Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystallization kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Real-Time Diagnostics of 2D Crystal Transformations by Pulsed Laser Deposition: Controlled Synthesis of Janus WSSe Monolayers and Alloys

Energetic processing methods such as hyperthermal implantation hold special promise to achieve the precision synthesis of metastable two-dimensional (2D) materials such as Janus monolayers; however, they require precise control. Here, we report a feedback approach to reveal and control the transformation pathways in materials synthesis by pulsed laser deposition (PLD) and apply it to investigate the transformation kinetics of monolayer WS 2 crystals into Janus WSSe and WSe 2 by implantation of Se clusters with different maximum kinetic energies (<42 eV/Se-atom) generated by laser ablation of a Se target. Real-time Raman spectroscopy and photoluminescence are used to assess the structure, composition, and optoelectronic quality of the monolayer crystal as it is implanted with well-controlled fluxes of selenium for different kinetic energies that are regulated with in situ ICCD imaging, ion probe, and spectroscopy diagnostics. First-principles calculations, XPS, and atomic-resolution HAADF STEM imaging are used to understand the intermediate alloy compositions and their vibrational modes to identify transformation pathways. The real-time kinetics measurements reveal highly selective top-layer conversion as WS 2 transforms through WS 2(1–x) Se 2x alloys to WSe 2 and provide the means to adjust processing conditions to achieve fractional and complete Janus WSSe monolayers as metastable transition states. The general approach demonstrates a real-time feedback method to achieve Janus layers or other metastable alloys of the desired composition, and a general means to adjust the structure and quality of materials grown by PLD, addressing priority research directions for precision synthesis with real-time adaptive control.

2D materials↗
NASA NTRS1994

Troilite formation kinetics and growth mechanism in the solar nebula

Troilite formation via the reaction Fe(s) + H2S(g) + H2(g) is the major mechanism for S retention in grains in the solar nebula. Thermodynamic calculations predict that troilite condenses from a solar composition gas. We present experimental results on the kinetics and growth of troilite crystals on Fe metal at temperature (450-650 C) and composition (50-1000 ppm H2S in H2) conditions similar to those in the solar nebula. The fraction of Fe reacted (based on gravimetric data) is plotted at 450, 505, 575, and 650 C. The thickness change of unreacted iron (measured by optical microscopy) is plotted at 575 and 650 C vs. time. the weight change per unit area varies as the square root of time at the lower temperatures and varies linearly with time at the highest temperature. The growth behavior along the lower isotherms is due to diffusion. This behavior suggests sulfide diffusion to the metal-sulfide interface and suggests Fe(2+) diffusion to the sulfide-gas interface. The reaction along the highest isotherm appears to be interface controlled. The formation of troilite crystals is a rapid process forming measurable layers in a few hours. The crystalgrowth is complicated. Initially there are intergrowths of troilite into the pure Fe metal. As the reaction progresses two distinct layers of troilite crystals form. One is in contact with the Fe metal and consists of small randomly oriented crystals with pore space between them. The outermost layer contains large crystals that are all oriented in the same direction. The intergrowth layer is much smaller at 650 C than at 575 C. This suggest that FeS nucleation is inhibited at the higher temperature, accounting for the initially slower reaction rate. Once nucleated, the reaction kinetics are apparently controlled by the growth of the crystals at the interface.

Lauretta, D. S.↗
DOE OSTI2024

Systematic discovery of new nano-scale metastable intermetallic eutectic phases in laser rapid solidified Aluminum-Germanium alloy

