Search NASA⌕ Search

SEARCH · Search NASA

Results for “compression rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Isothermal Martensitic and Pressure-Induced Delta to Alpha-Prime Phase Transformations in a Pu-Ga Alloy

A well-homogenized Pu-2 at.% Ga alloy can be retained in the metastable face-centered cubic {delta} phase at room temperature. Ultimately, this metastable {delta} phase will decompose via a eutectoid transformation to the thermodynamically stable monoclinic {alpha} phase and the intermetallic compound Pu{sub 3}Ga over a period of approximately 10,000 years [1]. In addition, these low solute-containing {delta}-phase Pu alloys are metastable with respect to an isothermal martensitic phase transformation to the {alpha}{prime} phase during low temperature excursions [2, 3] and are also metastable with respect to a {delta} {yields} {alpha}{prime} phase transformation with increases in pressure [3-5]. The low temperature {delta} {yields} {alpha}{prime} isothermal martensitic phase transformation in the Pu-2 at.% Ga alloy only goes to {approx}25% completion with the resultant {approx}20 {micro}m long by 2 {micro}m wide lath-shaped {alpha}{prime} particles dispersed within the {delta} matrix. In recently reported studies, Faure et al. [4] have observed a {delta} {yields} {gamma} {yields} {alpha}{prime} pressure-induced phase transformation sequence during a diamond anvil cell investigation and, based on x-ray diffraction and density and compressibility experiments, Harbur [5] has concluded that both {alpha}{prime} and an amorphous phase are present in samples that were pressurized and recovered. In this work, a large volume moissanite anvil cell is constructed to permit the pressurization and recovery of specimens of a size suitable for TEM and electron diffraction studies. The cell, shown in Fig. 1, has an overall diameter of 101.6 mm, a moissanite anvil diameter of 9.00 mm, a culet size of 3 mm, and a spring steel gasket 0.5 mm thick with a hole diameter of 2.5 mm. A 2.3 mm diameter by 100 {micro}m thick sample of {delta}-phase Pu-2 at.% Ga is compressed at a rate of approximately 0.05 GPa/minute to {approx}1 GPa to induce the phase transformation to {alpha}{prime}. Optical microscopy of the recovered specimen reveals a very fine microstructure that appears to be single phase, although the resolution of this technique is insufficient to differentiate between single and multiple phases if the grain size is below approximately 1 {micro}m. X-ray diffraction, using a laboratory Cu K{sub {alpha}} source with wavelength of 1.542{angstrom}, shows the monoclinic reflections from the {alpha}{prime} phase, strong peaks from the aluminum specimen holder, and weak peaks from the face-centered cubic {delta} phase as shown in Fig. 2. The recovered specimen is prepared for TEM and electron diffraction studies as described in Moore et al. [6]. TEM reveals small regions of {delta} phase with a very high dislocation density interspersed between the 10-100's nm {alpha}{prime} grains as shown in Fig. 3. Electron diffraction, shown in the insert in Fig. 3, clearly reveals the presence of the {delta} phase. This microstructure is in contrast to the {alpha}{prime} particles that form as a result of the low-temperature isothermal martensite in which the {alpha}{prime} particles are lath-shaped and significantly larger as shown in the optical micrograph in Fig. 4 of a sample cooled to -120 C and held for 10 hours. In these preliminary results, there is no evidence of either an amorphous phase, as suggested by Harbur [5], or the presence of a {gamma} phase. We expected to observe an amorphous phase based on the similarity of this experiment to that of Harbur [5]. It is possible that the {gamma} phase, as reported by Faure et al. [4], does form as an intermediate, but it is not retained to ambient pressure.

