloud layers with significant multiple scattering, horizontally-oriented ice particles that cause specular reflections, and randomly-oriented ice particles, as described in Hu et al., 2009. The cloud phase algorithm functions well for the majority of clouds, but there have been some recent changes and improvements that are described in this poster. The impact of the CALIOP viewing angle change from near-nadir (0.3 degrees) to slightly tilted (3.0 degrees) on the optical properties of the various CALIOP cloud particle phases is also shown. A major improvement to the phase algorithm is the limitation of a spatial coherence test for horizontally-oriented ice to cloud layers that have sufficient integrated attenuated backscatter to likely contain HOI. This change reduces a "striping" effect caused by noisiness in the spatial coherence test for thin cloud layers. Additional temperature tests are considered, and the regional and vertical distribution of cloud layers with the various CALIOP cloud phases is shown. Only one cloud particle phase is allowed for each 5 km portion of a cloud layer that is considered by the cloud phase algorithm, so we use in situ aircraft and CloudSat observations to determine how the CALIOP cloud phase algorithm is treating optically and thermally thick clouds, which may be mixed-phase.

Melody Avery↗
NASA NTRS2017

TPSAS-NF1676L-26925-DND

Observationally-based atmospheric energy balance is analyzed using Clouds and the Earth's Radiant Energy System (CERES)-derived TOA and surface irradiance, Global Precipitation Climatology Project (GPCP)-derived precipitation, dry static and kinetic energy tendency and divergence estimated from ERA-Interim, and surface sensible heat flux from SeaFlux. The residual tends to be negative over tropics and positive over mid-latitudes. A negative residual implies that precipitation rate is too small, divergence is too large, or radiative cooling is too large. The residual of atmospheric energy is spatially and temporally correlated with cloud objects to identify cloud types associated with the residual. Spatially, shallow cumulus, cirrostratus, and deep convective cloud object occurrence are positively correlated with the absolute value of the residual. The temporal correlation coefficient between the number of deep convective cloud objects and individual energy components, net atmospheric irradiance, precipitation rate, and the sum of dry static and kinetic energy divergence and their tendency over western Pacific are, respectively, 0.84, 0.95, and 0.93. However, when all energy components are added, the atmospheric energy residual over tropical Pacific temporally correlates well with the number of shallow cumulus cloud objects over tropical Pacific. Because shallow cumulus does not alter enough atmospheric energy compared to the residual, these suggest 1) if retrieval errors associated with deep convective clouds are causing the column integrated atmospheric energy residual, the errors vary among individual deep convective clouds, 2) it is possible that the residual is associated with processes in which shallow cumulus clouds affect deep convective clouds and hence atmospheric energy budget over tropical western Pacific, and 3) it is also possible that cumulus congestus present cirrostratus that missed in massive sensor retrieval contribute the residual. Cloud objects used in the study that leads to the above conclusions are derived from Moderate Resolution Imaging Spectroradiometer (MODIS). In this investigation, we use Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) and CloudSat data to evaluate and verify above findings. Specifically, we focus on 3) above and analyze frequency of occurrence of cumulus congestus present under cirrostratus and correlation to the energy balance residual.

Seiji Kato↗
NASA NTRSDate not supplied

TPSAS-NF1676L-27419-DND

Overview of CALIPSO Mission Launched: April 28, 2006 with CloudSat Satellite Instruments: CALIOP Lidar, Imaging Infrared Radiometer, Wide-Field Camera CALIOP: provides lidar measurements of aerosols and clouds Operational Achievements: - Long term measurements: CALIOP collected more than 10 years of measurements so far; - Observations during day/night and for all seasons - Data publicly available - CALIOP Adds the Vertical Dimension

Xiaomei Lu↗
NASA NTRS2020

Linkage among Ice Crystal Microphysics, Mesoscale Dynamics and Cloud and Precipitation Structures Revealed By Collocated Microwave Radiometer and Multi-Frequency Radar Observations