Laser surface remelting of as-cast Al-Ge eutectic alloy is shown to produce ultrafine lamellar eutectic morphology with interlamellar spacing refined up to ∼60 nm and composed of FCC Al solid solution and unusual Al x Ge y intermetallic phases that do not form during near-equilibrium solidification. The microstructures are characterized and analyzed using a combination of selected area electron diffraction, high-resolution scanning transmission electron microscopy, energy dispersive X-ray spectroscopy to obtain high-resolution elemental maps, and atomistic modeling using density functional theory followed by atomic-scale image simulation. Depending on the local solidification conditions, the crystallography of the Al x Ge y intermetallic phases in the eutectic microstructure is either monoclinic (C 2/c) or monoclinic (P 2 1 ), with high densities of defects in both cases. This is in sharp contrast to the as-cast alloys that showed nominally pure Al and Ge phases with significant solute partitioning and equilibrium FCC and diamond cubic crystal structures, respectively. Corresponding kinetic phase diagrams are proposed to interpret the evolution of nano-lamellar eutectic morphologies with equilibrium Al and metastable Al x Ge y phases, and to explain increased solid solubility in the Al phases manifested by precipitation of ultrafine clusters of Ge. Furthermore, the reasons for the formation of these metastable eutectics under laser rapid solidification are discussed from the perspective of the competitive growth criterion.

Al-Ge eutectic↗
DOE OSTI2021

Spectroscopic Determination of Key Energy Scales for the Base Hamiltonian of Chromium Trihalides

The van der Waals (vdW) chromium trihalides (CrX 3 ) exhibit field-tunable, two-dimensional magnetic orders that vary with the halogen species and the number of layers. Their magnetic ground states with proximity in energies are sensitive to the degree of ligand-metal (p-d) hybridization and relevant modulations in the Cr d-orbital interactions. We use soft X-ray absorption (XAS) and resonant inelastic X-ray scattering (RIXS) spectroscopy at Cr L -edge along with the atomic multiplet simulations to determine the key energy scales such as the crystal field 10 Dq and interorbital Coulomb interactions under different ligand metal charge transfer (LMCT) in CrX 3 (X= Cl, Br, and I). Through this systematic study, we show that our approach compared to the literature has yielded a set of more reliably determined parameters for establishing a base Hamiltonian for CrX 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Emerged Metallicity in Molecular Ferromagnetic Wires

Supramolecular engineering bridges molecular assembly with macromolecular charge-transfer salts, promising the design to construct supramolecular architectures that integrate cooperative properties difficult or impossible to find in conventional lattices. Here, we report the crystal engineering design and kinetic growth of one-dimensional supramolecular wires composed of bis(ethylenedithio)tetrathiafulvalene (ET + ) cation and polymeric Cu[N(CN) 2 ] 2 – anion. A bulk ferromagnetic order is discovered for filling up the gap where strong ferromagnetism is missing in such ET molecule-based charge-transfer salts. Metallicity is induced by electric current from the semiconducting wire, which is attributed to strain effect by tuning its close molecular contact. This structural feature is evidenced through the combination of various mechanistic spectroscopic studies. Further, electric dipole is established from the close molecular contacts and is suggestive to stabilize ferromagnetic spin interaction through anions bridging spin sites. The breakthrough shown here provides a pathway to explore low-dimensional supramolecular materials exhibiting strong electron correlation, metallicity, and ferromagnetism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Mobile loop dynamics in adenosyltransferase control binding and reactivity of coenzyme B 12

