Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Diffusion barrier properties of amorphous and nanocrystalline Ta films for Cu interconnects

In the present paper, the diffusion barrier properties of amorphous and nanocrystalline (NC) Ta films, and the interface microstructure of Ta/Cu were investigated as a function of annealing temperature. X-ray diffraction, scanning electron microscopy, cross-sectional transmission electron microscopy, and energy-dispersive spectrometer line scans were employed to study the microstructure evolution and diffusion behavior. It was found that an amorphous layer with a thickness of approx5 nm formed at the interface of NC Ta/Cu at 450 deg. C annealing, while the interface of amorphous-Ta/Cu was still abrupt. Moreover, amorphous-Ta film acts as an effective diffusion barrier up to temperatures of 650 deg. C, which is higher than that for NC-Ta film. The fast diffusion along grain boundaries inside NC-Ta films is suggested to be responsible for the main failure of NC-Ta film.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Substrate orientation effects on the nucleation and growth of the M{sub n+1}AX{sub n} phase Ti{sub 2}AlC

The M{sub n+1}AX{sub n} (MAX) phases are ternary compounds comprising alternating layers of a transition metal carbide or nitride and a third ''A-group'' element. The effect of substrate orientation on the growth of Ti{sub 2}AlC MAX phase films was investigated by studying pulsed cathodic arc deposited samples grown on sapphire cut along the (0001), (1010), and (1102) crystallographic planes. Characterization of these samples was by x-ray diffraction, atomic force microscopy, and cross-sectional transmission electron microscopy. On the (1010) substrate, tilted (1018) growth of Ti{sub 2}AlC was found, such that the TiC octahedra of the MAX phase structure have the same orientation as a spontaneously formed epitaxial TiC sublayer, preserving the typical TiC-Ti{sub 2}AlC epitaxial relationship and confirming the importance of this relationship in determining MAX phase film orientation. An additional component of Ti{sub 2}AlC with tilted fiber texture was observed in this sample; tilted fiber texture, or axiotaxy, has not previously been seen in MAX phase films.

36 MATERIALS SCIENCE↗

Electron back scattered diffraction characterization of Sm(CoFeCuZr){sub z} magnets

In permanent magnets based on the Sm{sub 2}Co{sub 17} phase, the high coercivity depends on the presence of a complex microstructure, consisting of a Sm{sub 2}(Co,Fe){sub 17} cell phase, a cell boundary phase Sm(Co,Cu){sub 5}, and a Zr-rich platelet or lamellae phase. The aim of this work is to use electron back scatter diffraction (EBSD) in order to identify the different phases present in the isotropic magnets produced from cast alloys with the composition of Sm(Co{sub bal}Fe{sub 0.2}Cu{sub 0.1}Zr{sub x}){sub 8}, where x = 0, 0.02, or 0.06, and correlate them with the different phases observed in scanning electron microscopy (SEM) images. Due to the combination of careful surface preparation and high resolution microscopy, it was possible to observe the cellular structure characteristic of the 2:17 magnets in the SEM images. Until now, only transmission electron microscopy (TEM) had been used. Composition maps, energy dispersive spectroscopy (EDS), and EBSD measurements were used for doing the phase identification.

36 MATERIALS SCIENCE↗

Coherent growth of GaGdN layers with high Gd concentration on GaN(0001)

We report on the coherent growth of GaGdN with high Gd concentration on a GaN template using radio-frequency plasma-assisted molecular beam epitaxy under elevated growth conditions. X-ray diffraction and cross-sectional transmission electron microscopy observations revealed that at a growth temperature of 700 {sup Degree-Sign }C or below, GaGdN layers are coherently grown on the GaN templates without segregation of the secondary phases. As the GdN mole fraction x was increased to 0.08, the c-axis lattice parameter in Ga{sub 1-x}Gd{sub x}N increased linearly. Increasing the growth temperature to 750 {sup Degree-Sign }C causes lattice relaxation in GaGdN. All GaGdN samples exhibited photoluminescence emissions near the band-edge, a blue luminescence band emission, and a green luminescence band emission. The origin of the green luminescence band emission is discussed in relation to the compressive strain existing in the GaGdN layers coherently grown on GaN.