Ice clouds and falling snow are ubiquitous globally and play important roles in the Earth’s radiation budget and precipitation processes. Ice particle microphysical properties (e.g., size, habit and orientation) are not only influenced by ambient environment’s dynamic and thermodynamic conditions, but also intimately connect to the cloud radiative effects and particle fall speeds, which therefore impact up to the future climate projection and down to the details of the surface precipitation (e.g., onset-time, location, type and strength). Our previous work revealed that high-frequency Polarimetric radiance Difference (PD) from passive microwave sensors is a good indicator of the bulk aspect ratio of horizontally oriented ice particles that are often occur inside anvil clouds and/or stratiform precipitations. In this current work, we further investigate the dynamic/thermodynamic mechanisms and cloud/precipitation structures associated with ice-phase microphysics corresponding to different PD signals. In order to do so, collocated CloudSat radar (W-band) and Global Precipitation Measurement Dual-frequency Precipitation Radar (GPM-DPR, Ku/Ka bands) observations as well as European Centre for Medium-Range Weather Forecasts (ECMWF) atmosphere background profiles are grouped according to the magnitude of PD for only stratiform precipitation and/or anvil cloud scenes. We found that horizontally-oriented snow aggregates or large snow particles are likely the major contributor to the high-PD signals at 166 GHz, while low-PD magnitudes can be attributed to small cloud ice, randomly oriented snow aggregates, riming snow or super-cooled water. Further, high (low) PD scenes are found to be associated with stronger (weaker) wind shear and higher (lower) ambient humidity, both of which help promote (prohibit) the growth of frozen particles and the organization of convective systems. An ensemble of squall line cases is studied at the end to demonstrate that the PD asymmetry in the leading and trailing edges of the deep convection line is closely tied to the anvil cloud and stratiform precipitation layers respectively, suggesting the potential usefulness of PD as a proxy of stratiform/convective precipitation flag, as well as a proxy of convection life stage.

Ice crystal microphysics↗
NASA NTRSDate not supplied

The Next-Generation Version 3 GPCP Products

The long-standing Global Precipitation Climatology Project (GPCP) recently introduced its next-generation Version 3.1 Monthly product, , which covers the period 1983-2019. Notable improvements include higher spatial resolution (0.5°x0.5°), geosynchronous IR estimates extended to the latitude band 60°N-S and based on the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks-Climate Data Record (PERSIANN-CDR) algorithm, and high-latitude (outside 60ºN-S) precipitation estimates based on improved calibrations of Television-Infrared Operational Satellite (TIROS) Operational Vertical Sounder (TOVS) and Advanced Infrared Sounder (AIRS) data. The satellite-only estimate is adjusted to the best available monthly climatologies, namely the Tropical Combined Climatology (TCC) at lower latitudes and the Merged CloudSat, TRMM, and GPM (MCTG) climatology at higher latitudes. Finally, V3.1 merges these climatologically-adjusted satellite-only estimates with the Global Precipitation Climatology Centre (GPCC) gauge analyses at 1°x1°. In addition to the V3.1 Monthly product, the GPCP team is working towards a global Version 3 Daily product based on Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM) mission (IMERG) Final Run V06 estimates, where available, calibrated to the GPCP V3.1 Monthly estimate. Rescaled TOVS/AIRS data are used in high-latitude areas that lack IMERG estimates, which occur over snowy/icy surfaces outside 60°N-S. Since IMERG currently extends back to June 2000, daily PERSIANN-CDR data are used for the period January 1983–May 2000 to complete the record. This presentation will provide early results for, and the latest status of, the Monthly and Daily GPCP products as a function of time and region. Key points include examining homogeneity over time and across boundaries between input datasets. One goal is to determine the suitability of the V3 products while we continue to produce the Version 2 GPCP products for on-going use.

precipitation↗
NASA NTRS2020

Intercomparison of Precipitation Estimates Over the Southern Ocean from Atmospheric Reanalyses

Precipitation is a major component of the hydrologic cycle and plays a significant role in the sea-ice mass balance in the polar regions. Over the Southern Ocean, precipitation is particularly uncertain due to the lack of direct observations in this remote and harsh environment. Here we demonstrate that precipitation estimates from 8 global reanalyses produce similar spatial patterns between 2000-2010, although their annual means vary by about 250 mm yr -1 (or 26 percent of the median values) and there is little similarity in their representation of interannual variability. ERA-Interim produces the smallest and CFSR produces the largest amount of precipitation overall. Rainfall and snowfall are partitioned in five reanalyses; snowfall suffers from the same issues as the total precipitation comparison, with ERA-Interim producing about 128 mm less snowfall and JRA-55 about 103 mm more rainfall compared to the other reanalyses. When compared to CloudSat-derived snowfall, these five reanalyses indicate similar spatial patterns, but differ in their magnitude. All reanalyses indicate precipitation on nearly every day of the year, with spurious values occurring on an average of about 60 days yr -1 resulting in an accumulation of about 4.5 mm yr -1 . While similarities in spatial patterns among the reanalyses suggest a convergence, the large spread in magnitudes points to issues with the background models in adequately reproducing precipitation rates, and the differences in the model physics employed. Further improvements to model physics are required to achieve confidence in precipitation rate, as well as the phase and frequency of precipitation in these products.