Cobalamin is a complex organometallic cofactor that is processed and targeted via a network of chaperones to its dependent enzymes. AdoCbl (5'-deoxyadenosylcobalamin) is synthesized from cob(II)alamin in a reductive adenosylation reaction catalyzed by adenosyltransferase (ATR), which also serves as an escort, delivering AdoCbl to methylmalonyl-CoA mutase (MCM). The mechanism by which ATR signals that its cofactor cargo is ready (AdoCbl) or not [cob(II)alamin] for transfer to MCM, is not known. In this study, we have obtained crystallographic snapshots that reveal ligand-induced ordering of the N terminus of Mycobacterium tuberculosis ATR, which organizes a dynamic cobalamin binding site and exerts exquisite control over coordination geometry, reactivity, and solvent accessibility. Cob(II)alamin binds with its dimethylbenzimidazole tail splayed into a side pocket and its corrin ring buried. The cosubstrate, ATP, enforces a four-coordinate cob(II)alamin geometry, facilitating the unfavorable reduction to cob(I)alamin. The binding mode for AdoCbl is notably different from that of cob(II)alamin, with the dimethylbenzimidazole tail tucked under the corrin ring, displacing the N terminus of ATR, which is disordered. In this solvent-exposed conformation, AdoCbl undergoes facile transfer to MCM. The importance of the tail in cofactor handover from ATR to MCM is revealed by the failure of 5'-deoxyadenosylcobinamide, lacking the tail, to transfer. In the absence of MCM, ATR induces a sacrificial cobalt–carbon bond homolysis reaction in an unusual reversal of the heterolytic chemistry that was deployed to make the same bond. Finally, the data support an important role for the dimethylbenzimidazole tail in moving the cobalamin cofactor between active sites.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Se diffusion in CdTe thin films for photovoltaics

Manipulating CdSeTe bandgrading to enhance photocurrent and carrier lifetime is an essential part of high-performance CdTe photovoltaics (PVs). Here, we examine Se diffusion kinetics in single-crystal and polycrystalline CdTe during deposition, thermal annealing, and CdCl 2 treatments. Se distributions are determined by dynamic secondary-ion-mass spectroscopy and Auger electron spectroscopy depth profiling and coupled with electron backscatter diffraction images of the crystalline structure. Effective bulk and grain boundary diffusion coefficients are determined by analytical models and discussed in the context of processing and film morphology. Se is found to diffuse in CdTe at much higher rates during CdCl 2 treatments than with thermal processing alone. GB diffusion also occurs at a significantly faster rate than bulk diffusion. As a result of these two effects, the near interface bulk and GB Se diffusion during CdCl 2 treatments dominates the bandgrading profiles in CdTe PVs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Characterization of Partial Charge Collection Induced by Neutron Damage in High-Purity Germanium Detectors

This paper investigates the correlation of damage induced by neutron interactions and degradation in the spectra of HPGe detectors. As neutrons kinetically interact with germanium crystals, they create interstitial and vacancy defects within the lattice. These defects then interfere with the charge migration of electron-hole pairs and reduce resolution in the observed energy spectrum. The partial charge collection produces observable spectral changes by increasing the peak width and reducing resolution (full width half maximum). A detailed characterization using various check sources was performed before and after iterations of neutron exposure in order to observe the effects of the neutron damage. An additional set of measurements was performed along with characterizations to show the detector’s response at discrete locations on the HPGe crystal. This was done to observe how the spectrum changes when the gamma rays are isolated to regions of various thicknesses of germanium. In order to impart damage, the detector was placed inside a californium shuffler with the face of the detector against the guide tube for the 252 Cf source. For irradiation of the HPGe, the source was then positioned in front of the face of the detector using the stepper motor of the shuffler. The neutron exposure time intervals were recorded and increased based on the initial damage observed. An MCNP simulation was performed to estimate the amount of interactions that occurred in the germanium crystal to ensure enough damage had occurred. Studying the effects that neutron damage imparts on a bullet-type HPGe detector can help provide necessary data to estimate total neutron exposure limits, reduce the likelihood of decisions made on suspect data, and aid in diagnostics of a damaged detector.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Benzoimidazolium-derived dimeric and hydride n-dopants for organic electron-transport materials: impact of substitution on structures, electrochemistry, and reactivity

