Search NASA⌕ Search

SEARCH · Search NASA

Results for “data book”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Review of the Digital Inject Book

The DIB greatly simplifies some aspects of generating inject data and also enables one to rapidly make changes to the scenario and generate new data. The underlying code for generating gamma ray inject data is GADRAS, while the underlying code for generating most of the neutron inject data is SrcSim. Since GADRAS has been around for a significant period of time and has a relatively large user base, reviewing GADRAS itself was considered out of scope for this TI project. However, how the DIB utilizes and interfaces with GADRAS to generate the inject data was considered to be in scope. SrcSim on the other hand does not have the same kind of pedigree as GADRAS and has not been as widely evaluated. Therefore, this review will cover not only how the DIB interfaces with SrcSim, but also the SrcSim code itself.

07 ISOTOPE AND RADIATION SOURCES↗

The status of the international Halley watch

More than 1000 professional astronomers worldwide actually observed Halley's comet from the ground. Preliminary logs from the observers indicate that 20-40 Gbytes of data were acquired in eight professional disciplines and as much as 5 Gbytes in the amateur network. The latter will be used to fill in gaps in the Archive and to provide a visual light curve. In addition roughly 400 Mbytes of data were taken on Comet Giacobini-Zinner. Data will be accepted for archiving until early 1989. The permanent archive will consist of a set of CD-ROMs and a set of books, publication of both to be completed by mid-1990. Data from the space missions will be included but only on the CDs. From every indication, the ground based effort and the space missions complimented each other beautifully, both directly in the solution of spacecraft navigation problems and indirectly in the solution of scientific problems. The major remaining concern is that scientists submit their data to the Archive before the 1989 deadline.

Newburn, Ray L., Jr.↗

Toward a Smart Metaverse City: Immersive Realism and 3D Visualization of Digital Twin Cities

Metaverse and its related extended reality technologies can enable immersive, realistic, and participatory visualization of 3D data, and their use and the potential within a smart city can be effective for supporting urban research and urban operations management. This book chapter describes a vision for prototyping a “Smart Metaverse City” to combine the unique advantage of the Metaverse technology with the two-way connectivity of a digital twin city application. This synergy aims to create a virtual environment for immersive geovisualization to help researchers and the public understand the complex urban system through science-based and data-driven approaches. This book chapter selectively reviews past technological and paradigm advancements for collecting, analyzing, and visualizing 3D urban big data. Then we present a prototyping Geographic Information System (GIS) framework, together with some relevant data sources and open-source web technologies, to help researchers create a smart Metaverse city. We demonstrate our vision and discuss its application opportunities through a real-world example, a digital twin city developed at the Oak Ridge National Laboratory, to facilitate participatory, smart, and sustainable campus management.

Xu, Haowen↗

A Visual Atlas on Strategic Trade

Strategic trade concerns global trade flows of items with strategic military value. Items include goods with exclusive military use, but also dual-use items that can have both military and civil uses. Many countries require licenses for trade in strategic items as a measure of non-proliferation. For example, items listed for trade control by multilateral export control arrangements, such as the Nuclear Suppliers Group (NSG), typically are considered strategic goods. Analysts and officials involved in strategic trade control often lack quantitative global understanding of relevant trade patterns that would help them focus control and enforcement efforts, select companies for outreach and audit, target transactions for verification and inspection, and assess the potential economic impact of trade control policies. Many are unaware of available open source data on international trade that can inform these issues. Many do not know how to make use of such data or lack the tools necessary to do so. A book of charts dubbed a ‘Strategic Trade Atlas’ was developed to illustrate global trade flows of strategic goods and raise awareness of the availability and utility of open source trade data. The Atlas was prepared for the World Customs Organization (WCO) and its Member States to support their planning and execution of Strategic Trade Control Enforcement (STCE) operations. It offers macroscopic graphical representations of global trade flows classified under Harmonized System (HS) codes associated by the WCO with commodities described in its STCE Implementation Guide. While these HS codes are understood to also encompass many non-strategic items, they nevertheless provide a good overview of potentially strategic trade flows. These include HS codes covering nuclear and nuclear-related commodities listed by the NSG, such as uranium, heavy water, graphite, carbon fiber, nickel powder, beryllium, aluminum tubes, vacuum pumps, valves, machine tools, cameras, and many others. The Atlas uses trade data from the Base pour l’Analyse du Commerce International (BACI), a statistical elaboration of public UN Comtrade data. BACI data reconciles trade flows, taking into account asymmetries in import and export trade valuation. The data visualization approach facilitates rapid sense making, pattern recognition, and anomaly detection. Country-based profiles summarize vast amounts of data into readily understandable graphical representations of each country’s primary strategic imports and exports and their main trading partners. Commodity-based profiles provide a global view of major exporters, importers, and trade patterns for each commodity. These insights can inform the risk management approach employed by customs to allocate enforcement and compliance efforts.