36 MATERIALS SCIENCE↗

XRD line-broadening characteristics of M-oxides (M = Mg, Mg-Al, Y, Fe) nanoparticles produced by coprecipitation method

Simple coprecipitation method has been used to produce nanoparticles of MgO (magnesia), MgO{center_dot}Al{sub 2}O{sub 3}(spinel), Y{sub 2}O{sub 3}(yttria) and Fe{sub 3}O{sub 4}(ferrite). The raw materials were, in respective, magnesium powder, magnesium and aluminium powders, ytrria powder, and natural sand. The coprecipitation included the use of suitable acid and base to dissolve the powders or sand and to produce precipitates, as well as the use of water to wash and purify the precipitates, and drying at relatively low temperatures, namely lower than 100 deg. C, followed by heating at 450 deg. C, 750 deg. C, 600 deg. C and 200 deg. C to produce magnesia, spinel, yttria and ferrite nanopowders, respectively. X-ray diffractometry was used to characterise the purity and nanocrystallinity of the final powders. It was found qualitatively that the powders were of high purity. Further line-broadening analysis using single-line and Rietveld-based softwares was performed to reveal the nanocrystallinity of the powders. Different line breadth values were found for the powders, indicating different crystallite sizes. It was also found that, particularly for spinel and yttria, the diffraction peaks exhibited 'longer' tails, indicating broader crystallite size distribution. The average crystallite size for the powders ranged from 3 to 70 nm. The results could then be used as 'fingerprints' for nanocrystallinity using x-ray diffractometry. The XRD crystallite sizes for yttria and ferrite nanocrystals are in fair agreement with their counterparts from electron microscopy observation.

36 MATERIALS SCIENCE↗

Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash

The effect of minor additions of limestone powder on the properties of fly ash blended cements was investigated in this study using isothermal calorimetry, thermogravimetry (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) techniques, and pore solution analysis. The presence of limestone powder led to the formation of hemi- and monocarbonate and to a stabilisation of ettringite compared to the limestone-free cements, where a part of the ettringite converted to monosulphate. Thus, the presence of 5% of limestone led to an increase of the volume of the hydrates, as visible in the increase in chemical shrinkage, and an increase in compressive strength. This effect was amplified for the fly ash/limestone blended cements due to the additional alumina provided by the fly ash reaction.

36 MATERIALS SCIENCE↗

Influence of high power impulse magnetron sputtering plasma ionization on the microstructure of TiN thin films

HIPIMS (High Power Impulse Magnetron Sputtering) discharge is a new PVD technology for the deposition of high-quality thin films. The deposition flux contains a high degree of metal ionization and nitrogen dissociation. The microstructure of HIPIMS-deposited nitride films is denser compared to conventional sputter technologies. However, the mechanisms acting on the microstructure, texture and properties have not been discussed in detail so far. In this study, the growth of TiN by HIPIMS of Ti in mixed Ar and N{sub 2} atmosphere has been investigated. Varying degrees of metal ionization and nitrogen dissociation were produced by increasing the peak discharge current (I{sub d}) from 5 to 30 A. The average power was maintained constant by adjusting the frequency. Mass spectrometry measurements of the deposition flux revealed a high content of ionized film-forming species, such as Ti{sup 1+}, Ti{sup 2+} and atomic nitrogen N{sup 1+}. Ti{sup 1+} ions with energies up to 50 eV were detected during the pulse with reducing energy in the pulse-off times. Langmuir probe measurements showed that the peak plasma density during the pulse was 3 x 10{sup 16} m{sup -3}. Plasma density, and ion flux ratios of N{sup 1+}: N{sub 2}{sup 1+} and Ti{sup 1+}: Ti{sup 0} increased linearly with peak current. The ratios exceeded 1 at 30 A. TiN films deposited by HIPIMS were analyzed by X-ray diffraction, and transmission electron microscopy. At high I{sub d}, N{sup 1+}: N{sub 2}{sup 1+} > 1 and Ti{sup 1+}: Ti{sup 0} > 1 were produced; a strong 002 texture was present and column boundaries in the films were atomically tight. As I{sub d} reduced and N{sup 1+}: N{sub 2}{sup 1+} and Ti{sup 1+}: Ti{sup 0} dropped below 1, the film texture switched to strong 111 with a dense structure. At very low I{sub d}, porosity between columns developed. The effects of the significant activation of the deposition flux observed in the HIPIMS discharge on the film texture, microstructure, morphology and properties are discussed.