1,3-Dimethyl-2,3-dihydrobenzo[ d ]imidazoles, 1H , and 1,1',3,3'-tetramethyl-2,2',3,3'-tetrahydro-2,2'-bibenzo[ d ]imidazoles, 1 2 , are of interest as n-dopants for organic electron-transport materials. Salts of 2-(4-(dimethylamino)phenyl)-4,7-dimethoxy-, 2-cyclohexyl-4,7-dimethoxy-, and 2-(5-(dimethylamino)thiophen-2-yl)benzo[ d ]imidazolium ( 1g–i + , respectively) have been synthesized and reduced with NaBH 4 to 1gH , 1hH , and 1iH , and with Na:Hg to 1g 2 and 1h 2 . Their electrochemistry and reactivity were compared to those derived from 2-(4-(dimethylamino)phenyl)- ( 1b + ) and 2-cyclohexylbenzo[ d ]imidazolium ( 1e + ) salts. E ( 1 + / 1 • ) values for 2-aryl species are less reducing than for 2-alkyl analogues, i.e., the radicals are stabilized more by aryl groups than the cations, while 4,7-dimethoxy substitution leads to more reducing E ( 1 + / 1 • ) values, as well as cathodic shifts in E ( 1 2 •+ / 1 2 ) and E ( 1H •+ / 1H ) values. Both the use of 3,4-dimethoxy and 2-aryl substituents accelerates the reaction of the 1H species with PC 61 BM. Because 2-aryl groups stabilize radicals, 1b 2 and 1g 2 exhibit weaker bonds than 1e 2 and 1h 2 and thus react with 6,13-bis(triisopropylsilylethynyl)pentacene ( VII ) via a “cleavage-first” pathway, while 1e 2 and 1h 2 react only via “electron-transfer-first”. 1h 2 exhibits the most cathodic E ( 1 2 •+ / 1 2 ) value of the dimers considered here and, therefore, reacts more rapidly than any of the other dimers with VII via “electron-transfer-first”. Crystal structures show rather long central C–C bonds for 1b 2 (1.5899(11) and 1.6194(8) Å) and 1h 2 (1.6299(13) Å).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Chapmanite [Fe 2 Sb(Si 2 O 5 )O 3 (OH)]: thermodynamic properties and formation in low-temperature environments

Abstract. of synthetic Sb 2 O 5 , MgSb 2 O 6 (analogue of the mineral byströmite), Mg[Sb(OH) 6 ] 2 ∙6H 2 O (brandholzite), and natural chapmanite [(Fe 1.88 Al 0.12 )Sb(Si 2 O 5 )O 3 (OH)]. Enthalpies of reactions, including formation enthalpies, were evaluated using reference compounds Sb, Sb 2 O 3 , Sb 2 O 5 , and other phases, with high-temperature oxide melt solution calorimetry in lead borate and sodium molybdate solvents. Heat capacity and entropy were determined by relaxation and differential scanning calorimetry. The best set of Δ f H o (kJ mol -1 ) and S o (J mol -1 K -1 ) is byströmite -1733.0±3.6, 139.3±1.0; brandholzite -5243.1±3.6, 571.0±4.0; and chapmanite -3164.9±4.7, 305.1±2.1. The data for chapmanite give Δ f G o of -2973.6±4.7 kJ mol -1 and log K=-17.10 for the dissolution reaction (Fe 1.88 Al 0.12 )Sb(Si 2 O 5 )O 3 (OH) + 6H + → 1.88Fe 3+ + 0.12Al 3+ + 2SiO$_2^0$ + Sb(OH)$_3^0$ + 2H 2 O. Analysis of the data showed that chapmanite is finely balanced in terms of its stability with schafarzikite (FeSb 2 O 4 ) and tripuhyite (FeSbO 4 ) under a specific, narrow range of conditions when both aqueous Fe(III) and Sb(III) are abundant. In such a model, chapmanite is metastable by a narrow margin but could be stabilized by high SiO$_2^0$(aq) activities. Natural assemblages of chapmanite commonly contain abundant amorphous silica, suggesting that this mechanism may be indeed responsible for the formation of chapmanite. Chapmanite probably forms during low-temperature hydrothermal overprint of pre-existing Sb ores under moderately reducing conditions; the slightly elevated temperatures may help to overcome the kinetic barrier for its crystallization. During weathering, sheet silicates may adsorb Sb 3+ in tridentate hexanuclear fashion, thus exposing their chapmanite-like surfaces to the surrounding aqueous environment. Formation of chapmanite, as many other sheet silicates, under ambient conditions, is unlikely.