customs controls↗

Snowex 2017 Community Snow Depth Measurements: A Quality-Controlled, Georeferenced Product

Snow depth was one of the core ground measurements required to validate remotely-sensed data collected during SnowEx Year 1, which occurred in Colorado. The use of a single, common protocol was fundamental to produce a community reference dataset of high quality. Most of the nearly 100 Grand Mesa and Senator Beck Basin SnowEx ground crew participants contributed to this crucial dataset during 6-25 February 2017. Snow depths were measured along ~300 m transects, whose locations were determined according to a random-stratified approach using snowfall and tree-density gradients. Two-person teams used snowmobiles, skis, or snowshoes to travel to staked transect locations and to conduct measurements. Depths were measured with a 1-cm incremented probe every 3 meters along transects. In shallow areas of Grand Mesa, depth measurements were also collected with GPS snow-depth probes (a.k.a. MagnaProbes) at ~1-m intervals. During summer 2017, all reference stake positions were surveyed with <10 cm accuracy to improve overall snow depth location accuracy. During the campaign, 193 transects were measured over three weeks at Grand Mesa and 40 were collected over two weeks in Senator Beck Basin, representing more than 27,000 depth values. Each day of the campaign depth measurements were written in waterproof field books and photographed by National Snow and Ice Data Center (NSIDC) participants. The data were later transcribed and prepared for extensive quality assessment and control. Common issues such as protocol errors (e.g., survey in reverse direction), notebook image issues (e.g., halo in the center of digitized picture), and data-entry errors (sloppy writing and transcription errors) were identified and fixed on a point-by-point basis. In addition, we strove to produce a georeferenced product of fine quality, so we calculated and interpolated coordinates for every depth measurement based on surveyed stakes and the number of measurements made per transect. The product has been submitted to NSIDC in csv format. To educate data users, we present the study design and processing steps that have improved the quality and usability of this product. Also, we will address measurement and design uncertainties, which are different in open vs. forest areas.

Brucker, L.↗

Study of solid rocket motor for space, shuttle booster, volume 2, book 4 appendices B thru D

The mass properties and related data for the solid propellant rocket engine for use with the space shuttle are presented. Data for three solid propellant rocket engines are provided. The three designs considered are: (1) baseline parallel burn, (2) optional parallel burn, and (3) baseline series burn. Layouts of the respective designs to show design and dimensional data are included.

Source record↗

Astronomy sortie missions definition study. Volume 3, book 2: Appendix: Design analysis and trade studies

Backup or supporting data for the design analyses and trade studies which defined the astronomy sortie missions are presented. The subjects discussed are: (1) configuration of space shuttle orbiter, (2) electronic subsystems, (3) electric power requirements, and (4) payload requirements. Mathematical models are developed to illustrate the orbital rendezvous capabilities.

Source record↗

Detector Channel Combining Results from a High Photon Efficiency Optical Communications Link Test Bed

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is developing a low cost, scalable, photon-counting receiver prototype for space-to-ground optical communications links. The receiver is being tested in a test bed that emulates photon-starved space-to-ground optical communication links. The receiver uses an array of single-pixel fiber-coupled superconducting nanowire single-photon detectors. The receiver is designed to receive the high photon efficiency serially concatenated pulse position modulation (SCPPM) waveform specified in the Consultative Committee for Space Data Systems (CCSDS) Optical Communications Coding and Synchronization Blue Book Standard. The optical receiver consists of an array of single-pixel superconducting nanowire detectors, analog phase shifters for channel alignment, digitizers for each detector channel, and digital processing of the received signal. An overview of the test bed and arrayed receiver system is given. Simulation and system characterization results are presented. The data rate increase of using a four-channel arrayed detector system over using one single pixel nanowire detector is characterized. Results indicate that a single-pixel detector is capable of receiving data at a rate of 40 Mbps and a four-channel arrayed detector system is capable of receiving data at a rate of 130 Mbps.