36 MATERIALS SCIENCE↗

A Modified Johnson–Cook Constitutive Model for the Compressive Flow Behaviors of the SnSbCu Alloy at High Strain Rates

The SnSbCu alloy is widely used as the material for the main bearing in low-speed marine engines, and an accurate constitutive model is the foundation for studying the frictional behaviors of bearings. In this work, the compressive flow behaviors of the SnSbCu alloy were considered under the different strain rates (1000-5000 s{sup −1}) and temperatures (20-110 °C) by quasi-static and split-Hopkinson pressure bar dynamic compression tests. First, the original Johnson–Cook model was used to describe the constitutive relation of the SnSbCu alloy at high strain rates, and the results predicted by the original model showed relatively large errors compared with the experimental results since the coupled effect of temperature and strain rate was omitted. Then, a modified Johnson–Cook constitutive model was developed to describe the compressive flow behaviors of the SnSbCu alloy, and the results predicted by this modified model agreed well with the experimental data. Moreover, a finite element analysis was also conducted to verify the accuracy of the modified Johnson–Cook model.

36 MATERIALS SCIENCE↗

Study of $\langle {p}_{\text{T}}\rangle$ and its higher moments, and extraction of the speed of sound in Pb-Pb collisions with ALICE

Ultrarelativistic heavy-ion collisions produce a state of hot and dense strongly interacting QCD matter called quark-gluon plasma (QGP). On an event-by-event basis, the volume of the QGP in ultracentral collisions is mostly constant, while its total entropy can vary significantly due to quantum fluctuations, leading to variations in the temperature of the system. Exploiting this unique feature of ultracentral collisions allows for the interpretation of the correlation of the mean transverse momentum ($\langle$p T $\rangle$) of produced charged hadrons and the number of charged hadrons as a measure for the speed of sound, c s . This speed is related to the rate at which compression waves travel in the QGP and is determined by fitting the relative increase in $\langle$p T $\rangle$ with respect to the relative change in the average charged-particle density ($\langle$dN ch /dη$\rangle$) measured at mid-rapidity. This study reports the event-average $\langle$p T $\rangle$ of charged particles as well as the variance, skewness, and kurtosis of the event-by-event transverse momentum per charged particle ([p T ]) distribution in ultracentral Pb-Pb collisions at a center-of-mass energy of 5.02 TeV per nucleon pair using the ALICE detector. Different centrality estimators based on charged-particle multiplicity or the transverse energy of the event are used to select ultracentral collisions. By ensuring a pseudorapidity gap between the region used to define the centrality and the region used to perform the measurement, the influence of biases and their potential effects on the rise of the mean transverse momentum is tested. The measured c$^{2}_{s}$ is found to strongly depend on the exploited centrality estimator and ranges between 0.1146±0.0028 (stat.)±0.0065 (syst.) and 0.4374±0.0006 (stat.)±0.0184 (syst.) in natural units. The self-normalized variance shows a steep decrease towards ultracentral collisions, while the self-normalized skewness variables show a maximum, followed by a fast decrease. These non-Gaussian features are understood in terms of the vanishing of the impact-parameter fluctuations contributing to the event-to-event [p T ] distribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Strain control of oxygen kinetics in the Ruddlesden-Popper oxide La 1.85 Sr 0.15 CuO 4

Oxygen defect control has long been considered an important route to functionalizing complex oxide films. However, the nature of oxygen defects in thin films is often not investigated beyond basic redox chemistry. One of the model examples for oxygen-defect studies is the layered Ruddlesden–Popper phase La 2-x Sr x CuO 4-δ (LSCO), in which the superconducting transition temperature is highly sensitive to epitaxial strain. However, previous observations of strain-superconductivity coupling in LSCO thin films were mainly understood in terms of elastic contributions to mechanical buckling, with minimal consideration of kinetic or thermodynamic factors. Here, we report that the oxygen nonstoichiometry commonly reported for strained cuprates is mediated by the strain-modified surface exchange kinetics, rather than reduced thermodynamic oxygen formation energies. Remarkably, tensile-strained LSCO shows nearly an order of magnitude faster oxygen exchange rate than a compressively strained film, providing a strategy for developing high-performance energy materials.