Linette N. Boisvert↗
NASA NTRSDate not supplied

Convective Transport and Evolution of Clouds and aerosols in the Asian Summer Monsoon Region

The existence of a persistent layer in the lowermost stratosphere in the Asian Monsoon region is well-known and has been observed by satellites and also in situ by balloon-borne sensors. This aerosol layer has been observed to persist every year by both SAGE sensors and by CALIOP, between the tropopause and the lower boundary of the Junge stratospheric sulfate layer. But how does this layer form and why? Apparently, aerosols are lofted by convection form the Indian and Asian continents, into the upper troposphere/lower stratosphere (UT/LS) area in the middle of a persistent anticyclone associate with the Asian summer monsoon. But some mysteries remain. The top of this aerosol layer is well above the altitude of maximum convective outflow, so why is the top of the aerosol layer so high? Are the aerosols coming from China or from India? And finally, is there an observable impact of these aerosol on thin cirrus distributions in the UT/LS? We explore the interesting difference in altitude between the ATAL layer and the convective cloud top height, using observations from CALIOP and from SAGE. In the process of doing this we examine the accuracy of both CALIOP and SAGE cloud/aerosol discrimination, and the impact of various averaging lengths. We compare the apparent "observational tropopause" with observations from COSMIC, CALIOP (clouds), and with modeled interpolation from MERRA-2. We also compare CALIOP and CloudSat daytime cloud top heights for convective clouds with the vertical aerosol distribution, and evaluate convection in this region as represented by MERRA-2. Finally, and maybe most importantly we compare convective cloud top heights and temperatures with diurnal variability during the most recent years by using observations from the geostationary Himawari satellite. How representative are the twice-daily A-Train observations, when compared to the natural diurnal variability of convection? The goal is to establish the origins of these UT/LS aerosols, whether these aerosol distributions can be completely explained by convective transport, and to evaluate convective lofting of aerosol by models. Ultimately, the convective lofting of aerosols as modeled is needed to explain the Asian Monsoon aerosol distributions. The observations contribute much-needed information to enhance the model accuracy.

clouds↗
NASA NTRS2021

Modeling the Radiative Effect on Microphysics in Cirrus Clouds against Satellite Observations

The radiative effect on microphysics 23 (REM) plays an important role in the dew/frost formation near the surface. How REM impacts cirrus clouds is investigated in this paper, using bin microphysical model simulations and coincident data of the CloudSat and Global Precipitation Measurement (GPM) satellites. REM affects ice crystal spectrum with two types: radiative cooling and warming. Radiative cooling, as predicted by the bin model simulations, favors the formation of horizontally oriented ice crystals (HOICs), but radiative warming does not. Hence, a test of REM can be transformed to a test of HOICs, because HOICs can be measured by the microwave polarization observations of the GPM Microwave Imager (GMI) at 166 GHz. To analyze the GMI data for their HOIC distribution, clouds are sorted into four groups with different optical depth and altitude, based on the radiative cooling/warming ratio (or eta) computed with satellite-retrieved ice water content. Their HOIC distributions (e.g., the mid-level thick clouds have more HOICs than the high-level ones) agree well with those predicted by the bin model simulations. The general agreement between the GMI observations and bin model simulations suggests that REM is common in cirrus clouds and impacts cirrus clouds significantly.

microphysics↗
NASA NTRS2021

Modeling the Radiative Effect on Microphysics in Cirrus Clouds Against Satellite Observations

The radiative effect on microphysics (REM) plays an important role in the dew/frost formation near the surface. How REM impacts cirrus clouds is investigated in this study, using bin microphysical model simulations and coincident data of the CloudSat and Global Precipitation Measurement (GPM) satellites. REM affects ice crystal spectrum with two types: radiative cooling and warming. Radiative cooling, as predicted by the bin-model simulations, favors the formation of horizontally oriented ice crystals (HOICs), but radiative warming does not. Hence, a test of REM can be transformed to a test of HOICs, because HOICs can be measured by the microwave polarization observations of the GPM Microwave Imager (GMI) at 166 GHz. To analyze the GMI data for their HOIC distribution, clouds are sorted into four groups with different optical depth and altitude, based on the radiative cooling/warming ratio (or eta) computed with satellite-retrieved ice water content. Their HOIC distributions (e.g., the midlevel thick clouds have more HOICs than the high-level ones) agree well with those predicted by the bin-model simulations. The general agreement between the GMI observations and bin-model simulations suggests that REM is common in cirrus clouds and impacts cirrus clouds significantly.

clouds↗