Downey, Jennifer N.↗

Detector Channel Combining Results from a High Photon Efficiency Optical Communications Link Test Bed

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is developing a low cost, scalable, photon counting receiver prototype for space-to-ground optical communications links. The receiver is being tested in a test bed that emulates photon-starved space-to-ground optical communication links. The receiver uses an array of single-pixel fiber-coupled superconducting nanowire single-photon detectors. The receiver is designed to receive the high photon efficiency serially concatenated pulse position modulation (SCPPM) waveform specified in the Consultative Committee for Space Data Systems (CCSDS) Optical Communications Coding and Synchronization Blue Book Standard. The optical receiver consists of an array of single-pixel superconducting nanowire detectors, analog phase shifters for channel alignment, digitizers for each detector channel, and digital processing of the received signal. An overview of the test bed and arrayed receiver system is given. Simulation and system characterization results are presented. The data rate increase of using a four-channel arrayed detector system over using one single pixel nanowire detector is characterized. Results indicate that a single-pixel detector is capable of receiving data at a rate of 40 Mbps and a four-channel arrayed detector system is capable of receiving data at a rate of 130 Mbps.

Downey, Jennifer N.↗

2013 White Book, Pacific Northwest Loads and Resources Study (summary)

The 2013 Pacific Northwest Loads and Resources Study (2013 White Book) is BPA's latest projection of the Pacific Northwest regional retail loads, contract obligations, contract purchases, and resource capabilities. The 2013 White Book is a snapshot of conditions as of October 1, 2013, documenting the loads and resources for the Federal system and region for the 10-year study period OY 2014 through 2023. The White Book contains projections of regional and Federal system load and resource capabilities, along with relevant definitions and explanations. The White Book also contains information obtained from formalized resource planning reports and data submittals including those from individual utilities, the Northwest Power and Conservation Council (Council), and the Pacific Northwest Utilities Conference Committee (PNUCC). Starting with the 2012 White Book, BPA changed the annual production schedule for future White Books. BPA is scheduled to publish a complete White Book, which includes a Federal System Needs Assessment analysis, every other year (even years). In the odd-numbered years, BPA will publish a biennial summary update (Supplement) that only contains major changes to the Federal System and Regional System analyses that have occurred since the last White Book. http://www.bpa.gov/power/pgp/whitebook/2013/index.shtml.

bonneville↗

Are Land‐Use Change Emissions in Southeast Asia Decreasing or Increasing?

Abstract Southeast Asia is a region known for active land‐use changes (LUC) over the past 60 years; yet, how trends in net CO 2 uptake and release resulting from LUC activities (net LUC flux) have changed through past decades remains uncertain. The level of uncertainty in net LUC flux from process‐based models is so high that it cannot be concluded that newer estimates are necessarily more reliable than older ones. Here, we examined net LUC flux estimates of Southeast Asia for the 1980s−2010s from older and newer sets of Dynamic Global Vegetation Model simulations (TRENDY v2 and v7, respectively), and forcing data used for running those simulations, along with two book‐keeping estimates (H&N and BLUE). These estimates yielded two contrasting historical LUC transitions, such that TRENDY v2 and H&N showed a transition from increased emissions from the 1980s to 1990s to declining emissions in the 2000s, while TRENDY v7 and BLUE showed the opposite transition. We found that these contrasting transitions originated in the update of LUC forcing data, which reduced the loss of forest area during the 1990s. Further evaluation of remote sensing studies, atmospheric inversions, and the history of forestry and environmental policies in Southeast Asia supported the occurrence of peak emissions in the 1990s and declining thereafter. However, whether LUC emissions continue to decline in Southeast Asia remains uncertain as key processes in recent years, such as conversion of peat forest to oil‐palm plantation, are yet to be represented in the forcing data, suggesting a need for further revision.