36 MATERIALS SCIENCE↗

Laser ablation of iron: A comparison between femtosecond and picosecond laser pulses

In this study, a comparison between femtosecond (fs) and picosecond (ps) laser ablation of electrolytic iron was carried out in ambient air. Experiments were conducted using a Ti:sapphire laser that emits radiation at 785 nm and at pulse widths of 110 ps and 130 fs, before and after pulse compression, respectively. Ablation rates were calculated from the depth of craters produced by multiple laser pulses incident normally to the target surface. Optical and scanning electron microscopy showed that picosecond laser pulses create craters that are deeper than those created by the same number of femtosecond laser pulses at the same fluence. Most of the ablated material was ejected from the ablation site in the form of large particles (few microns in size) in the case of picosecond laser ablation, while small particles (few hundred nanometers) were produced in femtosecond laser ablation. Thermal effects were apparent at high fluence in both femtosecond and picosecond laser ablation, but were less prevalent at low fluence, closer to the ablation threshold of the material. The quality of craters produced by femtosecond laser ablation at low fluence is better than those created at high fluence or using picosecond laser pulses.

36 MATERIALS SCIENCE↗

Geometric dependencies of the mean E × B shearing rate in negative triangularity tokamaks

Abstract This paper presents a comparative study of the poloidal distribution of the mean E × B shearing rate for positive triangularity (PT) and negative triangularity (NT) tokamaks. The effects of flux surface up–down asymmetry due to asymmetric upper and lower triangularities are also considered. Both direct eddy straining and the effects on Shafranov shift feedback loops are examined. Shafranov shift increases the shearing rate at all poloidal angles for all triangularities, due to flux surface compression. The maximum shearing rate bifurcates at a critical triangularity δ crit ( ≲ 0 ) . Thus, the shearing rate is maximal off the outboard midplane for NT, while it is maximal on the outboard midplane for PT. For up–down asymmetric triangularity, the usual up–down symmetry of the shearing rate is broken. The shearing rate at the outboard midplane is lower for NT than for PT, suggesting that the shearing efficiency in NT is reduced. Implications for turbulence stabilisation and confinement improvement in high- β p NT and internal transport barrier discharges are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct numerical simulation and Reynolds-averaged Navier-Stokes modeling of the sudden viscous dissipation for multicomponent turbulence

Simulations of a turbulent multicomponent fluid mixture undergoing isotropic deformations are carried out to investigate the sudden viscous dissipation. This dissipative mechanism was originally demonstrated using simulations of an incompressible single-component fluid [S. Davidovits and N. J. Fisch, Phys. Rev. Lett. 116, 105004 (2016)]. By accounting for the convective and diffusive transfer of various species, the current work aims to increase the physical fidelity of previous simulations and their relevance to inertial confinement fusion applications. Direct numerical simulations of the compressed fluid show that the sudden viscous dissipation of turbulent kinetic energy is unchanged from the single-component scenario. More importantly, the simulations demonstrate that the mass fraction variance and covariance for the various species also exhibit a sudden viscous decay. Reynolds-averaged Navier-Stokes simulations were carried out using the $k - l$ model to assess its ability to reproduce the sudden viscous dissipation. Results show that the standard $k - l$ formulation does not capture the sudden decay of turbulent kinetic energy, mass-fraction variance, and mass-fraction covariance for simulations with various compression and expansion rates, or different exponents for the power-law model of viscosity. A new formulation of the $k - l$ model that is based on previous improvements to the $k - ε$ family of models is proposed, which leads to consistently good agreement with the direct numerical simulations for all the isotropic deformations under consideration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Understanding Particle-Level Physics to Describe the Bulk Compaction Response of Particulate Materials

Current mesoscale models lack the necessary physical parameters to accurately describe the interactions that occur between particles during compaction. This work presents a methodology by which the mechanical and fracture properties of single particles can be determined. Preliminary results for a system of borosilicate glass spheres are presented, illustrating the effect of particle size and strain-rate on the compression response of individual micron-sized particles.