36 MATERIALS SCIENCE↗

Nanoindentation Studies Of Hard Nanocomposite Ti-B-N Thin Films

Titanium boron nitride (Ti-B-N) films were deposited by reactive magnetron sputtering using single Titanium diboride (TiB{sub 2}) target in different Ar-N{sub 2} gas mixtures. The influence of N{sub 2}:Ar ratio on the microstructure and mechanical properties of the deposited films have been investigated. Atomic force microscopy analysis indicated the grain size decreases with incorporation of nitrogen in the films. Nanoindentation studies have shown the hardness decreases with nitrogen incorporation.

36 MATERIALS SCIENCE↗

Effects of Au layer thickness and number of bilayers on the properties of Au/ZnO multilayers

Multilayered films of Au/ZnO were prepared by physical vapor deposition. Varying the Au thickness, t{sub Au}, and the number of bilayers, n, allowed us to investigate the role of these parameters on the sample structural and electronic properties. X-ray diffraction, X-ray absorption spectroscopy, grazing incidence small angle X-ray scattering and transmission electron microscopy experiments, have been combined to UV-visible and infrared spectroscopy to characterize the multilayers in the as-prepared state and after annealing. In the as-prepared state, the strong Au and ZnO lattice interaction leads to ZnO epitaxy on Au. Gold appears either as continuous layers or in form of nanoparticles. ZnO experiences a structural transformation from wurztite to rock salt monitored by the Au morphology. Annealing at 500 deg. C destroys the lattice matching. The electronic and optical properties of the systems are understood in line with the Au morphology and ZnO structural state.

36 MATERIALS SCIENCE↗

Two-step synthesis of Bi{sub 2}Te{sub 3}-Te nanoarrays with sheet-rod multiple heterostructure

Bi{sub 2}Te{sub 3}-Te arrays with sheet-rod multiple heterostructure were obtained in large scale, using Te nanorod arrays as the in-situ templates under solvothermal process. The array is formed by the ordered Bi{sub 2}Te{sub 3}-Te rods where Bi{sub 2}Te{sub 3} sheets distribute from the top face to the bottom face along the Te rod vertically. The microstructure of the heterostructure was studied through X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The electrical conductivity and Seebeck coefficient of the arrays were also studied. The course of reaction was monitored so as to propose a possible growth mechanism of such novel heterostructure. The key for the preparation of such heterostructure is to balance the velocity between the dissolution of Te rods and the formation of Bi{sub 2}Te{sub 3} sheets. This synthetic approach could be promising to prepare self-assembled low-dimensional nanoarrays of metals and semiconductors with high yield. - Graphical abstract: Bi{sub 2}Te{sub 3}-Te arrays with sheet-rod multiple heterostructure were obtained in a large scale using Te nanorod arrays as the in-situ templates under the solvothermal process. Display Omitted

36 MATERIALS SCIENCE↗

TiO{sub 2} nanoparticles incorporated with CuInS{sub 2} clusters: preparation and photocatalytic activity for degradation of 4-nitrophenol

TiO{sub 2} nanoparticles incorporated with CuInS{sub 2} clusters were prepared in a solvothermal process and characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), and energy-dispersion X-ray analysis (EDX). Compared with pure TiO{sub 2} nanoparticles, the TiO{sub 2} nanoparticles incorporated with CuInS{sub 2} clusters display higher photocatalytic activity with 99.9% of degradation ratio of 4-nitrophenol after 2 h irradiation. In order to investigate the effect of the CuInS{sub 2} clusters on the photocatalytic activity of TiO{sub 2} nanoparticles, diffuse reflectance UV-Vis spectra (DRS), photoluminescence (PL) spectra, and photocurrent action spectra were measured. The results indicate that the enhanced photocatalytic activity is probably due to the interface between TiO{sub 2} and CuInS{sub 2} as a trap of the photogenerated electrons to decrease the recombination of electrons and holes. - Graphical abstract: Kinetic curves of 4-nitrophenol (1.44x10{sup -4} mol L{sup -1}) degradation under UV irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photochemical preparation of CdS hollow microspheres at room temperature and their use in visible-light photocatalysis

