Search NASA⌕ Search

SEARCH · Search NASA

Results for “cold temperatures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A radiant heating test facility for space shuttle orbiter thermal protection system certification

A large scale radiant heating test facility was constructed so that thermal certification tests can be performed on the new generation of thermal protection systems developed for the space shuttle orbiter. This facility simulates surface thermal gradients, onorbit cold-soak temperatures down to 200 K, entry heating temperatures to 1710 K in an oxidizing environment, and the dynamic entry pressure environment. The capabilities of the facility and the development of new test equipment are presented.

Sherborne, W. D.↗

Line parameters of methane from 2385 to 3200/cm

A list of new methane line parameters for the 2385-3200 cm region included in the Air Force Geophysical Laboratory's compilation of molecular line parameters is presented. Line positions were determined by computer computations from Fourier transform spectrometer data using a Kitt Peak subroutine. With the exception of class IV lines, all line strengths were determined by the method of equivalent widths. Additional line strengths were measured from spectra taken at cold sample temperatures so that lower state transition energies could be determined experimentally. Observed line positions and strengths are given for 8076 absorptions with strengths greater than 3.3 x 10 to the -24 cm/molecule.

Toth, R. A.↗

An experimental investigation into the feasibility of a thermoelectric heat flux gage

An experiment was conducted to determine the feasibility of using a commerically available thermoelectric device as a heat flux gage. In certain research applications, the thermoelectric heat flux gage can provide a relatively simple means to model a warm fluid--cold wall. The experiment showed that heat flux through the gage could be correlated within two percent to the applied thermoelectric current through the device and the hot and cold side temperature with a simple algebraic equation.

Jones, J. C.↗

Statistics of cold cumulonimbus anvils based on enhanced infrared photographs

Infrared photographs from the Atlantic Geosynchronous Satellite, enhanced to resolve cold anvil temperatures of tropical clouds, are analyzed statistically to determine their spatial-temporal variability during the NASA-U2 Flight Experiment of 1980. Diurnal dependence varies regionally, indicating topographic control via low level convergence and release of convective instability. Anvil growth rates, area covered and duration are discussed for individual and merging anvil systems. Gradients of anvil temperatures implied by infrared photographs are shown to be caused, in part, by radial decrease in anvil depth, i.e., to emissivities less than 1. An error in cloud top temperature of 10C is caused by 10% reduction in emissivity. Errors are near zero in dense, actively growing portions of the anvil.

Danielsen, E. F.↗

Experimental feasibility study of a thermoelectric heat flux gage

An experiment was conducted to determine the feasibility of using a commercially available thermoelectric device as a heat flux gage at near ambient conditions. In certain research applications, the thermoelectric heat flux gage can provide a relatively simple means to model a warm fluid cold wall convection environment. The experiment showed that heat flux through the gage could be correlated within 2.5 percent with a simple algebraic equation which considered the thermoelectric current through the device and the hot and cold side temperatures.

Vanfossen, G. J.↗

Applications of stereoscopic height computations from dual geosynchronous satellite data/joint NASA-Japan stereo project

Stereoscopic heights of the top of an Oklahoma thunderstorm were computed, finding that high cloud tops are not always characterized by very cold IR temperature. The identical method was also applied to the computation of stereo heights based on GOES West and GMS stereo pairs obtained under the NASA-JAPAN cooperative program. It was found that stereo techniques are extremely useful in understanding the structure of thunderstorms in the United States, as well as that of hurricanes over the South Pacific.

Fujita, T. T.↗

Analytical prediction of aerothermal environment in a wing-elevon cove

The fluid/thermal environment in the cove between the wing and elevon surfaces was a concern throughout the design and initial operational phases of the space shuttle. Experimenal and analytical investigations provided some understanding of the environmental in the wing-elevon cove. An incompressible finite element analysis of flow through straight parallel walls and curved parallel walls to determine the effects of cove geomtry on the fluid/thermal environment is described. Results from this analysis agree qualitatively with experimental data. The centerline gas temperatures and cold wall heating rates are virtually identical for the two cases indicating that the slight curvature has little effect on the overall thermal environment.