Materials Science(36)↗

A CAM-based LZ data compression IC

A custom CMOS processor is introduced that implements the Data Compression Lempel-Ziv (DCLZ) standard, a variation of the LZ2 Algorithm. This component presently achieves a sustained compression and decompression rate of 10 megabytes/second by employing an on-chip content-addressable memory for string table storage.

Winters, K.↗

Analysis of Compressible Mixing Layers Using Dilatational Covariances Model

Compressible mixing layers are analyzed using a dilatational covariances model based on a pseudo-sound constitutive relation. The calculations are used to evaluate the different physical phenomena affecting compressible mixing layers. The rate of growth of the mixing layer is retarded by both the compressible dissipation and the pressure-dilatational covariances. The pressure-dilatational, essentially a nonequilibrium effect, reduces the amount of excess production over dissipation available for the turbulence energy growth. The pseudo-sound model also includes a history dependent portion: this is also investigated. All constants in the model and used in these computations are predicted by the theory.

Thangam, S.↗

Elastomeric Seal Development for Advanced Docking/Berthing System

Elastomeric seals ar Elastomeric seals are being considered for application to the Advanced Docking / Berthing System. Currently, three candidate elastomers are being evaluated. To meet the unique requirements of the ADBS, several test fixtures have been built to determine each elastomer s Environmental and operating temperature compatibility Material stability when exposed to Atomic Oxygen and Ultraviolet radiation Adhesion force required to separate Compression set Leak rate These results will be compared with those from the metallic seal development to determine the final seal design

Daniels, Christopher↗

Wind-tunnel Tests of the NACA 45-125 Airfoil: A Thick Airfoil for High-Speed Airplanes

Investigations of the pressure distribution, the profile drag, and the location of transition for a 30-inch-chord 25-percent-thick N.A,C.A. 45-125 airfoil were made in the N.A.C.A 8-foot high-speed wind tunnel for the purpose of aiding in the development of a thick wing for high-speed airplanes. The tests were made at a lift coefficient of 0.1 for Reynolds Numbers from 1,750,000 to 8,690,000, corresponding to speeds from 80 to 440 miles per hour at 59 F. The effect on the profile drag of fixing the transition point was also investigated. The effect of compressibility on the rate of increase of pressure coefficients was found to be greater than that predicted by a simplified theoretical expression for thin wings. The results indicated that, for a lift coefficient of 0.1, the critical speed of the N.A.C,A. 45-125 airfoil was about 460 miles per hour at 59 F,. The value of the profile-drag coefficient at a Reynolds Number of 4,500,000 was 0.0058, or about half as large as the value for the N.A,C,A. 0025 airfoil. The increase in the profile-drag coefficient for a given movement of the transition point was about three times as large as the corresponding increase for the N.A.C,A. 0012 airfoil. Transition determinations indicated that, for Reynolds Numbers up to ?,000,000, laminar boundary 1ayers were maintained over approximately 40 percent of the upper and the lower surfaces of the airfoil.

Delano, James B.↗

Development of an Input Suite for an Orthotropic Composite Material Model

An orthotropic three-dimensional material model suitable for use in modeling impact tests has been developed that has three major components elastic and inelastic deformations, damage and failure. The material model has been implemented as MAT213 into a special version of LS-DYNA and uses tabulated data obtained from experiments. The prominent features of the constitutive model are illustrated using a widely-used aerospace composite the T800S3900-2B[P2352W-19] BMS8-276 Rev-H-Unitape fiber resin unidirectional composite. The input for the deformation model consists of experimental data from 12 distinct experiments at a known temperature and strain rate: tension and compression along all three principal directions, shear in all three principal planes, and off axis tension or compression tests in all three principal planes, along with other material constants. There are additional input associated with the damage and failure models. The steps in using this model are illustrated composite characterization tests, verification tests and a validation test. The results show that the developed and implemented model is stable and yields acceptably accurate results.