CdS hollow microspheres have been successfully prepared by a photochemical preparation technology at room temperature, using polystyrene latex particles as templates, CdSO{sub 4} as cadmium source and Na{sub 2}S{sub 2}O{sub 3} as both sulphur source and photo-initiator. The process involved the deposition of CdS nanoparticles on the surface of polystyrene latex particles under the irradiation of an 8 W UV lamp and the subsequent removal of the latex particles by dispersing in dichloromethane. Photochemical reactions at the sphere/solution interface should be responsible for the formation of hollow spheres. The as-prepared products were characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. Such hollow spheres could be used in photocatalysis and showed high photocatalytic activities in photodegradation of methyl blue (MB) in the presence of H{sub 2}O{sub 2}. The method is green, simple, universal and can be extended to prepare other sulphide and oxide hollow spheres. -- Graphical abstract: Taking polystyrene spheres dispersed in a precursor solution as templates, CdS hollow microspheres composed of nanoparticles were successfully prepared via a new photochemical route at room temperature. Display Omitted Research highlights: {yields} Photochemical method was first employed to prepare hollow microspheres. {yields} CdS hollow spheres were first prepared at room temperature using latex spheres. {yields} The polystyrene spheres used as templates were not modified with special groups. {yields}The CdS hollow microspheres showed high visible-light photocatalytic activities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phase transformations induced by high electronic excitation in ion-irradiated Gd{sub 2}(Zr{sub x}Ti{sub 1-x}){sub 2}O{sub 7} pyrochlores

The pyrochlore oxides (A{sub 2}B{sub 2}O{sub 7}) exhibit a remarkable range of structural, physical, and magnetic properties related to their various chemical compositions. This article reports the phase transformations induced by high electronic excitation in pyrochlores of the Gd{sub 2}(Zr{sub x}Ti{sub 1-x}){sub 2}O{sub 7} family irradiated with swift ions. The structural changes, investigated by using several analytical techniques (x-ray diffraction, Raman spectroscopy, and transmission electron microscopy), strongly depend on the chemical composition. The high electronic excitation along the ion trajectory results in the amorphization of ion tracks for Gd{sub 2}Ti{sub 2}O{sub 7} and Gd{sub 2}TiZrO{sub 7}, whereas a defective fluorite structure is formed in Gd{sub 2}Zr{sub 2}O{sub 7}. Moreover, the results underline the existence of an electronic stopping power threshold of 6 keV/nm for amorphizable compounds and 10 keV/nm for Gd{sub 2}Zr{sub 2}O{sub 7}, below which phase transformations do not occur. Finally, the study of the thermal recovery of irradiated pyrochlores provides the recrystallization temperature for amorphized samples and reveals differences in the recovery process which are related to the chemical composition.

36 MATERIALS SCIENCE↗

Nano-Hydroxyapatite/Fluoridated and Unfluoridated Bioactive Glass Composites: Structural Analysis and Bioactivity Evaluation

Biphasic bioceramic composites containing nano-hydroxyapatite (HAP) and nanosized bioactive glasses have been prepared in the form of pellets and have been examined for the effects of bioglass concentrations and sintering temperature on the structural transformations and bioactivity behavior. Pure stoichiometric nano-HAP was synthesized using sol-gel technique. Two bioglasses synthesized in this work--fluoridated bioglass (Cao-P{sub 2}O{sub 5}-Na{sub 2}O{sub 3}-CaF{sub 2}) and unfluoridated bioglass (Cao-P{sub 2}O{sub 5}-Na{sub 2}O{sub 3}) designated as FBG and UFBG respectively, were added to nano-HAP with concentrations of 5, 10, 12 and 15%. The average particle sizes of synthesized HAP and bioglasses were 23 nm and 35 nm, respectively. The pellets were sintered at four different temperatures i.e. 1000 deg. C, 1150 deg. C, 1250 deg. C and 1350 deg. C. The investigations involved study of structural and bioactivity behavior of green and sintered pellets and their deviations from original materials i.e. HAP, FBG and UFBG, using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The phase composition of the sintered pellets was found to be non-stoichiometric HAP with {alpha}-TCP (tricalcium phosphate) and {beta}-TCP. It was revealed from SEM images that bonding mechanism was mainly solid state sintering for all pellets sintered at 1000 deg. C and 1150 deg. C and also for pellets with lower concentrations of bioglass i.e. 5% and 10% sintered at 1250 deg. C. Partly liquid phase sintering was observed for pellets with higher bioglass concentrations of 12% and 15% sintered at 1250 deg. C and same behaviour was noted for pellets at all concentrations of bioglasses at 1350 deg. C. The sintered density, hardness and compression strength of pellets have been influenced both by the concentration of the bioglasses and sintering temperature. It was observed that the biological HAP layer formation was faster on the green pellets surface than on pure HAP and sintered pellets, showing higher bioactivity in the green pellets.