54 ENVIRONMENTAL SCIENCES↗

Quantitative Measurements of X-ray Intensity

This chapter describes the characterization of several X-ray sources and their use in calibrating different types of X-ray cameras at National Security Technologies, LLC (NSTec). The cameras are employed in experimental plasma studies at Lawrence Livermore National Laboratory (LLNL), including the National Ignition Facility (NIF). The sources provide X-rays in the energy range from several hundred eV to 110 keV. The key to this effort is measuring the X-ray beam intensity accurately and traceable to international standards. This is accomplished using photodiodes of several types that are calibrated using radioactive sources and a synchrotron source using methods and materials that are traceable to the U.S. National Institute of Standards and Technology (NIST). The accreditation procedures are described. The chapter begins with an introduction to the fundamental concepts of X-ray physics. The types of X-ray sources that are used for device calibration are described. The next section describes the photodiode types that are used for measuring X-ray intensity: power measuring photodiodes, energy dispersive photodiodes, and cameras comprising photodiodes as pixel elements. Following their description, the methods used to calibrate the primary detectors, the power measuring photodiodes and the energy dispersive photodiodes, as well as the method used to get traceability to international standards are described. The X-ray source beams can then be measured using the primary detectors. The final section then describes the use of the calibrated X-ray beams to calibrate X-ray cameras. Many of the references are web sites that provide databases, explanations of the data and how it was generated, and data calculations for specific cases. Several general reference books related to the major topics are included. Papers expanding some subjects are cited.

47 OTHER INSTRUMENTATION↗

The planets of the Solar System

This book is intended both for the lay person and the would-be scientist. The planets are discussed with a comparision of their basic natural features: mechanical characteristics and parameters of movement, surfaces, inner structure, physical properties of the atmosphere and meteorology. Also general problems of planetary cosmogony, thermal history and climatic evolution are considered briefly. The book is based on Soviet and foreign material, data from spacecraft, Earth optical and radio astronomical measurements and also data obtained from theoretical models.

Marov, M. Y.↗

Manned orbital systems concept study. Book 4: Programmatics for extended-duration missions

The cost estimates, schedule data, and funding distributions generated in the Manned Orbital Systems Concepts (MOSC) study are presented. The overall objectives were to examine the requirements for, and to describe, a cost-effective concept for an orbital facility capable of supporting manned operations in earth orbit beyond the 7-to-30-day mission duration provided by the Shuttle/Spacelab system. The cost, schedule, and other programmatic data were developed to provide information useful for their long-range planning activities. The major portion of the data documented and discussed consists of project- and system-level schedule and funding information and also project-, system-, and subsystem-level cost summaries.

Source record↗

Power Analysis for Applications and Data Centers

A portion of a chapter for the High Performance Parallelism Pearls 2 book. By using the NWPerf and CView software developed and deployed at PNNL administrators and users can visually see the performance, and power used by jobs running on a super computer in near-time.

Affinity↗

Are Land-Use Change Emissions in Southeast Asia Decreasing or Increasing?

Southeast Asia is a region known for active land-use changes (LUC) over the past 60 years; yet, how trends in net CO2 uptake and release resulting from LUC activities (net LUC flux) have changed through past decades remains uncertain. The level of uncertainty in net LUC flux from process-based models is so high that it cannot be concluded that newer estimates are necessarily more reliable than older ones. Here, we examined net LUC flux estimates of Southeast Asia for the 1980s−2010s from older and newer sets of Dynamic Global Vegetation Model simulations (TRENDY v2 and v7, respectively), and forcing data used for running those simulations, along with two book-keeping estimates (H&N and BLUE). These estimates yielded two contrasting historical LUC transitions, such that TRENDY v2 and H&N showed a transition from increased emissions from the 1980s to 1990s to declining emissions in the 2000s, while TRENDY v7 and BLUE showed the opposite transition. We found that these contrasting transitions originated in the update of LUC forcing data, which reduced the loss of forest area during the 1990s. Further evaluation of remote sensing studies, atmospheric inversions, and the history of forestry and environmental policies in Southeast Asia supported the occurrence of peak emissions in the 1990s and declining thereafter. However, whether LUC emissions continue to decline in Southeast Asia remains uncertain as key processes in recent years, such as conversion of peat forest to oil-palm plantation, are yet to be represented in the forcing data, suggesting a need for further revision.

land-use change↗