Bey, K. S.↗

Plasma properties of driver gas following interplanetary shocks observed by ISEE-3

Plasma fluid parameters calculated from solar wind and magnetic field data to determine the characteristic properties of driver gas following a select subset of interplanetary shocks were studied. Of 54 shocks observed from August 1978 to February 1980, 9 contained a well defined driver gas that was clearly identifiable by a discontinuous decrease in the average proton temperature. While helium enhancements were present downstream of the shock in all 9 of these events, only about half of them contained simultaneous changes in the two quantities. Simultaneous with the drop in proton temperature the helium and electron temperature decreased abruptly. In some cases the proton temperature depression was accompanied by a moderate increase in magnetic field magnitude with an unusually low variance, by a small decrease in the variance of the bulk velocity, and by an increase in the ratio of parallel to perpendicular temperature. The cold driver gas usually displayed a bidirectional flow of suprathermal solar wind electrons at higher energies.

Zwickl, R. D.↗

HOST liner cyclic facilities: Facility description

A quartz lamp box, a quartz lamp annular rig, and a low pressure liner cyclic can rig planned for liner cyclic tests are described. Special test instrumentation includes an IR-TV camera system for measuring liner cold side temperatures, thin film thermocouples for measuring liner hot side temperatures, and laser and high temperature strain gages for obtaining local strain measurements. A plate temperature of 2,000 F was obtained in an initial test of an apparatus with three quartz lamps. Lamp life, however, appeared to be limited for the standard commercial quartz lamps available. The design of vitiated and nonvitiated preheaters required for the quartz lamp annular rig and the cyclic can test rigs is underway.

Schultz, D.↗

High temperature acoustic levitator

A system is described for acoustically levitating an object within a portion of a chamber that is heated to a high temperature, while a driver at the opposite end of the chamber is maintained at a relatively low temperature. The cold end of the chamber is constructed so it can be telescoped to vary the length (L sub 1) of the cold end portion and therefore of the entire chamber, so that the chamber remains resonant to a normal mode frequency, and so that the pressure at the hot end of the chamber is maximized. The precise length of the chamber at any given time, is maintained at an optimum resonant length by a feedback loop. The feedback loop includes an acoustic pressure sensor at the hot end of the chamber, which delivers its output to a control circuit which controls a motor that varies the length (L) of the chamber to a level where the sensed acoustic pressure is a maximum.

Barmatz, M. B.↗

Vibrational and rotational excitation of CO in comets Nonequilibrium calculations

Ultraviolet observations of atomic carbon in cometary comae show that carbon-bearing compounds must comprise a significant fraction (approximately equal to or greater than 10 percent) of the volatiles. One likely source is CO. This compound is an important constituent of at least some cometary nuclei, even though it may not be the ultimate source of atomic carbon in all comets. Feldman (1983) has suggested that the relative abundance of CO may be one of the few fundamental characteristics which distinguish one comet from another. The present investigation is, therefore, concerned with the vibrational and rotational excitation of the CO molecule in cometary comae. Two previously neglected factors are taken into account in the study. The fractional populations of CO as solutions to time-dependent differential equations are derived, and a nonisothermal and cold kinetic temperature profile for the inner coma is considered.

Chin, G.↗

Nondispersive X-ray spectroscopy and imaging of plasmas using a charge-coupled device

A virtual-phase charge-coupled device (CCD) was used to obtain pinhole images and X-ray spectra of laser-produced, solid target plasmas. With the CCD used in the single-photon counting mode, the spectrum in the energy range 2-10 keV was obtained without a dispersive element. Typical spectra reveal two distinct temperatures: a cold component of approximately 200 eV and a hot component of approximately 5 keV. Also, multiline spectra comprising characteristic line emission (K alpha, K beta) from a multilayer target bombarded by beta-rays were recorded using a three-phase CCD. The results demonstrate the potential of CCDs as imaging spectrometers with application in space, laboratory, and fusion-plasma research.

Marsh, K.↗

The ion-ion acoustic instability

This paper considers the linear theory of ion-acoustic-like instabilities in a homogeneous Vlasov plasma with two ion components, a less dense beam and a more dense core, with a relative drift velocity. Numerical solutions of the full electrostatic dispersion equation are presented, and the properties of the ion-ion acoustic instability are studied in detail. At relatively cold beam temperatures, the instability is fluid-like, but it becomes a beam resonant kinetic instability as the beam temperature becomes of the order of the core temperature; if the mode is unstable, its threshold lies well below the threshold of the electron-ion acoustic instability. An electron temperature anisotropy enhances the instability, and at sufficiently large beam-core relative drift speeds, electron magnetization can either detract from or enhance the instability.