36 MATERIALS SCIENCE↗

Boron and nitrogen-codoped TiO{sub 2} nanorods: Synthesis, characterization, and photoelectrochemical properties

Boron and nitrogen codoped TiO{sub 2} nanorods (BNTRs) were synthesized via two-step hydrothermal reactions using TiN as a starting material. The as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscope (SEM), transmission electron microscopy and X-ray photoelectron spectroscopy techniques. The results showed that TiO{sub 2} nanorods with the diameter of approximately 50-100 nm and the length of several micrometers were doped by the interstitial N and B. The nanorods were firstly formed in the hydrothermal synthesis of nitrogen doped TiO{sub 2}. The growing process of nanorods was observed by SEM and a most probable formation mechanism of the trititanate nanorods was proposed. The BNTRs showed a higher photocatalytic activity and a bigger photocurrent response than N-TiO{sub 2} nanorods under visible light irradiation. - Graphical abstract: Boron and nitrogen codoped TiO{sub 2} nanorods (BNTRs) were synthesized using TiN. The BNTRs showed a higher photocatalytic activity and a bigger photocurrent than N-TiO{sub 2} nanorods (NTRs) under visible light irradiation. Highlights: > Novel B- and N-codoped TiO{sub 2} nanorods (BNTRs) are designed and synthesized. > A most probable formation mechanism of the trititanate nanorods is proposed. > The BNTRs show an outstanding photocurrent response under visible light. > The BNTRs exhibit an improved visible light photocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and textural evolution of alumina particles with mesoporous structures

Alumina particles with mesostructures were synthesized through a chemical precipitation method by using different inorganic aluminum salts followed by a heterogeneous azeotropic distillation and calcination process. The obtained mesoporous {gamma}-alumina particles were systematically characterized by the X-ray diffraction, transmission electron microscopy and nitrogen adsorption-desorption measurement. Effects of the aluminum salt counter anion, pH value and the azeotropic distillation process on the structural or textural evolution of alumina particles were investigated. It is found that Cl{sup -} in the reaction solution can restrain the textural evolution of the resultant precipitates into two-dimensional crystallized pseudoboehmite lamellae during the heterogeneous azeotropic distillation, and then transformed into {gamma}-Al{sub 2}O{sub 3} particles with mesostructures after further calcination at 1173 K, whereas coexisting SO{sub 4}{sup 2-} can promote above morphology evolution and then transformed into {gamma}-Al{sub 2}O{sub 3} nanofibers after calcination at 1173 K. Moreover nearly all materials retain relatively high specific surface areas larger than 100 m{sup 2} g{sup -1} even after calcinations at 1173 K. - Graphical abstract: Co-existing Cl{sup -} is beneficial for the formation of {gamma}-alumina nanoparticles with mesostructures during the precipitation process. Interparticle and intraparticle mesopores can be derived from acidic solution and near neutral solution, respectively.

36 MATERIALS SCIENCE↗

Utilization of iron oxide film obtained by CVD process as catalyst to carbon nanotubes growth

Thin films of Fe{sub 2}O{sub 3} were obtained on silica glass substrates through the thermal decomposition of ferrocene in air. These films were characterized by Raman spectroscopy and X-ray diffractometry (XRD), and subsequently used as catalyst on the growth of carbon nanotubes, using benzene or a benzene solution of [Fe{sub 3}(CO){sub 12}] as precursor. A great amount of a black powder was obtained as product, identified as multi-walled carbon nanotubes by XRD, Raman spectroscopy and transmission electron microscopy. The carbon nanotubes formed through the pyrolysis of the [Fe{sub 3}(CO){sub 12}] solution were identified as structurally better than the one obtained by the pyrolysis of pristine benzene. - Graphical abstract: Thin films of Fe{sub 2}O{sub 3} were obtained on silica glass substrates through the thermal decomposition of ferrocene in air, and subsequently used as catalyst on the growth of carbon nanotubes.

36 MATERIALS SCIENCE↗

Structural and optical properties of low-temperature hydride-MOCVD AlGaAs/GaAs(100) heterostructures based on omission solid solutions

X-ray diffraction, scanning electron microscopy, and IR reflectance spectroscopy were used to study properties of epitaxial low-temperature hydride-MOCVD AlGaAs/GaAs (100) heterostructures. It was found that the variation in the AlGaAs alloy lattice's parameter with Al content does not obey the classical Vegard's law, and the lattice parameters are smaller than those of GaAs.

36 MATERIALS SCIENCE↗