58 GEOSCIENCES↗
NASA NTRS1999

Thermophysical Property Measurements of Molten Semiconductors in 1-g and Reduced-g Condition

Understanding and controlling the formation kinetics of varieties of crystal imperfections such as point defects, non uniform distribution of doping atoms, and impurity atoms in growing crystals are very important. Theoretical (numerical) modeling of the crystal growth process is an essential step to achieving these objectives. In order to obtain reliable modeling results, input parameters, i.e. various thermophysical parameters, must be accurate. The importance of accurate thermophysical properties of semiconductors in crystal growth cannot be overly emphasized. The total hemispherical emissivity, for instance, has a dramatic impact on the thermal environment. It determines the radiative emission from the surface of the melt which determines to a large extent the profile of the solidified crystal. In order to understand the convection and the turbulence in a melt, viscosity becomes an important parameter. The liquid surface tension determines the shape of the liquid-atmosphere interface near the solid-liquid-atmosphere triple point. Currently used values for these parameters are rather inaccurate, and this program intends to provide more reliable measurements of these thermophysical properties. Thus, the objective of this program is in the accurate measurements of various thermophysical properties which can be reliably used in the modeling of various crystal growth processes. In this program, thermophysical properties of molten semiconductors, such as Si, Ge, Si-Ge, and InSb will be measured as a function of temperature using the High Temperature Electrostatic Levitator at JPL. Each material will be doped by different kinds of impurities at various doping levels. Thermophysical properties which will be measured include: density, thermal expansion coefficient, surface tension, viscosity, specific heat, hemispherical total emissivity, and perhaps electrical and thermal conductivities. Many molten semiconductors are chemically reactive with crucibles. As a result, these dispersed impurities in the melts tend to substantially modify the properties of pure semiconductors. Sample levitation done in a vacuum clearly helps maintain the sample purity. However, in the 1-g environment, all gravity caused effects such as convection, sedimentation and buoyancy are still present in the sample. In addition, large forces needed to levitate a sample in the presence of the gravity can cause additional flows in the melt. The use of the High Temperature Electrostatic Levitator (HTESL) for the present research is a recent development and little is known about the flows induced by the electrostatic forces. In this ground base program, we will define the limits of HTESL technology as various thermophysical properties of molten semiconductors are measured.

Rhim, Won-Kyu↗
NASA NTRS1987

Analyzing Nonisothermal Crystallization of Thermoplastics

Method developed for analysis of nonisothermal cold crystallization in thermoplastics. Does not require prior knowledge of isothermal kinetic parameters. Based upon observation: During nonisothermal crystallization at constant rate, relative crystallinity develops with time dependence sigmoidal at low degrees of conversion. Application for method is study of cold crystallization in advanced thermoplastics.

Cebe, Peggy↗
DOE OSTI2026

Mapping Interfacial Solution Forces that Drive Fluorescent Nanoparticle Incorporation into Crystals

Interfacial solution structure governs processes ranging from catalytic and electrochemical reactions to particle aggregation and crystallization. Here, we design bio-inspired nanocomposites by mapping interfacial forces and controlling nanoparticle incorporation during crystal growth. Our analytical model contains measured kinetic barriers for surface approaches and equilibrium binding constants with the crystal surface. We validate this model using fluorescent silica nanoparticles and calcite. Our results show that surface chemistry dictates incorporation pathways: methoxy groups are least favorable, hydroxyls reduce kinetic barriers by interacting favorably with hydration layers, carboxylates bind strongly but must overcome a kinetic barrier, and amines outperform all kinetically and thermodynamically. This framework resolves the interplay between interfacial solution structures, particle forces and dynamics, and growth kinetics, enabling predicative control of nanocomposite formation and multiplexed mixed-particle systems.

Zhang, Mingyi [Pacific Northwest National Laborato↗