Gary, S. Peter↗

Io plasma torus electrons - Voyager 1

A thermal Maxwellian component of the electron distribution function, together with a suprathermal, non-Maxwellian one, are featured in the present analysis of in situ plasma electron observations made by the Voyager 1 plasma science experiment in the Io plasma torus. A large difference in the hot electron pressure P(H) is noted between the inbound and the outbound data; this is interpreted as a latitudinal gradient, with P(H) being maximum at the magnetic equator. The presence of a neutral corona around Io is inferred from the observed decrease and symmetry with respect to Io of the cold electron temperature.

Sittler, E. C., Jr.↗

An adiabatic demagnetization refrigerator for SIRTF

An adiabatic demagnetization refrigerator (ADR) has been proposed to cool bolometric infrared detectors on the multiband imaging photometer of the Space Infrared Telescope Facility (SIRTF). One such refrigerator has been built which uses a ferric ammonium alum salt pill suspended by nylon threads in a 3-T solenoid. The resonant modes of this suspension are above 100 Hz. The heat leak to the salt pill is less than 0.5 microW. The system has a hold time at 0.1K of more than 12 h. The cold stage temperature is regulated with a feedback loop that controls the magnetic field. A second, similar refrigerator is being built at a SIRTF prototype to fly on a ballon-borne telescope. It will use a ferromagnetic shield. The possibility of using a high-Tc solenoid-actuated heat switch is also discussed.

Timbie, P. T.↗

Multiparameter radar and passive microwave radiometric comparisons of convection during COHMEX

The Cooperative Huntsville Meteorological Experiment conducted in the summer of 1986 obtained radar and aircraft measurements of convective storms. Observations are presented for a case of isolated thunderstorms which were in their early maturity or early dissipation stages during observation aircraft overpasses. The reflectivity core in these storms descended to the ground, coinciding with an increase in differential reflectivity and linear depolarization ratio below the freezing level. The high reflectivity regions were well colocated with cold brightness temperature anomalies in the passive microwave aircraft data.

Fulton, Richard↗

Episodic total ozone minima and associated effects on heterogeneous chemistry and lower stratospheric transport

Three-dimensional model simulations are used to describe the January 31, 1989 ozone minihole over Stavanger, Norway. This minihole is typical of many transient events in the lower stratosphere that arise because of cyclonic-scale disturbances in the troposphere. Although the ozone reduction is a short-lived reversible dynamical event, through heterogeneous chemical processes there can be a significant transfer of chlorine from reservoir molecules to active radicals. This chemically perturbed air is defined as processed air, and it is found that a single event can produce enough processed air to reduce the HCl in the entire polar vortex. Chemical processing on clouds associated with transient events is shown to be a major source of processed air in the polar vortex in December before background temperatures are cold enough for more uniform heterogeneous conversion.

Rood, Richard B.↗

Optical system design for a Lunar Optical Interferometer

The moon offers particular advantages for interferometry, including a vacuum environment, a large stable base on which to assemble multi-kilometer baselines, and a cold nighttime temperature to allow for passive cooling of optics for high IR sensitivity. A baseline design for a Lunar Optical Interferometer (LOI) which exploits these features is presented. The instrument operates in the visible to mid-IL region, and is designed for both astrometry and synthesis imaging. The design uses a Y-shaped array of 12 siderostats, with maximum arm lengths of about 1 km. The inner siderostats are monitored in three dimensions from a central laser metrology structure to allow for high precision astrometry. The outer siderostats, used primarily for synthesis imaging, exploit the availability of bright reference stars in order to determine the instrument geometry. The path delay function is partitioned into coarse and fine components, the former accomplished with switched banks of range mirrors monitored with an absolute laser metrology system, and the latter with a short cat's eye delay line. The back end of the instrument is modular, allowing for beam combiners for astrometry, visible and IR synthesis imaging, and direct planet detection. With 1 m apertures, the instrument will have a point-source imaging sensitivity of about 29 mag; with the laser metrology system, astrometry at the microarcsecond level will be possible.

Colavita, M. M.↗