finite element method↗

Exploring lower-cost pathways to economical fusion power

This project, the Plasma Liner Experiment–ALPHA (PLX-α)5,is one of nine projects supported by the ALPHA Program6 of the Advanced Research Projects Agency–Energy (ARPA-E) of the U.S. Department of Energy (DOE). We use innovative, low-cost coaxial plasma guns (Fig. 1), developed and built by partner HyperV Technologies Corp.7, to launch a spherically converging array of supersonic plasma jets toward the middle of a large, spherical vacuum chamber (Fig. 2). A key near-term goal of PLX-α is to merge up to 60 plasma jets to form a spherically imploding plasma liner, as a low-cost, high-shot-rate driver for compressing magnetised target plasmas to fusion conditions. Our approach is known as plasma-jet-driven MIF (or PJMIF)8. A new startup company HyperJet Fusion Corporation (which recently received seed funding from Strong Atomics, LLC, a new fusion venture fund) aims to develop PJMIF under continued public and private sponsorship.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

On the source of lunar limb compressions

Magnetic-field measurements made on board the Apollo 15 and 16 subsatellites in low-altitude lunar orbit are used to study compressions of the magnetic field over terminator regions when the moon is in the solar wind. These compressional disturbances occur at just in front of the terminator, but only when specific selenographic regions appear at the lunar limb. The occurrence rate, strength, and position of the compression relative to the limb are different for each source region. Where overlaps of limb-compression occurrence statistics and lunar magnetic-field maps exist, the limb-compression occurrence rates have a high degree of correlation with magnetic-field strength. Thus the most probable cause of limb compressions is deflection of the solar wind by the lunar surface magnetic field as the solar wind flows past the lunar terminators.

Russell, C. T.↗

A surprising proliferation of detwinning in β -tin at extreme loading rates

Integrating data from dynamic compression experiments of condensed matter across three national laboratories has led to insight and quantitative calibration of materials strength over decades of loading rate. For many materials, a single strength model (such as PTW) is sufficient to capture the flow-stress strain rate relationship which is monotonic. Here, we show here that β -tin, a tetragonal metal, exhibits dramatic deviations from this behavior. Naive fitting to a single PTW model is insufficient to capture the behavior; indeed, such resulting inferred flow stress versus strain exhibits a non-monotonic behavior. We suggest a resolution to this by proposing that in β -tin there are important Bauschinger effects arising from favorable conditions for twinning and detwinning. A simple yield surface model when paired with PTW hardening captures the experimental data.

36 MATERIALS SCIENCE↗

A zero-error operational video data compression system

A data compression system has been operating since February 1972, using ATS spin-scan cloud cover data. With the launch of ITOS 3 in October 1972, this data compression system has become the only source of near-realtime very high resolution radiometer image data at the data processing facility. The VHRR image data are compressed and transmitted over a 50 kilobit per second wideband ground link. The goal of the data compression experiment was to send data quantized to six bits at twice the rate possible when no compression is used, while maintaining zero error between the transmitted and reconstructed data. All objectives of the data compression experiment were met, and thus a capability of doubling the data throughput of the system has been achieved.

Kutz, R. L.↗

High temperature irradiation induced creep in Ag nanopillars measured via in situ transmission electron microscopy

Irradiation induced creep (IIC) rates are measured in compression on Ag nanopillar (square) beams in the sink-limited regime. The IIC rate increases linearly with stress at lower stresses, i.e. below ≈2/3 the high temperature yield stress and parabolically with pillar width, L, for L less than ≈300 nm. Here, the data are obtained by combining in situ transmission electron imaging with simultaneous ion irradiation, laser heating, and nanopillar compression. Results in the larger width regime are consistent with prior literature.

36 MATERIALS SCIENCE↗